Hive Works 140564 Foodcube Slim Cladding Panels
Assembly Instructions
- Step 1
Screw DRESS PANEL SPACER (Feet) on to the bottom of each panel to ensure a level surface underneath. The feet/spacers should sit on top of the bottom lip.
Illustration: Shows the Dress Panel Spacer being attached to the panel. - Step 2
Hang each DRESS PANEL to the sides of the Foodcube (A, A, B & C). The dress panels with the outlet holes are placed on the sides where the Level setters are. Ensure the netting clips aren’t placed into the Foodcube when fitting the dress panels.
Illustration: Displays Dress Panels A and B being attached to the Foodcube. - Step 3
Screw PANEL CORNER TRIMS on to brace the side panels together. Ensure the predrilled holes align with the side panel holes.
Illustration: Shows the Panel Corner Trim being attached. - Step 4
Screw HOLE PANEL TRIMS on. You may choose to leave one off if you want easy access to the level setter. Place the netting clips into the Foodcube once all cladding panels are attached.
Illustration: Displays the Hole Panel Trim being attached.
Specifications
| Component | Description |
|---|---|
| Dress Panel Spacer | Feet for leveling the panel surface. |
| Dress Panel | Panels attached to the sides of the Foodcube. |
| Panel Corner Trim | Trims used to brace side panels together. |
| Hole Panel Trim | Trims used for panels with outlet holes. |
FAQ
What is the purpose of the Dress Panel Spacer?
The Dress Panel Spacer ensures a level surface underneath the panels.
Can I leave a Hole Panel Trim off?
Yes, you can leave one off if you need easy access to the level setter.
Where should the Dress Panels with outlet holes be placed?
They should be placed on the sides where the Level setters are.
Documents / Resources
 |
Hive Works 140564 Foodcube Slim Cladding Panels [pdf] Instructions 140564 Foodcube Slim Cladding Panels, 140564, Foodcube Slim Cladding Panels, Slim Cladding Panels, Cladding Panels, Panels |