AUDIOMATICA QCBOX MODEL 5 Hloov thiab kuaj lub thawv

QCBOX qauv 5 hloov thiab kuaj lub thawv

• QCBOX Model 5 hloov thiab kuaj lub thawv yog qhov muaj txiaj ntsig zoo hauv kev siv txhua hnub hauv chav kuaj thiab thaum teeb tsa kev teeb tsa tsis siv neeg lossis phau ntawv tswj kom zoo.
• QCBOX Model 5 muaj tus qauv tsim ultraslim, txhim kho cov yam ntxwv zoo li USB txuas rau PC thiab DC ntsuas lub peev xwm nrog kev hwm rau nws cov qauv ua ntej 4, nce lub zog (50W @ 8Ohm) nrog rau kev hwm rau nws cov thawj coj qauv 1, 2 & 3 thiab ntau yam AC (90 ÷ 240V) fais fab mov. Lub hwj chim amplifier tso zis tam sim no txwv nyob rau hauv kev tswj software.
• Nws lub ntsiab tseem ceeb yog qhov muaj peev xwm ntawm kev hloov pauv sab hauv, raws li kev tswj hwm software, uas tso cai rau kev ntsuas ntawm impedance thiab zaus teb ntawm lub suab nrov (lossis DUT) txuas nrog nws cov khoom tso tawm yam tsis hloov lub suab nrov (lossis DUT) thaiv; nws kuj tseem tuaj yeem xaiv ib qho ntawm plaub qhov khoom siv rau kev ntsuas cov lus teb; kev hloov sab hauv yog tswj los ntawm USB chaw nres nkoj ntawm PC. Cov inputs 3 thiab 4 tuaj yeem raug teeb tsa los ntsuas DC voltages nrog ntau yam ± 2.5V thiab ± 5V feem.
• Internal software tswj voltage generator tuaj yeem ua rau DC voltage (± 20V) rau lub amplus voltage tso zis, tso cai rau lub suab nrov loj teeb liab ntsuas ntsuas.
• Lub siab tso zis, ISENSE, tso cai rau kev ntsuas impedance nyob rau hauv tas li voltage hom thiab lub suab coil tam sim no distortion tsom xam. ISENSE DC tam sim no ntsuas nyob rau hauv thaj tsam ± 2.25A.
• Lub tswv yim tshwj xeeb, PEDAL IN, tso cai rau sab nraud ko taw pedal hloov lossis TTL teeb liab txuas thiab ua rau QC ua haujlwm.
• Lub DB25 connector ntawm lub vaj huam sib luag nram qab muaj 5 digital IN thiab 6 digital OUT.

TECHNICAL SPECIFICATIONS

• Cov tswv yim: Plaub kab / microphone inputs nrog xaiv phantom fais fab mov (0 ÷ 24V software tswj)
• TTL pedal tswv yim (RCA connector)
• Digital I/O: 5 digital inputs (DB25 connector) 6 digital outputs (DB25 connector)
• Lub zog tso zis stage: 50W (8Ohm) lub zog amplifier (26dB nce) nrog kev ntsuas tam sim no thiab software tswj tam sim no limiter
• Lub peev xwm ntawm superimposing DC voltage (± 20V)
• THD (@1 kHz): 0.004%
• Muaj nuj nqi: USB-tswj sab hauv keyboards rau kev ntsuas impedance
• DC tam sim no ntsuas ± 2.25A
• DC IN ntsuas (IN 3 ntau ± 2.5V, IN 4 ntau ± 5V)
• Qhov Loj: 23 (w) x 23 (d) x 4 (h) cm
• Qhov hnyav: 1.4kg ib
• Fais fab mov: 150W 90 ÷ 240VAC

GENERAL CONDITIONS THIAB WARRANTY

• Ua tsaug
• Ua tsaug rau kev yuav koj QCBox Model 5. Peb cia siab tias koj qhov kev paub siv QCBox Model 5 yuav ua tau zoo thiab txaus siab.

KEV PAB CUAM

• Audiomatica tau cog lus los txhawb kev siv QCBox Model 5, thiab rau qhov kawg, muab kev txhawb nqa ncaj qha rau cov neeg siv kawg. Peb cov neeg siv thoob plaws ntiaj teb tuaj yeem tiv tauj peb ncaj qha txog cov teeb meem kev lag luam, cov ntaub ntawv kab mob, lossis cov lus qhia rau kev txhim kho software yav tom ntej. Koj tuaj yeem hu, fax lossis sau rau peb ntawm:
• AUDIOMATICA SRL
• VIA MANFREDI 12
• 50136 FLORENCE, Ltalis
• Xov tooj: +39-055-6599036
• Tus Fax: + 39-055-6503772
• AUDIOMATICA ON-LINE
• Rau ib qho kev nug thiab kom paub cov xov xwm tshiab kawg ntawm QCBox Model 5 thiab lwm yam khoom Audiomatica peb nyob hauv Is Taws Nem los pab koj:
• AUDIOMATICA webqhov chaw: www.audiomatica.com
• E-MAIL: info@audiomatica.com

