Cov ntsiab lus
zais
AOC C32G2 LCD Saib
Specifications
- Qauv: C32G2
- Backlight: LED
- Lub zog Source: 100-240V AC, Min. 5 A
- Plug Hom: Peb-pronged grounded plug
- Pom zoo Installation: Phab ntsa los yog txee nrog cov khoom siv mounting pom zoo
Cov lus qhia siv khoom
Kev nyab xeeb
- Xyuas kom lub monitor tsuas yog ua haujlwm los ntawm lub zog uas tau teev tseg rau ntawm daim ntawv lo. Siv peb-pronged grounded plug thiab tsis txhob kov yeej nws lub hom phiaj kev nyab xeeb.
- Tshem tawm lub tsev thaum muaj cua daj cua dub los yog lub sijhawm tsis ua haujlwm ntev los tiv thaiv kev puas tsuaj los ntawm hluav taws xob surges. Tsis txhob overloading hwj chim strips thiab extension cords.
Kev teeb tsa
- Tsis txhob tso lub monitor rau ntawm qhov chaw tsis ruaj khov los tiv thaiv kev raug mob thiab cov khoom puas tsuaj. Ua raws li cov chaw tsim khoom cov lus qhia rau kev teeb tsa thiab siv cov khoom siv mounting pom zoo.
- Tsis txhob muab cov khoom tso rau hauv qhov chaw saib xyuas lossis cov kua dej nchuav rau ntawm nws. Thaum txhim kho phab ntsa, siv cov khoom siv mounting pom zoo thiab tswj kom muaj qhov cua pom zoo nyob ib ncig ntawm lub monitor.
Ntxuav
- Tsis tu ncua ntxuav lub txee nrog ib daim ntaub siv cov tshuaj ntxuav tes kom tshem tawm cov stains. Tsis txhob siv cov tshuaj detergents uas yuav ua rau cov khoom puas.
- Xyuas kom tsis txhob muaj cov tshuaj ntxuav tes nkag mus rau hauv cov khoom thiab siv cov ntaub so huv huv kom tsis txhob khawb ntawm qhov screen.
Kev nyab xeeb
National Conventions
Cov ntu ntu hauv qab no piav qhia txog cov lus pom zoo uas siv hauv daim ntawv no.
Lus ceeb toom, ceeb toom, thiab ceeb toom
- Thoob plaws hauv phau ntawv qhia no, cov ntawv blocks tuaj yeem nrog lub cim thiab luam tawm hauv hom ntawv sau lossis hom ntawv qaij.
- Cov blocks no yog sau ntawv, ceeb toom, thiab ceeb toom, thiab lawv siv raws li hauv qab no.
CEEB TOOM: CEEB TOOM qhia txog cov ntaub ntawv tseem ceeb uas pab koj siv koj lub computer kom zoo dua.
CEEB TOOM: CEEB TOOM qhia txog kev puas tsuaj rau kho vajtse lossis cov ntaub ntawv poob thiab qhia koj yuav ua li cas kom tsis txhob muaj teeb meem.
CEEB TOOM: CEEB TOOM qhia txog qhov muaj peev xwm ua rau lub cev raug mob thiab qhia koj yuav ua li cas kom tsis txhob muaj teeb meem.- Qee cov lus ceeb toom yuav tshwm sim hauv lwm hom ntawv thiab tej zaum yuav tsis nrog lub cim.
- Hauv cov xwm txheej zoo li no, kev nthuav qhia tshwj xeeb ntawm cov lus ceeb toom raug yuam los ntawm txoj cai tswjfwm.
Hwj chim
- Lub monitor yuav tsum tau ua haujlwm tsuas yog los ntawm hom fais fab uas tau teev tseg rau ntawm daim ntawv lo. Yog tias koj tsis paub meej txog hom fais fab uas muab rau koj lub tsev, sab laj nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos.
- Tus saib yog nruab nrog peb-pronged grounded plug, plug nrog ib tug thib peb (grounding) tus pin. Cov ntsaws no tsuas yog haum rau hauv lub qhov hluav taws xob hauv av raws li kev nyab xeeb.
- Yog tias koj lub qhov hluav taws xob tsis haum rau peb-xaim ntsaws, muaj ib tus kws kho hluav taws xob nruab lub qhov hluav taws xob kom raug, lossis siv lub adapter rau hauv av kom ruaj ntseg.
- Tsis txhob kov yeej lub hom phiaj kev nyab xeeb ntawm lub hauv paus ntsaws.
