Arcshell Rechargeable Long Range Ob-Way Radios

Specifications

• DIMENSION: 9.5 x 6.75 x 6.5 po
• LUB SIJ HAWM:0.01 ua
• FREQUENCY Range: 400-470 MHz
• RF Rated zog: ≤ 5W
• CHANNEL CEEB TOOM: 16
• UA TSAUG VOLTAGE: 7V
• Hom tshuaj: Arcshell

Taw qhia

Arcshell ob-txoj kev xov tooj cua yog me me, lub teeb yuag, thiab cov xov tooj cua ua tau zoo. Lawv haum txig rau hauv tes. Cov xov tooj cua ob-txoj kev no yooj yim rau kev khiav lag luam thiab muaj cov hlua khi uas tshem tau. Ob lub xov tooj cua muaj cov zaus zoo ib yam ntawm txhua 16 raws. Nws kuj tseem muaj lub tshuab hloov pauv hloov pauv, uas tuaj yeem siv los hloov ntawm cov channel. Nws kuj yog lub suab nrov uas qhia koj tus lej channel. Cov headphones no yog rechargeable thiab muaj lub roj teeb 1500mAh uas tuaj yeem them tag nrho hauv li 2.5 teev. Lub roj teeb tuaj yeem nyob ntawm 8 mus rau 96 teev nyob ntawm koj qhov kev siv uas yog kev sib kis ntawm cov teeb liab. Txhawm rau tham hauv mic, nias lub pob. Txhua lub xov tooj cua muaj ib lub pob ntseg. Lub ntsaws ntawm lub pob ntseg no yog K-hom thiab muaj lub ntsaws ntawm 3.5mm thiab 2.5mm. qhov ntau ntawm cov xov tooj cua ob txoj kev no yog li 5 mais tsis muaj kev cuam tshuam.

COV KEV CEEV FAJ

1. Xa mus rau cov kws tshaj lij uas tsim nyog nkaus xwb.
2. Tsis txhob disassemble los yog hloov lub transceiver yog vim li cas.
3. Tsis txhob nthuav tawm lub transceiver nyob rau hauv lub hnub ncaj qha ntev ntev los yog kub heev.
4. Tsis txhob tso lub transceiver rau ntawm qhov chaw tsis ruaj khov.
5. Khaws lub transceiver tawm ntawm plua plav, noo noo, thiab dej.
6. Tsis txhob khiav lub transceiver los yog them lub roj teeb pob nyob rau hauv cov xwm txheej tawg.

UNPACKING thiab kuaj xyuas cov khoom siv

Ua tib zoo unpack lub transceiver. Peb pom zoo kom koj txheeb xyuas cov khoom uas tau teev tseg hauv cov lus hauv qab no ua ntej muab cov khoom ntim pov tseg. Yog tias ib qho khoom ploj lossis puas thaum lub sijhawm xa khoom, thov hu rau cov neeg muag khoom tam sim ntawd.

SUPPLIED ACCESSORIES

CHARGING LUB LI-ION roj teeb pob

Thov them lub roj teeb tshiab ua ntej siv nws. Lub pob tshiab los yog khaws cia (ntau tshaj ob lub hlis) roj teeb, uas tsis tuaj yeem ncav cuag nws lub peev xwm rau thawj zaug them. Tom qab 2 lossis 3 zaug them thiab tso tawm, nws tuaj yeem ncav cuag tus nqi tag nrho.

YUAV UA LI CAS YUAV TSUM PAUB TXOG COV CHAW UA HAUJ LWM

1. Txuas lub adapter rau hauv lub qhov hluav taws xob.
2. Ntxig lub transceiver lossis roj teeb rau hauv lub tais ntim khoom.
3. Xyuas kom meej tias lub roj teeb cov kev sib cuag nrog lub ncoo them lub tais kom zoo, thaum lub sij hawm them nqi, lub teeb yuav ci liab.
4. Tom qab 3 teev ntawm kev them nyiaj, qhov taw qhia LED yuav teeb ntsuab uas txhais tau tias tus nqi tag nrho. Tam sim no tshem lub roj teeb los yog lub transceiver ntawm lub ncoo them lub tais.

Nco tseg
Tsis txhob rov them lub roj teeb yog tias nws them tag nrho. Ua li no yuav ua rau lub neej ntawm lub pob roj teeb luv luv lossis lub roj teeb pob yuav puas.

