Txib Vajtage Tswj NANO XL Microprocessor-Based Controllers

Specifications

• Khoom npe: NAS XL
• Hom: Microprocessor-based maub los
• Tsim los rau: Recirculating dej kho tshuab
• Tswj Kev Ua Haujlwm: Conductivity xyuas thiab tswj, ntxiv cov tshuaj, relay tso zis activation

Cov lus qhia siv khoom

Kev teeb tsa

Ua raws li cov kauj ruam tau teev tseg hauv ntu Kev teeb tsa ntawm phau ntawv los teeb tsa NANO XL maub los hauv koj qhov kev kho dej.

Kev teeb tsa

Siv lub hauv ntej vaj huam sib luag keypad los teeb tsa tus maub los raws li koj qhov kev thov tshwj xeeb xav tau. Xa mus rau lub Model Numbering lub rooj los txiav txim cov haujlwm thiab cov yam ntxwv ntawm koj chav tsev.

Conductivity Tswj

NANO XL tso cai rau kev saib xyuas kev coj ua thiab kev tswj hwm ntawm Total Dissolved Solids (TDS) hauv cov dej rov ua haujlwm. Xaiv qhov ntsuas ntsuas ntawm qhov qis, nruab nrab, lossis siab ntau hauv Configure menu.

Pub Timer Programming

Program peb lub sijhawm xaiv tau rau ntau yam haujlwm xws li tshuaj ntxiv lossis ua kom lub cuab yeej siv. Txhua timer tuaj yeem kho tus kheej raws li koj xav tau.

FAQ

Q: Kuv tuaj yeem txiav txim siab li cas ntawm kuv NANO XL chav tsev?

A: Txheeb xyuas tus qauv naj npawb daim ntawv lo nyob rau ntawm tus maub los enclosure txhawm rau txheeb xyuas lub hauv paus tswj kev ua haujlwm thiab xaiv cov yam ntxwv muaj nyob hauv koj chav tsev.

Q: Lub hom phiaj ntawm kev tswj xyuas cov dej hauv cov dej kho yog dab tsi?

A: Conductivity tswj pab saib xyuas thiab tswj cov qib ntawm Total Dissolved Solids (TDS) nyob rau hauv cov dej recirculating, xyuas kom zoo dej zoo.

Taw qhia

• NANO XL microprocessor-based controllers yog tsim los muab ntau yam kev tswj hwm kev ua haujlwm rau kev kho dej rov ua haujlwm.
• Tus maub los yog programmed los ntawm lub vaj huam sib luag hauv pem hauv ntej thiab tuaj yeem teeb tsa los muab kev tswj hwm tus kheej rau koj daim ntawv thov.
• Koj qhov kev ua haujlwm tshwj xeeb tuaj yeem txiav txim siab los ntawm kev sib piv chav tsev tus qauv naj npawb rau Model Numbering cov lus teev hauv qab no.

Qauv Zauv

• NanoTron units muaj ob peb lub hauv paus tswj kev ua haujlwm thiab chav nyob yeem xaiv. Koj chav nyob yuav muab tau nrog ib lossis ntau dua ntawm cov yam ntxwv tau piav qhia hauv phau ntawv no.
• Txhawm rau txiav txim siab seb yam ntxwv twg siv rau koj chav kuaj xyuas tus qauv naj npawb daim ntawv lo nyob rau ntawm lub kaw lus tswj.

Base Control muaj nuj nqi

• B2 - Boiler Conductivity thiab 3 Pub Timers
• C - Ntauwd Conductivity thiab 3 Pub Timers
• F4 - Plaub Xaiv Pub Timers

Tag Nrho Cov Txheej Txheem Xaiv

• A - Cov kab txuas txuas
• A3 - Cov khoom siv nrog CE
• E - Flow Hloov

Kev piav qhia

• NanoTron units yog tsim los automate conductivity tswj thiab / los yog ntxiv ntawm ntau yam tshuaj los yog qhib lwm yam khoom siv los ntawm ib tug relay tso zis.
• Txhua relay tuaj yeem muaj nws txoj haujlwm ua kom xaiv los ntawm cov khoom siv analog, timers, tswb, lossis khoom siv.