- Unplug lub tsev thaum muaj cua daj cua dub lossis thaum nws yuav tsis siv rau lub sijhawm ntev. Qhov no yuav tiv thaiv lub monitor los ntawm kev puas tsuaj vim lub zog surges.
- Tsis txhob overload hwj chim strips thiab extension cords. Overloading tuaj yeem ua rau hluav taws kub lossis hluav taws xob poob.
- Txhawm rau ua kom muaj kev ua haujlwm txaus siab, siv lub monitor tsuas yog nrog UL teev cov khoos phis tawj uas muaj cov khoom tsim nyog tsim nyog cim ntawm 100-240V AC, Min. 5 A.
- Lub qhov (socket) phab ntsa yuav tsum tau muab tso rau ze ntawm cov khoom siv thiab yuav tsum tau yooj yim nkag mus.
Kev teeb tsa
- Tsis txhob tso tus saib rau ntawm lub tawb nqa khoom tsis ruaj khov, sawv ntsug, tripod, bracket, lossis lub rooj.
- Yog tias lub monitor ntog, nws tuaj yeem ua rau tus neeg raug mob thiab ua rau muaj kev puas tsuaj loj rau cov khoom no.
- Tsuas yog siv lub laub, sawv ntsug, tripod, bracket, lossis rooj pom zoo los ntawm cov chaw tsim khoom lossis muag nrog cov khoom no.
- Ua raws li cov chaw tsim khoom cov lus qhia thaum txhim kho cov khoom thiab siv cov khoom siv mounting pom zoo los ntawm cov chaw tsim khoom.
- Ib qho khoom lag luam thiab lub tawb nqa khoom yuav tsum muab txav nrog kev saib xyuas.
- Tsis txhob thawb ib yam khoom rau hauv lub qhov ntawm lub txee saib. Nws tuaj yeem ua rau cov khoom siv hluav taws xob puas, ua rau hluav taws kub lossis hluav taws xob poob. Tsis txhob nchuav kua rau ntawm lub monitor.
Nruab nrog sawv ntsug
Ntxuav
- Ntxuav lub txee tsis tu ncua nrog ib daim ntaub. Koj tuaj yeem siv cov xab npum mos los so cov stain, es tsis txhob muaj cov tshuaj ntxuav tes, uas yuav ua rau cov khoom txee.
- Thaum ntxuav, xyuas kom tsis txhob muaj cov tshuaj ntxuav tes nkag mus rau hauv cov khoom. Cov ntaub tu yuav tsum tsis txhob ntxhib dhau vim nws yuav khawb qhov screen.
- Thov disconnect lub hwj chim qaum ua ntej ntxuav cov khoom.
Lwm yam
- Yog hais tias cov khoom no emitting ib tug txawv txawv tsw, suab los yog pa luam yeeb, disconnect lub hwj chim plug tam sim ntawd thiab hu rau ib tug Service Center.
- Xyuas kom tseeb tias qhov qhib qhov cua tsis thaiv los ntawm lub rooj lossis ntaub thaiv.
- Tsis txhob koom nrog lub LCD saib hauv kev vibration hnyav lossis muaj kev cuam tshuam loj thaum lub sijhawm ua haujlwm.
- Tsis txhob khob lossis tso lub monitor thaum lub sijhawm ua haujlwm lossis kev thauj mus los.
Teeb tsa
Cov ntsiab lus hauv Box
- Tsis yog txhua lub teeb liab cables yuav muab rau txhua lub teb chaws thiab cheeb tsam.
- Thov kos nrog lub chaw muag khoom hauv zos lossis AOC ceg haujlwm kom paub meej.
Teeb tsa Stand & Base
- Thov teeb lossis tshem tawm lub hauv paus raws li cov kauj ruam hauv qab no.
Kev teeb tsa:
Tshem tawm:
Kho Viewhauv Angle
- Rau qhov zoo viewing nws raug pom zoo kom saib tag nrho lub ntsej muag ntawm lub monitor, tom qab ntawd kho lub monitor lub kaum sab xis rau koj nyiam.
- Tuav qhov muag kom koj tsis txhob kov lub monitor thaum koj hloov lub kaum sab xis ntawm lub monitor.
Koj tuaj yeem kho lub monitor raws li hauv qab no:
CEEB TOOM: Tsis txhob kov lub vijtsam LCD thaum koj hloov lub kaum sab xis. Nws yuav ua rau puas lossis tawg lub vijtsam LCD.
Txuas lub Monitor
Kev sib txuas cable hauv qab ntawm Saib thiab Computer.