INSTALLING/REV KAWM NTAWV COV roj teeb

Lub sijhawm siv ntawm JL-11 Roj Teeb Pob yog li 8 teev, uas yog raws li 5% xa / 5% tau txais / 90% standby (tus qauv lub voj voog). Saib cov duab hauv qab no:

CEEB TOOM

1. Tsis txhob luv luv Circuit Court ntawm lub roj teeb lossis pov lub roj teeb rau hauv qhov hluav taws kub.
2. Tsis txhob disassemble lub roj teeb pob koj tus kheej.

INSTALLING ANTENNA

 

Screw lub kav hlau txais xov rau hauv lub connector nyob rau sab saum toj ntawm lub transceiver los ntawm tuav lub kav hlau txais xov ntawm nws lub hauv paus thiab tig nws clockwise kom txog thaum muaj kev ruaj ntseg.

Nco tseg
Tus kav hlau txais xov tsis yog tus kov, lub nplhaib tseem ceeb tuav, lossis tus hais lus, lub microphone txuas taw tes. Kev siv lub kav hlau txais xov nyob rau hauv txoj kev no yuav ua rau lub kav hlau txais xov puas thiab ua rau koj lub transceiver ua tau zoo.

INSTALLING BELT Clip

Yog tias txoj hlua khi tsis raug ntsia, nws qhov chaw mounting yuav kub hnyiab tau thaum lub sij hawm txuas ntxiv los yog nyob rau hauv ib puag ncig rhuab.

Nco tseg
Yog tias txoj hlua khi tsis raug ntsia, nws qhov chaw mounting tuaj yeem kub thaum lub sij hawm sib kis tsis tu ncua lossis nyob rau hauv ib puag ncig zoo.

INSTALLING THE (optional) speaker/microphone

Ntxig tus hais lus/microphone ntsaws rau hauv tus hais lus/microphone jacks ntawm lub transceiver.

Nco tseg
Lub transceiver tsis tuaj yeem tiv taus dej thaum siv tus hais lus / microphone.

TAU AC QUAINTED

 

• Led Indicator- Qhov taw qhia LED teeb liab tsis tu ncua thaum kis. Thiab teeb ntsuab thaum nyob hauv kev txais tos.
• Channel Hloov-Tig nws los xaiv cov channel. No.16 channel yog scanning channel.
• POWER SWITCHNOLUME CONTROL
  Tig clockwise los hloov ON lub transceiver.

Tig counterclockwise kom hloov OFF lub transceiver. Tig los kho lub ntim.

• PTT (PUSH-TO-TALK) BUTTON

Nias lub pob no, tom qab ntawd hais rau hauv lub microphone hu rau chaw nres tsheb. Tso kom tau txais kev hu.

• MONITOR KHOOM

Nias thiab tuav (Squelch OFF) kom hnov ​​lub suab nrov tom qab; Tso kom rov qab mus ua haujlwm li qub.

• FUNCTION KEY-Tsuas nias kom qhib lub teeb muaj nuj nqi.
• Hais lus / Microphone JACKS

Kev ua haujlwm

SWITCHING POWER ON/OFF

Tig lub hwj chim hloov / ntim tswj clockwise. Koj yuav hnov ​​ib tug beep thiab hais lus, qhia tias lub transceiver yog ON.

Kho lub ntim

Tuav lub Monitor khawm kom mloog suab qib thaum tig lub Hwj chim hloov / ntim tswj. Tig clockwise kom nce thiab counterclockwise kom txo ntim.

XOV XWM CHANNEL

Tig lub channel hloov mus xaiv qhov koj xav tau channel. NO.16 yog Scanning Channel.

TRANSMITTING

• Txhawm rau xa, nias thiab tuav [PTT] thiab hais lus rau hauv lub microphone hauv koj lub suab nrov ib txwm muaj.
• Qhov taw qhia LED teeb txuas ntxiv liab thaum sib kis.
• Txhawm rau ua kom lub suab meej meej ntawm qhov chaw txais, tuav lub transceiver 2 mus rau 3 ntiv tes los ntawm lub qhov ncauj thiab tham hauv lub suab ntawm lub suab.

NYEEM NTXIV

UA QIB QIB
Lub hom phiaj ntawm Squelch yog los kaw tus neeg hais lus thaum tsis muaj teeb meem tshwm sim (Squelch OFF). Nrog rau qib squelch raug teeb tsa, koj yuav hnov ​​suab nkaus xwb thaum tau txais cov cim qhia (Squelch ON). Cov qib squelch tuaj yeem hloov kho ntawm qhov kev pab cuam software.

