HARMAN Muse Automator Low Code Software Application

Cov ntaub ntawv khoom

Specifications

• No-code / low-code software thov
• Tsim los siv nrog AMX MUSE Controllers
• Ua los ntawm Node-RED flow-based programming tool
• Yuav Tsum Tau NodeJS (v20.11.1+) & Node Pob Tus Thawj Coj (NPM) (v10.2.4+)
• Compatibility: Windows lossis MacOS PC

Cov lus qhia siv khoom

Teeb & Teeb

Ua ntej txhim kho MUSE Automator, xyuas kom meej tias koj tau nruab qhov tsim nyog dependencies:

1. Nruab NodeJS thiab NPM los ntawm kev ua raws li cov lus qhia hauv qab no: NodeJS
   Daim ntawv qhia kev teeb tsa.
2. Nruab MUSE Automator ntawm koj lub PC los ntawm kev ua raws li cov lus qhia ntawm tus installer.
3. Hloov kho MUSE Controller firmware muaj nyob rau amx.com.
4. Pab txhawb Node-RED hauv MUSE Controller los ntawm kev ua raws li cov kauj ruam tau hais hauv phau ntawv.

Pib nrog MUSE Automator

Automator hom kev ua haujlwm

Simulation hom
Siv Automator hauv Simulation Hom:

1. Luag tus Controller node mus rau qhov chaw ua haujlwm.
2. Xaiv 'simulator' los ntawm lub thawv dropdown nyob rau hauv lub edit dialog.
3. Nyem 'Ua tiav' thiab xa mus kom pom cov xwm txheej simulator txuas nrog.

Ntxiv Drivers & Devices
Ntxiv cov tsav tsheb sib xws thiab cov khoom siv raws li koj xav tau.

Txuas hom
Siv Kev Txuas Hom:

1. Sau qhov chaw nyob ntawm koj lub cev MUSE maub los hauv Controller node nqis.
2. Muab username thiab password rau tus maub los.
3. Nyem 'Txuas' txhawm rau tsim kev sib txuas nrog Node-RED server ntawm MUSE Controller.

FAQ

Q: Kuv yuav ua li cas yog MUSE Automator khiav tsis raug?
A: Nco ntsoov tias koj tau nruab tag nrho cov kev vam meej tsim nyog thiab ua raws li cov lus qhia installation kom raug. Hu rau cov neeg siv khoom txhawb nqa rau kev pab ntxiv.

Q: Kuv yuav hloov kho lub MUSE Controller firmware li cas?
A: Koj tuaj yeem hloov kho lub firmware los ntawm rub tawm qhov tseeb version ntawm amx.com thiab ua raws li cov lus qhia muab rau firmware hloov tshiab.

Teeb & Teeb

MUSE Automator yog daim ntawv thov tsis muaj code / qis-code software tsim los siv nrog AMX MUSE Controllers. Nws yog tsim los ntawm Node-RED, siv dav siv cov cuab yeej ua haujlwm raws li qhov programming.

Yam yuavtsum tau kawm uantej
Ua ntej txhim kho MUSE Automator, koj yuav tsum nruab ntau qhov kev cia siab tau teev tseg hauv qab no. Yog tias cov kev cia siab no tsis tau teeb tsa ua ntej, Automator yuav tsis ua haujlwm raug.

1. Nruab NodeJS (v20.11.1+) & Node Package Manager (NPM) (v10.2.4+) Automator yog ib qho kev cai version ntawm Node-RED software, yog li nws xav kom NodeJS khiav ntawm koj lub cev. Nws tseem xav kom Node Package Manager (NPM) tuaj yeem txhim kho cov neeg thib peb. Txhawm rau nruab NodeJS thiab NPM, mus rau qhov txuas hauv qab no thiab ua raws li cov lus qhia kev teeb tsa: https://docs.npmis.com/downloading-and=installing-node-is-and-npm
2. Nruab Git (v2.43.0+)
   Git yog ib tug version tswj system. Rau Automator, nws ua rau Project feature kom koj tuaj yeem npaj koj cov dej ntws mus rau hauv cov haujlwm tsis sib xws. Nws kuj ua rau Push/Pull functionality yuav tsum tau xa koj cov ntws mus rau lub cev MUSE Controller. Txhawm rau nruab Git, mus rau qhov txuas hauv qab no thiab ua raws li cov lus qhia: https://git:scm.com/book/en/v2/Getting-Started-Installing-Git

Nco tseg: Git installer yuav coj koj los ntawm ntau txoj kev xaiv installation. Nws yog pom zoo kom siv lub neej ntawd thiab installer-pom zoo xaiv. Thov xa mus rau Git cov ntaub ntawv kom paub ntau ntxiv.

Nruab MUSE Automator
Thaum Git, NodeJS, thiab NPM tau teeb tsa, koj tuaj yeem nruab MUSE Automator. Nruab MUSE Automator ntawm koj lub Windows lossis MacOS PC thiab ua raws li cov lus qhia ntawm tus installer.

Nruab MUSE Controller Firmware
Txhawm rau siv MUSE Automator nrog AMX MUSE maub los, koj yuav tsum tau hloov kho MUSE maub los firmware muaj nyob rau ntawm amx.com.

Pab Txhawb Node-RED hauv MUSE Controller
Node-RED yog neeg xiam oob qhab ntawm MUSE maub los los ntawm lub neej ntawd. Nws yuav tsum tau manually enabled. Txhawm rau ua qhov no, nkag mus rau hauv koj lub MUSE maub los thiab mus rau System> Extensions. Hauv Daim Ntawv Ntxiv Ntxiv Ntxiv, nqes mus rau mojonodred thiab nyem rau nws xaiv. Nias lub pob nyem rau nruab Node-RED txuas ntxiv thiab tso cai rau tus tswj hwm hloov tshiab. Saib screenshot hauv qab no rau kev siv:

Lwm cov ntaub ntawv
Yog tias koj muaj firewall enabled ntawm koj lub PC, koj yuav tsum xyuas kom meej tias koj muaj Chaw nres nkoj 49152 qhib rau Automator los sib txuas lus los ntawm qhov chaw nres nkoj no kom raug.

Pib nrog MUSE Automator

Tau paub Node-RED
Txij li Automator yog qhov tseem ceeb ntawm kev hloov kho ntawm Node-RED, koj yuav tsum xub paub txog Node-RED daim ntawv thov. Lub software muaj ib tug kuj ntiav kev kawm nkhaus. Muaj ntau pua cov ntawv thiab cov yeeb yaj kiab qhia muaj los kawm Node-RED, tab sis qhov chaw zoo pib yog nyob rau hauv cov ntaub ntawv Node-RED: https://nodered.org/docs. Tshwj xeeb, nyeem los ntawm Cov Lus Qhia, Cookbook, thiab Kev Tsim Nyog kom paub koj tus kheej nrog daim ntawv thov cov yam ntxwv thiab cov neeg siv interface.

Cov lus qhia no yuav tsis suav txog cov hauv paus ntawm Node-RED lossis cov programming ntws, yog li nws yog qhov tseem ceeb uas koj yuav tsum tau ua.view cov ntaub ntawv nom tswv Node-RED ua ntej pib.

Automator Interface Tshajview
Lub Automator editor interface yog qhov tseem ceeb tib yam li Node-RED default editor nrog qee qhov tweaks rau cov ntsiab lus thiab qee qhov kev cai ua haujlwm uas ua rau muaj kev sib cuam tshuam ntawm tus editor thiab MUSE maub los.