- HDMI-2
- HDMI-1
- DisplayPort
- D-SUB
- Pob ntseg
- Hwj chim
Txuas rau PC
- Txuas lub hwj huam qaum mus rau sab nraum qab ntawm cov zaub kom ruaj khov.
- Tua koj lub computer thiab unplug nws lub hwj chim cable.
- Txuas lub teeb liab teeb liab mus rau video connector nyob tom qab ntawm koj lub computer.
- Txuas lub hwj chim qaum ntawm koj lub computer thiab koj cov zaub rau hauv lub qhov hluav taws xob nyob ze.
- Qhib koj lub computer thiab tso saib.
- Yog tias koj lub monitor pom cov duab, kev teeb tsa tiav. Yog tias nws tsis tso cov duab, thov xa mus rau Troubleshooting.
- Txhawm rau tiv thaiv cov khoom siv, ib txwm tua lub PC thiab LCD saib ua ntej txuas.
- AMD FreeSync hwm muaj nuj nqi ua haujlwm nrog DP / HDMI
- Compatible Graphics Card: Daim ntawv pom zoo yog raws li hauv qab no, kuj tuaj yeem kuaj xyuas los ntawm kev mus saib www.AMD.com
- Radeon ™ RX Vega series
- Radeon ™ RX 500 series
- Radeon ™ RX 400 series
- Radeon ™ R9 / R7 300 series (R9 370 / X, R7 370 / X, R7 265 tshwj tsis yog)
- Radeon ™ Pro Duo (2016)
- Radeon ™ R9 Nano series
- Radeon ™ R9 Fury series
- Radeon ™ R9 / R7 200 series (R9 270 / X, R9 280 / X tshwj tsis yog)
Kho
Hotkeys
| 1 | Tau qhov twg los/Auto/Exit |
| 2 | Hom kev ua si |
| 3 | Dial Point |
| 4 | Menu/Enter |
| 5 | Hwj chim |
- Menu/Enter
- Nias kom tso saib OSD lossis paub meej qhov kev xaiv.
- Hwj chim
- Nias lub hwj huam khawm kom qhib lub monitor.
- Dial Point
- Thaum tsis muaj OSD, nias lub pob Dial Point kom pom / zais qhov Dial Point.
- Hom kev ua si
- Thaum tsis muaj OSD, nias "
”tus yuam sij qhib game hom muaj nuj nqi, ces nias “"los yog" 
” tus yuam sij rau xaiv hom kev ua si (FPS, RTS, Kev Sib Tw, Gamer 1, Gamer 2 lossis Gamer 3) raws li hom kev ua si sib txawv.
- Thaum tsis muaj OSD, nias "
- Tau qhov twg los/Auto/Exit
- Thaum OSD raug kaw, nias qhov Source/Auto/Exit khawm yuav yog Qhov Chaw Kub Kub tseem ceeb ua haujlwm.
- Thaum OSD raug kaw, nias qhov Source/Auto/Exit khawm tsis tu ncua txog 2 vib nas this kom nws pib teeb tsa (tsuas yog rau cov qauv nrog D-Sub).
OSD Setting
Cov lus qhia yooj yim thiab yooj yim ntawm cov yuam sij tswj.
Nco tseg:
- Yog hais tias cov khoom tsuas muaj ib lub teeb liab input, cov khoom ntawm "Input Select" yog neeg xiam oob qhab los kho.
- ECO hom (tshwj tsis yog hom qauv), DCR, DCB hom, thiab Duab Boost, rau plaub lub xeev no, tsuas yog ib lub xeev tuaj yeem muaj nyob.
Luminance
Nco tseg: Thaum "HDR Mode" tau teeb tsa rau "tsis tawm", cov khoom "Zoo ib yam", "Ci ntsa iab", "Gamma" tsis tuaj yeem hloov kho.
