Installation thiab kev khiav hauj lwm phau ntawv

ACS 4.4 G2
Plaub Input, Quad Output Stereo Suab Matrix Switcher

ACS 4.4 G2 Plaub Input Quad Output Stereo Audio Matrix Switcher

Firmware Version 0.3 thiab siab dua
Phau ntawv hloov tshiab: 12/15/2021
Yog tias koj xav tau kev hloov kho firmware, hu rau Broadcast Tools®
Tsis muaj ib feem ntawm cov ntaub ntawv no yuav raug muab luam tawm lossis muab faib yam tsis tau kev tso cai.
Txhua yam kev qhia tshwj xeeb thiab cov yam ntxwv rau cov khoom no yog raug hloov pauv yam tsis tau ceeb toom
CEEB TOOM: Peb pom zoo kom siv Chrome, Firefox lossis Safari ua koj tus browser.
Vim yog qhov xwm txheej zoo ntawm cov khoom tsim, cov ntaub ntawv muaj nyob hauv daim ntawv no yuav raug hloov pauv yam tsis tau ceeb toom. Broadcast Tools, Inc., xav tias tsis muaj lub luag haujlwm rau kev ua yuam kev thiab/lossis kev tso tseg uas muaj nyob hauv daim ntawv no. Kev hloov kho ntawm cov ntaub ntawv no lossis cov ntawv tshiab tuaj yeem raug muab tso tawm kom suav nrog cov kev hloov pauv no.
Broadcast Tools® yog ib lub cim lag luam ntawm Broadcast Tools, Inc.
Tag nrho Sentinel® cov khoom sau npe yog cov cim lag luam ntawm Broadcast Tools, Inc.
Copyright® 1989 – 2022 los ntawm Broadcast Tools, Inc. All rights reserved.
Tsis muaj ib feem ntawm cov ntaub ntawv no yuav raug muab luam tawm lossis muab faib yam tsis tau kev tso cai.
Mus saib www.broadcasttools.com rau cov ntaub ntawv tseem ceeb ntawm cov khoom hloov tshiab.

WEBWEBSITE:
Mus ntsib peb web site rau cov khoom tshiab thiab cov ntaub ntawv ntxiv.

Taw qhia

Ua tsaug rau koj qhov kev yuav khoom ntawm Broadcast Tools® ACS 4.4 G2 Four Input, Quad Output Stereo Audio Matrix Switcher (hu ua ACS 4.4 G2 thoob plaws hauv phau ntawv no). Peb cia siab tias cov khoom no yuav muab rau koj ntau xyoo ntawm kev pab cuam. Phau ntawv no yog npaj los muab rau koj tag nrho cov ntaub ntawv xav tau los nruab thiab ua haujlwm Broadcast Tools® ACS 4.4 G2.

SAFETY IN

FORMATION

Tsuas yog cov neeg ua haujlwm tsim nyog yuav tsum nruab ACS 4.4 G2. Ib qho kev sim rau nruab cov cuab yeej no los ntawm tus neeg uas tsis muaj peev xwm tsim nyog tuaj yeem ua rau muaj kev phom sij rau tus neeg nruab lossis lwm tus neeg ua haujlwm lossis kev puas tsuaj rau ACS 4.4 G2 lossis lwm yam khoom siv. Thov xyuas kom meej tias muaj kev tiv thaiv kev nyab xeeb kom raug ua ntej txhim kho cov cuab yeej no. Yog tias koj tsis paub txog cov khoom siv no, thov hu rau tus kws tsim qauv tsim nyog los tswj kev teeb tsa thiab teeb tsa ntawm ACS 4.4 G2. Broadcast Tools, Inc., tsis tuaj yeem pab txhawb NON-Broadcast Tools software, hardware or NON-Broadcast Tools computer/hardware/software problems. Yog tias koj ntsib cov teeb meem no, thov tshawb xyuas koj phau ntawv qhia kho vajtse / software lossis hu rau nws lub tuam txhab kev txhawb nqa.

LEEJ TWG YUAV TSUM TAU TXAIS KEV PAB

Yog tias koj muaj lus nug txog koj cov khoom lossis koj xav tau kev pab, thov hu rau koj tus neeg muag khoom los ntawm tus neeg koj yuav khoom siv no. Yog tias koj xav paub ntau ntxiv txog BROADCAST TOOLS® cov khoom, koj tuaj yeem hu rau peb ntawm: Broadcast Tools, Inc. 131 State Street Sedro-Woolley, WA 98284-1503 USA
Suab:
360.854.9559
Fax: 866.783.1742 Dr
Internet Lub Tsev: www.broadcasttools.com
E-mail: support@broadcasttools.com

Ua tsaug rau koj xaiv BROADCAST TOOLS® BRAND PRODUCTS!

CEEB TOOM!
Broadcast Tools® Cov Khoom, ib yam li txhua yam khoom siv hluav taws xob, tuaj yeem ua tsis tau yam tsis ceeb toom. Tsis txhob siv cov khoom no nyob rau hauv daim ntawv thov uas muaj kev hem thawj rau lub neej yuav tshwm sim vim tsis ua hauj lwm.
CEEB TOOM:
Phau ntawv no yuav tsum tau nyeem kom meej ua ntej kev teeb tsa thiab kev ua haujlwm.

WEBWEBSITE:
Mus ntsib peb web site rau cov khoom tshiab thiab cov ntaub ntawv ntxiv.

Product Description

Broadcast Tools® ACS 4.4 G2 muab matrix suab hloov ntawm 4 lub tso suab tso suab rau 4 lub tso suab tso tawm. Matrix switching tso cai rau ib qho / lossis tag nrho cov tswv yim muab rau ib qho / lossis tag nrho cov khoom tawm. ACS 4.4 G2 tuaj yeem tswj hwm los ntawm nws lub vaj huam sib luag pem hauv ntej teb encoder tswj pob qhov rooj thiab TAKE hloov, tiv tauj kaw, qhib cov khoom sau, logic thiab / lossis ntau qhov chaw nres nkoj RS-232 (USB lossis Ethernet yeem). Kev txhim kho yog yooj yim nrog RJ45 lub suab jacks rau cov tswv yim thiab cov khoom sib txuas thiab plug-in euroblock ntsia hlau davhlau ya nyob twg txuas rau kev nthuav dav thiab cov chaw taws teeb tswj.

