Tag nrho cov cuab yeej siv computer Ignition Hloov Module

Specifications

• Qauv: ISM-100
• Compatibility: Tag nrho cov tsheb nrog cov txheej txheem ignition systems
• Medidas: 3.5 x 2.0 x 1.2 cm
• Khoom siv: High-quality yas thiab hlau Cheebtsam
• Lub Zog Mov: 12V DC

Ignition Switch Module Installation

Instructions Tools Required

• Screwdrivers (Phillips thiab flat-head)
• Qhov (socket) set
• Trim tshem tawm cov cuab yeej

Cov kauj ruam installation

1. Ensure the vehicle is in park and the ignition is off.
2. Disconnect the negative battery terminal to prevent electrical issues.
3. Locate the Ignition Switch Module, usually behind the dashboard near the steering column.
4. Carefully remove the trim panel using a trim removal tool.
5. Unscrew or unclip the old Ignition Switch Module and disconnect all wiring harnesses.
6. Connect the wiring to the new Ignition Switch Module, ensuring a secure connection.
7. Position the module and secure it using the removed screws or clips.
8. Reattach the trim panel securely.
9. Rov qab txuas lub roj teeb tsis zoo.
10. Insert a FOBIK key into the ignition and start the vehicle.
11. Test both keys for functionality, including lock/unlock and remote start (if applicable).
12. Check for any warning lights and clear faults if necessary.

Kev ua haujlwm

The Ignition Switch Module enhances vehicle security by adding an extra layer of protection to the ignition system. It ensures that only authorized users can start the vehicle by requiring a specific key sequence or code.

Kev tu

Regularly inspect the wiring connections to ensure they are secure and free from damage. Clean the module exterior with a soft, damp daim ntaub los tuav nws cov tsos.

Kev daws teeb meem
Following these steps ensures proper installation and functionality of your Ignition Switch Module. If you encounter issues, please contact our support team for assistance at: allcomputerresources.com/support.html

FAQs

Q: Kuv puas tuaj yeem nruab Ignition Switch Module kuv tus kheej?
A: While installation requires basic knowledge of vehicle wiring, it is recommended to seek professional help for proper installation and setup.

Q: Puas yog Ignition Switch Module tau tshaj txhua lub tsheb qauv?
A: The module is compatible with most vehicles that have standard ignition systems. It is always best to check compatibility before purchase.

Cov ntaub ntawv / Cov ntaub ntawv

Tag nrho cov cuab yeej siv computer Ignition Hloov Module [ua pdf] Daim ntawv qhia kev teeb tsa Ignition Hloov Module, Ignition Hloov Module, Hloov Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv