BASTL INSTRUMENTS MIDI LOOPER Clockface Modular

Specifications

• Khoom siv: Midilooper
• Version: 1.1
• Number of Voices: 3
• Txhawb MIDI Cov Lus: Lus Cim, CC, Pitch Khoov, Aftertouch
• Nta: Looping, Transposition, Velocity tswj, Quantization, Shuffle, Humanization, moos synchronization

Taw qhia

Midilooper yog ib lub cuab yeej uas mloog MIDI cov lus (tswj cov ntaub ntawv hais txog kev sau ntawv, kev hloov pauv thiab lwm yam tsis muaj) thiab ua rau lawv zoo ib yam li lub suab looper yuav voj cov suab. Txawm li cas los xij, loops ntawm MIDI cov lus tseem nyob hauv kev tswj hwm, uas txhais tau tias ntau lwm cov txheej txheem tuaj yeem tshwm sim nyob rau saum toj ntawm lawv - kev hloov kho timbre, hloov lub hnab ntawv thiab lwm yam. Txij li thaum looping yog ib txoj hauv kev nrawm tshaj plaws thiab zoo tshaj plaws ntawm kev ua suab paj nruag, peb tau ua cov kev tswj ntawm Midilooper sai sai los txhawb kom tsis muaj kev cuam tshuam. Midilooper tuaj yeem synchronized los ntawm MIDI moos lossis analog moos, lossis nws tseem tuaj yeem khiav ntawm nws tus kheej moos (kais tempo / dawb khiav). Midilooper muaj 3 lub suab uas txhua tus tuaj yeem raug xa mus rau qhov sib txawv MIDI channel, tso cai rau nws tswj thiab voj 3 qhov sib txawv ntawm cov iav. Txhua lub suab tuaj yeem kaw tus kheej, muted, overdubbed, lossis tshem tawm. Midilooper kuj tseem muaj qee qhov kev ua tiav ntawm cov ntaub ntawv kaw tseg: hloov pauv, nrawm nrawm thiab hloov pauv, quantization, shuffle, humanization (random variations of speed), kho qhov ntev ntawm lub voj, los yog ob npaug thiab halving ntawm playback ceev.
Tsis tas li ntawd, nws nta CV thiab ua rau muaj kev nkag mus rau kev sib txuas nrog modular synths: rov pib dua, rov ua dua, tshaj tawm, thiab hloov pauv. Nws tseem tuaj yeem tswj tau los ntawm kev sib txuas ko taw pedals.

MIDI LOOPER V 1.0 CEEB TOOM thiab sau cov lus no:

Nyeem thiab txhais cov lus ntawm lub sijhawm tiag tiag (lawv tsis muaj MIDI CHANNEL)

SETTING
Midilooper mloog tag nrho MIDI Channels thiab xa MIDI cov lus tsuas yog ntawm MIDI channel muab rau lub suab xaiv. Siv cov nyees khawm A, B, C los xaiv lub suab.

INITIAL CONNECTION

1. Txuas cov keyboard lossis tus maub los uas tso tawm MIDI rau MIDI Input ntawm Midilooper.
2. Txuas lub MIDI Tawm ntawm Midilooper rau ib qho synth lossis suab module uas tau txais MIDI.
3. (yeem) Txuas MIDI Tawm 2 ntawm Midilooper mus rau lwm lub synth 4 Txuas USB lub zog rau Midilooper

TSEEM CEEB: YUAV TSUM pom seb koj puas tau txais MIDI INFORMATION LUB SIJ HAWM NTAWM LUB CHAW UA HAUJ LWM yuav blink (Tsuas yog thaum tus neeg ua si raug tso tseg).

