YOG YS-RFID2 ID Card Serial Port Reader Module

KHOOM PLIG

• Lub npe: ID card serial chaw nres nkoj nyeem ntawv module
• Qauv: YS-RFID 2
• Specification: 5 x 2.9 x 0.5 cm
• Muab voltage: DC 5 V
• Ua haujlwm tam sim no: 26m ua
• Interface: 1 TTL serial chaw nres nkoj, 1 tso zis chaw nres nkoj
• Tam sim no tom qab pom daim npav: 20m ua
• Tso zis terminal voltage: Txog 4.3V (thaum 5V fais fab mov)
• Ua haujlwm kub: -20 ℃ to 70 ℃
• Txoj haujlwm ua haujlwm: Tom qab lub module paub txog daim npav ID, nws nquag txiav txim siab thiab tso tawm 10 tus lej daim npav. Rau example, IO chaw nres nkoj ntawm daim ntawv teev npe kuj outputs siab.

Khoom hauj lwm piav qhia

1. Txhawb kev nyeem daim npav ID, daim npav ID nkag mus, VIP keychain ID daim npav tus lej, 125K kev txhawb nqa nti TK4100.
2. Txhawb 1 TTL serial chaw nres nkoj kom tso tawm cov ntaub ntawv txiav tawm.
3. Kev them nyiaj yug 1 qhov chaw tso zis, uas tuaj yeem tswj tau qhov kev hloov ntawm cov relay module.
4. Txhawb 4 xaiv baud tus nqi, 4800, 9600, 57600, 115200bps.
5. Txhawb kev ua haujlwm xws li nyeem ntawv, rho tawm, thiab sau npe daim npav.
6. Tag nrho ntawm 0-34 daim npav tuaj yeem khaws cia, thiab tag nrho ntawm 35 daim npav ID.

Serial kev sib txuas lus raws tu qauv piav qhia

• ID card decoding method:
  Daim npav ID yuav raug txiav tawm thiab tso tawm tam sim tom qab nws mus txog, thiab qhov chaw nres nkoj serial yuav tso tawm daim npav ib zaug. Tus cwj pwm hom ntawv yog: "xov tooj: xxxxxxxxxx@" (tus lej daim npav yog tus lej 10 tus lej ntawm daim npav ID tiag)
• Serial chaw nres nkoj ua haujlwm rho tawm thiab sau npe daim npav txoj kev
  • Rho tawm txhua daim npav, qhov chaw nres nkoj serial tau txais cov cim hom yog: “Delete card: all@” —— teb “Delete tag nrho cov tiav”
  • Txhawm rau rho tawm ib daim npav, qhov chaw nres nkoj serial tau txais cov cim hom yog: "Rho tawm daim npav: daim npav 00@" Ib teb “Daim npav 0 rho tawm tiav”
  • Thaum sau npe rau ib daim npav, qhov chaw nres nkoj serial tau txais cov cim hom yog: "Daim npav sau npe: Daim npav 00@" — Teb rau “Pib sau npe daim npav”, qhov taw qhia lub teeb kom flashing thiab tos rau daim npav mus kom ze, tom qab sau npe ua tiav —— Teb "Kev Sau Npe Ua tiav" (Yog daim npav 1 muaj daim npav, nws yuav raug sau dua)
  • Nug txhua daim npav, qhov chaw nres nkoj serial tau txais cov cim hom yog: “Qee daim npav: tag nrho —— Hom ntawv teb rau txhua daim npav yog:
    Daim npav 0: XXXXXXXXXX@
    Daim npav 2: xxxxxxxxxxxxx@
• Kev teeb tsa txoj kev ntawm serial chaw nres nkoj baud tus nqi:
  • Lub serial chaw nres nkoj txais hom yog: "Teem tus nqi baud: xxxx@"
    Tus nqi Baud: 4800, 9600, 57600, 115200
    Yog tias koj xav teeb tsa tus nqi baud rau 9600, xa: "Tsim tus baud tus nqi: 96000"

Nco tseg: Kev sau npe tsuas tuaj yeem sau npe raws li kev txiav txim. Yog tias tus lej xov tooj tau sau npe, nws tuaj yeem rov sau npe dua. Yog tias tus lej xov tooj tsis tau sau npe, daim ntawv sau npe yuav raug teem raws li kev txiav txim, thiab kev sau npe tsis tuaj yeem hla. Tib yam muaj tseeb rau kev rho tawm. Yog tias muaj 10 daim npav, yog tias koj rho tawm thawj daim npav, muaj 9 daim npav sab laug, thiab daim npav qub 2 dhau los ua daim npav 1.
Examples ntawm kev siv cov txheej txheem ua haujlwm

Siv nrog computer

1. Txuas USB rau TTL rau ID daim npav nyeem ntawv module thiab ntsaws rau hauv lub computer
2. Qhib "RFID2 Module Teeb Software", xaiv qhov sib txuas COM chaw nres nkoj thiab qhib qhov chaw nres nkoj serial
3. Lub sijhawm no, koj tuaj yeem ntxiv daim npav sau npe thiab rho tawm daim npav raws li koj xav tau.

Siv nrog MCU

1. Ua ntej sau qhov kev zov me nyuam ntawm cov txheej txheem sib txuas lus ntawm MCU sib raug rau daim npav ID nyeem ntawv module. Rau example, lub microcomputer ib leeg tuaj yeem xa daim npav sau npe, rho tawm daim npav lub teeb hais kom ua rau ID daim npav nyeem ntawv module, thiab tuaj yeem tau txais qhov chaw nres nkoj serial los txiav txim seb daim npav tam sim no thiab lwm yam haujlwm. (Yuav ua ke nrog serial chaw nres nkoj pab rau kev debugging)
2. Txuas ib leeg-chip microcomputer thiab ID daim npav nyeem ntawv module, thiab tom qab ntawd koj tuaj yeem ua tiav qhov chaw nres nkoj xa thiab tau txais cov lus txib raws li qhov xwm txheej ntawm ib-chip microcomputer.
   Yog tias lub microcontroller sau tus lej ID ua ntej, lub sijhawm tom ntej ntawm daim npav ID tau hnov ​​dua, microcontroller yuav txiav txim siab seb nws puas yog tus lej daim npav tam sim no, thiab yog tias muaj, ua cov haujlwm cuam tshuam. (xws li kev ua tiav ntawm ib qho-chip microcomputer qhib lub qhov rooj thiab qhib lub teeb, thiab lwm yam.)

Cov ntaub ntawv / Cov ntaub ntawv

YOG YS-RFID2 ID Card Serial Port Reader Module [ua pdf] Cov lus qhia YS-RFID2 ID Card Serial Port Reader Module, YS-RFID2, ID Card Serial Port Reader Module, ID Card Serial, Chaw nres nkoj nyeem ntawv Module, Chaw nres nkoj Module, Nyeem ntawv Module, Module, YS-RFID2 Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv