BOSCH B228 SDI2 8-Input, 2-Output Expansion Module

Specifications

• 8 cov ntsiab lus / cheeb tsam saib xyuas kev nthuav dav
• 2 ntxiv switched outputs
• Txuas rau cov tswj vaj huam sib luag los ntawm SDI2 npav
• Sib txuas lus rov qab txhua qhov xwm txheej hloov pauv mus rau lub vaj huam sib luag
• Inputs thiab outputs nkag los ntawm on-board ntsia hlau davhlau ya nyob twg txuas

Kev nyab xeeb

Ceev faj!
Tshem tawm tag nrho cov fais fab (AC thiab roj teeb) ua ntej ua kev sib txuas. Tsis ua li ntawd yuav ua rau tus kheej raug mob thiab/los yog khoom puas tsuaj.

Tshajview

• B228 8-Input, 2-Output Expansion Module yog 8 lub ntsiab lus / thaj chaw saib xyuas kev nthuav dav nrog 2 qhov hloov pauv ntxiv uas txuas rau cov tswj vaj huam sib luag los ntawm SDI2 tsheb npav.
• Qhov module no sib txuas lus rov qab mus rau lub vaj huam sib luag tswj txhua qhov kev hloov pauv hloov pauv, thiab cov zis tau hloov mus rau thiab tawm los ntawm cov lus txib los ntawm kev tswj hwm vaj huam sib luag. Cov inputs thiab outputs yog nkag los ntawm on-board ntsia hlau davhlau ya nyob twg kev twb kev txuas.

Fig. 1: board overview

1	Lub plawv dhia LED (xiav)
2	Tampyog hloov connector
3	SDI2 interconnect thaiv cov connectors (kom tswj vaj huam sib luag lossis ntxiv modules)
4	SDI2 davhlau ya nyob twg strip (kom tswj vaj huam sib luag los yog ntxiv modules)
5	Terminal strip (tso tawm)
6	Terminal sawb (point inputs)
7	Chaw nyob keyboards

Chaw nyob chaw

• Ob qhov chaw nyob hloov txiav txim qhov chaw nyob rau B228 module. Cov tswj vaj huam sib luag siv qhov chaw nyob rau kev sib txuas lus. Qhov chaw nyob kuj txiav txim siab cov lej tso zis.
• Siv ib tug slotted screwdriver los teem ob qhov chaw nyob switches.

Daim ntawv ceeb toom!

• Lub module nyeem qhov chaw nyob hloov chaw tsuas yog thaum lub zog nce.
• Yog tias koj hloov cov keyboards tom qab koj siv lub zog rau lub module, koj yuav tsum voj voog lub zog rau lub module kom pab tau qhov chaw tshiab.
  • Configure qhov chaw nyob keyboards raws li kev tswj vaj huam sib luag teeb tsa.
  • Yog tias muaj ntau B228 modules nyob rau hauv tib lub cev, txhua B228 module yuav tsum muaj qhov chaw nyob sib txawv. Qhov chaw nyob keyboards ntawm lub module qhia txog kaum thiab tus nqi ntawm lub module qhov chaw nyob.
  • Thaum siv ib tus lej chaw nyob ntawm tus lej 1 txog 9, teem kaum hloov mus rau 0 thiab tus lej rau tus lej sib raug.

Chaw nyob chaw nyob rau ib lub vaj huam sib luag tswj
Qhov chaw nyob B228 siv tau yog nyob ntawm tus naj npawb ntawm cov ntsiab lus tso cai los ntawm ib qho kev tswj hwm.

Tswj vaj huam sib luag	Onboard cov naj npawb	Siv tau B228 chaw nyob	Sib thamnyob rau hauv tus lej point
ICP-SOL3-P ICP-SOL3- APR ICP-SOL3-PE	01–08 : kuv	01	09–16 : kuv
ICP-SOL4-P ICP-SOL4-PE	01–08 : kuv	01 02 03	09–16 : kuv 17–24 : kuv 25–32 : kuv
	01 – 08 (3K3) 09 – 16 (6K8)	02 03	17–24 : kuv 25–32 : kuv
	01 – 08 (3K3) 09 – 16 (6K8)	02	17 – 24 (3K3) 25 – 32 (6K8)

Kev teeb tsa

Tom qab koj teeb tsa qhov chaw nyob hloov pauv rau qhov chaw nyob zoo, teeb tsa lub module hauv lub kaw lus, thiab tom qab ntawd xaim mus rau lub vaj huam sib luag.