Nta

• 4 × 4 sib npaug analog stereo matrix audio switcher.
• Pem hauv ntej vaj huam sib luag teb encoder tswj pob qhov rooj thiab cais "TAKE" laub khawm yog muab rau cov tswv yim rau tso zis xaiv channel.
• 16 input "PIP" (GPI / Triggers) chaw nres nkoj (lossis chaw taws teeb tswj) nrog rau pem hauv ntej vaj huam sib luag LED taw qhia.
• Multi-poob RS-232 serial chaw nres nkoj (USB thiab / lossis Ethernet yeem) thiab ASCII hais kom ua rau lub computer / automation tswj.
• Peb lub suab hloov pauv: Sib cuam tshuam, sib tshooj, thiab sib tov.
• Internal silence sensors saib xyuas txhua qhov tso zis thiab muab pem hauv ntej vaj huam sib luag LED silence indicators, thiab silence tswb qhib collector outputs.
  Kev mus ncig qib, silence ncua sijhawm thiab rov ua lub sijhawm ncua sijhawm yog cov neeg siv tau teeb tsa.
• Pem hauv ntej vaj huam sib luag tso suab LED VU meters. (Tau tawm ib qho nkaus xwb)
• Stereo headphone tso zis nrog pem hauv ntej vaj huam sib luag headphone jack thiab qib tswj. (Tshaj tawm ib qho nkaus xwb)
• Configurable power-up xaiv ntawm inputs rau outputs, mute los yog xeem qhov chaw xaiv. • Plaub qhib cov khoom tso tawm ua haujlwm raws li xwm txheej tally lossis tswj tau ntawm cov lus txib tawg serial.
• Ob lub SPDT relay outputs nrog xaiv muaj nuj nqi.
• Pem hauv ntej vaj huam sib luag multi-tig input theem trimmers thiab sab hauv ib zaug tig tso zis theem tswj.
• Electronically balanced stereo inputs thiab outputs nrog suab nrov, tsis tshua muaj distortion circuitry.
• Feem ntau cov kev xaiv configuration yog los ntawm lub internal dipswitches.
• Ntau chav nyob yuav raug cascaded kom nthuav tawm suab inputs.
• RJ45 audio jacks rau audio I / O thiab plug-in euroblock ntsia hlau terminals rau lub suab pansion thiab cov chaw taws teeb tswj kev sib txuas.
• Tag nrho RFI pov thawj.
• Xws li PS-1515 +/-15VDC universal desktop fais fab mov (100-240VAC, 46-63 Hz input) nrog IEC AC inlet.
• Txog li ob chav nyob yuav raug muab tso rau ntawm qhov xaiv RA-1 khib txee. Desktop thiab phab ntsa mounting kuj ua tau.

Daim ntawv thov
Tshaj tawm automation audio switcher nrog cov khoom siv nkag, studio qhov chaw xaiv, tus IP codec qhov chaw xaiv, thiab qhov chaw xa xov (STL) qhov chaw xaiv.

CEEB TOOM!
Kev teeb tsa ntawm ACS 4.4 G2 nyob rau hauv qhov chaw siab RF yuav tsum tau ua nrog kev saib xyuas. Shielded cable yog pom zoo rau tag nrho cov tswj, suab inputs thiab outputs. Tag nrho cov ntaub thaiv npog yuav tsum tau khi rau "GND" davhlau ya nyob twg ntawm txhua qhov channel. Lub chaw nres tsheb hauv av yuav tsum tau txuas nrog lub chassis av ntsia hlau (GND) nyob rau sab xis ntawm lub chassis raws li viewed los ntawm qab. Rau cov cuab yeej tiv thaiv xob laim, mus saib www.polyphaser.com thiab www.itwlinx.com. Nws raug nquahu kom tag nrho cov cables txuas nrog ACS 4.4 G2 yuav tsum tau khi los ntawm ferrite cores txhawm rau txhawm rau RF. Kev tiv thaiv kev tiv thaiv nrog RF lim xws li Tripp Lite "ISOBAR 4" kuj tau qhia rau lub hwj chim.

Pem hauv ntej vaj huam sib luag

ACS 4.4 G2 siv 1/2-rack aluminium enclosure (8.50 "x 7.10" x 1.576" (WDH). LED VU meter, ¼ "T / R / S lub tso suab lub mloog pob ntseg thiab lub mloog pob ntseg qib tswj.
Lub switcher tuaj yeem teeb tsa rau cov suab hloov pauv hauv qab no ntawm dipswitch: Overlap (default): Overlaps qhov xaiv (thawj) suab tawm tswv yim nrog lub suab los ntawm lub suab tawm tswv yim tshiab thaum lub pob rau qhov chaw tshiab yog tuav cia. Ob lub channel yuav raug pub rau cov zis kom txog thaum lub pob rau lub suab tawm tswv yim tshiab tso tawm, thaum lub sijhawm thawj lub suab yuav raug hloov mus.
Interlock: Txuas ib qho kev tawm tswv yim rau ib qho kev tso zis, xaiv lwm qhov kev tawm tswv yim disconnects tag nrho lwm cov khoom siv los ntawm cov zis ntawd.
Kev sib xyaw: Ntau qhov kev tawm tswv yim yuav raug xa mus rau qhov tso zis - Nias lub khawm coj ib zaug los txuas, kom tsis txhob nias lub khawm coj dua.