SET LUB MIDI CHANNEL

Koj yuav tsum paub
Nyob rau hauv cov khawm ua ke cov nyees khawm ua raws li xub:

• REC = UA
• PLAY/STOP = POB

Lub suab khawm A, B, thiab C xaiv lub suab. Xaiv lub suab A los ntawm nias lub pob thiab teeb tsa nws cov zis MIDI channel los ntawm tuav FN + A + UP / DOWN. Cov zaub yuav qhia tus naj npawb MIDI channel. Teem lub MIDI input channel ntawm koj cov synth rau tib lub channel.
Yog tias ua tiav kom raug, ua si sau ntawv ntawm koj cov keyboard yuav tsum ua cov ntawv no ntawm koj cov synth. Yog tias nws tsis yog, xyuas cov kev sib txuas, lub zog thiab MIDI channel teeb tsa ntawm ob qho tib si Midilooper, thiab koj cov synth. Ua raws li cov txheej txheem rau kev teeb tsa suab B thiab C.
TSEEM CEEB: Ntawm no koj tuaj yeem xav ntxiv STATIC OCTAVE offset rau koj lub suab (Txhua lub suab koj tuaj yeem xav ua si hauv qhov sib txawv OCTAVE).
Txhawm rau ua qhov no, nias FN + TRANSPOSE + VOICE + UP / Down

Tau txais MIDI tswv yim?
MIDI tawm tswv yim tuaj yeem tshwm sim hauv qee cov synths thaum siv MIDI Hauv thiab MIDI Tawm ntawm cov synth. Sim disabling MIDI Thru thiab Local Control ntawm lub synth. Yog tias koj tsis tuaj yeem lossis tsis xav ua qee qhov ntawm no koj tuaj yeem qhib MIDI cov lus tawm tswv yim lim ntawm Midilooper. Thaum xaiv MIDI channel ntawm lub suab uas tawm tswv yim, nias lub pob CLEAR. Qhov no yuav tig rau MIDI FEEDBACK FILTER lossis hauv lwm lo lus: lov tes taw qhov kev ua si nyob ntawm cov channel tshwj xeeb, thiab tsuas yog cov khoom siv looped yuav rov qab. Hloov mus rau lwm qhov MIDI channel yuav rov pib qhov tshwj xeeb no rau nws qhov pib tawm hauv lub xeev.

Txuas thiab xaiv koj lub moos SOURCE

Muaj ntau ntau txoj kev xaiv ntawm clocking lub Midilooper.
Koj tuaj yeem xaiv lub moos los ntawm FN + PLAY / STOP. Kev xaiv lub voj voog nyob rau hauv qhov kev txiav txim hauv qab no:

1. MIDI Clock ntawm MIDI Input (pab xub taw qhia rau MIDI Hauv)
2. Analog moos ntawm Clock Input (REC LED On) *
3. MIDI Clock on Clock Input (REC LED blinking) - koj yuav xav tau MIDI rau mini jack adapter siv qhov kev xaiv no **
4. Coj mus rhaub tempo (Clear LED On) – tempo teem los ntawm FN + CLEAR = TAP
5. Kev khiav dawb (Ntshiab LED ntsais muag) - tsis xav tau lub moos! Lub tempo yog teem los ntawm qhov ntev ntawm cov ntaub ntawv thawj zaug (raws li nrog lub suab loopers)
6. USB Midi - zaub hais tias UB thiab LENGTH Led teeb

* Yog tias koj siv lub moos analog, tej zaum koj yuav xav kho tus DIVIDER.
** Ceev faj tias muaj cov tsis sib xws ntawm tus qauv MIDI connector (5pin DIN) rau 3,5mm (⅛ nti) TRS MIDI jacks adapters ntawm lub khw. Cov kev hloov pauv tau tsim nyob rau lub sijhawm ua ntej kev tsim qauv ntawm minijack MIDI (ib nrab ntawm 2018).

Peb ua raws li tus qauv teev tseg los ntawm ib midi.org.
TSWV YIM: Txhawm rau pom seb koj lub moos puas ua haujlwm, koj tuaj yeem saib xyuas qhov thib ob dot ntawm lub vijtsam thaum tus neeg ua si nres.