AUDIOMATICA'S WARRANTY

• Audiomatica lav QCBox Model 5 tiv thaiv lub cev tsis xws luag rau ib lub sijhawm ntawm ib xyoos tom qab thawj tus neeg muag khoom muag ntawm cov khoom no. Hauv qhov ua piv txwv, thov hu rau koj tus neeg muag khoom hauv zos yog tias xav tau kev pabcuam. Koj tuaj yeem tiv tauj peb ncaj qha raws li tau teev tseg saum toj no, lossis xa mus rau lwm tus neeg ua haujlwm tsim nyog.

WARNINGS THIAB LIMITATION OF LIABILITY

• Audiomatica yuav tsis lav ris rau kev puas tsuaj lossis kev raug mob vim yog kev pabcuam neeg siv lossis kev siv tsis raug ntawm peb cov khoom. Audiomatica yuav tsis txuas ntxiv kev tiv thaiv rau kev puas tsuaj ntawm QCBox Model 5 los ntawm kev siv tsis raug lossis kev puas tsuaj rau lub cev. Audiomatica yuav tsis lav ris rau kev rov qab los ntawm cov kev pabcuam ploj lossis cov ntaub ntawv. Tus neeg siv yuav tsum ua lub luag haujlwm rau qhov zoo, kev ua tau zoo, thiab lub zog ntawm Audiomatica software thiab kho vajtse rau kev siv hauv cov haujlwm tshaj lij.
• CLIO SYSTEM thiab AUDIOMATICA yog cov cim lag luam ntawm Audiomatica SRL.

INTERNAL FUNCTIONAL DIAGRAM

• Thawj daim duab qhia peb lub tsev teev rau kev ntsuas impedance (hauv Internal Mode xa mus rau CLIO software, saib tshooj 13 ntawm Cov Neeg Siv Phau Ntawv Qhia); Hauv qhov xwm txheej no, lub zog amplifier thiab inputs raug txiav thaum lub hais lus load yog nthuav nyob rau hauv parallel nrog CLIO cov tswv yim thiab tso zis; hom kev ntsuas impedance no yog nyob ntawm qhov kev paub meej ntawm tus ntsuas ntsuas qhov tso zis impedance thiab txhawb nqa DUT nrog cov cim me me. amptoj siab.
• Daim duab thib ob qhia peb txog chav tsev rau kev ntsuas qhov zaus; nyob rau hauv qhov teeb meem no, CLIO cov zis yog pub rau lub hwj chim amplifier uas tsav tus neeg hais lus nyob rau hauv kev sim thaum ib qho ntawm plaub lub tswv yim raug coj mus rau CLIO cov tswv yim.
• CEEB TOOM: thaum lub tsev tau teeb tsa rau kev ntsuas qhov ntsuas zaus nws tuaj yeem ntsuas qhov tam sim no ntws hauv DUT los ntawm ISENSE cov zis; Qhov no tso cai rau kev ntsuas impedance stimulating DUT nrog cov cim ntawm kev sib txawv amplitude mus rau qhov amplifier lub siab tshaj plaws hwj chim los yog voltage. Saib rau tshooj 13 ntawm CLIO Tus Neeg Siv Phau Ntawv Qhia.

COV KEV COB QHIA

• Cov duab hauv qab no qhia txog cov kev sib txuas yooj yim uas xav tau los ua haujlwm ntawm chav tsev.

Thov txuas (xa mus rau pem hauv ntej vaj huam sib luag):

1. Ib tus pin-to-pin cable los ntawm "Los ntawm CLIO" RCA ntsaws rau CLIO cov zis.
2. Ib tus pin-to-pin cable los ntawm "Rau CLIO" RCA ntsaws rau CLIO lub tswv yim.
   • Thov txuas (xa mus rau lub vaj huam sib luag nram qab):
3. Ib lub USB cable los ntawm USB plug mus rau lub PC dawb USB chaw nres nkoj.
4. Tus qauv IEC AC cord nyob rau hauv AC Power receptacle.

Tsis muaj lub mains hloov. Tam sim no koj tuaj yeem ntsaws AC qaum rau hauv lub qhov hluav taws xob ntawm phab ntsa thiab txheeb xyuas qhov teeb pom kev ntawm lub vaj huam sib luag pem hauv ntej LED.

DEFAULT INTERNAL SETTINGS

• QCBox Model 5 tuaj yeem ua haujlwm tau yog tias USB cable tsis txuas nrog lub PC.
• Hauv qhov tshwj xeeb no, thaum tswj software tsis tshwm sim, chav tsev ua haujlwm hauv hom hauv qab no:
• Kev teeb tsa sab hauv: zaus teb.
• Tswv yim: enabled input 1.
• I SENSE: qhib.
• Tam sim no kev tiv thaiv limiter: 2 A.

USB DRIVER INSTALLATION

Thaum txuas USB cable rau PC thiab QC Box nws yuav raug thov los ntawm kev khiav hauj lwm rau nruab ib lub cuab yeej tsav tsheb.

Nruab tus tsav tsheb hauv Windows XP

Koj yuav raug ceeb toom nrog lub dialog boxes hauv daim duab tom ntej. Xaiv 'Tsis yog. Tsis yog lub sijhawm no thiab xaiv 'Nruab los ntawm cov npe lossis qhov chaw tshwj xeeb (Advanced)'.

At the successive prompt Select ‘Nrhiav rau the best driver in these locations’ and press the ‘Browse…’ button. Choose the ‘USB Drivers\XP’ folder inside the CLIO CDROM. It will be installed on a USB Serial Converter device.

Nruab tus tsav tsheb hauv Windows Vista, 7, 8, 10 thiab 11

• Yog tias tus tsav tsheb tsis raug ntsia tau txais, thov tshuaj xyuas Tus Thawj Tswj Ntaus Ntawv; koj yuav tsum nrhiav QCBox Model V ntaus ntawv nyob rau hauv Lwm Cov Khoom Siv.
• Nyem rau ntawm QCBox Model V nkag thiab xaiv qhov hloov tshiab tsav tsheb xaiv. Ces xaiv

Xauj Kuv Lub Computer rau Tsav Tsheb Software

• Tom qab ntawd nias lub pob 'Xaiv…'. Xaiv 'USB Drivers\Vista_7_8_10_11' nplaub tshev hauv CLIO CD-ROM lossis SD.
• Thaum kawg ntawm cov txheej txheem, nws yuav raug ntsia USB Serial Converter ntaus ntawv.
• Txhawm rau txheeb xyuas qhov kev teeb tsa kom raug tshawb xyuas Device Manager hauv qab Universal Serial Bus Controllers.
• Yog tias Windows muaj peev xwm nruab ib tus neeg tsav tsheb tau thov mus rau Tus Thawj Tswj Ntaus Ntawv, tshawb xyuas qhov kev nkag tshiab USB Serial Controller nkag; peb xav kom koj sim hloov kho tus tsav tsheb uas twb muaj lawm nrog ib qho khoom nrog koj QCBox; qhov no yuav tsum ua kom muaj kev ua haujlwm zoo tshaj plaws.

SOFTWARE CONTROL

• Nws muaj peev xwm tswj tau QCBOX MODEL 5 los ntawm CLIO 8.5, CLIO 10, CLIO 11, thiab CLIO12 software.
• Raws li ib tug example, nrog CLIO 10, nyem rau ntawm Sab Nraud Hardware Khawm (lossis tsuas yog nias Shift-F4).
• Xaiv Qauv 5 hauv 'Hom' poob. Kev tswj yuav tsum muaj zog; Kev lees paub acoustic yuav tsum tau los ntawm cov khoom siv sab hauv, koj yuav tsum hnov ​​​​lawv nias thaum hloov cov khoom siv.
• Thov xa mus rau CLIO Tus Neeg Siv Phau Ntawv Qhia rau kev ua tiav cov lus teb zaus thiab ntsuas impedance.
• Nias lub khawm muab kev nkag mus rau QCBOX MODEL 5 cov yam ntxwv siab heev:
• Siv lub vaj huam sib luag no tuaj yeem xaiv DC tso zis voltage, the phantom voltage, tso zis tam sim no limiter. Qhov chaw nres nkoj GPIO tuaj yeem sau tau yooj yim los ntawm txhaj rau ntawm cov khoom tso tawm.