Pem hauv ntej vaj huam sib luag LEDs

Pem hauv ntej vaj huam sib luag ua haujlwm

Lub Vaj Huam Sib Luag
ACS 4.4 G2's rear vaj huam sib luag hosts lub suab thiab tej thaj chaw deb tswj connectors, chassis av davhlau ya nyob twg, multi-poob RS-232 modular connector, thiab 3-pin universal fais fab mov connector. Kev txhim kho yog yooj yim nrog RJ45 jacks rau kev sib npaug audio I / O thiab plug-in euroblock ntsia hlau terminals rau lub suab nthuav dav thiab cov chaw taws teeb tswj.
RS-232 Serial Chaw nres nkoj (RJ-11 Jack)
Qhov RJ-11 jack no yog siv los txuas ACS 4.4 G2 mus rau lub khoos phis tawj COM chaw nres nkoj rau RS-232 serial kev ua haujlwm siv cov khoom siv rov qab hloov pauv nrog 9-pin "S9" poj niam D-sub adapter. Yog hais tias koj lub PC tsis muaj ib tug built-in RS-232 serial chaw nres nkoj tab sis tsis muaj USB, ces ib tug USB-rau-serial adapter cable yog ib txoj hauv kev zoo los ntxiv USB serial muaj peev xwm.
Peb pom zoo kom USB-rau-serial adapter cables uas siv FTDI chipset thiab tau txais txiaj ntsig zoo nrog tus qauv "SBT-FTDI" los ntawm Sabrent.

Cov tswv yim suab
Txhua ntawm plaub lub tso suab tso suab yog sib npaug bridging (20K) ntawm cov kab nominal theem ntawm +4dBu. Kev sib txuas ntawm cov tswv yim yuav tsum tau ua rau + thiab - cov tswv yim pins rau kev ua haujlwm sib npaug, lossis rau + cov tswv yim pins thiab grounding - sab rau kev ua haujlwm tsis sib npaug.
Pem hauv ntej vaj huam sib luag multi-tig theem trimmers yog muab rau kev kho ntawm txhua input channel.

Suab Tso Tawm

ACS 4.4 G2 muab plaub qhov sib npaug qis impedance tso suab tso tawm. Kev sib txuas cov zis yuav tsum tau ua rau + thiab - cov zis rau kev ua haujlwm sib npaug, lossis rau + cov zis thiab hauv av rau kev ua haujlwm tsis sib npaug.
Cov theem tso zis tuaj yeem hloov kho nrog lub hauv ib leeg-tig trimmers. CEEB TOOM: Tsis muaj teeb meem yuav tsum yog lub + lossis - OUTPUTS txuas rau hauv av.
Txuas lub Suab Inputs thiab Outputs Cov input channel yog suav los ntawm 1 txog 4 ntawm lub vaj huam sib luag tom qab.
ACS 4.4 G2 cuam tshuam rau cov khoom siv suab sab nraud los ntawm RJ45 jacks siv tus qauv suab pinout. Ua raws li RJ45 cov lus sib txuas hauv qab no rau qhov xav tau lub suab tawm tswv yim thiab cov khoom sib txuas, uas tshwm nyob rau tom qab ntawm chav tsev.

RJ45 Audio Input Jacks (J5)	RJ45 Audio Output Jacks (J7)

RJ45 Audio Jack Pinout:
Cov tswv yim thiab tso zis RJ45 jacks ua raws li RJ45 cov qauv xaim suab. Thov siv shielded twisted khub Cat5e los yog Cat6 cables thiab connectors (STP).

CEEB TOOM!
Kev teeb tsa ntawm ACS 4.4 G2 nyob rau hauv qhov chaw siab RF yuav tsum tau ua nrog kev saib xyuas. Qhov chaw nres tsheb hauv av yuav tsum tau txuas nrog lub chaw nres tsheb "Chs Gnd" hauv av.

Kev teeb tsa

Kev Npaj Cable
Cov terminals thaiv cov connectors siv rau input channel expansion thiab tej thaj chaw deb tswj kev sib txuas ua kom haum cov hlau loj ntawm 16 - 28 AWG, khoom los yog stranded. Ua ntej txhim kho ib lub xaim, tshem tawm cov euro-block ntsia hlau davhlau ya nyob twg ntsaws thiab tig txhua lub davhlau ya nyob twg ntes ntsia hlau tag nrho counterclockwise. Tshem tawm txhua tus neeg xyuas pib mus rau qhov ntev ntawm 0.25 "thiab ntxig tus neeg xyuas pib rau hauv lub davhlau ya nyob twg. Tig lub capture ntsia hlau tag nrho clockwise kom ruaj tus neeg xyuas pib. Xyuas kom tseeb tias tsis muaj cov kab liab liab/stray los raug.

Input Channel Expansion
Kev nthuav tawm tswv yim tuaj yeem ua tiav los ntawm kev siv ob lub ACS 4.4 G2 switchers thiab txuas ib lub shielded cable ntawm thawj ACS 4.4 G2's EXT1L unbalanced input davhlau ya nyob twg thiab cov khoom siv thib ob.
Cov ntaub thaiv npog yuav tsum tau txuas nrog hauv av davhlau ya nyob twg. Ua raws li cov txheej txheem tib yam rau EXT1R channel. Qhov saum toj no example muab 8 inputs, nrog rau thawj switcher muab lub ntsiab tso zis.

(Sab saum toj kab, TB-1)

(Cov kab hauv qab, TB-1)

Audio Input thiab Output Level Adjustment
Thaum cov kev tawm tswv yim thiab cov khoom sib txuas tau ua tiav, cov theem nkag tuaj yeem hloov kho. Lub switcher yog lub Hoobkas teeb tsa rau kev sib sau ua ke kom ib txwm tsis muaj kev hloov kho ntxiv. Pom zoo qhov nruab nrab cov tswv yim yuav nyob hauv thaj tsam ntawm 0 dBu txog +8 dBu. Yog tias cov tswv yim yuav tsum tau hloov pauv, cov trimmers tuaj yeem siv tau los ntawm lub vaj huam sib luag pem hauv ntej. Txhua lub tso suab tso suab yog sau npe thiab muaj ob lub trimmers, ib qho rau sab laug channel ib qho rau txoj cai channel.
Calibrating suab theem ntawm lub switcher:

1. Tshem tawm lub hwj chim ntawm chav tsev thiab tshem tawm lub rooj tsav xwm Circuit Court ntawm lub chassis los ntawm unscrewing plaub lub rear vaj huam sib luag ntsia hlau thiab zawv zawg lub rear vaj huam sib luag thiab Circuit Court board tawm sab nraum lub chassis.
2. Pub ib lub teeb liab siv rau hauv cov tswv yim channel 1. A 2 kHz sine wave test tone ntawm +4 dBu yog siv ntawm lub Hoobkas. Txuas lub Hi-Z dB meter mus rau TEST jack JP2.
3. Rov siv zog dua. Kho sab laug thiab sab xis input 1 trimmers mus rau qib xoom ntawm koj lub ntsuas dB.
4. Txiav lub dB meter los ntawm JP2 thiab txuas lub tso suab tso suab tso suab dB meter rau cov zis. Kho qhov tso zis trimmer R68 (Tsawg 1 Sab laug) thiab R83 (Xaiv 1 Txoj Cai) rau qhov xav tau qib. +4 dBu yog teem rau ntawm lub hoobkas. Xyuas kom tseeb tias cov tswv yim 1 rau cov zis 1 raug xaiv siv cov kev tswj hwm pem hauv ntej. Rov ua cov kauj ruam no rau cov zis 2 (R97, R112), Cov zis 3 (R128, R141), thiab Cov Lus Qhia 4 (R156, R170).
5. Thaum cov tswv yim 1 thiab plaub qhov tso tawm tau raug ntsuas tas li ntawm cov khoom siv tawm tuaj yeem ntsuas tau los ntawm kev coj lawv mus rau qhov tso zis 1 thiab kho cov tswv yim qib trimmers.

PIP/Trigger Inputs

16 "PIP" (GPI/Trigger) inputs yog siv los saib xyuas kev tiv thaiv sab nraud thiab xa cov ntaub ntawv rov qab mus rau lub computer tswj / automation. Lub sij hawm teb yog teem rau 50ms yam tsawg kawg nkaus los ntawm lub neej ntawd tab sis tej zaum yuav raug teeb tsa los ntawm 40ms mus rau 2.54 vib nas this.
Cov inputs yog rub siab mus rau 5 volts los ntawm sab hauv 22KΩ resistors thiab qhib los ntawm rub lub input qis, mus rau hauv av. Cov khoom siv no muab cov xwm txheej rau cov khoom siv pov npav xaiv tsa (thaum lub tsev ID tau teeb tsa rau 0 (ZERO), tsis tas yuav muaj kev pov npav ntawm cov khoom nkag. Kev xaiv tsa yuav tsum yog yog tias chav tsev ID tau teeb tsa saum xoom). 

Silence Sensors
Txhua qhov ntawm plaub qhov tso tawm ntawm ACS 4.4 G2 raug saib xyuas los ntawm qhov ntsiag to sensor.
Lub Hoobkas pib lub tswb qeeb yog teem rau ntawm 10 vib nas this, nrog rau qhov pib ntawm -25 dB, thaum lub sij hawm rov qab yog teem rau ob vib nas this. Thaum nrhiav tau qhov ntsiag to qeeb, qhov tsim nyog "SS" coj yuav teeb pom kev thiab qhov sib thooj (SSx) qhib cov khoom siv yuav ua rau qis qis rau lub sijhawm ntawm kev ntsiag to. Lub sensor yuav programmed rau:

• Tus naj npawb ntawm cov vib nas this ntawm qhov ntsiag to (ntev) uas yuav tsum muaj ua ntej lub tswb nrov tau mus txog lossis raug kaw.
• Tus naj npawb ntawm cov vib nas this uas siv tau lub suab (restore) yuav tsum muaj ua ntej lub tswb ceeb toom raug tshem tawm.
• Tswb pib ntawm: -20, -25, -30, -35, los yog tawm (disabled).

Cov xwm txheej Qhib Tus Sau thiab Silence Sense Qhib Tus Sau Cov Ntawv Sau
ACS 4.4 G2 muaj plaub qhov qhib cov ntaub ntawv sau tawm cov ntawv sau npe, OC1, OC2, OC3, thiab OC4 feem. Cov xwm txheej qhib collector (OCx) tso zis rau cov channel xaiv yuav mus qis muab rov qab (hauv av) rau qhov taw qhia LED,
TTL/CMOS logic, los yog relay. Sab nraud rub-up resistors yuav tsum tau nyob rau hauv qee qhov kev teeb tsa, voltages yuav tsum tau txwv rau 6 VDC ntawm 100 mA qhov siab tshaj plaws.
Ntxiv nrog rau cov xwm txheej qhib cov khoom tso tawm, plaub lub suab ntsiag to lub tswb qhib cov khoom tso tawm kuj tseem muaj npe SS1, SS2, SS3, thiab SS4 feem.
Thaum lub tso zis tso zis tso zis sensor yog enabled, qhib lub collector yuav mus qis thaum silence raug kuaj pom thiab nyob qis kom txog thaum lub suab rov qab mus rau qhov tso zis. Sab nraud rub-up resistors yuav tsum tau nyob rau hauv qee qhov kev teeb tsa, voltages yuav tsum tau txwv rau 6 VDC ntawm 100 mA qhov siab tshaj plaws.
Qhov qhib cov khoom tso tawm yog nyob rau ntawm tus pins 1-8 ntawm hauv qab TB-2 davhlau ya nyob twg thaiv txuas. 

Relay Tso Tawm
ACS 4.4 G2 ob lub SPDT relay outputs tuaj yeem siv los tswj cov khoom siv sab nraud siv kev sib cuag kaw. Cov relays yog tswj los ntawm serial commands. Txhua relay tuaj yeem raug txib los ntawm serial hais kom ua: pulse, latch on, lossis latch off. Cov kev sib txuas relay yog nyob ntawm tus pins 9-16 ntawm hauv qab TB-2 lub davhlau ya nyob twg thaiv txuas.