Kev sib txuas ntxiv
Metronome Out - headphones metronome tso zis. Pib dua Hauv - ua rau Midilooper mus rau thawj kauj ruam. CVs lossis Pedals - 3 jack inputs uas tuaj yeem siv los ua CV inputs lossis pedal inputs los tswj Midilooper interface. CVs tuaj yeem cuam tshuam ib, ob lossis tag nrho cov suab. Txhawm rau xaiv yog CV ua haujlwm rau lub suab tuav lub suab khawm rau 5 vib nas this thiab tom qab ntawd siv:

• QUANTIZE khawm kom qhib lub RETRIGGER VELOCITY khawm kom qhib VELOCITY CV TRANSPOSE khawm kom nquag TRANSPOSE CV
• Yog tias tsis muaj ib lub suab raug teem kom tau txais CV ntawm lub jack tshwj xeeb, lub jack yuav ua raws li cov lus qhia pedal.
• RETRIGGER cov tswv yim yuav ua raws li RECORD khawm VELOCITY input yuav ua raws li CLEAR khawm TRANSPOSE input yuav voj voog hla lub suab

TSEEM CEEB: Koj tuaj yeem txuas tau txhua yam kev txhawb nqa pedal los tswj lub kaw lus khawm, Ntshiab khawm lossis lub suab xaiv. YUAV UA LI CAS YUAV TSUM siv ADAPTER los ua nws 3.5MM (") es tsis txhob siv tus qauv 6.3MM (¼"). Koj tseem tuaj yeem tsim koj tus kheej PEDAL los ntawm kev tso ib qho kev sib cuag ntawm tus tswv cuab thiab lub tes tsho ntawm lub jack txuas.
Nws tsuas yog paub txog TIP-Sleeve kev sib cuag.

Kev sib txuas ntxiv
Txuas Midilooper rau koj lub computer nrog USB cable thiab nrhiav nws hauv koj cov khoom siv Midi. Nws yog chav kawm raws li USB Midi ntaus ntawv yog li nws yuav tsis xav tau cov tsav tsheb ntawm cov khoos phis tawj feem ntau. Siv USB ua cov tswv yim rau Midilooper rau looping, siv nws los sync lub Midilooper.
Midilooper tseem tsom nws cov zis rau USB kom koj tuaj yeem ua si koj cov software synths.
CEEB TOOM: MIDILOOPER tsis yog USB tus tswv koj tsis tuaj yeem ntsaws rau hauv USB MIDI tswj rau hauv lub MIDILOPER. USB MIDI txhais tau hais tias MIDILOPER yuav tshwm sim raws li MIDI khoom siv hauv koj lub computer.

LOOPING

ROV QAB IB TUG NEEG
Nias lub RECORD khawm kom "caj npab" cov ntaubntawv povthawj siv. Cov ntaubntawv povthawj siv yuav pib nrog thawj qhov tau txais MIDI Note lossis sai li sai tau thaum koj nias lub pob PLAY/STOP.
Txhawm rau ua kom tiav lub voj, nias lub khawm RECORD dua thaum kawg ntawm kab lus. Tam sim no lub LENGTH LED yuav teeb ntsuab los qhia tias koj tau tsim lub voj ntev. Qhov ntev tsim nws tus kheej txiav rau txhua lub suab.
Koj tuaj yeem hloov qhov ntev rau txhua lub suab ntawm tus kheej, lossis siv CLEAR muaj nuj nqi los tsim qhov ntev los ntawm kev kaw tseg (saib ntxiv).

OVERDUB / OVERWRITE
Thaum cov ntaubntawv povthawj thawj zaug tau ua tiav lawm koj tuaj yeem hloov lub suab thiab kaw lub voj rau ib qho cuab yeej sib txawv, lossis koj tuaj yeem ntxiv txheej rau tib lub suab. Kev kaw cia nrog qhov hloov pauv hauv OVERDUB hom yuav ntxiv cov txheej txheem tshiab. Txawm li cas los xij, hauv OVERWRITE hom, cov ntaub ntawv sau tseg thawj zaug yuav raug muab tshem tawm sai li sai tau thaum tsawg kawg yog ib daim ntawv tuav thiab kaw.