NANOXL-C thiab NANOXL-B2 units suav nrog:

• Ob qhov kev ntsuas dej tag nrho tuaj yeem tsim kho rau kev sib cuag lub taub hau lossis lub ntsuas ntsuas qhov cuam tshuam.
• Peb cov tswv yim digital uas tuaj yeem teeb tsa kom tsis txhob muaj qhov tso tawm relay.
• Plaub tus neeg kho tshuab relay outputs nrog ib txwm qhib thiab ib txwm kaw cov neeg tuaj yeem raug teeb tsa rau kev siv hluav taws xob lossis kev sib cuag qhuav.
• Conductivity Control (C & B) - Kev saib xyuas kev coj ua thiab kev tswj hwm ntawm Tag Nrho Cov Khoom Siv Hluav Taws Xob (TDS) hauv cov tshuab dej rov ua haujlwm raws li kev ntsuas hluav taws xob ntsuas hauv MicroSiemens / cm.
• Kev ntsuas ntsuas tuaj yeem xaiv tau los ntawm peb thaj tsam (qis, nruab nrab, thiab siab) hauv Configure menu (saib nplooj 12). Kev xaiv pub timers kuj suav nrog (saib timer piav qhia hauv qab).
• Pub Timer - Peb lub sijhawm xaiv tau uas tuaj yeem tsim kho tus kheej raws li ib qho ntawm cov hauv qab no:
  1. Pulse Timer - Txais cov pulses qhuav los ntawm lub ntsuas dej (muab cais). Nws tuaj yeem sau 1- 9999 pulses los qhib lub sijhawm kom khiav ntawm 0-99 feeb, 59 vib nas this hauv feeb thiab vib nas this. Lub timer yuav khaws txog li 5 qhov kev ua haujlwm ntxiv thaum lub sijhawm ua haujlwm ntawm tus kheej.
  2. Recycle Timer - Muab lub voj voog "tawm" rau cov neeg siv hauv HH: MM thiab tus neeg siv tau txhais "rau" lub voj voog hauv MM: SS uas rov ua dua tas li.
  3. 28-DayTimer - 28-hnub pub timers, feem ntau yog siv rau biocide pub yog raws li lub voj voog 28-hnub nrog ob lub sijhawm pub noj ywj pheej pub rau pub rau hnub xaiv thiab lub lis piam.
  4. Post Bleed Timer - Lub relay yog qhib tom qab lub voj voog los ntshav thiab khiav rau qhov teeb tsa percentage ntawm lub voj voog los ntshav.
  5. Nrog Bleed Timer - Ua kom lub relay tso zis ib txhij nrog cov ntshav thiab txwv lub sij hawm lub relay output yuav nyob rau lub sij hawm los ntshav.
  6. Kev siv hluav taws xob - Relay ib txwm nyob
  7. Tswb - Relay nrog lub tswb

Npaj siv

• NanoXL yog microprocessor-based ntsuas thiab tswj cov cuab yeej siv los ntsuas cov dej tsis zoo thiab lwm yam txheej txheem hloov pauv hauv ntau hom kev siv dej thiab dej khib nyiab.
• Kev khiav hauj lwm cov cuab yeej hauv txhua txoj kev uas tsis yog raws li tau piav qhia hauv cov lus qhia no tuaj yeem cuam tshuam kev nyab xeeb thiab kev ua haujlwm ntawm lub ntsuas ntsuas thiab yog li tsis muaj cai.
• Kev sib txuas hluav taws xob ua haujlwm thiab kev saib xyuas tsuas yog ua los ntawm cov neeg ua haujlwm tsim nyog. Cov chaw tsim khoom tsis muaj lub luag haujlwm rau kev puas tsuaj los ntawm kev siv tsis raug lossis tsis tsim nyog.

Mechanical Specifications

Cov ntaub ntawv enclosure	(ABS) "Polylac"
Npog	UL ntsuas ntawm 94V-0. Heavy luag hauj lwm, muaj kev cuam tshuam siab thermoplastic nrog ncoo-lockable gasketed Lexan viewhauv qhov rooj.
Qhov ntev	W 7.5" (19.05 cm) x H 7.5" (19.05 cm) x D 5.875" (14.923 cm)
Ua haujlwm Ambient Temp	0 ° txog 125 ° F (-17 txog 52 ° C)
Cia Kub	-4 - 176 ° F (-20 - 80 ° C)
Cov av noo	10-90% tsis-condensing
Kev ua qias tuaj	2
Overvoltage Qeb	II
Qhov siab	2000 m (6560 ft) siab tshaj plaws
Relays	2.5 amp rau relay

Icon txhais

Kev teeb tsa

A. Cov Lus Qhia Hluav Taws Xob

• Tus maub los muaj cov khoom siv hluav taws xob sab hauv uas yuav ua haujlwm nyob rau hauv thaj tsam li ntawm 100 txog 240 VAC ntawm cov xaim tuaj. Output relay(s) tiv thaiv nrog lub fuse hloov tau. Relay tso zis voltage yuav sib npaug ntawm cov kab nkag voltage.
• Koj tus maub los yuav tuaj txog ntawm lub Hoobkas prewired los yog npaj rau hardwiring. Nyob ntawm koj qhov kev teeb tsa ntawm cov kev xaiv tswj hwm, koj yuav raug yuam kom hardwire qee lossis tag nrho cov khoom siv nkag / tawm. Xa mus rau seem logic thiab relay daim npav thaiv.
• Nco tseg: Thaum xaim qhov kev xaiv qhov ntsuas dej ntws tawm ntawm tus contactor input, 4-20 mA outputs, los yog tej thaj chaw deb khiav mus, nws yog advisable siv stranded, twisted, shielded khub hlau ntawm 22-26 AWG.
• Cov ntaub thaiv npog yuav tsum raug txiav tawm ntawm tus maub los ntawm qhov yooj yim tshaj plaws daim ntaub thaiv lub davhlau ya nyob twg.
• Cov chav nyob ua ntej tau muab nrog 16 AWG cable nrog 3-xaim hauv av USA 120-volt ntsaws rau lub zog tuaj thiab 18 AWG 3-xaim grounded receptacle cords rau tag nrho cov tswj relay outputs.
• Conduit units yog muab nrog cov kua tights thiab adapters rau ib qho yooj yim zog xaim rau cov khoom connector.

CEEB TOOM
1.	Muaj cov kab hluav taws xob nyob hauv tus maub los txawm tias lub hwj chim hloov ntawm lub vaj huam sib luag pem hauv ntej nyob rau hauv OFF txoj hauj lwm! Lub vaj huam sib luag pem hauv ntej yuav tsum tsis txhob qhib ua ntej lub hwj chim rau tus maub los raug tshem tawm! Yog tias koj tus maub los yog prewired, nws tau muab nrog 8-ko taw, 18 AWG fais fab qaum nrog lub teb chaws USA-style plug. Ib lub cuab yeej (#1 Phillips tsav tsheb) yuav tsum qhib lub vaj huam sib luag pem hauv ntej.
2.	Tsawg voltage teeb liab xov hlau (probes, flow switches, water meters, etc.) yuav tsum tsis txhob khiav hauv conduits nrog high vol.tage (zoo li 115VAC) xov hlau.
3.	Tsis txhob sim tsaws kev sib txuas rau tus maub los yam tsis tau txiav lub hwj chim ntawm lub qhov hluav taws xob thawj zaug.
4.	Tsis txhob thaiv kev nkag mus rau disconnect fais fab thaum mounting thiab installation.
5.	Kev teeb tsa hluav taws xob ntawm tus maub los yuav tsum tau ua los ntawm cov neeg ua haujlwm tau txais kev cob qhia nkaus xwb thiab ua raws li tag nrho cov cai siv hauv Tebchaws, Xeev, thiab hauv zos!
6.	Kev cog qoob loo ntawm cov khoom no yog tsim nyog. Cov maub los yuav tsum tau txuas nrog nws qhov kev sib cais ntawm cov hluav taws xob hluav taws xob, thiab kom tau txais txiaj ntsig zoo tshaj plaws, cov av yuav tsum yog lub ntiaj teb tiag tiag, tsis yog sib koom. Ib qho kev sim hla lub hauv paus yuav cuam tshuam kev nyab xeeb ntawm tib neeg thiab khoom.
7.	Kev ua haujlwm ntawm cov khoom no raws li qhov tsis tau teev tseg los ntawm cov chaw tsim khoom tuaj yeem cuam tshuam kev tiv thaiv los ntawm cov khoom siv.
8.	Tsuas yog lub hwj chim ntaus ntawv nrog lub hau ntsia. Tsis txhob khiav lub cuab yeej nrog lub hau tshem tawm.

Lus Cim Ntxiv:

1. Cov kua nplaum nruj thiab qee cov ntawv cim npe ua rau cov teeb liab (tsawg voltage) kev sib txuas, xws li cov ntsuas dej nkag.
2. Hall effect metres uas xav tau +12 VDC yuav tsum siv lub zog hluav taws xob sab nraud (TFS-PWR).
3. Kev xaiv 4-20mA ouput yog tsim nrog 12 VDC ntawm lub voj voog. Tsis txhob txuas cov zis rau cov khoom siv uas sim ua kom lub zog lub voj.

Mounting Location Information

1. Xaiv qhov chaw mounting uas muab tus neeg teb xov tooj nkag tau yooj yim rau chav tsev thiab pom meej view ntawm cov tswj los ntawm lub hau ntawm tus maub los. Qhov chaw yuav tsum yooj yim rau hauv av sib txuas hluav taws xob, thiab qhov xav tau sample kab kav dej, thiab nyob rau ntawm qhov chaw ruaj khov.
2. Tsis txhob thaiv kev nkag mus rau disconnect fais fab thaum mounting thiab installation.
3. Tsis txhob mounting nyob rau hauv qhov chaw uas tso cai rau tus maub los rau lub hnub ncaj qha tshav ntuj, vapors, kev co, kua spills, los yog huab cua kub; Tsawg dua 0 ° F (-17.8 ° C) lossis siab dua 120 ° F (50 ° C). EMI (electromagnetic cuam tshuam) los ntawm kev xa xov tooj cua thiab lub tshuab hluav taws xob tuaj yeem ua rau muaj kev puas tsuaj lossis cuam tshuam thiab yuav tsum zam.
4. Qhov tsawg kawg nkaus ntsia hlau / ntsia liaj qhov rooj loj yog #8 lossis loj dua.

