AOC 24E3H2 LCD Saib

Kev nyab xeeb

National Conventions

Cov ntu ntu hauv qab no piav qhia txog cov lus pom zoo uas siv hauv daim ntawv no.

Lus ceeb toom, ceeb toom, thiab ceeb toom

Thoob plaws hauv phau ntawv qhia no, cov ntawv blocks tuaj yeem nrog lub cim thiab luam tawm hauv hom ntawv bold lossis hom ntawv italic. Cov blocks no yog sau ntawv, ceeb toom, thiab ceeb toom, thiab lawv tau siv raws li hauv qab no:

CEEB TOOM: CEEB TOOM qhia txog cov ntaub ntawv tseem ceeb uas pab koj siv koj lub computer kom zoo dua.

CEEB TOOM: CEEB TOOM qhia txog kev puas tsuaj rau kho vajtse lossis cov ntaub ntawv poob thiab qhia koj yuav ua li cas kom tsis txhob muaj teeb meem.

CEEB TOOM: CEEB TOOM qhia txog qhov muaj peev xwm ua rau lub cev raug mob thiab qhia koj yuav ua li cas kom tsis txhob muaj teeb meem. Qee cov lus ceeb toom yuav tshwm sim hauv lwm hom ntawv thiab tej zaum yuav tsis nrog lub cim. Hauv cov xwm txheej zoo li no, kev nthuav qhia tshwj xeeb ntawm cov lus ceeb toom raug yuam los ntawm txoj cai tswjfwm.

Hwj chim

Lub monitor yuav tsum tau ua haujlwm tsuas yog los ntawm hom fais fab uas tau teev tseg rau ntawm daim ntawv lo. Yog tias koj tsis paub meej txog hom fais fab uas muab rau koj lub tsev, sab laj nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos.

Unplug lub tsev thaum muaj cua daj cua dub lossis thaum nws yuav tsis siv rau lub sijhawm ntev. Qhov no yuav tiv thaiv lub monitor los ntawm kev puas tsuaj vim lub zog surges.

Tsis txhob overload hwj chim strips thiab extension cords. Overloading tuaj yeem ua rau hluav taws kub lossis hluav taws xob poob.

Txhawm rau ua kom muaj kev ua haujlwm txaus siab, siv lub monitor tsuas yog nrog UL teev cov khoos phis tawj uas muaj cov khoom tsim nyog tsim nyog cim ntawm 100-240V AC, Min. 5 A.

Lub qhov (socket) phab ntsa yuav tsum tau muab tso rau ze ntawm cov khoom siv thiab yuav tsum tau yooj yim nkag mus.

Kev teeb tsa

Tsis txhob tso lub monitor rau ntawm lub laub tsis ruaj khov, sawv ntsug, tripod, bracket, lossis rooj. Yog tias lub monitor ntog, nws tuaj yeem ua rau tus neeg raug mob thiab ua rau muaj kev puas tsuaj loj rau cov khoom no. Tsuas yog siv lub laub, sawv ntsug, tripod, bracket, lossis rooj pom zoo los ntawm cov chaw tsim khoom lossis muag nrog cov khoom no. Ua raws li cov chaw tsim khoom cov lus qhia thaum txhim kho cov khoom thiab siv cov khoom siv mounting pom zoo los ntawm cov chaw tsim khoom. Ib qho khoom siv thiab lub laub ua ke yuav tsum tau txav mus nrog kev saib xyuas.

Tsis txhob thawb ib yam khoom rau hauv lub qhov ntawm lub txee saib. Nws tuaj yeem ua rau cov khoom siv hluav taws xob puas ua rau hluav taws kub lossis hluav taws xob poob. Tsis txhob nchuav kua rau ntawm lub monitor.

Tsis txhob muab cov khoom tso rau pem hauv ntej.

Yog tias koj mount lub monitor rau ntawm phab ntsa lossis txee, siv cov khoom siv mounting pom zoo los ntawm cov chaw tsim khoom thiab ua raws li cov lus qhia ntawm cov khoom siv.

Cia qee qhov chaw nyob ib ncig ntawm lub monitor raws li qhia hauv qab no. Txwv tsis pub, huab cua ncig yuav ua tsis tiav vim li no overheating yuav ua rau hluav taws kub los yog puas rau lub monitor.