LEEJ TWG
Siv lub pob ERASE thaum ua si kom tshem tawm cov ntaub ntawv kaw tsuas yog thaum lub pob ERASE tuav cia. Ua haujlwm rau lub suab xaiv.

THOV KEV PAB CUAM TSHUAJ TSHUAJ TIV THAIV thiab ua ib qho tshiab
Txhawm rau tshem tawm ib lub voj ntawm lub suab xaiv nias lub pob CLEAR ib zaug. Qhov no yuav rho tawm tag nrho cov ntaub ntawv kaw tseg, thaum tseem rov pib dua lub voj ntev. Kev ua haujlwm tshem tawm kuj tseem yuav "caj npab" kaw.
Ob npaug nias lub pob CLEAR kom tshem tawm tag nrho cov suab, rov pib dua lub voj voog ntev, nres tus neeg uas ua ntawv thiab caj npab kaw. Qhov macro no yuav npaj Midilooper rau lub voj tshiab hauv ib qho taw qhia.

LOOPING FLOW CHART

LAUJ
Tuav lub CLEAR khawm thiab nias lub pob lub suab rau MUTE thiab UNMUTE lub suab.

TXOJ CAI TSHIAB
Cov kaw kaw rau tag nrho 3 lub suab yog tus qauv. Txhawm rau hloov ntawm 12 tus qauv sib txawv, tuav lub PLAY khawm thiab nias ib qho ntawm lub suab khawm xaiv ib qho ntawm peb tus qauv. Muaj plaub pawg ntawm peb tus qauv thiab kom nkag mus rau ib pawg qauv sib txawv nias ib qho ntawm plaub lub khawm me me (LENGTH, QUANTIZE, VELOCITY, TRANSPOSE) thaum tseem tuav lub PLAY khawm.

Txuag cov qauv
Txhawm rau txuag txhua tus qauv nias FN + REC. Cov qauv yog khaws cia nrog cov kev teeb tsa no: quantize, shuffle, humanize, velocity, length, stretch. Tag nrho lwm qhov chaw thoob ntiaj teb tau txais kev cawmdim (Clock xaiv, MIDI channels thiab lwm yam)

UNDO
Tuav CLEAR thiab nias REC toggles ntawm UNdo lossis REdo yuam kev yuav tshwm sim thiab yog tias lawv ua muaj ib qho Undo los cawm koj. Undo rolls rov qab qhov kev txiav txim zaum kawg. Yog nws kaw, clearing los yog erasing. REdo yuav thim rov qab qhov kawg UNdo yog li koj tuaj yeem siv cov yam ntxwv no zoo dua. Rau example mus ntxiv ib txheej tshiab overdub tshem nws thiab ntxiv nws dua.

MODIFY LUB ROOJ

LENGTH
Qhov ntev ntawm koj lub voj tuaj yeem hloov pauv tau thoob ntiaj teb: LENGTH + UP / POB lossis ib lub suab: LENGTH + VOICE + UP / DOWN. Cov zaub yuav qhia ntev npaum li cas lub voj yog (hauv cov neeg ntaus). Kho Length yuav hloov nyob rau hauv increments ntawm 4 neeg ntaus 1 bar.
Txhawm rau ua kom tiav qhov nce ntxiv kais thiab Tuav LengHT + UP / DOWN los hloov qhov Length hauv increments ntawm +/- 1.
Kev kaw lub voj thawj zaug yuav ib txwm ntsuas lub voj ntev mus rau ib qho bar (4 neeg ntaus). Sau Looplength yuav ntev dua 256 neeg ntaus. Tsuas yog cov zaub tsis tuaj yeem tso cov lej ntau dua li ntawd. Nias lub LENGTH yam tsis tau pib lub voj tsim
(LENGTH lub teeb tawm) yuav siv sij hawm kawg siv Length thiab teeb nws.

