Kev nkag mus & Kev sib koom ua ke

TROVE Access thiab Power Integration Solution

Trove1DM1
- Trove1 enclosure nrog Altronix / DMP backplane (TDM1)
TDM1
- Altronix / DMP backplane nkaus xwb
Trove2DM2
- Trove2 enclosure nrog Altronix / DMP backplane (TDM2)
TDM2
- Altronix / DMP backplane nkaus xwb
TXM 2
- DMP qhov rooj rov qab rau Trove2 thiab Trove3
Daim ntawv qhia kev teeb tsa
Tag nrho cov npe lag luam yog cov cuab yeej ntawm lawv cov tswv.
Rev. TSO 103017
Installing tuam txhab: _______
Lub Npe Lub Npe: ________
Chaw nyob: _________________
Xov tooj #: _________________

Tshajview:

Trove1DM1 thiab Trove2DM2 haum DMP 734/734N Wiegand Modules nrog lossis tsis muaj Altronix cov khoom siv hluav taws xob thiab khoom siv rau kev nkag mus rau kev tswj hwm.
Cov Npe Npe Npe:

• UL 294 – 6th edition: Kab Security I, Destructive Attack I, Endurance IV, Stand-by Power II*. * Stand-by Power Level I yog tias tsis muaj roj teeb nkag.
• Chav kawm B cov cuab yeej digital no ua raws li Canadian ICES-003. Cet appareil numérique de la classe B yog conforme á la norme NMB-003 du Canada.
• CE European Conformity.

Specifications:

• 16 Gauge backplane thiab enclosure nrog ample knockouts kom yooj yim nkag.

Trove1DM1
Trove1 enclosure nrog TDM1 Altronix / DMP backplane

• Xws li: tamper hloov, cam xauv, xauv ceev, thiab mounting hardware. Enclosure Dimensions (H x W x D): 18 "x 14.5" x 4.625" (457mm x 368mm x 118mm).

TDM1
Altronix/DMP backplane nkaus xwb

• Xws li mounting hardware.
  Qhov Loj (H x W x D): 16.625 "x 12.5" x 0.3125" (422.3mm x 317.5mm x 7.9mm).

TDM1 haum rau kev sib xyaw ua ke ntawm cov hauv qab no:
Altronix Modules:

• Ib (1) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB lossis eFlow104NB.
• Ib (1) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6.

DMP Module:

• Txog yim (8) DMP 734/734N modules.

Trove2DM2
Trove2 enclosure nrog TDM2 Altronix / DMP backplane

• Xws li: tamper hloov, cam xauv, xauv ceev, thiab mounting hardware. Enclosure Dimensions (H x W x D): 27.25 "x 21.75" x 6.5" (692.2mm x 552.5mm x 165.1mm).

TDM2
Altronix/DMP backplane nkaus xwb 

• Xws li mounting hardware.
  Qhov Loj (H x W x D): 25.375 "x 19.375" x 0.325" (644.5mm x 482.6mm x 8.3mm)

TDM2 haum rau kev sib xyaw ua ke ntawm cov hauv qab no:
Altronix Modules:

• Ob (2) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB lossis eFlow104NB.
• Ob (2) ACM8(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6. DMP Module:
•  Mus txog kaum rau (16) DMP 734/734N modules.

TXM 2
DMP qhov rooj backplane nkaus xwb

• Xws li mounting hardware.
  Qhov Loj (H x W x D): 23.75 "x 18.125" x 0.3125" (603.3mm x 460.3mm x 7.9mm).

TDMD2 haum rau kev sib xyaw ua ke ntawm DMP boards hauv qab no:

• Ib (1) XR150 lossis XR550 pawg thawj coj saib thiab mus txog peb (3) ntau thaj tsam 714 nthuav dav boards txog li plaub caug yim (48) thaj chaw.

Cov lus qhia rau kev teeb tsa rau Trove1 thiab Trove2:

1. Tshem tawm lub nraub qaum ntawm lub qhov rooj ua ntej mounting (tsis txhob muab pov tseg kho vajtse).
2. Trove1DM1 (Pg. 7):
   Kos thiab predrill qhov ntawm phab ntsa kom kab nrog rau sab saum toj ob lub qhov tseem ceeb hauv lub qhov rooj. Nruab ob sab saum toj fasteners thiab screws nyob rau hauv phab ntsa nrog cov ntsia hlau taub hau protruding. Muab lub qhov rooj xauv lub qhov rooj sab saud ntawm ob lub qhov rooj sab saud; qib thiab ruaj ntseg. Kos txoj hauj lwm ntawm ob lub qhov qis. Tshem tawm qhov thaiv. Laum lub qhov hauv qab thiab nruab ob lub fasteners. Muab lub qhov rooj xauv lub qhov rooj sab sauv rau ntawm ob lub qhov rooj sab saud. Nruab ob lub hau qis thiab xyuas kom nruj tag nrho cov ntsia hlau.
   Trove2DM2 (Pg. 8):
   Kos thiab predrill qhov ntawm phab ntsa kom kab nrog rau sab saum toj peb keyhoes nyob rau hauv lub enclosure. Nruab peb lub fasteners thiab screws nyob rau hauv lub phab ntsa nrog cov ntsia hlau taub hau rotruding. Muab lub qhov rooj ntawm lub qhov rooj sab saud rau ntawm peb lub qhov rooj sab saud; qib thiab ruaj ntseg. Kos rau txoj hauj lwm ntawm peb lub qhov qis. Tshem tawm qhov thaiv. Laum lub qhov hauv qab thiab nruab peb lub fasteners. Muab lub qhov rooj ntawm lub qhov rooj sab saud rau ntawm peb lub qhov rooj sab saud. Nruab peb lub hauv qab screws thiab xyuas kom nruj tag nrho cov ntsia hlau.
3. Mount suav nrog UL Listed tamper hloov (Altronix Model TS112 los yog sib npaug) nyob rau hauv qhov chaw xav tau, rov qab pob khawm. Swb lub tamper hloov bracket mus rau ntawm ntug ntawm lub qhov rooj ze li 2 "los ntawm sab xis (Fig. 1, pg. 1). Txuas tamper hloov cov xaim mus rau Access Control Vaj Huam Sib Luag cov tswv yim lossis cov khoom qhia UL uas tsim nyog. Txhawm rau qhib lub tswb ceeb toom qhib lub qhov rooj ntawm lub qhov rooj.
4. Mount Altronix/DMP modules rau TDM1 lossis TDM2 backplane, xa mus rau nplooj 3, 4.

TDM1: Kev teeb tsa ntawm Altronix Power Supply thiab / lossis Sub-Assembly Boards thiab DMP 734/734N Wiegand Modules

1. Fasten spacers (muab) rau pems uas phim lub qhov qauv rau Altronix Power Supply/Chargers los yog Altronix
   Sub-Assembly boards (Fig. 2, pg. 3). Txuas hlau spacers rau hauv qhov chaw kom raug, saib hauv qab no (Fig. 2, pg. 3).
2. Mount boards rau spacers siv 5/16 "yias lub taub hau screws (muab) (Daim duab 2, 2a, pg. 3).
3. Mount DMP 734/734N modules rau hauv txoj haujlwm raug (Fig. 2, pg. 3):
   ib. fasten spacers kom haum pem pem hauv ntej (Fig. 2, 2b, pg. 3).
   b. tshem tawm DMP 734/734N board los ntawm lub tsev yas. Siv lub hauv paus ib feem ntawm lub tsev nyob rau mount rau TDM1 (Fig. 2b, pg. 3).
   c. ruaj lub hauv paus ntawm DMP 734/734N rau lub spacers siv muab 5/16 "yias taub hau screws.
   d. ua txhua qhov kev sib txuas tsim nyog ua ntej rov sib dhos DMP 734/734N Wiegland.
4. Fasten TDM1 backplane rau Trove1 enclosure siv lub lauj kaub taub hau screws (muab).

Fig. 2 – Trove1DM1/TDM1 Configurations

TDM2: Kev teeb tsa ntawm Altronix Power Supply thiab / lossis Sub-Assembly Boards thiab DMP 734/734N Wiegand Modules

1. Fasten spacers (muab) rau pems uas phim lub qhov qauv rau Altronix Power Supply/Chargers los yog Altronix Sub-Assembly boards (Fig. 3, pg. 4). Txuas hlau spacers rau hauv qhov chaw kom raug, saib hauv qab no (Fig. 3, pg. 4).
   Nco tseg: Txhua Altronix sub-assembly txoj haujlwm tuaj yeem ua raws li ib qho (1) ACM8 / ACM8CB, PD4UL / PD4ULCB, PD8UL / PD8ULCB, MOM5, PDS8 (CB) lossis VR6.
2. Mount boards rau spacers siv 5/16 "yias lub taub hau screws (muab) (Daim duab 3, 3a, pg. 4).
3. Mount DMP 734/734N modules rau hauv txoj haujlwm raug (Fig. 3, pg. 4):
   ib. fasten spacers kom haum pem pem hauv ntej (Fig. 3, 3b, pg. 4).
   b. tshem tawm DMP 734/734N board los ntawm lub tsev yas. Siv lub hauv paus ib feem ntawm lub tsev nyob rau mount rau TDM2 (Fig. 3b, pg. 4).
   c. ruaj lub hauv paus ntawm DMP 734/734N rau lub spacers siv muab 5/16 "yias taub hau screws.
   d. ua txhua qhov kev sib txuas tsim nyog ua ntej rov sib dhos DMP 734/734N Wiegland.
4. Fasten TDM2 backplane rau Trove2 enclosure siv lub lauj kaub taub hau screws (muab).

Fig. 3 – Trove2DM2/TDM2 Configurations

Trove1DM1 / TDM1 / Trove2DM2 / TDM2 / TDMD2 Daim ntawv qhia kev teeb tsa

TDMD2: Configuration ntawm DMP Boards:

1. Mounting 714 expansion boards:
   ib. Fasten spacers (muab) rau hauv pem hauv ntej configuration ntawm backplane (Fig. 4, pg. 5).
   b. Mount boards rau spacers siv 5/16 "yias taub hau screws (muab) (Fig. 4a, pg. 5).
2. Mounting XR150 lossis XR550 board siv lub bracket (muab):
   ib. Thawb ob (2) lub taub hau taub hau screws (muab) los ntawm qhov sib thooj ntawm lub nraub qaum rov qab (Daim duab 4b, pg. 5, Kauj Ruam 1).
   b. Mount bracket nrog slits rau sab laug ntawm screws thiab ruaj ntseg nrog ob (2) xauv ceev (muab) (Daim duab 4b, pg. 5, Kauj Ruam 2).
   c. Fasten ob (2) spacers (muab) rau hauv pem hauv ntej mounting.
   d. Orient DMP XR150 lossis XR550 yog li lub davhlau ya nyob twg thaiv yog sab laug. Xaub lub ntug ntawm lub rooj tsavxwm mus rau hauv lub bracket lub slits
   (Daim duab 1b, pg. 2, Kauj Ruam 3) thiab ruaj ntseg lub rooj tsavxwm rau spacers nrog ob (2) lauj kaub taub hau screws (muab).
3. Mount backplane rau enclosure lub qhov rooj nrog kho vajtse.

Fig. 4 – TDMD2 Configuration

TDM1 Dimensions (H x W x D):
16.625 "x 12.5" x 0.3125" (422.3mm x 317.5mm x 7.9mm)

TDM2 Dimensions (H x W x D):
25.375 "x 19.375" x 0.325" (644.5mm x 482.6mm x 8.3mm)

TDMD2 Dimensions (H x W x D):
23.75 "x 18.125" x 0.3125" (603.3mm x 460.3mm x 7.9mm)

Trove1DM1 Enclosure Dimensions (H x W x D):
18 "x 14.5" x 4.625" (457mm x 368mm x 118mm)

Trove2DM2 Enclosure Dimensions (H x W x D):
27.25 "x 21.75" x 6.5" (692.2mm x 552.5mm x 165.1mm)

Altronix tsis yog lub luag haujlwm rau txhua qhov yuam kev typographical.
140 58th Street, Brooklyn, New York 11220 USA
xov tooj: 718-567-8181 Ib
fev: 718-567-9056 Ib
web qhov chaw: www.altronix.com 
e-mail: yog info@altronix.com 
Lub neej Warranty
IITrove1DM1 / TDM1 / Trove2DM2 / TDM2 / TDMD2

Cov ntaub ntawv / Cov ntaub ntawv

Altronix TROVE Access thiab Power Integration Solution [ua pdf] Daim ntawv qhia kev teeb tsa Trove1DM1, TDM1, Trove2DM2, TDM2, TDMD2, TROVE Access and Power Integration Solution, TROVE, Access and Power Integration Solution, Fais Fab Integration Solution, Access Integration Solution, Integration Solution

Cov ntaub ntawv

• Cov neeg siv phau ntawv