HMFOR A4 Vertical Shoe Rack with Marble Textured
Step-by-Step Assembly Guide
- Attach plates A to the bottom of vertical panel B using screws H. Repeat with another set of plates A and panel B. This step is to be done twice.
- Attach plates C to the bottom of vertical panel D using screws H. Repeat with another set of plates C and panel D. This step is to be done twice.
- Place vertical panels B and D upright and slide base plate E into the grooves at the bottom of the panels. Secure the base plate E with screws G.
- Position shelves F between the vertical panels and secure them using screws G. There should be a total of 21 screws G used in this step.
- If you have two sets, you can connect them by aligning the holes on the side of one unit with the corresponding holes on the other unit and securing them with connector K.
- To finalize the assembly, attach caps L to the bottom of the unit.
Parts
Insatallartion Instruction
Documents / Resources
 |
HMFOR A4 Vertical Shoe Rack with Marble Textured [pdf] Instruction Manual A4 Vertical Shoe Rack with Marble Textured, A4, Vertical Shoe Rack with Marble Textured, Shoe Rack with Marble Textured, Rack with Marble Textured, Marble Textured, Textured |