QUANTIZE

• Tus nqi ntawm QUANTIZE tuaj yeem hloov pauv tau thoob ntiaj teb: QUANTIZE + UP / DOWN lossis ib lub suab: QUANTIZE + VOICE + UP / Down.
• Tus naj npawb ntawm cov zaub sawv cev rau hom kab sib chaws uas cov ntaub ntawv kaw tseg yuav raug suav.

VELOCITY

• Ua kom VELOCITY yuav lim qhov nrawm ntawm txhua cov ntawv sau tseg thiab ua rau nws muaj txiaj ntsig zoo li qub.
• Tus nqi ntawm VELOCITY tuaj yeem hloov pauv tau thoob ntiaj teb: VELOCITY + UP / Down, lossis ib lub suab: VELOCITY + VOICE + UP / DOWN.
• Tswv yim: Yog tias koj mus nrog qhov nrawm hauv qab "00" koj yuav tau mus rau "NO" rau "ib txwm" lossis "tsis hloov" ntawm qhov nrawm. Txoj kev no, tsuas yog qee lub suab tuaj yeem cuam tshuam los ntawm VELOCITY.

KEV HLOOV

• Hauv Transpose hom, cov ntaub ntawv kaw tseg tuaj yeem hloov pauv ntawm cov tswv yim nyob ntawm koj cov keyboard. Transpose hom yog nkag los ntawm nias lub pob TRANSPOSE thiab tawm los ntawm nias ib qho ntawm lub suab khawm.
• Txhawm rau xaiv lub suab twg cuam tshuam los ntawm Transpose hom tuav TRANSPOSE thiab nias lub suab khawm kom qhib / deactivate nws cov nyhuv ib lub suab.
• Kev hloov pauv yuav siv tau rau cov ntawv hauv paus. Txhawm rau xaiv cov ntawv hauv paus, tuav lub pob TRANSPOSE thiab ua si MIDI Note ntawm MIDI Input (DOTS yuav teeb rau ntawm cov zaub los qhia tias cov ntawv hauv paus tau teeb tsa lawm).
• Thaum lub hauv paus ntawv tau raug xaiv, nias sau ntawv ntawm cov keyboard yuav transposing cov ntaub ntawv kaw tseg rau cov suab lus xaiv txheeb ze rau lub hauv paus ntawv. Daim ntawv ceeb toom kawg yuav nyob twj ywm.
• Tawm ntawm Transpose hom yuav tshem tawm qhov hloov pauv tab sis cov ntawv hauv paus yuav nco ntsoov.
• CEEB TOOM: FOR TRANSPOSE MODE los ua kom muaj txiaj ntsig tsawg kawg yog ib lub suab yuav tsum tau ACTIVATED thiab daim ntawv sau hauv paus yuav tsum tau xaiv.

HLUB

• Stretch tuaj yeem ua rau lub voj kaw ua si ntawm lub quarter, thib peb, ib nrab, ob npaug, triple lossis plaub npaug ceev.
• Nias: FN + LENGTH + UP / DOWN los hloov qhov stretch.
• Nws tsuas yog siv rau lub suab xaiv thiab nws yuav ua haujlwm thaum lub sijhawm koj tso cov nyees khawm

SHUFFLE

• Shuffle ntxiv ncua sij hawm rau qee qhov 16th sau ntawv kom ua tiav cov nyhuv viav vias. Nias: FN + QUANTIZE + UP / DOWN los kho tus nqi ntawm Shuffle.
• Cov txiaj ntsig zoo ncua txhua qhov thib ob 16th ceeb toom los ntawm qhov teeb tsa percentage kom ua tiav cov nyhuv viav vias.
• Cov txiaj ntsig tsis zoo ntxiv cov nqi sib txawv ntawm lub sijhawm ncua sijhawm rau txhua tus xa MIDI cov lus kom ua tiav tib neeg lub sijhawm xav tau.
• Nws tsuas yog siv rau lub suab xaiv thiab ua tiav tom qab Quantize.