Kev teeb tsa duab
|
|
moos | 0-100 : kuv | Kho daim duab Lub moos kom txo cov suab nrov Vertical-Line. |
| Theem | 0-100 : kuv | Kho Daim Duab Phase kom txo cov suab nrov kab rov tav | |
| Ntsej muag | 0-100 : kuv | Kho cov duab sharpness | |
| H. Txoj hauj lwm | 0-100 : kuv | Kho cov kab rov tav txoj hauj lwm ntawm daim duab. | |
| V. Txoj hauj lwm | 0-100 : kuv | Kho qhov ntsug ntawm daim duab. |
Xim teeb
 |
Xim Temp. | Sov | Nco qab sov xim kub los ntawm EEPROM. | |
| Ib txwm | Rov qab Cov Xim Kub Kub los ntawm EEPROM. | |||
| Txias | Nco qab txias xim kub los ntawm EEPROM. | |||
| sRGB ua | Rov qab SRGB Xim Kub los ntawm EEPROM. | |||
| Cov neeg siv | Restore Xim Kub los ntawm EEPROM. | |||
| DCB Hom | Ua kom tiav | On lossis Off | Disable lossis Enable Full Enhance Mode | |
| Daim tawv nqaij | On lossis Off | Disable lossis Enable Nature Skin Mode | ||
| Ntsuab Teb | On lossis Off | Disable lossis Enable Green Field Mode | ||
| Ntuj-xiav | On lossis Off | Disable lossis Enable Sky-blue hom | ||
| AutoDetect | On lossis Off | Disable lossis Enable AutoDetect hom | ||
| OFF | On lossis Off | Disable lossis Enable OFF hom | ||
| Demo NCO | On lossis Off | Disable lossis Enable Demo | ||
| Liab | 0-100 : kuv | Liab nce los ntawm Digital-register. | ||
| Ntsuab | 0-100 : kuv | Green nce los ntawm Digital-register. | ||
| Xiav | 0-100 : kuv | Blue nce los ntawm Digital-register. |
- Nco tseg: Thaum "HDR Mode" nyob rau hauv "Luminance" tau teeb tsa rau "tsis tawm", txhua yam khoom hauv qab "Teeb Teeb" tsis tuaj yeem hloov kho.
Duab Boost
 |
Bright Ncej | rau lossis tawm | Disable lossis Enable Bright Frame |
| Ncej Loj | 14-100 : kuv | Kho Ncej Loj | |
| Brightness | 0-100 : kuv | Kho Frame Brightness | |
| Zoo sib xws | 0-100 : kuv | Kho Frame Contrast | |
| H. txoj hauj lwm | 0-100 : kuv | Kho Ncej kab rov tav txoj hauj lwm | |
| V. txoj hauj lwm | 0-100 : kuv | Kho Ncej ntsug txoj hauj lwm |
- Nco tseg: Kho qhov ci ci, qhov sib piv, thiab txoj hauj lwm ntawm Bright Ncej kom zoo dua viewhauv kev paub.
- Thaum "HDR Mode" nyob rau hauv "Luminance" tau teeb tsa rau "tsis tawm", txhua yam khoom hauv "Duab Boost" tsis tuaj yeem hloov kho.
OSD Teeb
 |
Lus | Xaiv cov lus OSD | |
| Sijhawm | 5-120 : kuv | Kho lub sijhawm OSD | |
| DP Muaj Peev Xwm | 1.1/1.2 | Yog tias DP cov ntsiab lus video txhawb DP1.2, thov xaiv
DP1.2 rau DP Peev Xwm; txwv tsis pub, thov xaiv DP1.1. Thov nco ntsoov tias tsuas yog DP1.2 txhawb nqa AMD FreeSync hwm muaj nuj nqi |
|
| H. Txoj hauj lwm | 0-100 : kuv | Kho txoj haujlwm kab rov tav ntawm OSD | |
| V. Txoj hauj lwm | 0-100 : kuv | Kho qhov ntsug ntawm OSD | |
| Ntim | 0-100 : kuv | Volume Kho. | |
| Pob tshab | 0-100 : kuv | Kho cov pob tshab ntawm OSD | |
| Nco Nco | rau lossis tawm | Tso lus ceeb toom yog tias tus neeg siv tsis tu ncua ua haujlwm ntau dua 1 teev | |
| Cov txee Cov txee | Tawm / sab xis-up / sab xis-down / sab laug-down / sab laug-nce | Tso tawm V zaus ntawm lub ces kaum xaiv |
Kev Ua Si
 |
Hom kev ua si | FPS | Rau kev ua si FPS (thawj tus neeg tua phom) kev ua si.