Mount lub module nyob rau hauv lub enclosure
Mount lub module rau hauv lub enclosure lub 3-qhov mounting qauv siv cov khoom mounting screws thiab mounting bracket.

Mounting lub module nyob rau hauv lub enclosure

1	Module nrog mounting bracket ntsia
2	Npog
3	Ntsia Hlau Screws (3)

Mount thiab xaim lub tampua switch
Koj tuaj yeem txuas ib qho kev xaiv enclosure qhov rooj tamper hloov rau ib module nyob rau hauv ib tug enclosure. st

1. Txhim kho qhov kev xaiv tamper hloov: Mount ICP-EZTS Tamper Hloov (P / N: F01U009269) mus rau hauv lub enclosure tamper hloov mounting qhov chaw. Rau cov lus qhia ua tiav, xa mus rau EZTS Npog thiab Phab Ntsa Tamper Hloov Daim Ntawv Qhia Kev Txhim Kho (P/N: F01U003734)
2. Plug lub tamper hloov xaim mus rau module's tampyog hloov connector.

Xaim rau lub vaj huam sib luag
Xaim lub module rau lub vaj huam sib luag tswj siv ob qho tib si hauv qab no, tab sis tsis txhob siv ob qho tib si.

• SDI2 interconnect xov hlau txuas, xaim nrog
• SDI2 terminal strip, sau nrog PWR, A, B, thiab COM

Kev sib txuas xov hluav taws xob sib npaug ntawm PWR, A, B, thiab COM terminals ntawm lub davhlau ya nyob twg strip.

Daim ntawv ceeb toom!
Thaum txuas ntau lub modules, muab cov khoom siv davhlau ya nyob twg thiab sib txuas cov kab txuas txuas hauv series.

Siv SDI2 interconnect thaiv cov connectors

1	Tswj vaj huam sib luag
2	B228 module
3	Interconnect cable (P / N: F01U079745) (nrog)

Siv lub davhlau ya nyob twg strip

1	Tswj vaj huam sib luag
2	B228 module

Output loop thaiv

• Muaj 3 terminals rau cov zis.
• Ob qhov tso zis OC1 thiab OC2 sib koom ib lub davhlau ya nyob twg sau npe +12V. Ob qhov tso zis no yog hloov pauv cov zis tawm ntawm nws tus kheej, thiab lawv cov zis hom thiab kev ua haujlwm tau txais kev txhawb nqa los ntawm kev tswj vaj huam sib luag.
• Thaum siv cov khoom ntes, cov khoom siv hloov pauv muab SDI2 voltage tshaj 100 mA ntawm lub zog.

Sensor loop thaiv
Qhov tsis kam ntawm cov xov hlau ntawm txhua lub voj sensor, thaum txuas nrog cov cuab yeej kuaj pom, yuav tsum qis dua 100Ω.

Lub B228 module kuaj pom qhib, luv luv, ib txwm, thiab hauv av txhaum Circuit Court tej yam kev mob ntawm nws cov sensor loops thiab xa cov xwm txheej no mus rau cov tswj vaj huam sib luag. Txhua lub voj sensor tau muab lub cim taw qhia / cheeb tsam tus lej thiab xa ib tus zuj zus mus rau cov tswj vaj huam sib luag. Xyuas kom meej tias cov xaim xaim tawm ntawm lub xov tooj thiab AC xaim hauv qhov chaw.

Daim duab 4: Sensor loops

1	Zone tsis muaj resistor
2	Ib cheeb tsam input
3	Ob chav zones nrog tamper
4	Ob chav zones inputs

Cov lus piav qhia LED

Lub module muaj xws li ib lub plawv dhia xiav LED los qhia tias lub module muaj lub zog thiab qhia lub module lub xeev tam sim no.