CALIBRATING SOFTWARE

• Nws muaj peev xwm calibrate CLIO software kom tau txais qhov siab tshaj plaws thaum ua qhov ntsuas ntsuas tam sim no. Lub calibration cia siab rau cov tswv yim ntawm qhov tseeb sensing resistor tus nqi (I Sense R) nyob rau sab nraud Hardware vaj huam sib luag.
• Nyob rau hauv lub chav tsev muaj ib tug sensing resistor ntawm nominal tus nqi ntawm 0.1 Ohm; raws li nws yog ib qho nyuaj heev los tswj xws li tus nqi qis nyob rau hauv nruj ntau lawm tswj lub software tso cai rau cov tswv yim ntawm nws cov nqi. Lub calibration cia siab rau ib qho impedance ntsuas ntawm ib tug precision resistor ntawm paub tus nqi.
• Thov sau tus nqi ntawm 0.1 Ohm; qhov no yuav ua rau koj tsim nyog precision thaum ntsuas txawm tias tsis muaj qhov ntsuas tau piav qhia hauv qab no.
• Yog hais tias koj xav mus ntxiv nrog lub calibration:

1. Siv cov resistor ntawm tus nqi paub (hauv thaj tsam 10 txog 22 Ohm); xav, example, ib tug paub resistor ntawm 10 Ohm
2. Txuas tus resisitor ncaj qha mus rau qhov tso zis (DUT) lub qhov (socket) ntawm QCBox (tsis txhob siv cov txuas txuas)
3. Tsuas ua qhov ntsuas impedance (saib tshooj 13 ntawm CLIOwin User's Manual)
4. Nyeem tus nqi ntawm nws cov modulus ntawm 1kHz; xav tias koj nyeem 9.5 Ohm
5. Muab 0.1 los ntawm 1.05 (10/9.5) kom tau 0.105
6. Muab tus nqi tshiab no
7. Tshawb xyuas calibration nrog kev ntsuas impedance tshiab

Connecting HARDWARE sab nrauv

• DB25 connector tuaj yeem siv los cuam tshuam QCBOX Model 5 nrog cov khoom siv sab nraud, kev sib txuas yog raws li qhia hauv daim duab hauv qab no:
• Yog tias koj txuas lub tsev rau cov teeb liab sab nraud, nco ntsoov siv TTL qib logic.

TXOJ CAI NTAWM KOOB PEDAL SWITCH

• Nws tuaj yeem txuas rau sab nraud ko taw pedal hloov mus rau PEDAL IN cov tswv yim ntawm lub vaj huam sib luag tom qab ntawm QCBox Model 5. Qhov no yuav ua rau QC ua haujlwm raws li tau piav qhia hauv tshooj 14 ntawm CLIO Tus Neeg Siv Khoom.

RACK mount ASSEMBLY

• Siv lub Rack QC vaj huam sib luag nws muaj peev xwm sib sau ua ke QCBOX Model 5 nrog FW-01 lossis FW-02 Suab Interface kom lawv tuaj yeem ntsia tau rau hauv tus qauv 19 "rack thav duab.

STACK mount ASSEMBLY

• Siv cov Stack mount vaj huam sib luag nws tuaj yeem sib sau ua ke QCBOX Model 5 nrog FW-01 lossis FW-02 Audio Interface kom lawv tuaj yeem muab tso rau saum ib qho.

INTERNAL SETTINGS thiab teeb meem

• Yog tias koj xav ua ib qho ntawm cov teeb tsa sab hauv uas tuaj yeem txiav lub tsev ntawm lub zog hluav taws xob thiab ua tib zoo qhib chav tsev; nrhiav SW2 los ntawm daim duab hauv qab no thiab xaiv qhov tsim nyog. Nws yog ua tau, siv lub dip hloov SW2, xaiv ib tug phantom fais fab mov ntawm txhua input nyias. Thaum ib qho hloov pauv ON lub zog phantom tam sim no ntawm qhov kev tawm tswv yim.
• Jumper J17 - Yog tias tam sim no cov tswv yim 3 yog DC txuas
• Jumper J18 - Yog tias tam sim no cov tswv yim 4 yog DC txuas
• Jumper J21 - Yog hais tias muaj lub hwj chim amplifier input yog DC txuas
• Kev teeb tsa Hoobkas pib yog lub zog phantom ntawm cov khoom siv 1 thiab 2, inputs 3 thiab 4 DC txuas, thiab lub zog amplifier AC txuas (J21 tsis tam sim no).
• © COPYRIGHT 1991-2022 BY AUDIOMATICA SRL
  
• TSEEM CEEB
  
• TSEEM CEEB 1.5, Lub Ib Hlis 2022
  
• IBM yog lub npe lag luam npe ntawm International Business Machines Corporation. Windows yog ib lub cim lag luam ntawm Microsoft Corporation.

Cov ntaub ntawv / Cov ntaub ntawv

AUDIOMATICA QCBOX MODEL 5 Hloov thiab kuaj lub thawv [ua pdf] Tus neeg siv phau ntawv QCBOX MODEL 5 Hloov thiab Ntsuas Lub Thawv, QCBOX, Qauv 5, Hloov thiab Ntsuas Lub Thawv, Ntsuas Lub Thawv

Cov ntaub ntawv

• Cov neeg siv phau ntawv