Txhim kho cov ntsiab lus tsaus theem dub cov ntsiab lus. |
| RTS | Rau kev ua si RTS (Real Time Strategy). Txhim kho cov
duab zoo. |
||
| Kev sib tw | Rau kev ua si sib tw ua si, muab lub sijhawm teb ceev tshaj plaws thiab muaj xim saturation siab. | ||
| Gamer 1 | Tus neeg siv qhov kev xaiv tau txais kev cawmdim li Gamer 1. | ||
| Gamer 2 | Tus neeg siv qhov kev xaiv tau txais kev cawmdim li Gamer 2. | ||
| Gamer 3 | Tus neeg siv qhov kev xaiv tau txais kev cawmdim li Gamer 3. | ||
| tawm | Tsis muaj kev ua kom zoo dua los ntawm Smart duab game | ||
| Duab ntxoov ntxoo tswj | 0-100 : kuv | Duab ntxoov ntxoo Control Default yog 50, tom qab ntawd tus neeg siv kawg tuaj yeem kho
los ntawm 50 mus rau 100 los yog 0 kom zoo sib xws rau ib daim duab meej. 1. Yog tias ib daim duab tsaus heev kom pom cov ntsiab lus kom meej, kho ntawm 50 mus rau 100 kom pom cov duab meej. 2. Yog tias ib daim duab dawb dhau los pom qhov nthuav dav kom meej, kho ntawm 50 mus rau 0 kom pom tseeb |
|
| Xim Xim | 0-20 : kuv | Kev Ua Si Xim yuav muab 0-20 qib rau kev kho kom txaus kom tau txais daim duab zoo dua. | |
|
Low Blue Hom |
Nyeem / Chaw Ua Haujlwm / Internet / Multimedia / Off | Txo xiav lub teeb nthwv dej los ntawm kev tswj cov xim kub. | |
| Low Input Lag | On/off | Tua cov ncej tsis kom txo cov tswv yim lag | |
| Overdrive | Tsis muaj zog | Kho lub sij hawm teb. | |
| Nruab nrab | |||
| Muaj zog | |||
| Boost | |||
| Tawm | |||
| MBR | 0 ~ 20 Nws | Kho qhov Tseeb Tsog Tsog Tsog Txo. | |
| AMD FreeSync | rau lossis tawm | Disable lossis Enable AMD FreeSync hwm.
AMD FreeSync Premium Khiav Ceeb Toom: Thaum AMD FreeSync Premium feature tau qhib, tej zaum yuav muaj flashing hauv qee qhov chaw ua si. |
Nco tseg:
- Qhov kev ua haujlwm MBR thiab Overdrive Boost tsuas yog muaj thaum AMD FreeSync tawm thiab qhov ntsug zaus nce mus txog 75 Hz.
- Lub vijtsam ci yuav raug txo qis thaum kho MBR lossis Over driver setting rau Boost.
- Thaum "HDR Mode" nyob rau hauv "Luminance" tau teeb tsa rau "tsis tawm", cov khoom "Game Game", "Shadow Control", "Game Color", "Low Blue Mode" tsis tuaj yeem hloov kho.
Ntxiv
 |
Cov lus xaiv xaiv | Xaiv Cov Khoom Siv Hluav Taws Xob | |
| Nws pib kho. | yog los tsis yog | Nws pib kho daim duab rau lub neej ntawd | |
| Tawm timer | 0-24 teev | Xaiv DC lub sijhawm tawm | |
| Duab piv | Dav | Xaiv cov duab piv rau zaub. | |
| 4:3 ua | |||
| 1:1 ua | |||
| 17” (4:3) Xee XNUMX. | |||
| 19” (4:3) Xee XNUMX. | |||
| 19” (5:4) Xee XNUMX. | |||
| 19” W (16:10) | |||
| 21.5” W (16:9) | |||
| 22” W (16:10) | |||
| 23” W (16:9) | |||
| 23.6” W (16:9) | |||
| 24” W (16:9) | |||
| 27” W (16:9) | |||
| DDC/CI | yog los tsis yog | Tig ON/OFF DDC/CI Kev them nyiaj yug | |
| Rov pib dua | Yog los tsis yog | Pib dua cov ntawv qhia zaub mov rau lub neej ntawd |
Tawm
 |
Tawm | Tawm ntawm lub ntsiab OSD |
Qhov taw qhia LED
| xwm txheej | LED Xim |
| Tag Nrho Cov Hwj Huam | Dawb |
| Active-tawm hom | Txiv kab ntxwv |
Teeb meem
| Teeb meem & Lus nug | Kev daws teeb meem |
| Lub zog LED tsis yog ON | Xyuas kom tseeb tias lub hwj chim khawm yog ON thiab lub hwj chim Cord yog zoo txuas mus rau ib tug grounded hwj chim qhov hluav taws xob thiab lub monitor. |
| Tsis muaj cov duab ntawm qhov screen | Puas yog lub zog txuas txuas zoo?
Txheeb xyuas qhov txuas hluav taws xob txuas thiab lub zog siv. Puas yog kab txuas txuas raug? (Txuas siv VGA cable) Tshawb xyuas VGA cable txuas. (Txuas siv lub HDMI cable) Txheeb xyuas qhov sib txuas ntawm HDMI cable. (Txuas siv DP cable) Txheeb xyuas DP cable txuas. * VGA/HDMI/DP cov tswv yim tsis muaj nyob ntawm txhua tus qauv. Yog tias lub zog qhib, rov pib kho lub computer kom pom lub vijtsam pib (lub vijtsam nkag mus), uas tuaj yeem pom. Yog tias lub vijtsam thawj zaug (lub vijtsam nkag) tshwm, khau raj lub khoos phis tawj hauv hom siv tau (qhov kev nyab xeeb rau Windows 7/8/10) thiab tom qab ntawd hloov qhov zaus ntawm daim npav video. (Saib rau Qhov Teeb Meem Qhov Zoo Tshaj Plaws) Yog tias qhov kev tshuaj ntsuam thawj zaug (lub vijtsam nkag mus) tsis tshwm sim, hu rau Lub Chaw Pabcuam lossis koj tus neeg muag khoom. Koj puas tuaj yeem pom "Input Not Supported" ntawm qhov screen? Koj tuaj yeem pom cov lus no thaum lub teeb liab los ntawm daim npav video tshaj qhov kev daws teeb meem siab tshaj plaws thiab zaus uas tus saib tuaj yeem ua tau zoo. Kho qhov siab tshaj plaws kev daws teeb meem thiab zaus uas lub monitor tuaj yeem ua tau zoo. Xyuas kom tseeb tias AOC Monitor Tsav Tsheb raug teeb tsa. |
|
Daim duab yog Fuzzy & muaj teeb meem Ghosting Shadowing |
Kho qhov sib piv thiab Kev Ua Kom Pom Kev Zoo. Nias kom pib kho.
Xyuas kom tseeb tias koj tsis siv ib tug extension cable los yog hloov lub thawv. Peb pom zoo kom ntsaws lub saib ncaj qha mus rau daim npav video tso zis connector nyob tom qab. |
| Daim duab bounces, Flickers lossis Wave Pattern tshwm hauv daim duab | Txav cov khoom siv hluav taws xob uas yuav ua rau muaj hluav taws xob cuam tshuam kom deb li deb
los ntawm lub monitor raws li ua tau. Siv qhov siab tshaj plaws refresh npaum li cas koj saib muaj peev xwm ntawm kev daws teeb meem koj siv. |
| Saib xyuas tau nyam nyob rau hauv Active Off-Mode " | Lub Computer Power Switch yuav tsum nyob rau hauv txoj hauj lwm ON.
Lub Computer Video Card yuav tsum tau snugly haum rau hauv nws lub qhov. Xyuas kom tseeb tias tus saib lub video cable txuas nrog lub computer kom zoo. Tshawb xyuas tus saib lub video cable thiab xyuas kom meej tias tsis muaj tus pin yog khoov. Xyuas kom tseeb tias koj lub computer ua haujlwm los ntawm kev ntaus lub CAPS LOCK qhov tseem ceeb ntawm cov keyboard thaum saib CAPS LOCK LED. LED yuav tsum yog tig ON lossis OFF tom qab ntaus tus yuam sij CAPS LOCK. |
| Tsis nco ib qho ntawm cov xim thawj (RED, GREEN, lossis BLUE) | Tshawb xyuas tus saib lub video cable thiab xyuas kom meej tias tsis muaj tus pin puas lawm. Xyuas kom tseeb tias tus saib lub video cable txuas nrog lub computer kom zoo. |
| Cov duab npo tsis nyob nruab nrab lossis loj npaum li cas | Kho H-Position thiab V-Position los yog nias kub-key (AUTO). |
| Daim duab muaj xim tsis xws luag (dawb tsis zoo li dawb) | Kho RGB xim lossis xaiv xim kub uas xav tau. |
| Kab rov tav lossis ntsug cuam tshuam ntawm qhov screen | Siv Windows 7/8/10 shut-down hom los kho CLOCK thiab FOCUS. Nias kom kho nws tus kheej. |