Logic thiab Relay Cards

Nano XL-C Logic Card

Electrode Installation

• Cov tswj tau tuaj yeem teeb tsa rau ntau lub tshuab dej ntws. Cov npe hauv qab no yog cov lus qhia rau kev ua kom txias ntauwd thiab boiler raug teeb tsa.
• Koj qhov kev xav tau tshwj xeeb rau kev teeb tsa yuav txawv tab sis yuav tsum ua raws li cov lus qhia no ntau li ntau tau rau kev ua haujlwm kom raug.

A. Txias Ntauwd

• Cov txheej txheem sojntsuam thiab / lossis kev sib dhos ua kom txias ntauwd yog tsim los ntawm lub sijhawm 80 PVC thiab muab nrog 3/4 "slip fittings rau kev teeb tsa raws liample kab.
• Txhawm rau kom ua haujlwm tau zoo, sample kab yuav tsum muaj tus nqi ntws ntawm 3-10 gpm.
• Inlet siab yuav tsum siab tshaj qhov hluav taws xob siab rau cov dej ntws dhau los ntawm electrode (s) kom ua tiav qhov yuav tsum tau ua.
• Cov kev sojntsuam yog qhov kub-paub rau qhov tseeb.

Nco tseg:

1. Nruab ib qho kev sib cais valve ntawm ob sab ntawm cov dej sib dhos kom cov electrodes tuaj yeem raug cais tawm yooj yim rau kev tshem tawm thiab ntxuav.
2. Ib txoj kab strainer raug pom zoo los ntawm kev sojntsuam los tiv thaiv fouling thiab kev puas tsuaj.
3. Cov kab ke nrog kev hloov pauv yuav tsum muaj 2-3 gpm ntws tus nqi los ua haujlwm tawm.

CEEB TOOM:

1. Electrodes yog O-ring kaw, uas yog kev puas tsuaj yuav ua rau kom tawg.
2. Tsis txhob cia cov lus qhia pH sensor kom qhuav, kev puas tsuaj yuav tshwm sim.
3. Tsis txhob tshaj dej kub ntawm 32 ° F txog 140 ° F.
4. Tsis txhob siab tshaj qhov siab tshaj plaws ntawm 150 psi.

Hom Txias Ntauwd Installation Diagram

B. Boiler

• Standard boiler electrodes muaj MNPT stainless hlau bushing thiab tau muab nrog FNPT ntoo khaub lig tsim los rau mounting nyob rau hauv lub skimmer (nto) blowdown kab.
• Sampling ntawm boiler dej tuaj yeem ua tiav siv ib qho ntawm ob qhov kev teeb tsa cov kav dej (nruam sampling los yog sij hawm thiab/los yog tuav sampling) ib.
• Rau kev txhim kho kom tiav, nws yog ib qho tseem ceeb kom ua raws li qhov kev pom zoo nyob deb thiab qhov ntau thiab tsawg ntawm cov yeeb nkab uas tau muab hauv cov duab kos.
• Txhawm rau kom tau txais txiaj ntsig zoo tshaj plaws, tus ntoo khaub lig electrode yuav tsum tau muab tso rau hauv 1 "skimmer blowdown kab hauv 4" ntawm lub boiler. Cov kab me me thiab qhov sib nrug ntau dua tuaj yeem cuam tshuam rau lub sijhawm teb thiab qhov tseeb ntawm electrode.
• Ib lub tshuab nqus dej ntws ntws los ntawm qhov kev sojntsuam (hauv 24 ntiv tes) yuav tsum tau ua kom ntseeg tau tias cov electrode raug dej thiab tsis yog chav dej.
• Txhim kho thiab kho kom raug, cov cuab yeej no yuav tiv thaiv tsis tau flashing nyob rau hauv lub electrode chamber.

Nco tseg:

1. Nruab ib lub siab ported valve ntawm lub electrode thiab lub boiler. Qhov no tso cai rau cov electrode cais tawm kom tshem tawm thiab ntxuav.
2. Ib txoj kab dej ntws tawm thiab 1/4 tig hom pob valve yuav tsum tau muab tso rau hauv qab ntawm tus ntoo khaub lig mus rau ntu "flush" sediment los ntawm electrode chamber.
3. Xyuas kom cov xib xub sib dhos ntawm qhov kev sojntsuam xaus mus rau qhov sib npaug rau qhov ntws kom ua tau zoo tshaj plaws.