Kom tsis txhob muaj kev puas tsuaj, rau example lub vaj huam sib luag tev tawm ntawm lub bezel, xyuas kom meej tias lub monitor tsis qaij downward ntau tshaj -5 degrees. Yog tias -5 degree downward qaij lub kaum sab xis siab tshaj, qhov kev saib xyuas kev puas tsuaj yuav tsis raug them raws li warranty.

Saib hauv qab no cov chaw ua pa pom zoo nyob ib ncig ntawm lub monitor thaum lub monitor raug ntsia rau ntawm phab ntsa lossis ntawm qhov muag:

Ntxuav

Ntxuav lub txee tsis tu ncua nrog dej-damped, ntaub mos.

Thaum ntxuav siv cov paj rwb mos los yog ntaub microfiber. Cov ntaub yuav tsum yog damp thiab yuav luag qhuav, tsis txhob tso kua rau hauv rooj plaub.

Thov disconnect lub hwj chim qaum ua ntej ntxuav cov khoom.

Lwm yam

Yog hais tias cov khoom no emitting ib tug txawv txawv tsw, suab los yog pa luam yeeb, disconnect lub hwj chim plug tam sim ntawd thiab hu rau ib tug Service Center.

Xyuas kom tseeb tias qhov qhib qhov cua tsis thaiv los ntawm lub rooj lossis ntaub thaiv.

Tsis txhob koom nrog lub LCD saib hauv kev vibration hnyav lossis muaj kev cuam tshuam loj thaum lub sijhawm ua haujlwm.

Tsis txhob khob lossis tso lub monitor thaum lub sijhawm ua haujlwm lossis kev thauj mus los.

Cov hlua hluav taws xob yuav tsum tau pom zoo rau kev nyab xeeb. Rau lub teb chaws Yelemees, nws yuav tsum yog H03VV-F, 3G, 0.75 mm2, lossis zoo dua. Rau lwm lub teb chaws, cov hom tsim nyog yuav tsum tau siv raws li.

Lub suab siab dhau ntawm lub pob ntseg thiab lub mloog pob ntseg tuaj yeem ua rau tsis hnov ​​​​lus. Kev hloov ntawm qhov sib npaug ntawm qhov siab tshaj plaws nce lub pob ntseg thiab lub mloog pob ntseg tso zis voltage thiab yog li ntawd lub suab siab theem.

Teeb tsa

Cov ntsiab lus hauv Box

*Tsis yog txhua lub teeb liab cables yuav muab rau txhua lub teb chaws thiab cheeb tsam. Thov kos nrog lub chaw muag khoom hauv zos lossis AOC ceg haujlwm kom paub meej.

Teeb tsa Stand & Base

Thov teeb lossis tshem tawm lub hauv paus raws li cov kauj ruam hauv qab no.

Kev teeb tsa:

Tshem tawm:

Kho Viewhauv Angle

Rau qhov zoo viewing nws raug pom zoo kom saib tag nrho lub ntsej muag ntawm lub monitor, tom qab ntawd kho lub monitor lub kaum sab xis rau koj tus kheej nyiam.

Tuav qhov muag kom koj tsis txhob kov lub monitor thaum koj hloov lub kaum sab xis ntawm lub monitor.

Koj tuaj yeem kho lub monitor raws li hauv qab no:

CEEB TOOM:
Tsis txhob kov lub vijtsam LCD thaum koj hloov lub kaum sab xis. Kov lub vijtsam LCD yuav ua rau muaj kev puas tsuaj.

CEEB TOOM:

1. Txhawm rau kom tsis txhob muaj kev puas tsuaj rau lub vijtsam, xws li kev tshem tawm vaj huam sib luag, xyuas kom meej tias lub monitor tsis qaij qis qis dua -5 degrees.
2. Tsis txhob nias lub vijtsam thaum kho lub kaum sab xis ntawm lub monitor. tuav tsuas yog lub bezel.

Txuas lub Monitor

Cable Connections Hauv qab ntawm Monitor:

1. Hwj chim
2. HDMI 1
3. HDMI 2
4. Pob ntseg

Txuas rau PC

1. Txuas lub hwj huam qaum mus rau sab nraum qab ntawm cov zaub kom ruaj khov.
2. Tua koj lub computer thiab unplug nws lub hwj chim cable.
3. Txuas lub teeb liab teeb liab mus rau lub video connector ntawm koj lub computer.
4. Txuas lub hwj chim qaum ntawm koj lub computer thiab koj cov zaub rau hauv lub qhov hluav taws xob nyob ze.
5. Qhib koj lub computer thiab tso saib.
   Yog tias koj lub monitor pom cov duab, kev teeb tsa tiav. Yog tias nws tsis tso cov duab, thov mus saib Kev daws teeb meem.

Txhawm rau tiv thaiv cov khoom siv, ib txwm tua lub PC thiab LCD saib ua ntej txuas.

Phab ntsa Mounting

Npaj rau Nruab Ib Qhov Kev Xaiv Phab Ntsa Mounting Arm.

Cov saib no tuaj yeem txuas rau phab ntsa mounting caj npab koj yuav nyias.
Tshem tawm lub hwj chim ua ntej cov txheej txheem no.

Ua raws li cov kauj ruam no:

1. Tshem lub hauv paus.
2. Ua raws li cov chaw tsim khoom cov lus qhia kom sib sau ua ke ntawm phab ntsa mounting caj npab.
3. Muab phab ntsa mounting caj npab rau sab nraum qab ntawm lub monitor. Teem lub qhov ntawm caj npab nrog lub qhov nyob hauv qab ntawm lub monitor.
4. Ntxig 4 screws rau hauv lub qhov thiab nruj.
5. Reconnect cov kab. Xa mus rau tus neeg siv phau ntawv uas tuaj nrog cov kev xaiv phab ntsa mounting caj npab rau cov lus qhia ntawm kev txuas mus rau phab ntsa.

Sau tseg: VESA mounting ntsia hlau qhov tsis muaj rau txhua tus qauv, thov nrog tus neeg muag khoom lossis chaw ua haujlwm ntawm AOC.

* Cov qauv tsim yuav txawv ntawm cov duab kos.

CEEB TOOM:

1. Txhawm rau kom tsis txhob muaj kev puas tsuaj rau lub vijtsam, xws li kev tshem tawm vaj huam sib luag, xyuas kom meej tias lub monitor tsis qaij qis qis dua -5 degrees.
2. Tsis txhob nias lub vijtsam thaum kho lub kaum sab xis ntawm lub monitor. tuav tsuas yog lub bezel.

Kho

Hotkeys

1	Source/Exit
2	Lub zeem muag pom tseeb /
3	Volume/>
4	Menu/Enter
5	Hwj chim

Menu/Enter
Thaum tsis muaj OSD, Nias kom tso saib OSD lossis paub meej qhov kev xaiv.

Hwj chim
Nias lub hwj huam khawm kom qhib lub monitor.

Volume/>
Thaum tsis muaj OSD, Nias > Volume khawm kom nquag ntim hloov bar, Nias < lossis> hloov ntim.

Source/Exit
Thaum OSD raug kaw, nias Source/Exit khawm yuav yog qhov tseem ceeb kub ua haujlwm.
Thaum OSD raug kaw, nias qhov chaw / tawm khawm txuas ntxiv li 2 thib ob los ua nws pib teeb tsa (tsuas yog rau cov qauv nrog D-Sub).

Lub zeem muag ntshiab

1. Thaum tsis muaj OSD, Nias lub "<" khawm kom qhib lub zeem muag pom tseeb.
2. Siv cov ">" lossis ">" khawm los xaiv ntawm qhov tsis muaj zog, nruab nrab, muaj zog, lossis tawm chaw. Default setting yog ib txwm "tawm".
   
3. Nias thiab tuav "<" khawm rau 5 vib nas this kom qhib lub qhov muag pom kev pom tseeb, thiab cov lus ntawm "Clear Vision Demo: on" yuav tso tawm ntawm lub vijtsam rau 5 vib nas this. Nias Menu lossis Exit khawm, cov lus yuav ploj mus. Nias thiab tuav “<” khawm rau 5 vib nas this dua, Clear Vision Demo yuav raug kaw.
   