| Txoj Cai & Kev Pabcuam | Thov xa mus rau Regulation & Service Information, uas yog nyob rau hauv phau ntawv CD los yog www.aoc.com ua (kom nrhiav tau tus qauv koj yuav hauv koj lub tebchaws thiab nrhiav Kev Cai & Cov Ntaub Ntawv Kev Pabcuam hauv nplooj ntawv txhawb nqa. |
Specification
General Specification
| Vaj huam sib luag | Model npe | C32G2 | ||
| Tsav tsheb | TFT Xim LCD | |||
| ViewTau Duab Loj | 80.1cm kab pheeb ces kaum | |||
| Pixel suab | 0.36375mm (H) x 0.36375mm (V) | |||
| Video | HDMI lnterface & DP Interface & VGA Interface | |||
| Sib cais Sync. | H/V TTL | |||
| Zaub Xim | 16.7M Xim | |||
| Lwm tus | Kab rov tav scan ntau yam | 30k-160kHz (D-SUB)
30k-200kHz (HDMI, DP) |
||
| Kab rov tav scan Size (Maximum) | 698.4 hli | |||
| Ntsuas ntsuas ntau yam | 48-144Hz (D-SUB)
48-165Hz (HDMI, DP) |
|||
| Vertical Scan Size (Maximum) | 392.85 hli | |||
| Optimal preset daws teeb meem | 1920 × 1080 @ 60Hz | |||
| Max daws teeb meem | 1920 × 1080 @ 60Hz (D-SUB)
1920 × 1080 @ 165Hz (HDMI, DP) |
|||
| Plug & Ua Si | VESA DDC2B/CI | |||
| Cov khoom siv txuas | HDMIx2/DP/VGA | |||
| Lub tswv yim yees duab teeb liab | Analog: 0.7Vp-p (tus qauv), 75 OHM, TMDS | |||
| Rau Cov Khoom Txuas Txuas | Pob ntseg tawm | |||
| Hwj chim Source | 100-240V, 50/60Hz | |||
| Kev siv fais fab | Hom (default brightness thiab contrast) | 43 W | ||
| Max. (brightness = 100, sib piv = 100) | ≤ 55W | |||
| Kev txuag hluav taws xob | ≤ 0.3W | |||
| Cov yam ntxwv ntawm lub cev | Hom Connector | VGA/HDMI/DP/Earphone tawm | ||
| Hom kab teeb liab | Detachable | |||
| Ib puag ncig | Kub | Kev khiav haujlwm | 0° ~ 40° | |
| Tsis ua haujlwm | -25° ~ 55° | |||
| Cov av noo | Kev khiav haujlwm | 10% ~ 85% (tsis-condensing) | ||
| Tsis ua haujlwm | 5% ~ 93% (tsis-condensing) | |||
| Qhov siab | Kev khiav haujlwm | 0 ~ 5000 m (0 ~ 16404ft) | ||
| Tsis ua haujlwm | 0 ~ 12192m (0 ~ 40000ft) | |||
Preset Display Hom
| STANDARD | RESOLUTION | HORIZONTAL FREQUENCY (kHz) | VERTICAL FREQUENCY (Hz) |
| VGA | 640 × 480 @ 60Hz | 31.469 | 59.94 |
| VGA | 640 × 480 @ 67Hz | 35 | 66.667 |
| VGA | 640 × 480 @ 72Hz | 37.861 | 72.809 |
| VGA | 640 × 480 @ 75Hz | 37.5 | 75 |
| VGA | 640 × 480 @ 100Hz | 51.08 | 99.769 |
| VGA | 640 × 480 @ 120Hz | 61.91 | 119.518 |
| DOS MODE | 720 × 400 @ 70Hz | 31.469 | 70.087 |
| DOS MODE | 720 × 480 @ 60Hz | 29.855 | 59.710 |
| SD | 720 × 576 @ 50Hz | 31.25 | 50 |
| SWVGA | 800 × 600 @ 56Hz | 35.156 | 56.25 |
| SWVGA | 800 × 600 @ 60Hz | 37.879 | 60.317 |
| SWVGA | 800 × 600 @ 72Hz | 48.077 | 72.188 |
| SWVGA | 800 × 600 @ 75Hz | 46.875 | 75 |
| SWVGA | 800 × 600 @ 100Hz | 63.684 | 99.662 |
| SWVGA | 800 × 600 @ 120Hz | 76.302 | 119.97 |
| SWVGA | 832 × 624 @ 75Hz | 49.725 | 74.551 |
| XGA | 1024 × 768 @ 60Hz | 48.363 | 60.004 |
| XGA | 1024 × 768 @ 70Hz | 56.476 | 70.069 |
| XGA | 1024 × 768 @ 75Hz | 60.023 | 75.029 |
| XGA | 1024 × 768 @ 100Hz | 81.577 | 99.972 |
| XGA | 1024 × 768 @ 120Hz | 97.551 | 119.989 |
| WXGA+ | 1440 × 900 @ 60Hz | 55.935 | 59.887 |
| SXGA | 1280 × 1024 @ 60Hz | 63.981 | 60.02 |
| SXGA | 1280 × 1024 @ 75Hz | 79.975 | 75.025 |
| HD | 1280 × 720 @ 50Hz | 37.071 | 49.827 |
| HD | 1280 × 720 @ 60Hz | 45 | 60 |
| HD | 1280 × 1080 @ 60Hz | 67.173 | 59.976 |
| CVT | 1680 × 1050 @ 60Hz | 64.674 | 59.883 |
| Full HD | 1920 × 1080 @ 60Hz | 67.5 | 60 |
| Full HD | 1920 × 1080 @ 100Hz | 113.21 | 99.93 |
| Full HD | 1920 × 1080 @ 120Hz | 137.26 | 119.982 |
| Full HD | 1920 × 1080 @ 144Hz | 158.1 | 144 |
| Full HD | 1920 × 1080 @ 165Hz | 183.154 | 165 |
Tus Pin Txoj Haujlwm
| Tus Pin No. | Lub Npe Lub Npe | Tus Pin No. | Lub Npe Lub Npe | Tus Pin No. | Lub Npe Lub Npe |
| 1. | TMDS Cov Ntaub Ntawv 2+ | 9. | Cov ntaub ntawv TMDS 0- | 17. | DDC/CEC Av |
| 2. | TMDS Data 2 Shield | 10. | TMDS Moos + | 18. | + 5V lub zog |
| 3. | Cov ntaub ntawv TMDS 2- | 11. | TMDS Clock Shield | 19. | Kub Plug Ntes |
| 4. | TMDS Cov Ntaub Ntawv 1+ | 12. | TMDS Moos- | ||
| 5. | TMDS Cov Ntaub Ntawv 1Shield | 13. | CEC | ||
| 6. | Cov ntaub ntawv TMDS 1- | 14. | Reserved (NC ntawm lub cuab yeej) | ||
| 7. | TMDS Cov Ntaub Ntawv 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Shield | 16. | SDA |
20-Pin Xim Zaub Teeb Teeb Cable
| Tus Pin No. | Lub Npe Lub Npe | Tus Pin No. | Lub Npe Lub Npe |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | CONFIG 1 |
| 4 | ML_Lane 2 (n) | 14 | CONFIG 2 |
| 5 | GND | 15 | AUX_CH (p) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Kub Plug Ntes |
| 9 | ML_Lane 1 (p) | 19 | Rov qab DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
15-Pin Xim Zaub Teeb Teeb Cable
| Tus Pin No. | Lub Npe Lub Npe | Tus Pin No. | Lub Npe Lub Npe |
| 1 | Video - Liab | 9 | + 5 V |
| 2 | Video - Ntsuab | 10 | Hauv av |
| 3 | Video - Xiav | 11 | NC |
| 4 | NC | 12 | DDC-Serial cov ntaub ntawv |
| 5 | Ntes Cable | 13 | H-sib |
| 6 | GND-R | 14 | V-sync |
| 7 | GND-G | 15 | DDC-Serial moos |
| 8 | GND-B |
Plug thiab Ua Si
Plug & Ua Si DDC2B Feature
- Lub monitor no tau nruab nrog VESA DDC2B peev xwm raws li VESA DDC STANDARD.
- Nws tso cai rau tus saib xyuas kom ceeb toom rau tus tswv tsev ntawm nws tus kheej thiab, nyob ntawm qib ntawm DDC siv, sib txuas lus ntxiv txog nws cov peev xwm tso saib.
- Lub DDC2B yog ob-txoj kev cov ntaub ntawv channel raws li I2C raws tu qauv. Tus tswv tsev tuaj yeem thov EDID cov ntaub ntawv hla DDC2B channel.
- www.aoc.com ua
- © 2019 AOC. All Rights Reserved.
FAQ
- Q: Kuv puas tuaj yeem siv lub zog hluav taws xob rau lub monitor?
- A: Tsis yog, lub monitor yuav tsum tsuas yog ua los ntawm hom fais fab uas teev rau ntawm daim ntawv lo (100-240V AC, Min. 5A).
- Q: Nws puas muaj kev nyab xeeb los ntxuav lub monitor nrog cov tshuaj ntxuav tes kom zoo?
- A: Tsis yog, nws raug pom zoo kom siv cov tshuaj ntxuav muag kom tsis txhob cauterizing cov khoom txee.
Cov ntaub ntawv / Cov ntaub ntawv
 |
AOC C32G2 LCD Saib [ua pdf] Tus neeg siv phau ntawv C32G2 LCD Saib, C32G2, LCD Saib, Saib |