CEEB TOOM:

1. Kev sojntsuam yuav tsum tau muab tso rau hauv lub cev dej kom nyeem kom raug.
   • Chav flashing yuav ua rau kev nyeem ntawv tsis raug.
2. Tsis txhob siab tshaj dej kub ntawm 436 ° F (224 ° C)
3. Tsis txhob siab tshaj qhov siab tshaj plaws ntawm 350 psi (24.1 bar)
4. Ib tug throttling ntaus ntawv yuav tsum tau ntsia downstream ntawm lub electrode.

Boiler Conductivity Electrodes

Lus Cim: BE-32 probes xav tau ib tug (2) conductor cable los ntawm tus maub los mus soj ntsuam. Cov (2) xov hlau txuas ntawm (2) cov ntsiab lus conductivity (R & B) raws li qhia.

Hom Nruam Sampling Boiler Installation Diagrams

CEEB TOOM - Tsis txhob siv ntawm cov kab hauv qab, tsuas yog cov kab nrib pleb los yog ntog!

Lub Sijhawm Teev Taw Sampling thiab Sample thiab Tuav Boiler Installation

CEEB TOOM - Tsis txhob siv ntawm cov kab hauv qab, tsuas yog cov kab nrib pleb los yog ntog!

Pem hauv ntej vaj huam sib luag Description

Kev ua haujlwm dhau lawmview

Kev piav qhia ntawm Menus

• NANOXL controllers muaj ob hom kev ua haujlwm, Khiav thiab Ntawv Qhia. Tag nrho cov zaub mov yog ncig. Nias tus yuam sij DOWN yuav tso saib kab ntawv txuas ntxiv ntawm cov zaub.
• Khiav - Hom no yog rau kev ua haujlwm ib txwm muaj. Hauv Khiav hom, cov zaub yuav nyeem qhov system qhov tseem ceeb. Yog hais tias muaj lub tswb, cov zaub flashes nrog lub tswb raws li txoj cai.
• Cov ntawv qhia ua haujlwm yuav pom qhov muaj nuj nqis xws li hnub, sijhawm, hnub tim, thiab lwm yam txiaj ntsig nyob ntawm cov yam ntxwv tam sim no ntawm chav tsev. Chav tsev yuav cia li rov qab mus rau Khiav hom yog tias tsis muaj cov yuam sij raug nias rau peb feeb.
• Ntawv qhia zaub mov - Hom no yog siv los hloov kho rau qhov chaw thiab nyeem ntawm tus maub los. Txhawm rau nkag mus rau hom ntawv qhia zaub mov los ntawm lub vijtsam khiav, nias lub Menu key.
• Siv lub xub nce los yog nqis mus rau hauv cov ntawv qhia zaub mov. Thaum koj xav nkag mus rau cov ntawv qhia zaub mov tshwj xeeb, nias Enter.
• Thaum koj tau nkag mus rau sub-menu koj yuav muaj peev xwm los ntawm cov ntawv qhia zaub mov cov kev xaiv nrog lub nce lossis nqis xub thawj.

Kev coj ua SampLing Methods

• A. Nruam - Ib txwm siv rau ntau daim ntawv thov ntauwd. Tus maub los tas li nyeem cov sensor thiab ua kom cov ntshav relay raws li kev nyeem ntawv kev sib raug zoo rau lub teeb taw tes, teeb taw tes taw qhia, thiab qhov sib txawv.
• Example: Ib qho kev nce siab ntawm 1500 thiab qhov sib txawv ntawm 50 qhov kev xa tawm los ntshav yuav qhib thaum lub conductivity nce siab tshaj 1500 thiab nyob twj ywm kom txog thaum kev nyeem ntawv poob mus rau 1450.
• B. Sijhawm Sampling -A sample timer tso cai rau cov conductivity yog sampcoj nyob rau hauv lub sij hawm luv luv.
• Sample intervals yog adjustable los ntawm 1 feeb mus rau 9 teev, 59 min. Sample ntev (raws sijhawm) yog kho tau los ntawm 1 thib ob mus rau 99 feeb, 59 vib nas this. Yog tias qhov kev nyeem ntawv qis dua qhov teeb tsa los ntawm qhov sib txawv ntawm cov ntshav relay yuav raug muab tua thaum kawg ntawm sample duration and samplub sij hawm countdown reinitiated. Yog tias qhov kev nyeem ntawv siab tshaj qhov teeb tsa ntawm qhov kawg ntawm sample txoj kev los ntshav relay nyob twj ywm kom txog rau thaum qhov kev nyeem ntawv poob los ntawm tus nqi sib txawv.
• C. Sample thiab Hold - Kuj tseem siv liample timer rau periodic samplub sij hawm. Unit yuav sample rau nws lub sijhawm thiab tom qab ntawd tuav lub blowdown valve kaw rau lub sijhawm teem sijhawm (tuav lub sijhawm). Cov conductivity raug kuaj xyuas thaum kawg ntawm lub sijhawm tuav, yog tias yuav tsum tau tshuab blowdown ntxiv rau lub tshuab nqus tsev yog qhib rau lub sijhawm teem sijhawm (lub sijhawm tshuab). Ces sample lub voj voog rov qab mus txog thaum qhov kev nyeem ntawv qis dua qhov teeb tsa ntawm qhov kawg ntawm lub voj voog tuav thiab samplub sij hawm countdown yog reinitiated.
• Nco tseg: Sijhawm Sampling thiab Sample thiab Hold feem ntau yog siv rau kev siv boiler tab sis Timed sampling kuj tseem siv tau rau ntawm cov yees me me. Ntawm cov ntawv thov ntauwd, qhov kev sojntsuam raug teeb tsa rau hauv txoj kab ntshav ua ntej cov ntshav valve.

