APEX WAVES PCIe-6612 Counter-Timer Device

Cov ntaub ntawv khoom

PCIe-6612 yog National Instruments DAQ ntaus ntawv uas tso cai rau cov ntaub ntawv tau los ntawm ntau lub sensors thiab cov khoom siv. Nws yog tsim los siv nrog PCI / PCI Express slots ntawm lub computer thiab los nrog cov software tsim nyog rau kev teeb tsa thiab sau cov ntaub ntawv.

Configuring the Device in NI MAX

Siv NI MAX, ntsia tau nrog NI-DAQmx, los teeb tsa koj cov cuab yeej cuab tam National.

1. Launch NI MAX.
2. Hauv Configuration pane, nyem ob npaug rau Devices thiab Interfaces kom pom cov npe ntawm cov khoom siv tau teeb tsa.

Cov ntaub ntawv no muab cov lus qhia yooj yim rau kev teeb tsa rau National Instruments PCI thiab PCI Express DAQ li. Xa mus rau cov ntaub ntawv tshwj xeeb rau koj lub cuab yeej DAQ kom paub ntau ntxiv.

Unpacking cov khoom siv

Ceev faj: Txhawm rau tiv thaiv electrostatic paug (ESD) los ntawm kev puas tsuaj rau lub cuab yeej, hauv av koj tus kheej siv lub pluaj hauv av lossis los ntawm kev tuav cov khoom hauv av, xws li koj lub computer chassis.

1. Kov lub pob antistatic rau ib feem hlau ntawm lub computer chassis.
2. Tshem tawm lub cuab yeej ntawm lub pob thiab tshuaj xyuas lub cuab yeej rau cov khoom xoob xoob lossis lwm yam cim ntawm kev puas tsuaj.
   • Ceev faj Tsis txhob kov cov pins raug tawm ntawm cov khoom sib txuas.
   • Nco tseg Tsis txhob nruab ib lub cuab yeej yog tias nws zoo nkaus li puas lawm.
3. Tshem tawm lwm yam khoom thiab cov ntaub ntawv los ntawm cov khoom siv.
   Khaws lub cuab yeej rau hauv pob antistatic thaum lub cuab yeej tsis siv.

Kev txhim kho

Txhim kho Software
Thaub qab txhua daim ntawv thov ua ntej hloov kho koj cov software. Koj yuav tsum yog Tus Thawj Coj los nruab NI software hauv koj lub computer. Xa mus rau NI-DAQmx Readme ntawm software media rau kev txhawb nqa daim ntawv thov software thiab cov qauv.

1. Yog tias tsim nyog, teeb tsa ib puag ncig kev txhim kho daim ntawv thov (ADE), xws li LabVIEW, Microsoft Visual Studio®, lossis LabWindows™/CVI™.
2. Nruab NI-DAQmx driver software.