HUMANIZE

• Humanize randomly hloov qhov nrawm ntawm kev ua si MIDI sau ntawv.
• Ua: FN + VELOCITY + UP / DOWN los teeb tsa qhov sib txawv ntawm Humanize. Qhov ntau dua, qhov ntau VELOCITY tau txais kev cuam tshuam random.
• Nws tsuas yog siv rau lub suab xaiv thiab ua tiav tom qab Quantize.

OCTAVE

• Tej zaum koj kuj yuav xav ntxiv qhov zoo li qub octave offset rau koj lub suab. Txhua lub synth tuaj yeem ua si hauv qhov sib txawv octave, lossis koj tuaj yeem xav hloov qhov ua tau zoo.
• Ua: FN + TRANSPOSE + VOICE + UP / Down los hloov Octave offset ib lub suab.

EXTERNAL CONTROL

RETRIGGER
Cov tswv yim Retrigger yuav rov pib lub hnab ntawv los ntawm kev xa Daim Ntawv Ceeb Toom Tawm thiab Ceeb Toom Rau hauv kev ua tiav rau cov ntawv sau tseg thiab luv Note On thiab Note Off rau qhov kawg ntawm cov ntawv sau ua si hauv legato. Qhov no yuav siv tau rau txhua daim ntawv uas tau ua si hauv legato txawm tias tom qab lawv tso tawm. "Ua si hauv legato" txhais tau hais tias tsuav yog koj txuas ntxiv qhov kawg ntawm ib daim ntawv nrog qhov pib ntawm lwm qhov, lossis txog thaum koj tso tag nrho cov ntawv, Midilooper yuav nco ntsoov tag nrho cov ntawv no raws li tau ua hauv legato. Cias muab, yog tias koj ua si thiab tso tawm chord thiab tom qab ntawd siv Retrigger - cov ntawv sau yuav rov ua dua. Lub Retrigger tuaj yeem siv rau ib, ob, lossis txhua lub suab.
Saib Ntxiv Kev Sib Txuas ntawm yuav ua li cas muab CV inputs.

VELOCITY CV
Lub Velocity CV input ntxiv rau Velocity tus nqi ntawm cov nyob ua si, recorder los yog retriggered sau ntawv. Qhov no tuaj yeem siv ua ke nrog Velocity feature lossis tsuas yog ntxiv cov suab rau qee cov ntawv. Velocity CV tuaj yeem siv rau ib, ob, lossis txhua lub suab.
Saib Ntxiv Kev Sib Txuas ntawm yuav ua li cas muab CV inputs.

TXOJ CAI CV
Lub Transpose CV cov tswv yim ntxiv rau cov nqi sau tseg ntawm cov ntaub ntawv kaw. Lub input yog scaled volt ib octave. Qhov no tuaj yeem siv ua ke nrog Transpose lossis Octave feature.
Transpose CV tuaj yeem siv rau ib, ob, lossis txhua lub suab. Saib Ntxiv Kev Sib Txuas ntawm yuav ua li cas muab CV inputs.

RESET
Cov lus qhia pib dua yuav ua rau Midilooper mus rau thawj kauj ruam. Nws yuav tsis ua si kauj ruam, txawm li cas los xij. Tsuas yog lub moos ntawm lub moos xaiv qhov chaw yuav ua si thawj kauj ruam.