Calibration Tshajview

• NanoTron controllers hloov kho cov kev nyeem ntawv txhua ob vib nas this nrog qhov nruab nrab khiav. Nanotron tus maub los qhov ntsuas ntsuas yuav tsum raug xaiv kom qhov ntsuas qhov ntsuas tau ze li qhov ua tau mus rau nruab nrab ntawm qhov ntsuas. (Saib nplooj 12 cov ntawv qhia zaub mov rau qhov teev teev).
• Nco tseg: Yog tias tus maub los siv sijhawm Sampling sau Sampling thiab Tuav txoj hauv kev tswj cov kev nyeem ntawv qhia hauv RUN hom yuav tsis yog kev nyeem tam sim no. Tus maub los yuav tuav thiab tso saib tus nqi conductivity pom thaum kawg ntawm sample los yog tuav lub sijhawm. Txhawm rau pom lub zog nyeem tam sim no ntawm cov ntshav relay nrog lub zog khawm lossis ntawm cov ntawv qhia zaub mov Calibration.
• A. Nruam - Calibrating nruam sampling units tuaj yeem ua tiav txhua lub sijhawm nrog kev sojntsuam hauv cov dej tsis tu ncua uas tsis muaj cua lossis chav nyob.
  B. Sijhawm Sampling - Thaum nyob rau hauv cov ntawv qhia zaub mov calibration, muaj kev xaiv los yuam cov ntshav relay. Nws yuav yuam nws mus rau hauv samplub sijhawm. Tom qab 1-2 feeb txheeb xyuas qhov kev nyeem ntawv ruaj khov ces nkag mus rau qhov xav tau calibration tus nqi.
• C. Sample thiab Hold - Thaum nyob rau hauv cov txiv neej calibration, muaj kev xaiv los quab yuam ntawm cov ntshav relay. Nws yuav yuam kom lub tsev nyob rau hauv nws sample thiab tuav lub sij hawm thiab calibration yuav tsum tau ua thaum lub sij hawm tuav tom qab ib tug tshiab sample.

Nco tseg:

1. Yog hais tias chav tsev yog flashing ntawm boiler probes kev nyeem ntawv ruaj khov yuav tsis raug tswj xyuas thiab tus maub los yuav tsis taug qab.
2. Recalibration yuav tsum tau yog tias qhov ntsuas tau hloov pauv hauv Configure menu.

Kev tu

• Qhov tsuas yog yuav tsum tau saib xyuas rau kev ua haujlwm tsis muaj kev cuam tshuam ntawm koj tus maub los yog kev tu cov electrode. Tom qab pib pib, nws yog ib lub tswv yim zoo los ntxuav cov electrode ntau zaus kom txog thaum lub sij hawm raws li qhov xav tau tau tsim.
• Txij li txhua daim ntawv thov yog qhov tshwj xeeb, nws yog qhov nyuaj rau kwv yees qhov xav tau ntawm kev ntxuav. Thawj qhov kev ntxuav yuav tsum tshwm sim tom qab li ntawm ib lub lim tiam ntawm qhov system hauv online.
• Txhawm rau txiav txim siab qhov yuav tsum tau tu ntau zaus, sau cov ntawv nyeem ntawm tus maub los ua ntej cov electrode raug tshem tawm los ntxuav. Tom qab ntxuav, sau cov ntawv nyeem tshiab.
• Yog tias qhov kev hloov pauv tau pom hauv ob qhov kev nyeem ntawv, lub electrode yog qias neeg. Qhov tseem ceeb tshaj qhov kev hloov pauv, qhov qias neeg lub electrode. Yog tias tsis muaj kev hloov pauv, kev tu yuav tsum tau ua tsawg dua.