1. MUSE Automator Palette - kev cai nodes rau kev ua hauj lwm nrog HARMAN li
2. Flow Tab - Rau kev hloov ntawm views ntawm ntau yam ntws
3. Chaw Ua Haujlwm - Qhov chaw koj tsim koj cov dej ntws. Luag cov nodes ntawm sab laug thiab poob rau hauv chaw ua haujlwm
4. Push / Rub Tray - Rau kev tswj cov haujlwm hauv zos lossis ntawm tus tswj hwm. Push, rub, pib, nres, rho tawm ib qhov project.
5. Deploy Button/Tray – Rau deploying flows from the editor to the local Node-RED server
6. Hamburger Menu - Cov ntawv qhia zaub mov tseem ceeb ntawm daim ntawv thov. Tsim tej yaam num, qhib tej yaam num, tswj flows, thiab lwm yam.

Automator hom kev ua haujlwm
Muaj peb txoj hauv kev ua haujlwm nrog Automator. Cov no tsis yog constrictive "hom" per se, tab sis tsuas yog txoj kev siv Automator. Peb siv lub sij hawm hom ntawm no rau simplicity.

1. Kev simulation - Cov dej ntws tau muab tso rau hauv zos thiab khiav ntawm MUSE simulator yog li koj tuaj yeem sim yam tsis muaj tus tswj lub cev.
2. Txuas - Koj txuas nrog lub cev MUSE maub los thiab ntws tau siv thiab tom qab ntawd khiav hauv zos ntawm PC. Yog tias koj kaw Automator, cov dej ntws yuav tsis ua haujlwm.
3. Standalone - Koj tau thawb koj cov dej ntws mus rau MUSE maub los khiav ntawm nws tus kheej ntawm tus maub los.
   Txawm hais tias koj tab tom khiav hom twg, koj yuav tsum paub cov cuab yeej twg koj tab tom npaj los tswj lossis automate, thiab tom qab ntawd thauj lawv cov tsav tsheb mus rau lub simulator lossis tus tswj lub cev. Txoj kev thauj cov tsav tsheb mus rau lub hom phiaj yog txawv heev. Kev thauj cov tsav tsheb mus rau lub simulator tshwm sim nyob rau hauv Automator Controller node kho dialog (saib Ntxiv Tsav Tsheb & Devices ). Kev thauj cov tsav tsheb mus rau MUSE maub los yog ua tiav hauv tus maub los web interface. Yog xav paub ntxiv txog kev thauj cov tsav tsheb rau koj lub MUSE maub los, xa mus rau cov ntaub ntawv ntawm https://www.amx.com/products/mu-3300#downloads.

Simulation hom
Txhawm rau siv Automator hauv Simulation Hom, luag tus Controller node mus rau qhov chaw ua haujlwm thiab qhib nws cov lus hloov kho. Xaiv lub simulator los ntawm lub thawv dropdown thiab nyem lub pob Ua tiav. Tam sim no koj tuaj yeem siv cov nodes uas tuaj yeem nkag mus rau qhov kawg ntawm cov cuab yeej simulator.

Nyem rau Deploy khawm thiab koj yuav tsum pom cov xwm txheej simulator qhia raws li kev txuas nrog lub thawv ntawv qhia zaub ntsuab:

Ntxiv Drivers & Devices
Muaj ntau lub simulators twb tau tsim rau hauv Automator Controller Node:

• CE Series IO Extenders: CE-IO4, CE-IRS4, CE-REL8, CE-COM2
• MU Series Controller I/O ports: MU-1300, MU-2300, MU-3300
• MU Series Controller pem hauv ntej vaj huam sib luag LED: MU-2300, MU-3300
• Ib tug generic NetLinx ICSP ntaus ntawv

Txhawm rau ntxiv cov khoom siv rau koj lub simulator:

1. Nyem lub Upload khawm nyob ib sab ntawm cov npe ntawm Cov Chaw Pabcuam. Qhov no yuav qhib koj cov ntaub ntawv system dialog. Xaiv tus tsav tsheb sib thooj rau lub cuab yeej npaj. Nco tseg: hom tsav tsheb hauv qab no tuaj yeem muab tso rau:
   • DUET modules (Rov qab los ntawm developer.amx.com)
   • Native MUSE tsav tsheb
     c. Simulator cov ntaub ntawv
2. Thaum tus tsav tsheb tau upload lawm, koj tuaj yeem ntxiv cov khoom siv los ntawm nias lub khawm Ntxiv ib sab ntawm cov npe khoom siv.