(Cov kab hauv qab, TB-2)

Teem Configuration Dip-switches
ACS 4.4 G2 yog nruab nrog 8-txoj hauj lwm configuration dipswitch sau npe SW2. Lub dipswitch qhia txog 2-ntsis chav tsev ID, serial baud tus nqi, hom suab (sib tov, sib cuam tshuam, sib tshooj), thiab lwm yam nta tau teev tseg hauv qab no. Chav tsev yuav tsum raug tshem tawm ntawm rooj plaub kom nkag mus rau Dipswitches. Tshem tawm lub hwj chim thiab ib qho cables los ntawm chav tsev. Siv Philips ntswj ntsia hlau los tshem cov ntsia hlau tuav lub vaj huam sib luag tom qab, nrog rau cov ntsia hlau hauv av. Xaub lub Circuit Court board los ua ke tawm tom qab ntawm lub chassis. Nyob rau hauv lub dipswitch sau npe SW2. Teem lub Dipswitches rau qhov xav tau kev teeb tsa hauv qab no. Thaum ua tiav, ua tib zoo xaub lub voj voog rov qab rau hauv lub chassis, rov nruab lub vaj huam sib luag tom qab nrog plaub lub vaj huam sib luag. Ua raws li cov lus piav qhia hauv qab no.

Txuas lub RS-232 Serial Chaw nres nkoj

Lub multi-poob RS-232 transceiver ib txwm hloov ntawm kis thiab txais hom, tshwj tsis yog lub tsev ID yog xoom. Nyob rau hauv tas li ntawd, chav tsev yuav ib txwm tso lub RS-232 transceiver enabled. Siv qhov muab modular (S9) 9-pin D-sub connector adapter thiab thim rov qab modular qaum los txuas rau ACS 4.4 G2's serial connector rau koj qhov chaw nres nkoj serial.  

ACS 4.4 G2 yog muab nrog tus qauv rov qab hloov pauv (RJ11 6p4c) xov tooj lub suab cable thiab Tshaj Tawm Cov Cuab Yeej S9, 9-pin poj niam D-sub modular adapter rau kev tswj xyuas serial. Tsuas yog siv cov hlua modular uas tau muab nrog ACS 4.4 G2 lossis hloov pauv uas thim rov qab (X-dhau). Txuas lub cable ntawm ACS 4.4 G2 thiab koj lub computer COM chaw nres nkoj lossis USB adapter cable (yeem). ACS 4.4 G2 tuaj yeem raug tswj hwm ntawm baud tus nqi ntawm 9600 lossis 38400 baud. Chav tsev raug xa mus rau 9600 baud, nrog 8 cov ntaub ntawv khoom, tsis muaj qhov sib luag thiab ib qho nres me ntsis. Siv lub davhlau ya nyob twg zoo li PuTTY, Tera Term, lossis HyperTerminal siv raws tu qauv ntawm 9600-N-8-1. Teem lub hom rau: DIRECT, Flow Control rau: TSIS MUAJ thiab emulation rau: ANSI. PuTTY thiab HyperTerminal teeb tsa cov lus qhia muaj nyob ntawm peb web site nyob rau hauv "Downloads".

Txuas Ntau ACS 4.4 G2's mus rau Ib Qhov Chaw Nres Nkoj
Ntau ACS 4.4 G2 switchers tej zaum yuav cascaded serially ua hauj lwm los ntawm tib serial chaw nres nkoj. Thawj kauj ruam yog muab cov IDs rau txhua ACS 4.4 G2. Rau example: koj tuaj yeem muab chav ID 1 rau thawj tus hloov pauv thiab chav ID 2 rau tus hloov thib ob. Koj yuav tsum ua tib zoo sib xws cov chaw nres nkoj ntawm ACS 4.4 G2's, ua qhov no ntsaws cov txiv neej kawg ntawm lub duplex modular adapter (Allen-Tel AT202-6) rau hauv cov poj niam muab (S9) DB-9 rau RJ-11 adapter, tom qab ntawd txuas cov khoom siv modular kab cords rau hauv txhua lub duplex modular adapter receptacles thiab lwm qhov xaus rau hauv txhua ACS 4.4 G2 modular receptacles. Saib daim duab hauv qab no. CEEB TOOM: Txog li plaub ACS 4.4 G2's tej zaum yuav daisy chained los ntawm kev siv cov lus piav qhia saum toj no thiab ib qho Allen-Tel AT150, 5-jack modular adapter.

Serial tawg hom Commands
Hom tawg tso cai rau lub computer lossis ASCII davhlau ya nyob twg los tswj thiab nug lub tsev. Tshooj lus no txhais tag nrho cov lus txib uas tau txais los ntawm ACS 4.4 G2. Txhua qhov tawg hom lus txib pib nrog lub hnub qub (*) ua raws li ib tus lej lej uas sib haum rau chav tsev (ID) chaw nyob 0-3 thiab ib lossis ntau tus cim ASCII qhia cov lus txib. Tsis muaj carriage-return los yog linefeed yuav tsum tau txiav tawm cov lus txib tshwj tsis yog rau cov lus txib ntawm ob peb lub sijhawm sib txawv yog tias qhov ntev tshaj plaws tsis xa. Yog hais tias cov lus txib thov teb, cov lus teb yuav suav nrog cov ntawv loj "S", ua raws li qhov chaw nyob, thiab tom qab ntawd cov lus teb tshwj xeeb. Yog tias kev lees paub tau qhib, cov lus txib ua tiav tau teb nrog "RRR" thaum ua yuam kev tau txais "EEE" cov lus teb. Cov syntax ntawm txhua qhov hais kom ua yog muab hauv qab no. Cov syntax qhia tau hais tias cov lus txib raws nraim li nws yuav tsum raug xa mus, tshwj tsis yog tias cov ntawv me me sawv cev rau qhov tseem ceeb uas yuav tsum tau hloov pauv.