Conductivity Electrode Cleaning txheej txheem

1. Sau cov ntawv nyeem tam sim no.
2. Tshem tawm cov dej ntws los ntawm lub voj electrode, los ntshav los ntawm txoj kab, thiab tshem tawm cov electrode.
3. Siv daim ntaub huv si thiab tshuaj ntxuav me me kom tshem tawm cov av xoob thiab lwm yam, los ntawm qhov chaw tiaj tus ntawm cov electrode.
4. Yog hais tias lub electrode muaj deposits xws li nplai txuas rau ntawm lub electrode nto yuav tsum muaj kev tu kom nruj dua. Muaj ntau ntau txoj hauv kev los ua qhov no, txoj kev nyiam yog qhov uas yooj yim tshaj rau cov neeg siv.
   • a. Siv cov kua qaub me me kom yaj cov deposits.
     b. Tso ib daim ntawv xuab zeb (200 grit lossis finer) rau ntawm qhov chaw tiaj tus xws li lub rooj zaum. "Xuab zeb" electrode kom tshem tawm cov tawv tawv. (Tsis txhob so qhov chaw nrog koj tus ntiv tes.) Roj los ntawm koj daim tawv nqaij yuav foul carbon tswv yim.
5. Reinstall lub electrode nyob rau hauv lub system. Tom qab nyeem ntawv stabilizes, calibrate chav tsev mus rau ib tug txhim khu kev qha kev nyeem ntawv.
   • Ntau zaus cov electrode tuaj yeem tshwm sim kom huv, tab sis chav tsev tseem tsis tuaj yeem ntsuas tau. Yog tias qhov no yog qhov teeb meem, siv ib qho ntawm cov txheej txheem ntxuav hluav taws xob nruj dua uas tau teev tseg hauv qib 4 saum toj no.
   • Rov xyuas qhov calibration tom qab ua tiav cov txheej txheem no. Yog tias tsis muaj kev hloov pauv hauv kev nyeem ntawv, hloov cov electrode. Yog tias qhov kev hloov pauv tshwm sim tab sis chav tsev tseem yuav tsis ntsuas, rov ua cov txheej txheem ntau zaus raws li qhov tsim nyog.

Kev daws teeb meem

• Lub Advantage NanoTron maub los yog tsim los rau ntau xyoo ntawm kev ua haujlwm tsis muaj teeb meem. Yog tias muaj teeb meem tshwm sim, xa mus rau daim ntawv qhia nram qab no los pab txheeb xyuas qhov teeb meem.
• Yog tias yuav tsum tau hloov pauv, ua raws li cov txheej txheem teev tseg hauv Warranty and Factory Service feem ntawm phau ntawv no.

PHEM POSSIBLE CAUSE SOLUTION

• False reading………………………………………. Tsis zoo los yog qias neeg electrode Ntxuav, raws li xav tau
  • Tawm ntawm calibration Calibrate unit
• Yuav tsis calibrate ………………………….. Dirty electrode Huv electrode
  • Faulty electrode Hloov electrode yog xav tau
  • Faulty wiring to electrode Hloov cov xaim yog xav tau
• Tsis muaj zog system ………………………………. Xyuas lub hwj chim qhov ntsaws rau hauv ib lub receptacle sib txawv
  • Kos fuse Hloov raws li xav tau
  • Txheeb xyuas cov kev sib txuas Xyuas kom paub tseeb tias cov ribbon cables ruaj ntseg
• Pulse timer tsis ua haujlwm …………………. Txheeb xyuas cov kab hluav taws xob Kho raws li xav tau
  • Xyuas cov cuab yeej sab nraud Kho/hloov raws li xav tau
• Outputs tsis energized.…………………. Tsis muaj Flow Check sample kab rau txhaws cov kav dej los yog cov lim dej
  • Kos fuse Hloov raws li xav tau

Warranty

Chaw tsim tshuaj paus khoom Warranty

• Txib Vajtage Tswj kev lav phib xaub ntawm nws qhov chaw tsim khoom kom tsis muaj qhov tsis xws luag hauv cov khoom lossis kev ua haujlwm. Kev lav phib xaub raws li txoj cai no txuas ntxiv rau 24 lub hlis txij li hnub teeb tsa. Kev lav phib xaub yog txwv rau kev kho lossis hloov cov cuab yeej ua tsis tiav lossis ib feem uas muaj pov thawj tsis raug ntawm cov khoom lossis kev ua haujlwm thaum lub chaw tsim khoom kuaj xyuas. Cov nqi tshem tawm thiab kev teeb tsa tsis suav nrog hauv qhov kev lees paub no. Lub tuam txhab kev lav phib xaub yuav tsum tsis txhob tshaj tus nqi muag ntawm cov cuab yeej lossis ib feem ntawm cov lus nug.
• Txib Vajtage tsis lees paub txhua qhov kev lav phib xaub rau kev puas tsuaj los ntawm nws cov khoom los ntawm kev teeb tsa tsis raug, kev saib xyuas, siv, lossis sim ua cov khoom lag luam tshaj li lawv qhov kev xav tau, txhob txwm los yog lwm yam, lossis kev kho tsis raug cai.
• Txib Vajtage tsis yog lub luag haujlwm rau kev puas tsuaj, kev raug mob, lossis cov nuj nqis uas tshwm sim los ntawm kev siv nws cov khoom.
• Lub warranty saum toj no yog nyob rau hauv qhov chaw ntawm lwm yam warranties, txawm hais los yog implied. Tsis muaj tus neeg sawv cev ntawm peb tus kheej raug tso cai los muab kev lav phib xaub uas tsis yog cov saum toj no.

