HIKMICRO UD38456B MiniX Thermal Imager User Guide

Main Components and Parts
The MINI X Thermal Imager includes components such as the thermal camera lens, visual camera lens, power button, and various mounting options.

Operations (in APP)

Live View: Adjust temperature measurement parameters for accurate readings.

Measurement Tools: Add tools like center spot, hot spot, cold spot for specific measurements.
Palette Bar Level & Span: Highlight targets based on temperature range selected for palette bar.

FAQ

Q: How do I adjust the emissivity settings on the thermal imager?
A: In the HIKMICRO Viewer app, navigate to the parameters section and set the target emissivity for more accurate measurements.

Main Components

Main Parts

Surface Mount

Phone Mount

Tripod Mount

Charging

Install APP

Connect by Imager QR Code

Connect by Bluetooth

Using HIKMICRO Analyzer
www.hikmicrotech.com/en/industrial-proucts/hikmicro-analyzersoftware.html

Main 1 & 2 Components and Parts

Thermal imager.
Surface mount holder. Screws are not included.

Phone mount holder.
USB cable. USB-C to USB-C/USB-A.

Imager case.
Power button. Hold to power on/off.
Thermal camera lens.
Visual camera lens.
3 status indicators.
Focus ring.
USB-C port for charging and data transfering.
Mounting holes.

Indicators Status

3 indicators running from top to bottom
Thermal imager starting.
Indicators soild on
Number of solid indicators stands for remaining battery.
2 lower indicators flashing alternatively
Charging or battery exception occurs.
3 indicators running from bottom to top
Charging normally.

Imager Mounting

Surface Mount
Use surface mount holder.

On magnetic surfaces: attatch the holder directly.
On non-magnetic surfaces: screw the holder to the surface.
Use M3 screws (not included in box). Do Not place other objects on the imager.

Phone Mount
Use phone mount holder.

Tripod Mount
Use surface mount holder. Connect to a UNC 1/4″-20 tripod (not included in box).

Imager Charging

Use supplied USB cable to charge the imager.
Power input: 5 VDC, 2 A (power adapter is not included)

For the first time use, charge the imager for at least 1.5 hours in power-off status.

5 & 6 Mobile Device Connection

For connecting by Bluetooth, Bluetooth, Nearby Device, WLAN and Location permissions may be required.
For connecting by imager QR code, Camera and WLAN permissions may be required.

Required permissions for Android and iOS are different.
If the thermal imager is connected to other mobile device, disconnect first and retry.

Operations (in APP)

Live View

Parameters
Adjust the temperature measurement parameters for more accurate measurements.

Measurement
Add temperature measurement tools for specific measurements. Palette Bar Level & Span
Based on the selected temperatures for palette bar, the target of interest will be highlighted on the image.

Advanced Settings & Calibration

Image calibration helps to optimize image quality and temperature measurement accuracy. During the calibration, the image will pause briefly and you’ll hear a “click” as a shutter moves in front of the detector.
You can turn off the automatic calibration for smooth display. But keeping it off for a long time will cause image abnormal and temperature measurement inaccurate. In this case, you can use manual calibration instead.

Albums

Save Pictures to Phone
Go to Settings > General and switch on Save Pictures to Phone. The pictures captured in the App afterwords will be auto-saved to the phone album.

More

About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the
latest version of this Manual at the HIKMICRO website (www.hikmicrotech.com). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety regulations.

Technical Support

https://www.hikmicrotech.com/en/contact-us.html portal will help you as a HIKMICRO customer to get the most out of your HIKMICRO products. The portal gives you access to our support team, software and documentation, service contacts, etc.

Power Supply

The input voltage should meet the Limited Power Source (5 VDC, 2 A) according to the IEC61010-1 standard. Please refer to technical specifications for detailed information.
Make sure the plug is properly connected to the power socket.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.

Battery

The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
Dispose of used batteries according to the instructions.

Maintenance

If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.

Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.

Using Environment

Make sure the running environment meets the requirement of the device. The operating temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and humidity shall be 95% or less.

Place the device in a dry and well-ventilated environment.
DO NOT expose the device to high electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other bright light.

When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out.
The level of protection is IP 54.

Transportation

Keep the device in original or similar packaging while transporting it.

Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibility.
Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference.

Emergency

If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Calibration Service
Please contact the local dealer for information on maintenance points. For more detailed calibration services, please visit https://www.hikmicrotech.com/en/support/

Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities.

Trademarks

and other HIKMICRO trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Regulatory Information

These clauses apply only to the products bearing the corresponding mark or information.

EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Directive 2014/30/EU (EMCD), Directive 2014/35/EU(LVD), Directive 2011/65/EU (RoHS).
Hereby, Hangzhou Microimage Software Co., Ltd. declares that this device (refer to the label) is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.hikmicrotech.com/en/support/download-center/declaration-of-conformity/

Frequency Bands and Power
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to the following radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz): ≤19 dBm; Wi-Fi 5 GHz (5.15 GHz to 5.25 GHz): ≤17 dBm

Bluetooth 2.4 GHz (2.4 GHz to 2.4835 GHz): <10 dBm

RF Exposure Information: This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
For the device without a supplied power adapter, use the power adapter provided by a qualified manufacturer. Refer to the product specification for detailed power requirements.
Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES- 003 Compliance
This device meets the CAN ICES-003 (B) / NMB-003 (B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and

This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Hikmicro Industrial hikmicro_industrial HIKMICRO Industrial

www.hikmicrotech.com HIKMICRO
support@hikmicrotech.com

Documents / Resources

HIKMICRO UD38456B MiniX Thermal Imager [pdf] User Guide
UD38456B, UD38456B MiniX Thermal Imager, UD38456B, MiniX Thermal Imager, Thermal Imager, Imager

References

User Manual

HIKMICRO UD38456B MiniX Thermal Imager

Product Usage Instructions