   Clear Vision muaj nuj nqi muab cov duab zoo tshaj plaws viewing kev paub los ntawm kev hloov cov kev daws teeb meem tsawg thiab cov duab tsis pom tseeb rau hauv cov duab meej thiab tiag tiag.

OSD Setting

Cov lus qhia yooj yim thiab yooj yim ntawm cov yuam sij tswj.

1. Nias lub MENU-khawm kom qhib OSD qhov rais.
2. Xovxwm Sab laug los yog Txoj cai los ntawm kev ua haujlwm. Thaum qhov xav tau muaj nuj nqi tseem ceeb, nias lub MENU-khawm kom qhib nws, nias Sab laug los yog Txoj cai rau kev taug kev los ntawm sub menu functions. Thaum qhov xav tau muaj nuj nqi tseem ceeb, nias MENU-khawm kom qhib nws.
3. Xovxwm Sab laug los yog hloov qhov chaw ntawm cov haujlwm uas tau xaiv. Xovxwm tawm mus. Yog tias koj xav kho lwm yam haujlwm, rov ua cov kauj ruam 2-3.
4. OSD Lock Function: Txhawm rau xauv OSD, nias thiab tuav MENU-khawm thaum lub monitor kaw thiab tom qab ntawd nias lub hwj chim khawm kom tig lub saib. Txhawm rau qhib OSD - nias thiab tuav lub MENU-khawm thaum lub monitor kaw thiab tom qab ntawd nias lub hwj chim khawm kom tig lub saib.

Nco tseg:

1. Yog tias cov khoom tsuas muaj ib lub teeb liab tawm tswv yim, cov khoom ntawm "Input Select" yog lov tes taw kho.
2. DCB hom thiab Duab Boost, rau peb lub xeev no tsuas muaj ib lub xeev xwb.

Luminance

	Zoo sib xws	0-100 : kuv		Sib piv los ntawm Digital-register.
	Brightness	0-100 : kuv		Backlight Kho.
	Eco hom	Txuj		Hom qauv.
		Ntawv nyeem		Hom ntawv nyeem.
		Internet		Internet hom.
		Kev ua si		Hom kev ua si.
		Movie		Movie hom.
		Kev ua kis las		Hom kev ua si.
		Nyeem ntawv		Hom nyeem ntawv.
	Gamma	Gamma 1		Kho rau Gamma 1.
		Gamma 2		Kho rau Gamma 2.
		Gamma 3		Kho rau Gamma 3.
	DCR	On		Pab kom dynamic contrast ratio.
		Tawm		Disable dynamic contrast ratio.
	HDR hom	Tawm		Xaiv HDR hom.
		HDR Duab
		HDR Movie
		HDR Game

Nco tseg:
Thaum "HDR hom" tau teem rau "tsis-tawm", cov khoom "Contrast", "ECO", "Gamma" tsis tuaj yeem hloov kho.
Thaum "Color Gamut" nyob rau hauv "Xim Teeb" yog teem rau "sRGB", cov khoom "Contrast", "ECO", "Gamma", "HDR Mode" tsis tuaj yeem hloov kho.

Xim teeb

	Xim Temp.	Sov	Nco qab sov xim kub los ntawm EEPROM.
		Ib txwm	Rov qab Cov Xim Kub Kub los ntawm EEPROM.
		Txias	Nco qab txias xim kub los ntawm EEPROM.
		Cov neeg siv	Restore Xim Kub los ntawm EEPROM.
	Xim Gamut	Vaj Huam Sib Luag	Txheem xim chaw vaj huam sib luag.
		sRGB ua	Rov qab SRGB Xim Kub los ntawm EEPROM.
	LowBlue hom	Nyeem ntawv / Chaw Haujlwm / Internet / Multimedia / Tawm	Txo xiav lub teeb nthwv dej los ntawm kev tswj cov xim kub.
	Liab	0-100 : kuv	Liab nce los ntawm Digital-register.
	Ntsuab	0-100 : kuv	Green nce los ntawm Digital-register.
	Xiav	0-100 : kuv	Blue nce los ntawm Digital-register.
	DCB Hom	Ua kom tiav	Disable lossis Enable Full Enhance Mode
		Daim tawv nqaij	Disable lossis Enable Nature Skin Mode
		Ntsuab Teb	Disable lossis Enable Green Field Mode
		Ntuj-xiav	Disable lossis Enable Sky-blue hom
		AutoDetect	Disable lossis Enable AutoDetect hom
		Tawm	Disable lossis Enable DCB hom
	Demo NCO	On lossis Off	Disable lossis Enable Demo

Nco tseg:
Thaum "HDR Mode" nyob rau hauv "Luminance" tau teeb tsa rau "tsis tawm", txhua yam khoom hauv qab "Teeb Teeb" tsis tuaj yeem hloov kho.
Thaum "Color Gamut" yog teem rau "sRGB", tag nrho cov khoom nyob rau hauv "Xim Teeb" tsis tuaj yeem hloov kho.

Duab Boost

	Bright Ncej	rau lossis tawm	Disable lossis Enable Bright Frame
	Ncej Loj	14-100 : kuv	Kho Ncej Loj
	Brightness	0-100 : kuv	Kho Frame Brightness
	Zoo sib xws	0-100 : kuv	Kho Frame Contrast
	H. txoj hauj lwm	0-100 : kuv	Kho Ncej kab rov tav txoj hauj lwm
	V. txoj hauj lwm	0-100 : kuv	Kho Ncej ntsug txoj hauj lwm

Nco tseg:
Kho qhov ci ci, qhov sib piv, thiab txoj hauj lwm ntawm Bright Ncej kom zoo dua viewhauv kev paub.
Thaum "HDR Mode" nyob rau hauv "Luminance" tau teeb tsa rau "tsis tawm", txhua yam khoom hauv "Duab Boost" tsis tuaj yeem hloov kho.

OSD Teeb

	Lus		Xaiv cov lus OSD
	Sijhawm	5-120 : kuv	Kho lub sijhawm OSD
	H. Txoj hauj lwm	0-100 : kuv	Kho txoj haujlwm kab rov tav ntawm OSD
	V. Txoj hauj lwm	0-100 : kuv	Kho qhov ntsug ntawm OSD
	Pob tshab	0-100 : kuv	Kho cov pob tshab ntawm OSD
	Nco Nco	rau lossis tawm	Tso lus ceeb toom yog tias tus neeg siv tsis tu ncua ua haujlwm ntau ntxiv tshaj 1h

Kev Ua Si

	Hom kev ua si	Tawm	Tsis muaj optimization los ntawm Game Mode.
		FPS	Rau kev ua si FPS (Thawj Tus Neeg Shooters) kev ua si. Txhim kho cov ntsiab lus tsaus theem dub cov ntsiab lus.
		RTS	Rau kev ua si RTS (Lub Sij Hawm Tiag Tiag). Txhim kho cov duab zoo.
		Kev sib tw	Rau kev ua si sib tw ua si, Muab ceev tshaj plaws teb lub sij hawm thiab siab xim saturation.
		Gamer 1	Tus neeg siv qhov kev xaiv tau txais kev cawmdim li Gamer 1.
		Gamer 2	Tus neeg siv qhov kev xaiv tau txais kev cawmdim li Gamer 2.
		Gamer 3	Tus neeg siv qhov kev xaiv tau txais kev cawmdim li Gamer 3.
	Duab ntxoov ntxoo tswj	0-100 : kuv	Duab ntxoov ntxoo Default yog 50, tom qab ntawd cov neeg siv kawg tuaj yeem hloov kho los ntawm 50 txog 100 lossis 0 kom nce qhov sib txawv kom pom meej. Yog tias daim duab tsaus dhau kom pom qhov nthuav dav, kho ntawm 50 txog 100 kom pom meej. Yog tias daim duab dawb dhau kom pom qhov nthuav dav, kho ntawm 50 txog 0 kom pom meej
	Adaptive-Sync	On lossis Off	Disable lossis Enable Adaptive-Sync.c Adaptive-Sync Run Reminder: Thaum Adaptive-Sync feature qhib, tej zaum yuav muaj flashing hauv qee qhov chaw ua si.
	Xim Xim	0-20 : kuv	Game Xim yuav muab 0-20 qib rau kev kho kom saturation kom tau cov duab zoo dua.
	Overdrive	Tsis muaj zog	Kho lub sij hawm teb.
		Nruab nrab
		Muaj zog
		Tawm
	Cov txee Cov txee	Tawm / sab xis-up / sab xis-down / sab laug-down / sab laug-nce	Tso saib V zaus ntawm lub ces kaum xaiv
	Dial Point	On lossis Off	Qhov "Dial Point" muaj nuj nqi muab qhov taw qhia taw rau hauv nruab nrab ntawm kev tshuaj ntsuam los pab gamers ua si Thawj Tus Neeg Shooter (FPS) ua si nrog qhov tseeb thiab meej lub hom phiaj.

