HILTI FX 3-A Cordless Stud Fusion
Specifications
- Product Name: Cordless Stud Fusion – FX 3
- Material: Coated Steel
- Color: Black Steel
- Weight Capacity: Minimum 20kg / 44 lb
Product Usage Instructions
Initial Setup
- Check that all parts are included in the package.
- Insert the appropriate F-Code according to the material and size of the stud.
- Power on the device by pressing the designated button.
Stud Fusion Process
- Place the stud in the designated position.
- Select the appropriate settings based on the stud size and material.
- Initiate the fusion process by pressing the fusion button.
- Wait for the fusion process to complete.
Maintenance and Troubleshooting
- Regularly clean and inspect the device for any damage.
- If experiencing issues, refer to the CSF Technical Manual for troubleshooting steps.
- Contact HILTI Service for any repairs or maintenance requirements.
Preparation
Coated Steel
Black Steel
Operation
Troubleshooting
Operating Instruction Coated Steel
Dimension
 |
 |
 |
|
|
| F-BT-MR M6×L SN (4) | H.1 | M6 | 4-30 mm | 6 Nm |
| F-BT-MR M8×L SN (4) | H.1 | M8 | 4-30 mm | 6 Nm |
| F-BT-MR M6×L (6)
F-BT-MR M6×L SN (6) |
H.2 | M6 | 6-30 mm | 8 Nm |
| F-BT-MR M8×L (8)
F-BT-MR M8×L SN (8) |
H.3 | M8 | 8-30 mm | 20 Nm |
| F-BT-MR M10×L (10)
F-BT-MR M10×L SN (10) |
H.10 | M10 | 10-30 mm | 30 Nm |
| F-BT-MR M12×L (10)
F-BT-MR M12×L SN (10) |
H.10 | M12 | 10-30 mm | 30 Nm |
| F-BT-MR ⅜×L SN (⁵⁄₃₂) | H.1 | ⅜–16 UNC | ⁵⁄₃₂”-1⅛” | 5.9 lb-ft |
| F-BT-MR ⅜×L (⅜)
F-BT-MR ⅜×L SN (⅜) |
H.10 | ⅜–16 UNC | ⅜”-1⅛” | 22.1 lb-ft |
| F-BT-MR ½×L (⅜) | H.10 | ½–13 UNC | ⅜”-1⅛” | 22.1 lb-ft |
QR CODE
2457045 V1-01.2025
FAQ
- Q: What should I do if the device does not power on?
- A: Check the battery level and ensure it is properly charged. If the issue persists, contact HILTI Service for assistance.
- Q: Can I use this product for both steel and other materials?
- A: The product is designed for use with coated steel studs.
- Ensure to follow the recommended settings for different materials.
- Q: How often should I calibrate the device?
- A: Calibration frequency may vary based on usage. It is recommended to calibrate the device periodically or as per the maintenance guidelines provided in the manual.
Documents / Resources
 |
HILTI FX 3-A Cordless Stud Fusion [pdf] User Guide FX 3-A, 2457045, FX 3-A Cordless Stud Fusion, FX 3-A, Cordless Stud Fusion, Stud Fusion, Fusion |