Glossary Of Command Notation

Teeb tsa Commands

* 0MM - Qhib cov ntawv qhia zaub mov. Unit ID 0 xwb.
*uCEx - Pab kom yuam kev thiab cov lus teb zoo - Qhov twg x = Y los pab thiab N = lov tes taw.
Hauv hom no, thaum xa cov lus txib uas yuam kev, chav tsev yuav teb (tej zaum ua ntej tau txais tag nrho cov lus txib) nrog "EEE." Yog tias cov lus txib raug xa mus lawm, chav tsev yuav teb nrog "RRR."
* uCDEF – Teem lub Hoobkas ua ntej.
* ua
- Teem "PIP" Programmable Pulse Stretcher Input Duration = ttt: 000
-> 255 pua ntawm vib nas this (255 = 2.55 Seconds)
* uCLx - Xauv Lub Vaj Huam Sib Luag yog tias x yog "L". Xauv Pem Hauv Ntej Vaj Huam Sib Luag yog x yog "U"
* uCPR- Fais fab lub xeev lub suab: Rov qab suab los ntawm lub zog nce lub xeev
* uCPS - Fais fab lub xeev lub suab: Txuag lub zog lub xeev
*uCRtt- Teeb Relay Momentary Pulse Length - tt: 00-99 rau 00 -> 9.9 Seconds Silence Sensor Teeb Cov Lus txib
* uCSAtttt - Teem lub sijhawm ntsiag to sensor ncua sijhawm rau tttt vib nas this (0002 - 9999), 0000 = OFF
*uCSBtttt - Teem lub suab ntsiag to rov qab ncua sijhawm rau tttt vib nas this (0002 - 9999), 0000 = OFF

Relay thiab Qhib Cov Lus Cog Tseg
* uORrF - Unlatch tso zis relay "r"
* uORrL - Latch tso zis relay "r"
* uORrP - Pulse tso zis relay "r"
* uOOoF - Unlatch qhib collector "o" (Tsuas yog ua haujlwm hauv NON-Chaw taws teeb hom)
*uOOoL - Latch qhib collector "o" (Tsuas yog ua haujlwm hauv NON-Chaw Taws Teeb)
*uOOoP - Pulse qhib collector "o" (Tsuas yog ua haujlwm hauv NON-Chaw Taws Teeb Hom)
Audio Switch Control Commands
*uiio - Siv cov tswv yim "ii" los tso tawm "o"
*uiiA - Siv cov tswv yim "ii" rau ALL outputs
*uiiEott – Pib sib tshooj – Thov cov tswv yim ii rau cov zis o. Tom qab tt kaum ntawm ib ob,
tshem tag nrho lwm yam inputs los ntawm cov zis o.
CEEB TOOM: Tsuas yog ib qho ntawm ib lub sij hawm tuaj yeem tos rau ib qhov tso zis. Max lub sijhawm 9.9 vib nas this
*uE - Xaus sib tshooj yog nyob rau hauv hom sib tshooj. Qhov no siv tau rau tag nrho cov txiaj ntsig uas tau hloov pauv txij li qhov kawg "kawg sib tshooj" cov lus txib raug muab tawm.
*uiiMA – Mute input “ii” rau tag nrho cov zis
*uiiMo – Mute input “ii” rau cov zis “o”
* uMo - Mute tso zis "o"
* uMA - Mute tag nrho cov zis
*uB,a,a,a,a, teeb tsa tag nrho cov xwm txheej tsis quav ntsej hom: qis dua 4 ntsis ntawm A yog channel # OR'd ua ke + 1, sab sauv 4 khoom yog 41. CEEB TOOM: Cov lus qhia nkag yuav tsum nyob hauv CAPS.
A = tag nrho tawm
IB = 1
C = 2
D = 1 + 2
E = 3
F = 3 + 1
G = 3 + 2
H = 3 + 2 + 1
kuv = 4
Tshwj xeeb MIX hom commands (tus switcher tsis tas yuav tsum nyob rau hauv MIX hom).
*uiiO1 Rau cov tswv yim ii, teeb tsa cov zis 1 rau yam tsis muaj kev cuam tshuam lwm yam
*uiiO2 Rau cov tswv yim ii, teeb tsa cov zis 2 rau yam tsis muaj kev cuam tshuam lwm yam
*uiiO3 Rau cov tswv yim ii, teeb tsa cov zis 3 rau yam tsis muaj kev cuam tshuam lwm yam
*uiiO4 Rau cov tswv yim ii, teeb tsa cov zis 4 rau yam tsis muaj kev cuam tshuam lwm yam
*uiiO5 Rau input ii, tso zis 1 tawm yam tsis muaj kev cuam tshuam lwm yam
*uiiO6 Rau input ii, tso zis 2 tawm yam tsis muaj kev cuam tshuam lwm yam
*uiiO7 Rau input ii, tso zis 3 tawm yam tsis muaj kev cuam tshuam lwm yam
*uiiO8 Rau input ii, tso zis 4 tawm yam tsis muaj kev cuam tshuam lwm yam

Cov ntaub ntawv rov qab cov lus txib
*POLL - Teb nrog chav tsev (ID) chaw nyob hauv lub sijhawm tsim nyog. Yog tias muaj ntau chav nyob ntawm kab, txhua tus yuav teb nrog qhov ncua sij hawm sib txawv tom qab tau txais cov lus txib no.
*usL – Xa
Audio Status: SuLo,x,x,x,x . "u" yog unit ID, "o" yog cov zis, thiab "x" yog "1" rau txuas; "0" rau tsis txuas rau txhua qhov kev tawm tswv yim.
* uSPii – Xa ib qho kev tawm tswv yim (GPI) PIP xwm txheej. Teb yog
"SuP, ii, x" qhov twg "x" yog 0 yog tias qhov sib txuas lus yog siab, 1 yog qis.
* uSPA - Xa tag nrho cov tswv yim (GPI) PIP xwm txheej. Teb yog:
"SuP, A, x, x, x, x, x, x, x, x, x, x, x, x, x, x qhov twg input 0 yog thawj zaug thiab input 15 yog kawg. "x" yog 0 yog tias qhov sib txuas lus yog siab, 1 yog tias qis.
* uSO - Xa cov xwm txheej ntawm txhua tus Qhib Sau. Teb yog: SuO, x, x, x, x (0 = OFF).
* usR - Xa cov xwm txheej ntawm tag nrho cov relays. Teb yog: SuR, x, x, x, x (0 = OFF).
* uSS - Xa cov xwm txheej ntawm kev ntsiag to sensor: SuS, a a = 0 (tsis ntsiag to), 1 = ntsiag to
*uU – Xa cov ntaub ntawv qhia chaw:ample: ACS4.4_Vx.x
*uY - Cov duab teeb tsa
Real Time Control Commands
* uDxx - Ncua xx vib nas this ua ntej ua cov lus txib tom ntej.
* uDLxxx - Ncua xxx vib nas this ua ntej ua cov lus txib tom ntej.
* uZx - Echo cim "x" rau serial chaw nres nkoj. Qhov no muaj txiaj ntsig zoo hauv kev debugging cov hlua hais kom ua.

Ntawv qhia zaub mov hom
Cov lus txib kom nkag mus rau hom ntawv qhia zaub mov yog: * 0MM. Cov ntawv qhia zaub mov hom qhia txog qee yam tsis zoo thiab tso cai rau kev tswj hwm thiab / lossis kev teeb tsa ntawm feem ntau cov haujlwm hloov pauv.

Broadcast Tools(R) ACS 4.4G2 V0.3 – Ntawv qhia zaub mov

1. Teem PIP Yam tsawg kawg nkaus (0-2.55 sec). - Tam sim no: 1.00 (sec)
2. Teem sijhawm Relay/OC Pulse Tuav Sijhawm (0 - 25.5 sec) - Tam sim no: 1.0
3. Teem Silence Sense Tau Txais Kev ncua (sec). – Tam sim no: 10
4. Teem Silence Sense Restore Delay (sec). – Tam sim no: 5
5. Teem Silence Sense Thresholds - Tam sim no: -25, -25, -25, -25,
6. Xauv / Xauv Pem Hauv Ntej Vaj Huam Sib Luag - Tam sim no: LOCKED

A – Qhib Audio XPOINT
B – Tig OFF Audio XPOINT
C – Txuag Audio Macro
D – Load Audio Macro
E - Txuag Lub Xeev Lub Xeev tam sim no kom muaj zog
F – Qhia qhov teeb meem tam sim no thiab xwm txheej
G – Teem lub Hoobkas Defaults

Audio Status:
1->1 2->2 3->3 4->4
Nkag mus Xaiv, lossis Q kom tawm:

Specifications

Cov theem nkag:	Max + 24 dBu, sib npaug, txuas. 20 kΩ.
Cov qib tso zis:	Plaub lub tso suab sib npaug, +24 dBm. @ 600 Ω. / +26 dbu @ 10K. Lub mloog pob ntseg tso zis, 4.7 Ω. 100 mw.
Qhov system txais:	10 dB max.
Teb zaus: *	20-20 kHz; +/- .0.25dB
Teeb liab / suab nrov piv: *	>-84 dB nominal, hnyav 20 txog 22Khz
Distortion: *	Tsawg dua 0.02% THD @ +26 dBu
Crosstalk: *	-100 dB @ 1khz / -79 dB @ 10 kHz los ntawm cov channel uas nyob ib sab.
Input expansion chaw nres nkoj:	Unbalanced summing inputs @ 10k, 0 dBu.
Hloov txoj kev:	Digitally tswj qib kev tshaj lij analog hloov arrays.
Logic:	Flash microprocessor / Tsis-volatile nco.
Tswj kev ua haujlwm:	Pem hauv ntej Vaj Huam Sib Luag - Momentary keyboards. Cov chaw taws teeb / "PIP" (Tsiv) - Momentary (40ms mus rau 2.54 vib nas this teb lub sijhawm, sib xws nrog CMOS / TTL logic, qhib cov neeg sau lossis tiv tauj kaw rau hauv av.
Status/Control:	Serial - Ntau-nco RS-232, 9600 lossis 38.4K, 8, N, 1. Pem hauv ntej vaj huam sib luag - LED ntsuas. Tswj - 2 - SPDT Relays / Silence Sensor - 4 OC's Chaw taws teeb - 4 - Qhib cov khoom tso tawm (6vdc @ 100ma max.) RS-232 - Multi-poob RS-232, 9600 lossis 38.4K, 8, N, 1.
Interfacing:	Suab & Chaw Taws Teeb Tswj - RJ45 jacks & Plug-in euroblock ntsia hlau terminals. Haum rau 16-28 AWG hlau. Mating connectors muab rau euroblock connectors. RS-232 Serial - RJ-11 / 6P4C thim rov qab modular cable & "S9" poj niam 9-pin D-Sub adapter nkag. USB-RS-232 Adapter cable thiab / lossis Ethernet rau serial interface. xaiv tau.
Lub zog:	PS-1515 / IEC Universal AC (100-240 VAC, 46-63 Hz w / IEC) input, ntau-voltage +/-15vdc) DC hloov fais fab mov. CE. (Supply nrog domestic IEC AC qaum).
Mechanical:	8.50 "x 7.10" x 1.576" (WDH) txhuas extrusion chassis nrog (4) #6-32 ntsia hlau xov mounting qhov rau xaiv RA-1 khib txee
Qhov hnyav:	5 lbs. (unit thiab accessories).

LIMITED Warranty

Lo lus "Buyer" raws li siv hauv daim ntawv no hais txog thiab suav nrog ob qho tib si (tab sis tsuas yog) (a) ib tus neeg lossis lub koomhaum uas tau txais cov khoom no rau lub hom phiaj ntawm kev muag khoom rau lwm tus (piv txwv li, tus neeg muag khoom lossis tus muag khoom ntawm cov khoom), thiab (b) thawj tus neeg lossis lub koomhaum uas tau txais cov khoom zoo li no rau tus neeg ntawd lossis lub koomhaum nws tus kheej siv.
Cov Cuab Yeej Tshaj Tawm tau lees paub rau txhua tus neeg yuav khoom ntawm txhua yam khoom tsim los ntawm Cov Cuab Yeej Tshaj Tawm tias cov khoom yuav tsis muaj qhov tsis xws ntawm cov khoom siv thiab kev ua haujlwm thaum lub sijhawm xa khoom los ntawm Cov Cuab Yeej Tshaj Tawm yog tias cov khoom raug teeb tsa, siv thiab khaws cia.