Flash txawv	Muaj nuj nqi
Flashes ib zaug txhua 1 sec	Lub xeev qub: Qhia txog kev ua haujlwm li qub.
3 ceev flashes txhua 1 sec	Kev sib txuas lus yuam kev xeev: Qhia (lub module nyob hauv "tsis muaj kev sib txuas lus") ua rau muaj kev sib txuas lus SDI2 yuam kev.
ON Steady	LED teeb meem xeev: module tsis powered (rau OFF Steady nkaus xwb) qhov chaw nyob yog 0 ntawm kaum thiab ib qho (rau ON Steady nkaus xwb) qee qhov teeb meem lwm yam txwv tsis pub lub module los ntawm con trolling lub plawv dhia LED
OFF Steady

Firmware version

Txhawm rau qhia cov firmware version siv tus qauv LED flash:

• Yog xaiv tau tamper hloov yog ntsia:
  • Nrog lub qhov rooj qhib qhib, qhib lub tamper hloov (thawb thiab tso qhov hloov).
• Yog xaiv tau tamper hloov tsis tau ntsia:
  • Momentarily luv lub tampua pins.

Thaum lub tamper hloov yog qhib, lub plawv dhia LED nyob twj ywm OFF rau 3 vib nas this ua ntej qhia lub firmware version. Lub LED pulses qhov loj, me, thiab micro tus lej ntawm lub firmware version, nrog rau 1 thib ob nres tom qab txhua tus lej.

Example:
Version 1.4.3 qhia li LED flashes: [3 thib ob ncua] *___****___*** [3 thib ob ncua, tom qab ntawd ua haujlwm ib txwm].

Cov ntaub ntawv technical

Hluav taws xob

Kev siv tam sim no (mA)	30 mA
Nominal voltage (VDC)	12 VDC
Tso zis voltage (VDC)	12 VDC

Neeg kho tshuab

Qhov Loj (H x W x D) (mm)

73.5 mm x 127 mm x 15.25 mm

Ib puag ncig

Ua haujlwm kub (°C)	0 ° C	—50	°C
Kev khiav hauj lwm txheeb ze humidity, non-condensing (%)	5% -	93%

Kev sib txuas

Loop inputs	Input contacts tej zaum yuav Nquag Qhib (NO) lossis Nquag Kaw (NC). CEEB TOOM! Nquag Kaw (NC) tsis raug tso cai hauv kev teeb tsa hluav taws.
Loop End-of-Line (EOL) tsis kam	1 kΩ, 1.5 kΩ, 2.2 kΩ, 3.3 kΩ, 3.9 kΩ, 4.7 kΩ, 5.6 kΩ, 6.8 kΩ, 10 kΩ, 12 kΩ, 22 kΩ, Tsis muaj EOL
	Split EOL3k3 / 6k8 nrog tamper
	Split EOL3k3 / 6k8

Loop thaiv kev tiv thaiv	100 Ω siab tshaj plaws
Terminal hlau loj	12 AWG to 22 AWG (2 mm to 0.65 mm)
SDI 2 kab	Qhov siab tshaj plaws nyob deb - Hlau loj (Un-shielded hlau nkaus xwb): 1000 ft (305 m) - 22 AWG (0.65 hli) 1000 ft (305 m) - 18 AWG (1.02 hli)

• Bosch Security Systems BV
• Torenallee 49
• 5617 IB Eindhoven
• Netherlands
• www.boschsecurity.com
• © Bosch Security Systems BV, 2024

Tsim cov kev daws teeb meem rau lub neej zoo dua

• 2024-06 : kuv
• v 01
• F.01U.424.842
• 202409300554

FAQ

• Q: Kuv yuav ua li cas yog tias kuv yuav tsum tau hloov qhov chaw nyob tom qab lub hwj chim?
  • A: Yog tias koj hloov cov keyboards tom qab fais fab tuag, tig lub hwj chim mus rau lub module kom qhib qhov chaw tshiab.
• Q: Muaj pes tsawg B228 modules tuaj yeem nyob hauv ib qho system?
  • A: Yog tias siv ntau B228 modules, txhua qhov module yuav tsum muaj qhov chaw nyob sib txawv.

Cov ntaub ntawv / Cov ntaub ntawv

BOSCH B228 SDI2 8-Input, 2-Output Expansion Module [ua pdf] Daim ntawv qhia kev teeb tsa B228-V01, B228 SDI2 8 Input 2 Output Expansion Module, B228, SDI2 8 Input 2 Output Expansion Module, 8 Input 2 Output Expansion Module, Kev nthuav dav Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv