Ntau tshaj li lub zog xwb.™

Kev nkag mus & Kev sib koom ua ke
Altronix / SALTO Cov Khoom Siv

T2SAK7F8 Trove Access thiab Power Integration

Qauv suav nrog:
T1SAK3F4
4-Qhov Rooj Cov Khoom Siv nrog Fused Outputs Cov khoom siv sib dhos tag nrho suav nrog:
- Trove1 enclosure with TSA1 Altronix/SALTO backplane
- (1) eFlow6NB - Fais fab mov / Charger
– (1) ACM4 – Fused Access Power Controller
– (1) VR6 – Voltage Regulator
– (1) PDS8 – Dual Input Power Distribution Module

T2SAK7F8
8 Qhov Rooj Cov Khoom Siv nrog Fused Outputs Lub siab Cov khoom siv sib dhos muaj xws li:
- Trove2 enclosure with TSA2 Altronix/SALTO backplane
- (1) eFlow104NB - Fais fab mov / Charger
– (1) ACM8 – Fused Access Power Controller
– (1) VR6 – Voltage Regulator
– (1) PDS8 – Dual Input Power Distribution Module

T2SAK75F12
12-Qhov Rooj Cov Khoom Siv nrog Fused Outputs Cov khoom siv sib dhos tag nrho suav nrog:
- Trove2 enclosure with TSA2 Altronix/SALTO backplane
- (1) eFlow104NB - Fais fab mov / Charger
- (1) eFlow102NB - Fais fab mov / Charger
– (1) ACM8 – Fused Access Power Controller
– (1) ACM4 – Fused Access Power Controller
– (1) PDS8 – Dual Input Power Distribution Module

Tag nrho cov khoom ntawm cov khoom siv Trove no yog UL Sau npe ua cov khoom sib dhos.
Thov xa mus rau cov ntaub ntawv qhia txog kev teeb tsa Sub-Assembly Installation rau cov lus qhia ntxiv.

Daim ntawv qhia kev teeb tsa

Tag nrho cov npe lag luam yog cov cuab yeej ntawm lawv cov tswv.
Rev. TSAK032919

Lub Tuam Txhab Txhim Kho: ___________________________________ Lub Npe Lub Npe: __________________
Chaw Nyob: __________________________________ Xov tooj #: ____________

Tshajview:

Altronix Trove SALTO cov khoom siv tau ua ntej thiab suav nrog Trove1SA1 lossis Trove2SA2 enclosure / backplane nrog Hoobkas-ntsia Altronix fais fab mov / charger thiab sub-assemblies. Cov khoom siv no kuj haum rau ntau yam kev sib txuas ntawm SALTO modules txog li kaum ob (12) qhov rooj hauv ib lub qhov rooj.

Configuration Chart:

Cov lus qhia installation:

Txoj kev xaim yuav tsum ua raws li National Electrical Code/NFPA 70/ANSI, thiab nrog rau tag nrho cov cai hauv zos thiab cov tub ceev xwm muaj cai.
Cov khoom yog npaj rau kev siv sab hauv tsev nkaus xwb.

1. Tshem lub nraub qaum (s) ntawm lub qhov rooj. Tsis txhob muab pov tseg hardware.
2. Kos thiab predrill qhov nyob rau hauv phab ntsa kom kab nrog rau sab saum toj peb keyhoes nyob rau hauv lub enclosure. Nruab peb lub fasteners thiab screws nyob rau hauv phab ntsa nrog cov ntsia hlau taub hau protruding. Muab lub qhov rooj xauv lub qhov rooj sab sauv rau ntawm peb lub qhov rooj sab saud, theem, thiab ruaj ntseg. Kos rau txoj hauj lwm ntawm peb lub qhov qis. Tshem tawm qhov thaiv. Laum lub qhov hauv qab thiab nruab peb lub fasteners. Muab lub qhov rooj ntawm lub qhov rooj sab saud rau ntawm peb lub qhov rooj sab saud. Nruab peb lub hauv qab screws thiab xyuas kom nruj tag nrho cov ntsia hlau.
3. Mount suav nrog UL Listed tamper hloov (Altronix Model TS112 lossis sib npaug) nyob rau hauv qhov chaw xav tau, rov qab pob khawm. Swb lub tamper hloov lub bracket mus rau ntawm ntug ntawm lub enclosure kwv yees li 2 "los ntawm sab xis (Fig. 1, pg. 2). Txuas lub tamper hloov cov xaim mus rau Access Control Vaj Huam Sib Luag cov tswv yim lossis cov khoom qhia UL uas tsim nyog. Txhawm rau qhib lub tswb ceeb toom qhib lub qhov rooj ntawm lub qhov rooj.
4.  Mount SALTO modules to TSA2 backplane, xa mus rau pg. 3, 4, 5.
5. Xa mus rau eFlow Fais Fab Supply/Charger Installation Guide eFlow6NB, eFlow102NB, eFlow104NB, thiab cov ntaub ntawv qhia kev teeb tsa Sub-Assembly rau ACM4, ACM8, PDS8, VR6 rau cov lus qhia txuas ntxiv.

Kho vajtse:

T1SAK3F4: Kev teeb tsa ntawm SALTO Modules:

1. Fasten spacers rau hlau cwj mem configuration (A) ntawm lub backplane (Fig. 2, pg. 3).
2. Txoj hauj lwm SALTO modules tshaj qhov sib thooj spacers thiab mount lawv siv lub lauj kaub taub hau screws (muab) (Daim duab 2a, pg. 3).
3. Mount lub backplane mus rau lub enclosure nrog kho vajtse.

Access Controller Position Chart rau cov qauv hauv qab no:

SALTO Access Controller	Pem Mounting
CU42E0, CU4200 lossis CU4EB8	A

T2SAK7F8: Kev teeb tsa ntawm SALTO Modules:

1. Fasten spacers rau hlau cwj mem configuration (A) ntawm lub backplane (Fig. 3, pg. 4).
2. Txoj hauj lwm SALTO modules tshaj qhov sib thooj spacers thiab mount lawv siv lub lauj kaub taub hau screws (muab) (Daim duab 3a, pg. 4).
3. Mount lub backplane mus rau lub enclosure nrog kho vajtse.

Access Controller Position Chart rau cov qauv hauv qab no:

SALTO Access Controller	Pem Mounting
CU42E0, CU4200 lossis CU4EB8	A

T2SAK75F12: Kev teeb tsa ntawm SALTO Modules:

1. Fasten spacers rau hlau cwj mem configuration (A) ntawm lub backplane (Fig. 4, pg. 5).
2. Txoj hauj lwm SALTO modules tshaj qhov sib thooj spacers thiab mount lawv siv lub lauj kaub taub hau screws (muab) (Daim duab 4a, pg. 5).
3. Mount lub backplane mus rau lub enclosure nrog kho vajtse.

Access Controller Position Chart rau cov qauv hauv qab no:

SALTO Access Controller	Pem Mounting
CU42E0, CU4200 lossis CU4EB8	A

eFlow Power Supply/Chargers tuaj yeem tswj tau thiab saib xyuas thaum Qhia Txog Lub Hwj Chim / Kev Tshawb Fawb los ntawm txhua qhov chaw hauv Network…

LINQ2 – Network Communication Module
LINQ2 muab cov chaw taws teeb IP nkag mus rau cov ntaub ntawv ntawm lub sijhawm tiag tiag los ntawm eFlow fais fab mov / chargers los pab ua kom lub tshuab nce thiab khiav ntawm qib siab. Nws ua kom yooj yim thiab yooj yim installation thiab teeb tsa, txo qis lub sijhawm poob qis, thiab tshem tawm cov kev pabcuam tsis tsim nyog, uas yuav pab txo qis Tus Nqi Tag Nrho Cov Tswv Cuab (TCO) - nrog rau tsim qhov tshiab ntawm Cov Nyiaj Tau Los Txhua Hli (RMR).

Nta:

- UL tau teev npe hauv Asmeskas thiab Canada.
- Hauv zos lossis chaw taws teeb tswj txog li (2) ob lub Altronix eFlow lub zog tso zis ntawm LAN thiab / lossis WAN.
- Saib xyuas lub sijhawm kuaj mob: DC tso zis voltage, tso zis tam sim no, AC & roj teeb raws li txoj cai / kev pab cuam, input trigger lub xeev hloov, tso zis lub xeev hloov thiab chav tsev kub.
- Kev tswj kev nkag mus thiab kev tswj cov neeg siv: txwv kev nyeem / sau, txwv cov neeg siv rau cov peev txheej tshwj xeeb
- Ob (2) ib qho kev sib koom tes tswj hwm Daim Ntawv "C" Relays.
- Peb (3) programmable input triggers: Tswj relays thiab cov khoom siv hluav taws xob los ntawm cov khoom siv sab nraud.
- Email thiab Windows Dashboard ceeb toom
- Txheej xwm txheej xwm taug qab keeb kwm.
- Kev Ruaj Ntseg Socket Layer (SSL).
- Programmable ntawm USB lossis web browser – suav nrog kev khiav hauj lwm software thiab 6 ft. USB cable.

LINQ2 Mounts Hauv ib qho Trove Enclosure

T1SAK3F4 Enclosure Dimensions (H x W x D):
18 "x 14.5" x 4.625" (457mm x 368mm x 118mm)

T2SAK7F8 thiab T2SAK75F12 Enclosure Dimensions (H x W x D):
27.25 "x 21.75" x 6.5" (692.15mm x 552.5mm x 165.1mm)

Altronix tsis yog lub luag haujlwm rau txhua qhov yuam kev typographical.
140 58th Street, Brooklyn, New York 11220 USA | xov tooj: 718-567-8181 Ib | fax: 718-567-9056 Ib
web qhov chaw: www.altronix.com | e-mail: yog info@altronix.com | Lub neej Warranty
IITrove SALTO Cov Khoom Siv J05U

Cov ntaub ntawv / Cov ntaub ntawv

Altronix T2SAK7F8 Trove Access thiab Power Integration [ua pdf] Daim ntawv qhia kev teeb tsa T2SAK7F8 Trove Access thiab Power Integration, T2SAK7F8, Trove Access thiab Power Integration, Access thiab Fais fab kev koom ua ke, Fais fab kev koom ua ke, kev koom ua ke

Cov ntaub ntawv

• Cov neeg siv phau ntawv