DIVIDER
Qhov kev xaiv no tso cai rau koj kom nce / nqis koj cov tswv yim tempo los ntawm analog moos input. Nias FN+ERASE+UP/DOWN kom hloov pauv. Lub moos feem ntau yog txhua daim ntawv thib 16, txawm li cas los xij, nws tuaj yeem nrawm dua li 32nd sau ntawv lossis qeeb dua li 8th lossis 4th sau ntawv. Cov zaub qhia tus lej xaiv. Thaum "01" raug xaiv, tus neeg uas ua ntawv tsuas yog nce qib ib qho analog moos mem tes. Siv qhov kev xaiv no thaum koj ua haujlwm nrog lub moos tsis xwm yeem.

Nco tseg: Lub moos ANALOG yog UPSCALED INTERNALLY UPSCALED rau MIDI CLOCK (24 PPQN = PULSES ib lub quarter NOTE) thiab kev teeb tsa lub DIVIDER yuav ua rau muaj kev cuam tshuam ntxiv rau kev coj tus cwj pwm ntawm QUANTIZE thiab lwm lub sijhawm.
Saib Txuas thiab xaiv koj lub sijhawm moos kom paub ntau ntxiv.

PEDAL CONTROL
Tus neeg siv interface tuaj yeem tswj tau los ntawm ko taw pedals. Saib Ntxiv Kev Sib Txuas ntawm kev siv cov pedals sab nraud.

LOOPING CCs thiab suab khoov thiab tom qab kov

Tswj Hloov thiab Pitch Khoov thiab Aftertouch (channel) cov lus tuaj yeem kaw thiab kaw ib yam. Raws li nrog MIDI Notes, Midilooper yuav mloog cov no ntawm txhua txoj kev thiab xa lawv / ua si rov qab rau ntawm cov channel uas tau muab rau nws cov suab. Hom overdub/overwrite tsis siv rau cov lus no. Thaum thawj CC ntawm qee tus lej tau txais, Midilooper yuav nco ntsoov thaum nws tau tweaked, thiab nws yuav pib sau lub voj rau tus lej CC no. Thaum nws ua tiav lub voj thiab tuaj rau tib txoj hauj lwm hauv lub voj raws li thawj CC ntawm tus lej ntawd, nws yuav tsum tsis txhob kaw lub CC thiab yuav pib ua si ntawm cov nqi kaw. Tom qab ntawd, txhua yam tshiab tuaj txog CC yuav ua raws li thawj CC thiab yuav pib kaw kom txog thaum lub voj voog puv.
Qhov no siv nyob rau tib lub sijhawm rau txhua tus lej CC (tshwj tsis yog cov CC tshwj xeeb: txhawb nqa pedal, tag nrho cov ntawv tawm thiab lwm yam).

• TSWV YIM: PLAY/STOP + CLEAR = CLEAR nkaus xwb CCS rau lub suab xaiv.
• Lub logic ntawm Pitch Khoov thiab Aftertouch kaw yog tib yam li ntawm CCs.

FIRMWARE UPDATE

Lub firmware version tau pom ntawm cov zaub hauv ob lub thav duab hauv qab no thaum koj pib lub cuab yeej. Yog tias pom li F1 thiab tom qab ntawd 0.0 nyeem nws li Firmware 1.0.0 Qhov tseeb firmware tuaj yeem pom ntawm no: https://bastl-instruments.github.io/midilooper/ Txhawm rau hloov kho cov firmware ua raws li cov txheej txheem no:

1. Tuav lub Velocity khawm thaum txuas lub Midilooper rau koj lub computer ntawm USB
2. Cov zaub qhia "UP" raws li cov firmware hloov tshiab hom, thiab MIDILOOPER yuav tshwm sim raws li ib qho DISC sab nraud ntawm koj lub khoos phis tawj (cov khoom siv loj heev)
3. Download tau cov ntaub ntawv firmware tshiab (cov ntaub ntawv npe midilooper_mass_storage.uf2)
4. Luam cov ntaub ntawv no mus rau MIDILOOPER disc ntawm koj lub computer (Velocity LED yuav pib blinking kom paub meej tias ua tiav)
5. Muaj kev nyab xeeb tshem tawm (eject) MIDILOOPER disc los ntawm koj lub computer, tab sis tsis txhob txiav lub USB cable!
6. nias lub Velocity Button los pib lub firmware hloov tshiab (cov LEDs nyob ib ncig ntawm lub Velocity khawm yuav ntsais, thiab lub cuab yeej yuav pib nrog cov tshiab firmware - xyuas cov firmware version ntawm cov zaub thaum pib).

MIDI IMPLE-MENTATION CHART

• TAU
  • Hauv txhua qhov channel: Lus Cim Rau, Ceeb Toom Tawm Pitch Khoov CC (64 = sustain)
  • Channel hom lus: Txhua Tus Sau Ntawv Tawm
  • MIDI Real Time Messages: moos, Pib, Nres, Mus ntxiv
• Kev xa tawm
  • Ntawm cov channel xaiv: Ceeb Toom On, Note Off Pitch Khoov CC
  • MIDI Real Time Messages: Clock, Pib, Nres, Txuas ntxiv
• MIDI THOV
  • MIDI Thru ntawm MIDI Lub Sijhawm Lub Sijhawm Cov Lus - tsuas yog thaum MIDI Clock raug xaiv los ua lub Clock qhov chaw.

SETUP EXAMPLOJ 01
NO CLOCK SOURCE - DAWB RUNNING MODE LOOPING MIDI los ntawm MIDI CONTROLER

SETUP EXAMPLOJ 02
SYNCED NTAWM MIDI CLOCK LOOPING MIDI los ntawm ntau qhov kev sib tw INSTRUMENT Mloog rau METRONOME NTAWM HEADPHONES

SETUP EXAMPLOJ 03
SYNCED RAU DRUM MACHINE VIA MIDI CLOCK (VIA TRS JACK) LOOPING MIDI los ntawm MIDICONTROLER CONTROLING LOOPER nrog FOOTpedals

SETUP EXAMPLOJ 04
SYNCED RAU ANALOG CLOCK los ntawm MODULAR SYNTHESIZER LOOPING MIDI los ntawm KEYBOARD SYNTH tswj los ntawm CVS thiab TRIGGERS los ntawm MODULAR SYNTH

SETUP EXAMPLOJ 05
Synced los ntawm USB MIDI Clock LOOPING MIDI los ntawm lub laptop mloog mus rau METRONOME ntawm lub mloog pob ntseg

Mus rau www.bastl-instruments.com kom paub ntau ntxiv thiab video tutorials.

CEEB TOOM: Phau ntawv no ua raws li qhov kev kawm zoo tshaj plaws. THOV UA TSAUG NTAU NTAU NTAU NTAU NTAU NTAU NTAU LUB MIDILOPER THIAB UA KOJ LUB ROOJ NO.

FAQ's

Midilooper txhawb nqa pes tsawg lub suab?

Midilooper txhawb nqa 3 lub suab uas tuaj yeem raug xa mus rau MIDI sib txawv.

Midilooper puas tuaj yeem synchronize nrog lub moos sab nraud?

Yog lawm, Midilooper tuaj yeem synchronized los ntawm MIDI moos, analog moos, lossis khiav ntawm nws tus kheej moos (kais tempo / dawb khiav).

Dab tsi ntawm MIDI cov lus tuaj yeem ua rau Midilooper paub thiab sau?

Midilooper tuaj yeem paub thiab sau MIDI Note, MIDI CC, MIDI Pitch Khoov, Tshwj xeeb CCs, thiab MIDI Aftertouch cov lus.

Cov ntaub ntawv / Cov ntaub ntawv

BASTL INSTRUMENTS MIDI LOOPER Clockface Modular [ua pdf] Phau ntawv qhia v1.1, MIDI LOOPER Clockface Modular, MIDI LOOPER, Clockface Modular, Modular

Cov ntaub ntawv

• Cov neeg siv phau ntawv