Nco tseg:
Thaum "HDR Hom" nyob rau hauv "Luminance" yog teem rau "tsis-tawm", cov khoom "Game Mode", "Shadow Control", "Game Color" yuav tsis raug kho.
Thaum "Color Gamut" nyob rau hauv "Color Setup" yog teem rau "sRGB", cov khoom "Game Mode", "Shadow Control", "Game Color" tsis tuaj yeem hloov kho.

Ntxiv

	Cov lus xaiv xaiv		Xaiv Cov Khoom Siv Hluav Taws Xob
	Tawm timer	0-24 teev	Xaiv DC lub sijhawm tawm
	Duab piv	Dav	Xaiv cov duab piv rau zaub.
		4:3 ua
	DDC/CI	Yog los tsis yog	Tig ON/OFF DDC/CI Kev them nyiaj yug
	Rov pib dua	Yog los tsis yog	Pib dua cov ntawv qhia zaub mov rau lub neej ntawd

Tawm

Tawm

Tawm ntawm lub ntsiab OSD

Qhov taw qhia LED

xwm txheej	LED Xim
Tag Nrho Cov Hwj Huam	Dawb
Active-tawm hom	Txiv kab ntxwv

Teeb meem

Teeb meem & Lus nug	Kev daws teeb meem
Lub zog LED tsis yog ON	Xyuas kom tseeb tias lub hwj chim khawm yog ON thiab lub hwj chim Cord yog zoo txuas mus rau ib tug grounded hwj chim qhov hluav taws xob thiab lub monitor.
Tsis muaj cov duab ntawm qhov screen	Puas yog lub zog txuas txuas zoo? Txheeb xyuas qhov txuas txuas hluav taws xob thiab lub zog hluav taws xob. Puas yog video cable txuas raug lawm?? (Txuas siv lub HDMI cable) Txheeb xyuas qhov sib txuas ntawm HDMI cable. (Txuas siv DP cable) Txheeb xyuas DP cable txuas. * HDMI / DP cov tswv yim tsis muaj nyob rau txhua tus qauv. Yog tias lub hwj chim qhib, rov qhib lub khoos phis tawj kom pom qhov screen thawj zaug (lub vijtsam nkag mus.) Yog tias lub vijtsam pib (lub vijtsam nkag) tshwm, khau raj lub khoos phis tawj hauv hom siv tau (kev nyab xeeb rau Windows 7/8/10) thiab tom qab ntawd hloov qhov zaus ntawm daim npav video. (Saib rau Qhov Teeb Meem Qhov Zoo Tshaj Plaws) Yog tias qhov kev tshuaj ntsuam thawj zaug (lub vijtsam nkag mus) tsis tshwm sim, hu rau Service Center los yog koj tus neeg muag khoom. Koj puas tuaj yeem pom "Input Not Supported" ntawm qhov screen? Koj tuaj yeem pom cov lus no thaum lub teeb liab los ntawm daim npav video tshaj qhov kev daws teeb meem siab tshaj plaws thiab zaus uas tus saib tuaj yeem ua tau zoo. Kho qhov siab tshaj plaws kev daws teeb meem thiab zaus uas lub monitor tuaj yeem ua tau zoo. Xyuas kom tseeb tias AOC Monitor Tsav Tsheb raug teeb tsa.
Daim duab yog Fuzzy & muaj teeb meem Ghosting Shadowing	Kho qhov Contrast thiab Brightness Controls. Nias kub-key (AUTO) kom nws pib-kho. Xyuas kom tseeb tias koj tsis siv ib tug extension cable los yog hloov lub thawv. Peb pom zoo kom ntsaws lub saib ncaj qha mus rau daim npav video tso zis txuas rau sab nraub qaum.
Daim duab bounces, Flickers lossis Wave Pattern tshwm hauv daim duab	Tsiv cov cuab yeej hluav taws xob uas tuaj yeem ua rau cuam tshuam hluav taws xob kom deb ntawm lub monitor li sai tau. Siv qhov siab tshaj plaws refresh npaum li cas koj saib muaj peev xwm ntawm kev daws teeb meem koj siv.
Monitor nyob rau hauv Active Off- Hom”	Lub Computer Power Switch yuav tsum nyob rau hauv txoj hauj lwm ON. Lub Computer Video Card yuav tsum tau snugly haum rau hauv nws lub qhov. Xyuas kom tseeb tias tus saib lub video cable txuas nrog lub computer kom zoo. Tshawb xyuas tus saib lub video cable thiab xyuas kom meej tias tsis muaj tus pin yog khoov. Xyuas kom tseeb tias koj lub computer ua haujlwm los ntawm kev ntaus tus yuam sij CAPS LOCK ntawm cov keyboard thaum saib CAPS LOCK LED. Lub LED yuav tsum tig ON lossis OFF tom qab ntaus tus yuam sij CAPS LOCK.
Tsis nco ib qho ntawm cov xim thawj (RED, GREEN, lossis BLUE)	Tshawb xyuas tus saib lub video cable thiab xyuas kom meej tias tsis muaj tus pin puas lawm. Xyuas kom tseeb tias tus saib lub video cable txuas nrog lub computer kom zoo.
Cov duab npo tsis nyob nruab nrab lossis loj npaum li cas	Kho H-Position thiab V-Position los yog nias kub-key (AUTO).
Daim duab muaj xim tsis xws luag (dawb tsis zoo li dawb)	Kho RGB xim lossis xaiv xim kub uas xav tau.
Kab rov tav lossis ntsug cuam tshuam ntawm qhov screen	Siv Windows 7/8/10 shut-down hom los kho CLOCK thiab FOCUS. Nias kub-key (AUTO) kom nws pib-kho.
Txoj Cai & Kev Pabcuam	Thov xa mus rau Regulation & Service Information uas nyob rau hauv phau ntawv CD los yog www.aoc.com ua (kom pom tus qauv koj yuav hauv koj lub tebchaws thiab nrhiav Kev Cai & Cov Ntaub Ntawv Kev Pabcuam hauv nplooj ntawv txhawb nqa.)

Specification

General Specification

Vaj huam sib luag	Model npe	24 E3H2
	Tsav tsheb	TFT Xim LCD
	ViewTau Duab Loj	60.47cm : kuv
	Pixel suab	0.2745 (H) mm x 0.2745 (V) mm
	Zaub Xim	16.7M Xim
Lwm tus	Kab rov tav scan ntau yam	30k-115kHz
	Kab rov tav scan Size (Maximum)	527.04 hli
	Ntsuas ntsuas ntau yam	48-100Hz
	Vertical Scan Size (Maximum)	296.46 hli
	Optimal preset daws teeb meem	1920 × 1080 @ 60Hz
	Max daws teeb meem	1920 × 1080 @ 100Hz
	Plug & Ua Si	VESA DDC2B/CI
	Hwj chim Source	100-240V~ 50/60Hz 1.5A
	Kev siv fais fab	Hom (default brightness thiab contrast)		17 W
		Max. (brightness = 100, sib piv = 100)		≤ 24W
		Standby hom		≤ 0.3W
Cov yam ntxwv ntawm lub cev	Hom Connector	HDMI 1 / HDMI 2 / Earphone
	Hom kab teeb liab	Detachable
Ib puag ncig	Kub	Kev khiav haujlwm	0 ° C ~ 40 ° C
		Tsis ua haujlwm	-25 ° C ~ 55 ° C
	Cov av noo	Kev khiav haujlwm	10% ~ 85% (tsis-condensing)
		Tsis ua haujlwm	5% ~ 93% (tsis-condensing)
	Qhov siab	Kev khiav haujlwm	0 ~ 5000 m (0 ~ 16404ft)
		Tsis ua haujlwm	0 ~ 12192m (0 ~ 40000ft)

Preset Display Hom

Txuj	Kev daws teeb meem (± 1Hz)	Kab rov tav Zaus (kHz)	Vertical zaus (Hz)
VGA	640 × 480 @ 60Hz	31.469	59.94
	640 × 480 @ 72Hz	37.861	72.809
	640 × 480 @ 75Hz	37.500	75.000
MAC MODES VGA	640 × 480 @ 67Hz	35.000	66.667
IB MODE	720 × 400 @ 70Hz	31.469	70.087
SWVGA	800 × 600 @ 56Hz	35.156	56.25
	800 × 600 @ 60Hz	37.879	60.317
	800 × 600 @ 72Hz	48.077	72.188
	800 × 600 @ 75Hz	46.875	75.000
MAC MIDE SVGA	832 x 624 @ 75Hz	49.725	74.500
XGA	1024 × 768 @ 60Hz	48.363	60.004
	1024 × 768 @ 70Hz	56.476	70.069
	1024 × 768 @ 75Hz	60.023	75.029
SXGA	1280 × 1024 @ 60Hz	63.981	60.020
	1280 × 1024 @ 75Hz	79.976	75.025
WSXG	1280 × 720 @ 60Hz	45.000	60.000
	1280 × 960 @ 60Hz	60.000	60.000
WXGA+	1440 × 900 @ 60Hz	55.935	59.876
WSXGA +	1680 × 1050 @ 60Hz	65.290	59.954
FHD	1920 × 1080 @ 60Hz	67.500	60.000
	1920 × 1080 @ 75Hz	83.909	74.986
	1920 × 1080 @ 100Hz	110.000	100.000

Nco tseg: Raws li VESA tus qauv, tej zaum yuav muaj ib qho yuam kev (+/-1Hz) thaum xam qhov refresh npaum li cas ( teb zaus) ntawm txawv operating systems thiab graphics phaib. Txhawm rau txhim kho kev sib raug zoo, qhov nominal refresh tus nqi ntawm cov khoom no tau raug muab sib dhos. Thov xa mus rau qhov khoom tiag.

Tus Pin Txoj Haujlwm

19-Pin Xim Zaub Teeb Teeb Cable

Tus Pin No.	Lub Npe Lub Npe	Tus Pin No.	Lub Npe Lub Npe	Tus Pin No.	Lub Npe Lub Npe
1.	TMDS Cov Ntaub Ntawv 2+	9.	Cov ntaub ntawv TMDS 0-	17.	DDC/CEC Av
2.	TMDS Data 2 Shield	10.	TMDS Moos +	18.	+ 5V lub zog
3.	Cov ntaub ntawv TMDS 2-	11.	TMDS Clock Shield	19.	Kub Plug Ntes
4.	TMDS Cov Ntaub Ntawv 1+	12.	TMDS Moos-
5.	TMDS Cov Ntaub Ntawv 1Shield	13.	CEC
6.	Cov ntaub ntawv TMDS 1-	14.	Reserved (NC ntawm lub cuab yeej)
7.	TMDS Cov Ntaub Ntawv 0+	15.	SCL
8.	TMDS Data 0 Shield	16.	SDA

Plug thiab Ua Si

Plug & Ua Si DDC2B Feature

Lub monitor no tau nruab nrog VESA DDC2B peev xwm raws li VESA DDC STANDARD. Nws tso cai rau tus saib xyuas kom ceeb toom rau tus tswv tsev ntawm nws tus kheej thiab, nyob ntawm qib ntawm DDC siv, sib txuas lus ntxiv txog nws cov peev xwm tso saib.

Lub DDC2B yog ob-txoj kev cov ntaub ntawv channel raws li I2C raws tu qauv. Tus tswv tsev tuaj yeem thov EDID cov ntaub ntawv hla DDC2B channel.

www.aoc.com ua
© 2023 AOC. All Rights Reserved.

Cov ntaub ntawv / Cov ntaub ntawv

AOC 24E3H2 LCD Saib [ua pdf] Tus neeg siv phau ntawv 24E3H2 LCD Saib, 24E3H2, LCD Saib, Saib

Cov ntaub ntawv

• Cov neeg siv phau ntawv