EXCLUSIVE REMEDIES
Yog tias Cov Cuab Yeej Tshaj Tawm tau ceeb toom, sau ntawv, ntawm qhov ua tsis tiav ntawm ib yam khoom tsim los ntawm Cov Cuab Yeej Tshaj Tawm kom ua raws li cov lus teev tseg cia tsis pub dhau ib (1) xyoo tom qab hnub uas tus neeg yuav khoom tau txais cov khoom, thiab yog tias cov khoom raug xa rov qab mus rau Cov Cuab Yeej Tshaj Tawm raws li Broadcast Tools 'cov lus qhia rau kev pom zoo los ntawm kev tshuaj xyuas qhov tsis xws luag (uas ntawm Broadcast Tools 'kev xaiv tsa yuav suav nrog, tsis muaj kev txwv, ib qho kev xav tau uas tus neeg yuav khoom thawj zaug tau txais daim ntawv tso cai rov qab los ntawm Cov Cuab Yeej Tshaj Tawm, uas Tus Neeg Yuav muab pov thawj ntawm kev yuav khoom hauv daim ntawv xa nyiaj thiab / lossis daim ntawv txais nyiaj, thiab tus neeg yuav khoom them ua ntej tag nrho cov nqi thauj khoom cuam tshuam nrog ib qho kev xa rov qab ntawm cov khoom rau Tshaj Tawm Cov Cuab Yeej siv cov kev pab cuam thauj khoom xws li Broadcast Tools tsim nyog tau teev tseg), Tshaj Tawm Cov Cuab Yeej yuav kho lossis hloov qhov tsis raug. yam khoom, lossis yuav rov qab them tus nqi yuav khoom them los ntawm Tus Neeg Yuav Khoom rau cov khoom. Cov cuab yeej tshaj tawm xov xwm yuav tsum muaj txoj cai tshwj xeeb los xaiv ntawm cov kev hloov pauv no.

Tsis muaj lwm yam kev lav phib xaub lossis kev kho mob
TXOJ HAUJ LWM NTAWM TXOJ HAUJ LWM NTAWM TXOJ HAUJ LWM HAUJ LWM, tshaj tawm cov cuab yeej thiab nws cov neeg muab khoom tsis lees paub tag nrho lwm qhov kev lav phib xaub, EXPRESS OR Implied, suav nrog TABSIS TSIS TXAUS SIAB RAU HAUV PAUB TIAS URPOSE; Thiab cov kev hloov pauv yav dhau los yuav tsum raug zam ntawm txhua yam kev kho mob. TSIS TXAUS SIAB NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ LAWM. KOJ YUAV TSUM TAU TXAIS NTAWM LUB CHAW UA HAUJ LWM NTAWM LUB CHAW UA HAUJ LWM NTAWM LUB CHAW UA HAUJ LWM.
TSIS TXAUS SIAB RAU COV NYIAJ NYIAJ NYIAJ NTAWM TXOJ CAI NTAWM TXOJ CAI NTAWM LUB TSEV KAWM NTAWV, TSIS TXAUS SIAB NTAWM LUB SIJ HAWM NTAWM LUB TSEV KAWM NTAWV YUAV TSUM TAU TXAIS KEV PAB CUAM TSHUAJ TIV THAIV, SIJ HAWM, TSEEM CEEB PUAS YOG (xws li, tsis muaj kev txwv, txhua yam kev puas tsuaj rau cov nyiaj poob haujlwm , Kev lag luam cuam tshuam, kev poob ntawm cov ntaub ntawv lossis cov ntaub ntawv, tus nqi ntawm lub peev, thov cov neeg siv khoom, lossis lwm yam kev poob nyiaj txiag) tshwm sim los ntawm kev siv lossis tsis muaj peev xwm siv txhua yam khoom siv tau txais txiaj ntsig, TAU TXAIS RAU TXOJ CAI NTAWM CHAW UA HAUJ LWM NTAWM LUB SIJ HAWM YUAV TSUM TAU TXAIS KEV PAB CUAM TSHUAJ TIV THAIV, INCIENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES. TXOJ CAI NTAWM LUB SIJ HAWM YUAV TSUM TAU TXAIS KEV PAB CUAM RAU IB TUG IB TUG RUAJ NTSEG NTAWM LUB CAIJ NYOOG LOS NTAWM KEV TSO CAI LOS NTAWM KEV TSO CAI LOS NTAWM KEV TSO CAI LOS NTAWM LUB SIJ HAWM NTAWM LUB TSEV KAWM NTAWV NTAWM LUB TSEV KAWM NTAWV LUB HOM PHIAJ, los yog lwm yam kev thov LUB NEEJ. VIM LI CAS THIAJ LI YUAV TSUM TAU TXAIS LUB SIJ HAWM NTAWM LUB SIJ HAWM TXOJ CAI RAU LUB SIJ HAWM NTAWM LUB SIJ HAWM NTAWM LUB SIJ HAWM NTAWM LUB SIJ HAWM, qhov kev txwv no yuav tsis siv rau koj.

Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284 • USA
360.854.9559 voice • 866.783.1742 fax
support@broadcasttools.com e-mail
www.broadcasttools.com webqhov chaw

Component Layout

Fractionnal Schematic

131 State Street, Sedro-Woolley, WA 98284 • 360.854.9559 • Fax 866.783.1742
Mus ntsib peb hauv online ntawm www.broadcasttools.com
Copyright © 1989-2022 los ntawm Broadcast Tools, Inc. All Rights Reserved.

Cov ntaub ntawv / Cov ntaub ntawv

BROADCAST ACS 4.4 G2 Plaub Input Quad Output Stereo Audio Matrix Switcher [ua pdf] Phau ntawv qhia ACS 4.4 G2 Plaub Input Quad Output Stereo Suab Matrix Switcher, ACS 4.4, G2 Plaub Input Quad Output Stereo Suab Matrix Switcher, Lub Stereo Suab Matrix Switcher, Suab Matrix Switcher, Matrix Switcher, Switcher

Cov ntaub ntawv

• Cov neeg siv phau ntawv