LUB SIJ HAWM TIMER (TOT)
Lub hom phiaj ntawm Lub Sijhawm Tawm Timer yog txhawm rau tiv thaiv ib tus neeg hu xov tooj los ntawm kev siv channel rau lub sijhawm ntev uas yuav ua rau muaj kev puas tsuaj rau cov cua sov. Lub Sijhawm Tawm Timer built-in txwv txhua lub sijhawm xa mus rau ib lub sijhawm. Lub sijhawm kis tau tus mob txuas ntxiv rau lub sijhawm koj teem sijhawm, lub suab ceeb toom yuav suab.

SCAN
Lub scan yog qhov muaj txiaj ntsig zoo rau kev saib xyuas tes ntawm koj cov frequencies uas koj nyiam. Thaum lub transceiver yog teem raws li SCAN ntawm software, tig lub channel selector rau channel 16, thiab lub transceiver yuav cia li ntes cov kev ua ub no ntawm scanning raws los ntawm 1 mus rau 15 (Txoj kev sib txawv yuav tsum tau teem).

1. Lub transceiver nres scanning ntawm zaus (los yog lub cim xeeb channel) qhov twg kuaj pom lub teeb liab. Tom qab ntawd nws tseem txuas ntxiv lossis nres scanning.
2. Yog tias muaj tsawg dua 2 channel, nws tsis tuaj yeem luam theej duab.
3. Ntawm channel 16, nias PTT thiab MONI tus yuam sij, nws yuav qhib lub SCAN, lossis tua SCAN.
4. Yog tias FM xov tooj cua ua haujlwm tau qhib, nws tsis tuaj yeem luam theej duab.

VOICE PROMPT

1. Lub Suab Prompt ON / OFF tuaj yeem teeb tsa ntawm software.
2. Ntawm channel 10, nias PTT thiab MONI tus yuam sij, tom qab ntawd hloov ntawm lub transceiver, Voice Prompt tuaj yeem muab tso tseg lossis qhib.
3. Ntawm channel 15, nias PTT thiab MONI tus yuam sij, tom qab ntawd hloov ntawm lub transceiver xaiv cov lus sib txawv ntawm lub suab.

VOX (Voice Operated Transmission)

VOX tshem tawm qhov tsim nyog ntawm manually hloov mus rau hom kis tau tus mob txhua zaus koj xav xa. Lub transceiver cia li hloov mus rau Transmission Mode thaum VOX circuitry senses tias koj tau pib hais lus rau hauv lub microphone. Thaum koj ua haujlwm VOX, koj yuav tsum siv lub mloog pob ntseg xaiv nrog lub microphone.

1. Thaum ua haujlwm VOX muaj nuj nqi, nco ntsoov teev VOX Gain qib uas tso cai rau lub transceiver kom paub txog qib suab.
2. Yog hais tias lub microphone yog rhiab heev; tus transceiver yuav pib xa tawm thaum muaj suab nrov hauv keeb kwm yav dhau.
3. Yog tias nws tsis rhiab txaus; nws yuav tsis khaws koj lub suab thaum koj pib hais lus. Nco ntsoov kho VOX nce qib mus rau qhov tsim nyog rhiab heev kom tso cai rau kev sib kis tau zoo.
   Ntawm cov channel 1-5, nias thiab tuav lub MONI thiab PTT, tom qab ntawd hloov ntawm lub transceiver, yog li txhawm rau qhib VOX cov haujlwm ON / OFF.

XOV XWM CEEV

Ntawm channel 11, nias thiab tuav lub PTT thiab MON I, tom qab ntawd hloov lub transceiver rau, yog li txhawm rau qhib lub tswb thaum muaj xwm ceev ON / OFF. Tsis tas li ntawd, ii tuaj yeem teeb tsa nrog kev pab cuam software. Yog tias qhov kev ua haujlwm yog OFF, lwm lub transceiver tau txais lub teeb liab, nws tsis tuaj yeem tswb.

Roj teeb Saver

• Lub roj teeb txuag kev ua haujlwm yuav txo qis lub zog siv thaum lub teeb liab tsis tau txais thiab tsis muaj kev ua haujlwm (tsis muaj cov yuam sij raug nias, thiab tsis muaj qhov hloov pauv).
• Thaum lub channel tsis yog tibneeg hu tauj coob thiab tsis ua haujlwm rau ntau tshaj 1 O vib nas this, roj teeb Saver tig ON.
• Thaum lub teeb liab tau txais los yog ua haujlwm tiav, Roj Teeb Saver yuav kaw.

ROJ TOM QAB LOJ LAWM
Battery Low Alert ua rau koj nco txog kev them rov qab. Thaum lub roj teeb lub zog qis heev, lub suab ceeb toom yuav suab thiab qhov taw qhia LED yuav ntsais liab. Thov recharge lossis hloov lub pob roj teeb.

MONITOR

Thaum koj tau txais thiab tsis muaj cov teeb liab tshwm sim, lub zog squelch tuaj yeem kaw tus neeg hais lus, yog li koj tsis tuaj yeem hnov ​​suab nrov tom qab. Yog tias koj xav hloov qhov kev ua haujlwm squelch OFF, nias thiab tuav [MONI] khawm. Nws muaj txiaj ntsig zoo thaum koj xav kho qhov ntim qib thiab tau txais cov cim tsis muaj zog.

TSHIAB CHANNEL LOCK-OUT (BCL)

• Busy Channel Lock-out muaj nuj nqi tuaj yeem qhib / OFF nrog kev pab cuam software ntawm txhua lub channel.
• Thaum qhib, BCL tiv thaiv koj los ntawm kev cuam tshuam nrog lwm tus tog neeg uas yuav siv tib lub channel uas koj xaiv. Nias lub PTT hloov thaum lub channel tab tom siv
• yuav ua rau koj transceiver emit lub suab ceeb toom thiab kis tau tus mob yuav inhibited (koj tsis tuaj yeem kis tau). Tso lub PTT hloov mus nres lub suab thiab rov qab mus rau hom tau txais.

CTCSS/DCS

• CTCSS (Nruam Tone Coded Squelch System) / (Digital Coded Squelch)
• Tej zaum koj yuav xav hnov ​​kev hu xov tooj los ntawm cov neeg tshwj xeeb lossis pab pawg. Hauv qhov no, siv qhov kev xaiv hu uas tso cai
• Koj yuav tsis quav ntsej kev hu xov tooj los ntawm lwm tus neeg uas siv tib zaus.
• CTCSS lossis DCS yog ib lub suab nrov nrov thiab xaiv tau los ntawm 39 lossis 83 lub suab zaus teev.

Nco tseg
CTCSS thiab DCS tsis ua rau koj qhov kev sib tham tsis pub lwm tus paub thiab sib cav. Nws tsuas pab koj los ntawm kev mloog cov lus tsis xav tau.

KEV TIV THAIV KEV TIV THAIV

NYEEM NTXIV

• Kuv puas tuaj yeem muab 2 teev?
  Yog, koj tuaj yeem ua ke txog li 4 teev.
• Puas muaj txoj hauv kev yuav 1 ntxiv? Kuv xav tau 7 tsis yog 12
  Tsis yog, cov xov tooj cua tsuas yog muag ua khub xwb.
• Puas yog nws tuaj nrog kho vajtse thiab software rau programming xov tooj cua?
  Tsis yog, nws tsis tuaj nrog ib qho software.
• Yuav tham hauv xov tooj cua li cas?
  Nias lub khawm ntawm sab ntawm lub xov tooj cua tham nrog nws.
• Ntev npaum li cas?
  Qhov kev thov ntau ntawm cov xov tooj cua no yog 5 mais.
• Puas yog lawv tsis muaj dej los yog dej-resistant?
  Tsis yog, lawv tsis waterproof lossis dej-resistant.
• Cov kav hlau txais xov puas tuaj yeem hloov tau ntev dua?
  Yog lawm, cov kav hlau txais xov tuaj yeem hloov tau ntev dua.
• Cov xov tooj cua no puas ua haujlwm nrog Motorola Headsets?
  Yog lawm, lawv ua haujlwm nrog Motorola Headsets.
• Arcshell AR 6 puas tuaj yeem ua haujlwm nrog Arcshell AR 5?
  Yog, lawv sib haum nrog ib leeg.
• Puas muaj pob ntseg?
• Yog, lawv tuaj nrog lub pob ntseg.

https://manualzz.com/doc/52932480/arcshell-ar-5-two-way-radio-user-manual

Cov ntaub ntawv

• Cov neeg siv phau ntawv