30-Hnub Them Nqi Memo Txoj Cai

• Txib Vajtage Tswj tswj tuav lub koom haum sib pauv hloov pauv tshwj xeeb kom ntseeg tau tias tsis muaj kev cuam tshuam nrog lub sijhawm poob qis. Yog tias koj lub tsev ua haujlwm tsis zoo, hu rau 1-800-743-7431 Ib thiab muab peb cov kws tshaj lij nrog cov ntaub ntawv Model thiab Serial Number.
• Yog tias peb tsis tuaj yeem kuaj xyuas thiab daws koj qhov teeb meem hauv xov tooj, chav hloov pauv tau lees paub tag nrho yuav raug xa tuaj, feem ntau hauv 48 teev, ntawm 30 Hnub Them Nqi Memo.
• Qhov kev pabcuam no yuav tsum muaj daim ntawv xaj yuav khoom thiab chav hloov pauv yuav raug xa mus rau koj tus as-qhauj li niaj zaus rau kev them nyiaj.
• Cov chav hloov pauv yuav raug them nqi ntawm daim ntawv teev npe tam sim no rau tus qauv ntawd tsawg dua qhov muaj feem cuam tshuam txog kev muag khoom. Thaum rov qab los ntawm koj lub tsev qub, credit yuav raug muab rau koj tus as-qhauj yog tias lub tsev nyob hauv warranty. Yog tias chav tsev tsis muaj kev lav phib xaub lossis qhov kev puas tsuaj tsis raug them, ib feem credit yuav raug siv raws li lub sijhawm hloov pauv tus nqi nyob ntawm lub hnub nyoog ntawm chav tsev. Txhua qhov kev sib pauv tsuas yog siv los ntawm tus tswj lossis lub twj tso kua mis. Electrodes, kua kawg Cheebtsam, thiab lwm yam khoom siv sab nraud tsis suav nrog.

FCC ceeb toom

Cov cuab yeej no tsim thiab siv xov tooj cua zaus lub zog thiab yog tias tsis tau nruab thiab siv kom raug, uas yog, raws li cov chaw tsim khoom cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Nws tau raug kuaj xyuas thiab pom tias ua raws li cov kev txwv rau chav kawm A cov cuab yeej siv hauv qab J ntawm ntu 15 ntawm FCC Txoj Cai, uas yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam thaum ua haujlwm hauv kev lag luam lossis kev lag luam ib puag ncig. Kev ua haujlwm ntawm cov cuab yeej no hauv thaj chaw nyob yuav ua rau muaj kev cuam tshuam qhov twg tus neeg siv, ntawm nws tus kheej, yuav tsum tau ua txhua yam kev ntsuas tsim nyog los kho qhov cuam tshuam.

Tau Advantage hauv Cov Khoom Siv Kho Dej

• Txib Vajtage Tswj tau muab rau koj Advantage hauv cov khoom, kev paub, thiab kev txhawb nqa ntawm tag nrho koj cov khoom siv kho dej xav tau.
• Txias Ntauwd Controllers
• Boiler Blow Down Controllers
• Blow Down Valve pob
• Solenoid li qub
• Dej Meters
• Tshuaj Metering Pumps
• Corrosion Daim Coupon Racks
• Chemical Solution Tanks
• Khoom noj khoom haus Systems
• Pub Timers
• Cov khoom siv lim
• Glycol Feed Systems
• Pre Fabricated Systems
• Txib Vajtage Tswj
• 4700 Harold-Abitz Dr.
• Muskogee, OK 74403
• Xov tooj: 19186866211
• Fax: 8886866212 Dr
• www.uatagecontrols.com
• E-mail: support@advantagecontrols.com

Cov ntaub ntawv / Cov ntaub ntawv

	Txib Vajtage Tswj NANO XL Microprocessor Raws li Controllers [ua pdf] Daim ntawv qhia kev teeb tsa NANO XL, NANO XL Microprocessor Raws li Controllers, Microprocessor Raws li Controllers, Raws li cov maub los, Controllers
	Txib Vajtage Tswj NANO XL Microprocessor Raws li Controllers [ua pdf] Daim ntawv qhia kev teeb tsa NANO XL, NANO XL Microprocessor Raws li Controllers, Microprocessor Raws li Controllers, Raws li cov maub los, Controllers

Cov ntaub ntawv

• Cov neeg siv phau ntawv