Kev txhim kho lub cuab yeej

1. Fais fab tuag thiab unplug lub computer.
2. Nkag mus rau lub computer system expansion slots. Cov kauj ruam no yuav xav kom koj tshem tawm ib lossis ntau qhov nkag nkag ntawm lub rooj plaub hauv lub computer.
3. Nrhiav ib lub qhov sib xws thiab tshem tawm qhov sib thooj qhov npog ntawm lub computer rov qab vaj huam sib luag.
4. Kov ib qho hlau ntawm lub computer kom tso tawm cov hluav taws xob zoo li qub.
5. Ntxig lub cuab yeej rau hauv qhov siv tau PCI / PCI Express qhov system. Maj mam rub lub cuab yeej rau hauv qhov chaw. Tsis txhob yuam cov cuab yeej rau hauv qhov chaw.
   Raws li tus qauv PCI, NI PCI DAQ cov khoom siv nrog Universal PCI txuas tau txais kev txhawb nqa hauv PCI-raws li tsheb npav, suav nrog PCI-X. Koj tsis tuaj yeem nruab PCI Express li hauv PCI slots thiab rov ua dua. PCI Express cov cuab yeej txhawb nqa-plug rau hauv PCI Express qhov ntawm txoj kab dav dua. Yog xav paub ntxiv, xa mus rau ni.com/pciexpress.
   Txhim kho PCI / PCI Express Device
   • PCI / PCI Express DAQ ntaus ntawv
   • PCI / PCI Express Qhov System Qhov
   • PC nrog PCI / PCI Express Slot
6. Ruaj ntseg lub module mounting bracket rau lub computer rov qab vaj huam sib luag rail.
   Nco tseg Tightening sab saum toj thiab hauv qab mounting screws tsub kom cov neeg kho tshuab stability thiab tseem hluav taws xob txuas rau pem hauv ntej vaj huam sib luag rau lub chassis, uas yuav txhim khu lub teeb liab zoo thiab electromagnetic kev ua tau zoo.
7. Ntawm PCI Express pab kiag li lawm, xws li NI PCIe-625x/63xx, txuas lub PC thiab cov cuab yeej disk drive fais fab txuas. Xa mus rau phau ntawv qhia cov neeg siv khoom siv rau cov ntaub ntawv hais txog thaum twg yuav siv lub tshuab hluav taws xob disk drive. Siv lub zog tsav hluav taws xob txuas uas tsis nyob hauv tib lub zog hluav taws xob raws li lub hard drive.
   Txuas Disk Drive Power rau PCI Express Device
   1. Ntaus Disk Drive Power Connector
   2. PC Disk Drive Power Connector
      Nco tseg Txuas lossis txiav lub disk tsav fais fab txuas tuaj yeem cuam tshuam rau kev ua haujlwm analog ntawm koj lub cuab yeej. Txhawm rau them nyiaj rau qhov no, NI pom zoo kom koj tus kheej ntsuas lub PCI Express DAQ ntaus ntawv hauv MAX tom qab txuas lossis txiav lub disk tsav fais fab txuas; xa mus rau Configuring the Device in NI MAX section.
8. Hloov ib qho kev nkag mus rau hauv cov ntaub ntawv computer.
9. Plug thiab fais fab hauv koj lub computer.
10. Yog tias tsim nyog, teeb tsa cov khoom siv thiab / lossis lub davhlau ya nyob twg raws li tau piav qhia hauv cov lus qhia kev teeb tsa.
11. Txuas cov sensors thiab cov kab teeb liab rau lub cuab yeej, lub davhlau ya nyob twg thaiv, lossis cov khoom siv txuas ntxiv. Xa mus rau cov ntaub ntawv rau koj lub cuab yeej DAQ lossis khoom siv rau cov ntaub ntawv davhlau ya nyob twg / pinout.

Configuring the Device in NI MAX

Siv NI MAX, ntsia tau nrog NI-DAQmx, los teeb tsa koj cov cuab yeej cuab tam National.

1. Launch NI MAX.
2. Hauv Configuration pane, nyem ob npaug rau Devices thiab Interfaces kom pom cov npe ntawm cov khoom siv tau teeb tsa. Lub module yog nested nyob rau hauv lub chassis.
   Yog tias koj tsis pom koj lub cuab yeej teev tseg, nias kom rov kho cov npe ntawm cov cuab yeej nruab.
3. Txoj cai-nias lub cuab yeej thiab xaiv Kev Ntsuas Tus Kheej los ua qhov kev txheeb xyuas yooj yim ntawm cov khoom siv kho vajtse.
4. (Optional) Right-click the device and select Configure to add accessory information and configure the device.
5. Txoj cai-nias lub cuab yeej thiab xaiv Test Panels los ntsuas kev ua haujlwm ntawm cov cuab yeej.
   Nyem Pib txhawm rau sim cov cuab yeej ua haujlwm, thiab tom qab ntawd Nres thiab Kaw kom tawm ntawm lub vaj huam sib luag xeem. Yog tias lub vaj huam sib luag kuaj pom cov lus yuam kev, xa mus rau ni.com/support.
6. Yog tias koj lub cuab yeej txhawb nqa tus kheej-Calibration, right-click lub cuab yeej thiab xaiv Tus Kheej Calibrate.

Lub qhov rais qhia txog cov xwm txheej ntawm calibration. Nyem Ua kom tiav. Yog xav paub ntxiv txog Self-Calibration, xa mus rau phau ntawv qhia tus neeg siv khoom.

Nco tseg Tshem tag nrho cov sensors thiab accessories los ntawm koj lub cuab yeej ua ntej Kev Ntsuas Tus Kheej.

Programming
Ua kom tiav cov kauj ruam hauv qab no los teeb tsa kev ntsuas siv DAQ Assistant los ntawm NI MAX.

1. Hauv NI MAX, right-click Data Neighborhood thiab xaiv Tsim Tshiab los qhib DAQ Assistant.
2. Xaiv NI-DAQmx Task thiab nyem Next.
3. Xaiv Tau Cov Teeb Meem lossis Tsim Cov Teeb Meem.
4. Xaiv hom I/O, xws li analog input, thiab ntsuas hom, xws li voltage.
5. Xaiv lub cev (s) channel siv thiab nyem Next.
6. Lub npe ua haujlwm thiab nyem Finish.
7. Configure ib tug channel chaw. Txhua lub cev channel koj muab rau ib txoj haujlwm tau txais lub npe virtual channel. Nyem Paub meej rau cov ntaub ntawv qhia txog lub cev. Configure lub sij hawm thiab triggering rau koj txoj hauj lwm.
8. Nyem Khiav.

Kev daws teeb meem

• Rau cov teeb meem kev teeb tsa software, mus rau ni.com/support/daqmx.
• Rau kev daws teeb meem kho vajtse, mus rau ni.com/support thiab sau koj lub npe ntaus ntawv, lossis mus rau ni.com/kb.
• Nrhiav cov khoom siv davhlau ya nyob twg / pinout qhov chaw hauv MAX los ntawm txoj cai-nias lub npe ntaus ntawv hauv Configuration pane thiab xaiv Device Pinouts.
• Txhawm rau xa rov qab koj Cov Khoom Siv Hauv Lub Tebchaws rau kev kho lossis kho cov cuab yeej, mus rau ni.com/info thiab nkag mus rau rdsenn, uas pib cov txheej txheem xa khoom xa rov qab (RMA).

Qhov twg mus Tom ntej

Cov kev pab ntxiv muaj nyob online ntawm ni.com/gettingstarted thiab hauv NI-DAQmx Pab. Txhawm rau nkag mus rau NI-DAQmx Pab, tso NI MAX thiab mus rau Pab » Pab Pawg »NI-DAQmx»NI-DAQmx Pab.

Examples
NI-DAQmx suav nrog example cov kev pab cuam los pab koj pib tsim ib daim ntawv thov. Hloov kho example code thiab khaws cia rau hauv daim ntawv thov, lossis siv examples los tsim ib daim ntawv thov tshiab lossis ntxiv example code rau ib daim ntawv thov uas twb muaj lawm.

Mus nrhiav LabVIEW, LabWindows/CVI, Measurement Studio, Visual Basic, thiab ANSI C
examples, mus rau ni.com/info thiab nkag mus rau Info Code daqmxexp. Rau ntxiv examples, xa mus rau ni.com/examples.
Cov ntaub ntawv ntsig txog
Txhawm rau nrhiav cov ntaub ntawv rau koj lub cuab yeej DAQ lossis cov khoom siv ntxiv - suav nrog cov ntaub ntawv kev nyab xeeb, ib puag ncig, thiab cov ntaub ntawv tswj hwm - mus rau ni.com/manuals thiab sau tus lej qauv.

Kev txhawb nqa thoob ntiaj teb thiab kev pabcuam

• National Instruments website yog koj cov peev txheej tiav rau kev txhawb nqa. Ntawm ni.com/support, koj tuaj yeem nkag mus rau txhua yam los ntawm kev daws teeb meem thiab kev txhim kho daim ntawv thov kev pab tus kheej rau email thiab xov tooj kev pab los ntawm NI Application Engineers.
• Mus saib ni.com/services rau NI Factory Installation Services, kho, txuas ntxiv warranty, thiab lwm yam kev pabcuam.
• Mus saib ni.com/register txhawm rau sau npe rau koj cov khoom lag luam National Instruments. Kev sau npe ntawm cov khoom lag luam pab txhawb kev txhawb nqa thiab ua kom ntseeg tau tias koj tau txais cov ntaub ntawv tseem ceeb hloov tshiab los ntawm NI.
• National Instruments corporate headquarters nyob ntawm 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments kuj muaj chaw ua haujlwm nyob thoob ntiaj teb. Rau kev txhawb nqa xov tooj hauv Tebchaws Meskas, tsim koj daim ntawv thov kev pabcuam ntawm ni.com/support lossis hu rau 1 866 ASK MYNI (275 6964). Rau kev txhawb nqa xov tooj sab nraud Tebchaws Meskas, mus saib hauv Cov Chaw Ua Haujlwm Thoob Ntiaj Teb ntawm ni.com/niglobal kom nkag mus rau ceg haujlwm webcov chaw, uas muab cov ntaub ntawv tiv tauj tshiab, txhawb nqa xov tooj, email chaw nyob, thiab cov xwm txheej tam sim no.

Xa mus rau NI Trademarks thiab Logo Guidelines ntawm ni.com/trademarks rau cov ntaub ntawv ntawm NI trademarks. Lwm cov khoom lag luam thiab cov npe tuam txhab tau hais hauv no yog cov cim lag luam lossis cov npe lag luam ntawm lawv cov tuam txhab. Rau patents npog NI cov khoom / thev naus laus zis, xa mus rau qhov chaw tsim nyog: Pab » Patents hauv koj software, patents.txt file ntawm koj cov xov xwm, lossis National Instruments Patent Notice ntawm ni.com/patents. Koj tuaj yeem nrhiav cov ntaub ntawv hais txog daim ntawv tso cai siv kawg (EULAs) thiab cov ntawv ceeb toom kev cai lij choj thib peb hauv readme file rau koj cov khoom NI. Xa mus rau Export Cov Ntaub Ntawv Ua Raws Cai ntawm ni.com ib/
Kev cai lij choj / xa tawm-ua raws cai rau NI thoob ntiaj teb kev lag luam ua raws txoj cai thiab yuav ua li cas thiaj li tau txais HTS cov lej cuam tshuam, ECCNs, thiab lwm cov ntaub ntawv xa tawm / xa tawm. NIAJ HNUB NO YUAV TSUM PAUB TXOG LUB SIJ HAWM WARRANTIES raws li qhov tseeb ntawm LUB

Xov xwm
YUAV TSUM TAU TXAIS NTAWM NO THIAB YUAV TSIS TXAUS SIAB RAU QHOV TSEEB. Tsoom Fwv Teb Chaws Asmeskas Cov Neeg Siv Khoom: Cov ntaub ntawv muaj nyob hauv phau ntawv no yog tsim los ntawm tus kheej siv nyiaj thiab raug rau cov cai txwv thiab txwv cov ntaub ntawv raws li tau teev tseg hauv FAR 52.227-14, DFAR 252.227-7014, thiab DFAR 252.227-7015.
© 2016 National Instruments. Txhua txoj cai. 376576A-01 AUG 16

COMREHENSIVE SERVICES

Peb muaj kev sib tw kho thiab calibration kev pab cuam, nrog rau cov ntaub ntawv siv tau yooj yim thiab cov peev txheej rub tawm dawb.

Muag koj cov nyiaj seem

• Peb yuav tshiab, siv, decommissioned, thiab seem seem ntawm txhua NI series.
• Peb ua haujlwm tawm qhov kev daws teeb meem zoo tshaj plaws kom haum rau koj tus kheej xav tau.
  Muag Rau Nyiaj Ntsuab Tau txais credit Tau txais kev lag luam-hauv Deal

TSIS MUAJ NI HARDWARE IN STOCK & READY SHIP
Peb cov khoom tshiab, Tshaj Tawm Tshiab, Kho dua tshiab, thiab kho dua tshiab NI Hardware.

Kev sib txuas ntawm qhov sib txawv ntawm cov chaw tsim khoom thiab koj qhov kev sim qub txeeg qub teg.

Thov ib qhov Quote ~ Nyem qhov no  PCIe-6612

Hu rau

• 1-800-915-6216 Ib
• www.apexwaves.com
• sales@apexwaves.com

DAQ Tau Pib Phau Ntawv Qhia rau PCI / PCI Express | © National Instruments | 5

Cov ntaub ntawv / Cov ntaub ntawv

APEX WAVES PCIe-6612 Counter-Timer Device [ua pdf] Tus neeg siv phau ntawv PCIe-6612 Counter-Timer Device, PCIe-6612, Counter-Timer Ntaus, Timer Ntaus, Ntaus Ntawv

Cov ntaub ntawv

• Cov neeg siv phau ntawv