Txuas hom
Kev sib txuas hom xav kom koj muaj lub cev MUSE maub los ntawm koj lub network uas koj tuaj yeem txuas tau. Qhib koj lub Controller node thiab nkag mus rau qhov chaw nyob ntawm koj lub MUSE maub los. Chaw nres nkoj yog 80 thiab teeb tsa los ntawm lub neej ntawd. Sau tus username thiab password rau koj tus maub los thiab tom qab ntawd nias lub pob Txuas. Koj yuav tsum tau soj ntsuam ib qho kev ceeb toom uas Automator tau txuas nrog rau Node-RED server ntawm MUSE Controller. Saib screenshot hauv qab no.

Standalone hom
Hom kev ua haujlwm no nrog Automator tsuas yog thawb koj cov dej ntws los ntawm koj lub PC hauv zos mus rau Node-RED server khiav ntawm MUSE maub los. Qhov no yuav tsum tau qhib qhov project (uas yuav tsum muaj lub installation ntawm git). Nyeem hauv qab no kom paub ntau ntxiv txog Cov Haujlwm thiab Push/Pull.

Kev xa tawm
Txhua lub sij hawm koj hloov mus rau ib lub node koj yuav tsum tau xa cov kev hloov pauv ntawm tus editor mus rau Node-RED server los ua kom cov dej ntws. Muaj qee qhov kev xaiv rau dab tsi thiab yuav ua li cas xa koj cov dej ntws hauv Deploy dropdown. Yog xav paub ntxiv txog kev xa tawm hauv Node-RED, thov saib cov ntaub ntawv Node-RED.

Thaum xa tawm hauv Automator, cov dej ntws tau xa mus rau lub zos Node-RED server khiav ntawm koj lub PC. Tom qab ntawd, cov kev xa tawm yuav tsum tau "them" los ntawm koj lub PC hauv zos mus rau Node-RED server khiav ntawm MUSE Controller.

Ib txoj hauv kev zoo los txiav txim siab yog tias koj muaj kev hloov pauv tsis tau siv rau koj cov dej ntws / cov nodes yog nyob rau hauv Deploy button nyob rau sab xis sab xis ntawm daim ntawv thov. Yog tias nws greyed tawm thiab tsis muaj kev sib tham, ces koj tsis muaj kev hloov pauv hauv koj cov dej ntws. Yog tias nws liab thiab sib tham sib, ces koj muaj kev hloov pauv hauv koj cov dej ntws. Saib cov screenshots hauv qab no.

Tej yaam num
Txhawm rau rub / rub los ntawm koj lub zos Node-RED server mus rau lub server khiav ntawm koj tus maub los, Cov Haujlwm yuav tsum tau qhib hauv Automator. Qhov Projects feature tau txais kev tso cai yog tias git tau teeb tsa hauv koj lub PC. Txhawm rau kawm paub yuav ua li cas rau nruab git, saib ntu Nruab Git ntawm phau ntawv qhia no.
Piv txwv li, koj tau teeb tsa git thiab rov pib MUSE Automator, koj tuaj yeem tsim qhov project tshiab los ntawm txhaj rau cov ntawv qhia zaub mov hamburger nyob rau sab xis sab xis ntawm daim ntawv thov.

Nkag mus rau lub npe qhov project (tsis muaj qhov chaw lossis cov cim tshwj xeeb tso cai), thiab tam sim no, xaiv qhov kev xaiv Disable encryption hauv qab Daim Ntawv Pov Thawj. Nias lub Create Project khawm kom tiav qhov project creation.

Tam sim no koj tau tsim ib qhov project, koj tuaj yeem thawb / rub mus rau lub cev MUSE maub los.

Pushing/Pulling Projects
Thawb thiab rub koj cov dej ntws los ntawm koj lub PC mus rau Node-RED server ntawm MUSE maub los yog qhov tshwj xeeb hauv Automator. Ob peb kauj ruam yuav tsum tau ua ua ntej koj tuaj yeem Push / Pull

1. Xyuas kom tseeb tias koj txuas nrog koj lub MUSE maub los ntawm Controller node
2. Nco ntsoov tias koj tau siv cov kev hloov pauv hauv koj cov dej ntws (lub Deploy khawm yuav tsum greyed tawm)

Txhawm rau thawb koj cov dej ntws los ntawm koj lub PC, nyem rau ntawm Push/Pull down xub.

Hover dhau qhov Local project thiab nyem lub upload icon txhawm rau thawb qhov project los ntawm koj lub zos Node-RED server mus rau Node-RED server ntawm koj lub MUSE maub los.

Tom qab thawb koj qhov project hauv zos mus rau tus maub los, nias lub khawm Push / Pull (tsis yog xub) thiab qhov project yuav tsum tshwm sim ua haujlwm ntawm tus maub los.
Ib yam li ntawd, ib qhov project uas raug thawb mus rau tus maub los, tuaj yeem rub tawm ntawm tus maub los rau koj lub PC. Hover tshaj qhov chaw deb qhov project nyem lub download icon rub tawm qhov project.

Khiav ib qhov Project
Tej yaam num uas khiav ntawm tus maub los lossis khiav ntawm koj lub zos Node-RED server yuav raug qhia los ntawm daim ntawv lo ntawm kev khiav. Txhawm rau khiav ib txoj haujlwm sib txawv ntawm cov chaw taws teeb chaw taws teeb lossis Local server, txav mus rau qhov project thiab nyem rau ntawm lub cim ua si. Nco tseg: tsuas yog ib qhov project tuaj yeem ua haujlwm ntawm ib lub sijhawm ntawm Local lossis Chaw Taws Teeb.

Rho tawm ib qhov Project
Txhawm rau rho tawm ib qhov project, nyem rau ntawm qhov project npe nyob rau hauv Lub Zos lossis Chaw Taws Teeb thiab nyem lub cim thoob khib nyiab. Lus ceeb toom: ceev faj txog qhov koj yuav rho tawm, lossis koj yuav poob haujlwm.

Tso tseg ib qhov Project

Tej zaum yuav muaj xwm txheej uas koj xav nres lossis pib qhov haujlwm Automator hauv zos lossis nyob deb ntawm tus maub los. Automator muab lub peev xwm los pib lossis nres txhua qhov haujlwm raws li qhov xav tau. Txhawm rau nres ib qhov project, nyem kom nthuav dav Push/Pull tray. Hover tshaj txhua qhov haujlwm khiav hauv cov chaw taws teeb lossis Cov npe hauv zos thiab tom qab ntawd nyem rau ntawm lub cim nres.

MUSE Automator Node Palete 

Automator nkoj nrog peb tus kheej kev cai node palette kuj hu ua MUSE Automator. Tam sim no muaj xya nodes muab los ua kom muaj kev ua haujlwm thiab kev cuam tshuam nrog cov simulator thiab MUSE controllers.

Tus tswj
Lub Controller node yog dab tsi muab koj cov dej simulator lossis MUSE maub los cov ntsiab lus thiab programmatic nkag mus rau cov khoom siv uas tau ntxiv rau tus maub los. Nws muaj cov hauv qab no uas tuaj yeem teeb tsa:

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Controller - tus maub los lossis simulator uas koj xav txuas. Xaiv lub simulator txuas mus rau lub simulated MUSE maub los. Txhawm rau txuas mus rau tus tswj lub cev, xyuas kom meej tias nws txuas nrog koj lub network thiab nkag mus rau nws tus IP chaw nyob hauv thaj chaw tus tswv. Nias lub khawm Txuas txuas mus rau tus maub los.
• Cov kws kho mob - cov npe ntawm cov tsav tsheb uas tau muab tso rau hauv koj lub simulator lossis tus tswj hwm. Nias lub Upload khawm ntxiv tus tsav tsheb. Xaiv tus tsav tsheb thiab nias Delete kom rho tawm tus tsav tsheb ntawm daim ntawv.
• Cov cuab yeej siv - cov npe ntawm cov khoom siv uas tau ntxiv rau lub simulator lossis tus maub los.
  • Kho kom raug - Xaiv ib lub cuab yeej los ntawm cov npe thiab nyem Kho kom raug kho nws cov khoom
  • Ntxiv - Nyem rau ntxiv ib lub cuab yeej tshiab (raws li cov tsav tsheb hauv cov npe Cov Chaw Pabcuam).
    • Piv txwv - Thaum ntxiv ib lub cuab yeej tshiab yuav tsum muaj lub npe piv txwv tshwj xeeb.
    • Lub npe - xaiv tau. Lub npe rau lub cuab yeej
    • Nqe lus piav qhia – xaiv tau. Nqe lus piav qhia rau lub cuab yeej.
    • Tsav Tsheb - Xaiv tus tsav tsheb tsim nyog (raws li cov tsav tsheb hauv cov npe Cov Chaw Pabcuam).
  • Rho tawm - Xaiv ib lub cuab yeej los ntawm cov npe thiab nyem Rho tawm kom rho tawm lub cuab yeej.

xwm txheej
Siv lub Status node kom tau txais cov xwm txheej lossis lub xeev ntawm cov khoom siv tshwj xeeb.

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Ntaus - xaiv lub cuab yeej (raws li cov npe Devices hauv Controller node). Qhov no yuav tsim cov ntoo tsis muaj nyob hauv cov npe hauv qab no. Xaiv qhov parameter rau cov xwm txheej retrieval.
• Parameter – Nyeem-tsuas teb uas qhia tau hais tias txoj kev parameter ntawm qhov kev xaiv parameter.

Kev tshwm sim
Siv lub Event node los mloog cov xwm txheej ntawm cov cuab yeej xws li kev hloov pauv hauv lub xeev los ua kom muaj kev nqis tes ua (xws li cov lus txib)

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Ntaus - xaiv lub cuab yeej (raws li cov npe Devices hauv Controller node). Qhov no yuav tsim cov ntoo tsis muaj nyob hauv cov npe hauv qab no. Xaiv ib qho parameter ntawm daim ntawv.
• Kev tshwm sim – Nyeem-tsuas teb uas qhia txog txoj kev parameter
• Hom xwm txheej – Nyeem-tsuas yog hom kev xaiv qhov xwm txheej.
• Hom Parameter – Nyeem-tsuas cov ntaub ntawv hom ntawm cov kev xaiv xaiv.
• Kev tshwm sim (tsis muaj npe) - lub thawv ntim nrog cov npe ntawm cov xwm txheej uas tuaj yeem mloog tau

txib
Siv cov Command node xa cov lus txib mus rau ib lub cuab yeej.

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Ntaus - xaiv lub cuab yeej (raws li cov npe Devices hauv Controller node). Qhov no yuav tsim cov ntoo tsis muaj nyob hauv cov npe hauv qab no. Tsuas yog cov kev txwv uas tuaj yeem teeb tsa yuav raug pom.
• Xaiv – Nyeem-tsuas teb uas qhia txoj kev parameter.
• Cov tswv yim - Xaiv Manual configuration kom pom cov lus txib muaj nyob rau hauv lub thawv dropdown uas tuaj yeem ua tiav.

Nrhiav
Siv lub Navigate node los ua ib nplooj ntawv tig mus rau TP5 kov vaj huam sib luag

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Vaj huam sib luag - Xaiv lub kov vaj huam sib luag (ntxiv los ntawm Control Panel node)
• Cov lus txib - Xaiv qhov Flip hais kom ua
• G5 - Ib txoj hlua kho tau ntawm cov lus txib xa. Xaiv cov nplooj ntawv los ntawm cov npe tsim cov nplooj ntawv vaj huam sib luag kom populate daim teb no.

Tswj Vaj Huam Sib Luag
Siv lub Control Vaj Huam Sib Luag node ntxiv cov ntsiab lus kov vaj huam sib luag rau qhov ntws.

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Ntaus - Xaiv cov khoom siv kov vaj huam sib luag
• Vaj Huam Sib Luag – Nyem Xauj mus upload ib cov ntaub ntawv .TP5. Qhov no yuav tsim ib tsob ntoo nyeem nkaus xwb ntawm cov ntaub ntawv kov vaj huam sib luag nplooj ntawv thiab cov nyees khawm. Siv cov npe no raws li kev txheeb xyuas cov ntaub ntawv.

UI tswj
Siv UI Control node rau cov kev pab cuam khawm lossis lwm yam kev tswj los ntawm cov ntaub ntawv kov vaj huam sib luag.

• Lub npe - universal lub npe khoom rau tag nrho cov nodes.
• Ntaus ntawv - Xaiv lub cuab yeej kov vaj huam sib luag
• Hom - Xaiv hom UI tswj. Xaiv UI tswj los ntawm nplooj ntawv / khawm ntoo hauv qab no
• Ua rau - Xaiv qhov ua rau kev tswj hwm UI (example, PUSH or RELEASE)
• Xeev - Teem lub xeev ntawm UI tswj thaum nws tshwm sim (example, ON or OFF)

Example Workflow

Hauv no exampraws li txoj haujlwm, peb yuav:

• Txuas mus rau MUSE maub los
• Tsim tawm qhov ntws uas tso cai rau peb los hloov lub xeev ntawm kev xa xov ntawm MU-2300
• Xa cov dej mus rau peb lub zos Node-RED server

Txuas mus rau MUSE Controller 

1. Teeb koj lub MUSE maub los. Xa mus rau cov ntaub ntawv ntawm
2. Luag lub Controller node los ntawm MUSE Automator node palette rau daim ntaub thiab muab ob npaug rau-nias nws qhib nws cov dialog hloov.
3. Nkag mus rau IP chaw nyob ntawm koj lub MUSE maub los thiab nias lub pob Txuas thiab tom qab ntawd khawm Ua tiav.
   Tom qab ntawd nias lub Deploy khawm. Koj lub dialog thiab Controller node yuav tsum zoo li:

Tsim & Siv Ib Qhov Ncauj 

1. Tom ntej no, cia peb pib tsim cov dej ntws los ntawm kev rub ob peb lub rau ntawm daim ntaub. Luag cov nodes hauv qab no thiab tso rau sab laug mus rau txoj cai:
   • Txhaj
   • xwm txheej
   • Hloov (hauv qab lub luag haujlwm palette)
   • Command (dab ob)
   • Debug
2. Muab ob npaug rau-nias qhov Txhaj node thiab hloov nws lub npe mus rau "Manual Trigger" thiab nias Ua tiav
3. Double-click lub Status node thiab hloov cov khoom hauv qab no:
   • Hloov nws lub npe mus rau "Get Relay 1 Status"
   • Los ntawm cov ntaus ntawv dropdown, xaiv idevice
   • Nthuav cov nplooj relay ntawm tsob ntoo thiab xaiv 1 thiab tom qab ntawd hais
   • Nias Ua Ntej
4. Ob-nias lub Switch node thiab hloov cov khoom hauv qab no:
   • Hloov lub npe mus rau "Kos Relay 1 Status"
   • Nyem qhov + ntxiv khawm nyob rau hauv qab ntawm lub dialog. Tam sim no koj yuav tsum muaj ob txoj cai hauv daim ntawv teev npe. Ib lub ntsiab lus rau 1 chaw nres nkoj thiab ob lub ntsiab lus rau 2 chaw nres nkoj
   • Ntaus qhov tseeb rau hauv thawj qhov chaw thiab teeb hom rau kev qhia
   • Ntaus qhov cuav rau hauv qhov thib ob thiab teeb hom rau kev qhia
   • Koj qhov hloov pauv node yuav tsum zoo li no:
5. Ob-nias thawj Command node thiab hloov cov khoom hauv qab no:
   • Hloov lub npe mus rau "Teeb Relay 1 False"
   • Los ntawm cov ntaus ntawv dropdown, xaiv idevice
   • Nthuav cov nplooj relay ntawm tsob ntoo thiab xaiv 1 thiab tom qab ntawd hais tias tom qab ntawd nias Ua tiav
6. Muab ob npaug rau nyem qhov thib ob Command node thiab hloov kho cov khoom hauv qab no:
   • Hloov lub npe mus rau "Teeb Relay 1 Tseeb"
   • Los ntawm cov ntaus ntawv dropdown, xaiv idevice
   • Nthuav cov nplooj relay ntawm tsob ntoo thiab xaiv 1 thiab tom qab ntawd hais tias tom qab ntawd nias Ua tiav
7. Txuas tag nrho cov nodes ua ke xws li:
   • Txhaj node rau qhov xwm txheej node
   • Status node mus rau Hloov node
   • Hloov node chaw nres nkoj 1 mus rau Command Node hu ua "Teeb Relay 1 False"
   • Hloov node chaw nres nkoj 2 mus rau Command node hu ua "Teeb Relay 1 Tseeb"
   • Xa ob qhov Command nodes mus rau qhov debug node

Thaum koj tau ua tiav configuring thiab xaim koj cov node, koj cov canvas ntws yuav tsum zoo ib yam li ntawd:

Tam sim no koj npaj txhij los siv koj cov dej ntws. Nyob rau sab xis sab xis, ntawm daim ntawv thov nyem lub pob nyem kom xa koj cov dej mus rau lub zos Node-RED server. Yog tias koj txuas nrog MUSE maub los, tam sim no koj yuav tsum tuaj yeem txuas ntxiv nias lub pob ntawm qhov txhaj tshuaj thiab pom lub xeev relay hloov ntawm qhov tseeb mus rau qhov tsis tseeb nyob rau hauv qhov debug pane (thiab pom / hnov ​​lub relay hloov ntawm tus maub los nws tus kheej! ).

Cov peev txheej ntxiv

• AMX YouTube Channel - htps://www.youtube.com/@AMXbyHARMAN
• AMX Developer Resources – htps://developer.amx.com/#!/main
• Node-RED YouTube Channel - htps://www.youtube.com/@Node-RED
• Node-RED Cov Ntaub Ntawv - htps://nodered.org/docs/

© 2024 Harman. Tag nrho cov cai. SmartScale, NetLinx, Enova, AMX, AV FOR AN IT WORLD, thiab HARMAN, thiab lawv cov logos yog cov cim lag luam ntawm HARMAN. Oracle, Java thiab lwm lub tuam txhab lossis cov npe lag luam hais txog tej zaum yuav yog cov cim lag luam / npe lag luam ntawm lawv cov tuam txhab.

AMX tsis ua lub luag haujlwm rau kev ua yuam kev lossis kev tso tseg. AMX tseem muaj txoj cai los hloov cov kev qhia tshwj xeeb yam tsis tau ceeb toom ua ntej txhua lub sijhawm. AMX Warranty thiab Return Policy thiab cov ntaub ntawv ntsig txog tuaj yeem ua tau viewed/downloaded ntawm www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com
800.222.0193
469.624.8000
+1.469.624.7400
fev 469.624.7153
Kho tshiab kawg: 2024-03-01

Cov ntaub ntawv / Cov ntaub ntawv

HARMAN Muse Automator Low Code Software Application [ua pdf] Phau ntawv qhia Muse Automator Low Code Software Application, Automator Low Code Software Application, Low Code Software Application, Code Software Application, Software Application, Daim ntawv thov

Cov ntaub ntawv

• Cov neeg siv phau ntawv