Weymic A80 Professional Mixer

Taw qhia

Thank you for choosing the Weymic A80 Professional Mixer. This versatile audio mixer is designed for a wide range of applications, including recording, DJ performances, stage events, and karaoke. Featuring 99 built-in DSP effects, USB playback, Bluetooth connectivity, and 48V phantom power, the A80 provides a comprehensive solution for your audio mixing needs. This manual will guide you through the setup, operation, and maintenance of your new mixer.

Cov ntaub ntawv kev nyab xeeb

• Nyeem tag nrho cov lus qhia ua tib zoo ua ntej siv lub cuab yeej.
• Keep the mixer away from water or moisture.
• Tsis txhob thaiv qhov rooj qhib pa taws.
• Tsuas yog siv cov ntawv txuas / accessories uas tau teev tseg los ntawm cov chaw tsim khoom.
• Xa tag nrho cov kev pabcuam rau cov neeg ua haujlwm tsim nyog.
• Ensure proper grounding for all connected equipment.

Teeb Qhia

Follow these steps to set up your Weymic A80 mixer:

1. **Power Connection**: Connect the mixer to a suitable power source using the provided power adapter.
2. **Microphone/Line Inputs**:
   • Connect microphones to the XLR/TRS combo jacks (CH 1-4).
   • For condenser microphones requiring power, activate the +48V phantom power switch for the respective channel. Observe the indicator light.
   • Connect line-level instruments (keyboards, guitars with preamps) to the 1/4" TRS inputs.
3. **Stereo Inputs (CH 5-6, CH 7-8)**:
   • Use the L/Mono and Right 1/4" TRS jacks for stereo line-level sources.
   • CH 5-6 also features RCA inputs for additional stereo sources.
4. **Main Outputs**: Connect your main speakers or amplifier to the MAIN L and MAIN R XLR outputs.
5. **Headphone Output**: Connect headphones to the PHONES 1/4" jack for monitoring.
6. **USB Connection**: Connect the mixer to your computer via the USB port for recording or playback.
7. **Bluetooth Pairing**:
   • Activate Bluetooth mode on the mixer (refer to the operating section).
   • Nrhiav rau "Weymic A80" (or similar name) on your Bluetooth-enabled device and pair.

Cov lus qhia ua haujlwm

Channel Controls (CH 1-4)

• **GAIN**: Adjusts the input sensitivity for the channel. Set it so the SIG (signal) LED lights up consistently, but the PK (peak) LED only flashes occasionally during the loudest parts.
• **HIGH/LOW EQ**: Adjusts the treble and bass frequencies for tone shaping.
• **FX**: Controls the amount of signal sent to the DSP effects processor.
• **VOL**: Adjusts the channel's volume level in the main mix.

Stereo Channel Controls (CH 5-6, CH 7-8)

• **VOL**: Adjusts the volume level for the stereo channel.
• **EQ**: Provides basic tone control for the stereo input.

DSP Effects (99 Reverberation Effects)

• **DSP MODE**: Use the "Rotate select / Press set" knob to browse through the 99 available DSP effects. Press the knob to confirm your selection.
• **DSP EFX VOL**: Adjusts the overall volume of the selected effect.
• **Effect List**: The mixer includes a variety of effects such as KTV Echo, Delay, Flanger, Chorus, Room, Plate, Gate, Reverb, and more. A detailed list is often printed on the mixer panel for quick reference.

USB/MP3 Player Function

• **USB Drive Playback**: Insert a USB drive containing MP3 files into the USB port. The mixer will automatically detect and begin playback. Use the transport controls (Play/Pause, Next, Previous) to navigate.
• **Computer Input/Recording**: Connect the mixer to your computer via USB. The mixer will function as an audio interface, allowing you to play audio from your computer through the mixer or record the mixer's output to your computer.

Bluetooth Rov Ua Si

• Once paired, select the Bluetooth input on the mixer (usually labeled "BT PLAYER") and adjust its volume.

Main Output and Monitoring

• **MAIN OUT**: Adjust the MAIN OUT fader to control the overall volume of the mix sent to your main speakers.
• **PHONES**: Adjust the PHONES volume knob to control the headphone output level.

Kev tu

• **Cleaning**: Use a soft, dry cloth to clean the exterior of the mixer. Avoid using liquid cleaners or solvents.
• **Storage**: Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
• **Dust Protection**: When not in use, cover the mixer to prevent dust accumulation, which can affect faders and knobs.
• **Cable Management**: Ensure cables are not kinked or strained to prevent damage to connectors and internal wiring.

Kev daws teeb meem

Specifications

Cov Lus Qhia Txog Tus Neeg Siv

• **Gain Staging**: Always set your input gain (GAIN knob) correctly to avoid clipping (distortion) and ensure a strong, clear signal. The SIG LED should light up, and the PK LED should only flash on the loudest peaks.
• **Effect Experimentation**: With 99 DSP effects, take time to experiment with different reverbs, delays, and modulations to find the perfect sound for your vocals or instruments.
• **Monitoring**: Use headphones to monitor your mix closely, especially when setting effects or adjusting EQ, to catch subtle details that might be missed through main speakers.
• **Cable Quality**: Invest in good quality cables. Poor cables can introduce noise or signal loss.
• **Phantom Power**: Only activate +48V phantom power for condenser microphones that require it. Dynamic microphones do not need phantom power and can be damaged if it's applied incorrectly.

Warranty thiab Support

Rau cov ntaub ntawv pov thawj, kev txhawb nqa, lossis kev nug txog kev pabcuam, thov hu rau koj lub khw muag khoom lossis cov chaw tsim khoom ncaj qha. Khaws koj daim ntawv yuav khoom ua pov thawj ntawm kev yuav khoom.