UD36698B Handheld Thermal Camera
“
Product Information
Specifications
- Model: Eco&ECO-V Thermal Camera
- Input Voltage: 5 VDC, 2 A
- Power Source: Limited Power Source (according to IEC62368
standard) - Battery Type: Rechargeable, specific type as per
manufacturer
Product Usage Instructions
Safety Instructions
These instructions are essential to ensure safe usage of the
product and avoid any potential hazards. Please read them carefully
before operating the device.
Laws and Regulations
Ensure compliance with local electrical safety regulations when
using the product.
Transportation
When transporting the device, keep it in the original or similar
packaging. Retain all wrappers for future use. Do not transport the
device without the original wrapper to prevent damage.
Avoid dropping or subjecting the product to physical shock. Keep
it away from magnetic interference.
Power Supply
Ensure the input voltage meets the specified requirements (5
VDC, 2 A). Connect the plug securely to the power socket. Do not
overload the power adapter by connecting multiple devices.
Battery
Only replace the battery with the correct type to avoid risks of
explosion. Dispose of used batteries as per manufacturer’s
instructions. Do not expose the battery to extreme temperatures or
pressures.
For long-term storage, maintain the battery charge every six
months. Do not dismantle the built-in battery.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter a failure with the product
during transportation?
A: If a failure occurs, return the device to the factory with
its original packaging to prevent damage. Contact customer support
for assistance.
Q: Can I use a different power adapter than the one
provided?
A: It is recommended to use the power adapter provided by a
qualified manufacturer to ensure safety and proper functioning of
the device.
“`
ECO&ECO-V
Thermal Camera User Manual
Contact Us
Eco&Eco-V User Manual
Safety Instruction
SAFETY INSTRUCTION
The symbols that may be found in this document are defined as follows.
Symbol Danger Caution Note
Description
Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Provides additional information to emphasize or supplement important points of the main text.
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Please read all the safety information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
Keep the device in original or similar packaging while transporting it. Keep all wrappers after unpacking them for future use. In case of any failure occurred,
you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities. DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic interference.
Power Supply
Input voltage should meet the Limited Power Source (5 VDC, 2 A) according to the IEC62368 standard. Please refer to technical specifications for detailed information.
Make sure the plug is properly connected to the power socket. DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire
hazards caused by overload. Use the power adapter provided by a qualified manufacturer. Refer to the product
specification for detailed power requirements.
i
Eco&Eco-V User Manual
Safety Instruction
Battery
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Replace with the same or equivalent type only. Dispose of used batteries in conformance with the instructions provided by the battery manufacturer.
Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.
Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
Dispose of used batteries in conformance with the instructions provided by the battery manufacturer.
The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary.
For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur.
Use the battery provided by a qualified manufacturer. Refer to the product specification for detailed battery requirements.
DO NOT charge other battery types with the supplied charger. Confirm there is no flammable material within 2 m of the charger during charging.
DO NOT place the battery near heating or fire source. Avoid direct sunlight.
DO NOT swallow the battery to avoid chemical burns.
DO NOT place the battery in the reach of children. When the device is powered off and the battery is full, the time settings can be kept for
60 days. The standard adapter power supply is 5 V.
Maintenance
If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
Your camera will periodically perform a self-calibration to optimize image quality and measurement accuracy. In this process, the image will pause briefly and you will hear a “click” as a shutter moves in front of the detector. The self-calibration will be more frequent during start up or in very cold or hot environments. This is a normal part of operation to ensure optimum performance for your camera.
ii
Eco&Eco-V User Manual
Safety Instruction
Calibration Service
We recommend you send the device back for calibration once a year, and please contact the local dealer for the information on maintenance points. For more detailed calibration services, please refer to https://www.hikmicrotech.com/en/calibrationservices/2.
Using Environment
Make sure the running environment meets the requirement of the device. The operating temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and the operating humidity shall be 95% or less.
This device can only be safely used in the region below 2000 meters above the sea level. Place the device in a dry and well-ventilated environment. DO NOT expose the device to high electromagnetic radiation or dusty environments. DO NOT aim the lens at the sun or any other bright light. When any laser equipment is in use, make sure that the device lens is not exposed to the
laser beam, or it may burn out. DO NOT aim the lens at the sun or any other bright light. The device is suitable for indoor and outdoor uses, but do not expose it in wet
conditions. The level of protection is IP 54. The pollution degree is 2.
Technical Support
The https://www.hikmicrotech.com/en/contact-us.html portal will help you as a HIKMICRO customer to get the most out of your HIKMICRO products. The portal gives you access to our support team, software and documentation, service contacts, etc.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.
Laser Light Supplement Warning
Warning: The laser radiation emitted from the device can cause eye injuries, burning of skin or inflammable substances. Prevent eyes from direct laser. Before enabling the Light Supplement function, make sure no human or inflammable substances are in front of the laser lens. The wave length is 650 nm, and the power is less than 1 mW. The laser meets the IEC60825-1:2014 standard. Laser maintenance: It is not necessary to maintain the laser regularly. If the laser does not work, the laser assembly needs to be replaced in the factory under warranty. Keep the device power off when replacing laser assembly. Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
iii
Eco&Eco-V User Manual
Safety Instruction
radiation exposure.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE
The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any necessary export license requirements if you intend to transfer, export, re-export the thermal series products between different countries.
iv
Eco&Eco-V User Manual
CONTENTS
Contents
Chapter 1 Introduction ………………………………………………………………………………………. 1 Important Notice to User ………………………………………………………………………………….. 1 Main Function ………………………………………………………………………………………………….. 1 Appearance ……………………………………………………………………………………………………… 2
Chapter 2 Preparation ……………………………………………………………………………………….. 4 Charge Device ………………………………………………………………………………………………….. 4 Power On/Off …………………………………………………………………………………………………… 4 2.2.1 Set Auto Power-Off………………………………………………………………………………….4 2.2.2 Set Auto Sleep………………………………………………………………………………………… 5 Live View …………………………………………………………………………………………………………. 5
Chapter 3 Display Settings …………………………………………………………………………………. 6 Set Image Modes …………………………………………………………………………………………….. 6 Set Palettes ……………………………………………………………………………………………………… 6 Set Level & Span ………………………………………………………………………………………………. 7 Color Distribution………………………………………………………………………………………………7 Display On-Screen Info………………………………………………………………………………………8
Chapter 4 Temperature Measurement ………………………………………………………………….. 9 Set Temperature Measurement Parameters ……………………………………………………… 9 Set Measurement Tools…………………………………………………………………………………….9 Set Temperature Alarm……………………………………………………………………………………10
Chapter 5 Capture and Manage Snapshots ………………………………………………………….. 11 Capture Snapshots………………………………………………………………………………………….11 View Snapshots ………………………………………………………………………………………………11 Export Snapshots ……………………………………………………………………………………………11
v
Eco&Eco-V User Manual
Contents
Chapter 6 Cast Device Screen to PC …………………………………………………………………… 12 Chapter 7 Maintenance ……………………………………………………………………………………. 13
Set Time and Date …………………………………………………………………………………………..13 Set Language ………………………………………………………………………………………………….13 Save Operation logs ………………………………………………………………………………………..13 Format Storage……………………………………………………………………………………………….13 View Device Information………………………………………………………………………………….13 Upgrade ………………………………………………………………………………………………………….13 Restore Device………………………………………………………………………………………………..14 Chapter 8 FAQ………………………………………………………………………………………………… 15 Frequently Asked Questions (FAQ)…………………………………………………………………..15
vi
Eco&Eco-V User Manual
Introduction
CHAPTER 1 INTRODUCTION
Important Notice to User
This manual describes and explains the features for multiple camera models. Because the camera models of a series have different features, this manual may contain descriptions and explanations that do not apply to your particular camera model.
Not all the camera models of a series support the mobile applications, software, and all their functions mentioned (or not mentioned) in this manual. Please refer to the user manuals of the application and software for more detailed information.
This manual is updated on a regular basis. It means that this manual may not contain the information about the new features of the latest firmware, mobile clients, and software.
Main Function
Temperature Measurement Device detects the real-time temperature, and displays it on the screen. Palettes Device supports multiple palettes, and you can choose different palettes for vivid image. SuperIR Device supports SuperIR to enhance the object outlines for better image display. Client Software Connection
HIKMICRO Analyzer UVC Alarm Client
Download HIKMICRO Analyzer (https://www.hikmicrotech.com/en/industrialproducts/hikmicro-analyzer-software.html) to analyze pictures.
Download the UVC alarm client (https://www.hikmicrotech.com/en/industrialproducts/uvc-client/) to cast the real-time live view of the camera.
NOTE
Not all the camera models of this series support the mobile applications, software, and all their functions mentioned (or not mentioned) in this manual. Please refer to the user manuals of the application and software for more detailed information.
01
Eco&Eco-V User Manual
Introduction
Appearance
The appearances and components of camera models might be different. Please refer to the actual products.
No.
Component
Function
1
Charging Indicator
Solid Red: Charging. Solid Green: Fully charged.
2
Wrist Strap Hole
Mount the wrist strap.
3
Tripod Mount
Connect to UNC 1/4″-20 tripod.
02
Eco&Eco-V User Manual
4
Type-C Interface
5
Laser
6
Thermal Lens
7*
Visual Lens*
8
Trigger
Introduction
Charge the battery or export files. Locate the target position with laser light. View the thermal image. View the visual image (only supported by certain models). In live view: Press: Capture snapshots. Hold: Locate the target with laser light, and release
to capture snapshots. In menu mode, press the trigger to go back to live view.
Button
Function Hold: Power On/Off Press: Display menu or confirm operation.
Exit the menu or return to previous menu.
In menu mode: Press
In live view mode: Press certain models). Press
and
to select parameters.
to switch image modes (only supported by to switch palettes.
NOTE
The appearance and button functions vary according to different models. The visual lens is only supported by certain models. Please refer to the actual
device or datasheet. The warning sign is beside the laser and on the left side of the device.
Warning:
The laser radiation emitted from the device can cause eye injuries, burning of skin or inflammable substances. Prevent eyes from direct laser. Before enabling the Light Supplement function, make sure no human or inflammable substances are in front of the laser lens. The wave length is 650 nm, and the power is less than 1 mW. The laser meets the IEC60825-1:2014 standard.
03
Eco&Eco-V User Manual
Preparation
CHAPTER 2 PREPARATION
Charge Device
Plug in the included USB cable, and connect the device to the power supply via a power adapter to charge the device. Do not use the USB-C to USB-C cable of other manufacturers.
The power adapter (not included) should meet the following standards: Output Voltage/Current: 5 VDC/2 A Minimum Power Output: 10 W
Check the power indicator for the charging status: Solid red: charging normally Flashing red: charging exception Solid green: fully charged
NOTE
The device is equipped with the built-in battery. For the first charge, charge the device for more than 3 hours when the device is turned on.
If the camera is not in use for an extended period and is over-discharged, it is recommended to charge for at least 30 min before powering it on.
It is recommended to use the USB cable included in the package for both charging and data transfer.
Power On/Off
Power On
Hold
for over six seconds to turn on the device. You can observe the target when the
interface of the device is stable.
NOTE It may take at least 30 s until the device is ready for using after you power on it.
Power Off
When the device is turned on, hold
for about six seconds to power off the device.
2.2.1 Set Auto Power-Off
In the live view interface, press , and go to More Settings > Auto Power-off to set the automatic shutdown time for device as required.
04
Eco&Eco-V User Manual
Preparation
2.2.2 Set Auto Sleep
In live view interface, press , and go to More Settings > Auto Sleep to set the waiting time before auto sleep. When there is no button pressing on the device for more than the set waiting time, the device enters sleep mode automatically. Press a button to wake the device up.
Live View
Real-Time Temperature
Center Temperature
Status Icons
Min. Temperature
Display Temperature Range
Max. Temperature
NOTE
Because this manual is updated on a regular basis, the live view might be slightly different from the version of your particular camera model. Please refer to the actual camera.
Your camera will periodically perform a self-calibration to optimize image quality and measurement accuracy. In this process, the image will pause briefly and you’ll hear a “click” as a shutter moves in front of the detector. The prompt “Image Calibrating …” appears in the upper center of the screen as the device is calibrating itself. The self-calibration will be more frequent during start up or in very cold or hot environments.
05
Eco&Eco-V User Manual
Preparation
CHAPTER 3 DISPLAY SETTINGS
Set Image Modes
You can set image modes of the device. Image Mode is only supported by certain models. Please refer to the actual device or the datasheet.
1. Select an image mode by the following ways:
Go to Settings > Image Settings > Image Mode, and select a preferred image mode.
Press
in live view to switch image modes.
Image Mode Description
Example
Thermal
In thermal mode, the device displays the thermal view.
Fusion Visual
Thermal object image with visual outlines. This function is only supported by the models with visual lens.
Visual object image only. This function is only supported by the models with visual lens.
2. When selecting the fusion mode, you need to select the distance in Image Settings > Parallax Correction according to the distance to the target, so as to better overlap the thermal and visual images.
3. Press
to save and exit.
Set Palettes
The palettes allow you to select the desired colors. You can switch palettes by the
following ways:
Go to Settings > Palettes to select a preferred palette, and press
to save and exit.
06
Eco&Eco-V User Manual
Press
in live view to switch palettes.
Preparation
Black Hot
White Hot
Rainbow
Ironbow
Fusion
Red Hot
Set Level & Span
Set a display temperature range and palette only works for targets within the temperature range. You can get better image contrast by adjusting the level & span parameters.
1. In the live view interface, press
to show the menu.
2. Press , and select Level & Span.
3. Select Setting Mode, and press
to switch auto and manual adjustment.
In Auto mode, the device adjusts display temperature range automatically.
In Manual mode, select Parameters to enter the setting interface. Press
to lock
or unlock the max. temperature and min. temperature, and press to adjust
unlocked value. Or, unlock the max. temperature and min. temperature, and press to increase or decrease the individual values while remaining the same temperature range.
4. Press
to save and exit.
Color Distribution
Color distribution function provides different image display effects in auto level & span. Linear and histogram color distribution modes can be selected for different application scenes. 1. Go to Image Settings > Color Distribution. 2. Select a color distribution mode.
07
Eco&Eco-V User Manual
Preparation
Mode
Description
Example
Linear
Linear mode is used to detect small high temperature targets in low temperature background. Linear color distribution enhances and displays more details of high temperature targets, which is good for checking small high temperature defective areas such as cable connectors.
Histogram
Histogram mode is used to detect temperature distribution in large areas. Histogram color distribution enhances high temperature targets and remains some details of low temperature objects in the area, which is good for discovering small low temperature targets such as cracks.
NOTE This function is only supported in auto level & span.
Display On-Screen Info
Go to Settings > Display Settings to turn on/off the information on-screen display. Parameters: Temperature measurement parameters, for example, target emissivity,
temperature unit, etc. Brand Logo: The brand logo is a manufacturer logo displayed at the middle bottom of
the screen.
08
Eco&Eco-V User Manual
Temperature Measurement
CHAPTER 4 TEMPERATURE MEASUREMENT
The temperature measurement function provides the real-time temperature of the scene. The device displays the measurement results on the left of your screen. This function is turned on by default.
Set Temperature Measurement Parameters
You can set temperature measurement parameters to improve the accuracy of temperature measurement.
1. In the live view interface, press
to show the menu.
2. Press to select desired parameters.
Temperature Range: Select the temperature measurement range. The device can
detect the temperature and switch temperature measurement range automatically in
Auto Switch mode.
Emissivity: Enable Custom, and select Emissivity to set the emissivity of the target as
the effectiveness in emitting energy as thermal radiation by pressing . Or you can
select a preset emissivity.
Distance: Set the distance between the target and the device.
Unit: Go to Display Settings > Unit, and press
to set the temperature unit.
3. Press
to save and exit.
Set Measurement Tools
Device measures the temperature of the whole scene and can be managed to display the center, hot, and cold spot in the scene.
1. In the live view interface, press
to show the menu.
2. Press to select Display Settings.
3. Select the desired spots to show their temperatures, and press
to enable them.
Hot: Display the hot spot in the scene and show the max. temperature.
Cold: Display the cold spot in the scene and show the min. temperature.
Center: Display the center spot in the scene and show the center temperature.
4. Press
to save and exit.
Result
The device shows the real-time temperature on the upper left side of live view interface.
09
Eco&Eco-V User Manual
Temperature Measurement
Set Temperature Alarm
Set the alarm rules and the device will alarm when the temperature triggers the rule.
1. In the live view interface, press
to show the menu.
2. Press , and select Alarm.
3. Press
to enable the function.
4. Select Measurement to set the alarm rule. Select Alarm Threshold to set the threshold temperature.
5. Press
to save and exit.
Configure the alarm rules
· Set the alarm rule as Less Than or More than.
· Set the threshold temperature for triggering the alarm.
Measure target temperature
· Aim the camera at the target in live view to measure the temperature.
Output Alarms
· When the target temperature is more than/less than the threhold temperature, the temperature readout on the left top of live view will be marked red/blue.
010
Eco&Eco-V User Manual
Capture and Manage Snapshots
CHAPTER 5 CAPTURE AND MANAGE SNAPSHOTS
Capture Snapshots
You can capture snapshots in live view. The snapshot will be automatically saved in the albums.
1. In the live view interface, you can capture snapshots by the following ways:
Press the trigger in live view to capture snapshots.
Hold the trigger in live view to locate the target with laser light, and release the trigger
to capture snapshots.
NOTE
Go to More Settings > Laser to turn on/off laser light. You cannot capture snapshots when the device is connected with PC.
2. Optional: Go to Settings > SuperIR, and enable SuperIR in the menu before capturing to enhance the object outlines on snapshots.
3. Optional: If a visual image is needed to be saved separately, enable Save Visual Image in Settings > Capture Settings (only supported by the models with visual lens).
View Snapshots
1. In the live view interface, press
2. ess
to enter the album.
to show the menu.
3. Press to select the picture, and press
to view it.
4. Optional: Press
the picture.
5. Press
to exit.
to delete picture in picture view interface. Press
to switch
Export Snapshots
1. Connect the device to your PC with the supplied USB cable, and select USB Drive mode in the prompt on device.
2. Open the detected disk, copy and paste the files to PC to view the files. 3. Disconnect the device from your PC.
NOTE For the first connection, the driver will be installed automatically.
011
Eco&Eco-V User Manual
Cast Screen
CHAPTER 6 CAST DEVICE SCREEN TO PC
The device supports casting screen to PC by UVC protocol-based client software or player. You can connect the device to your PC via the included USB cable, and cast the real-time live view of the device to your PC. 1. Download the UVC protocol-based client software from our official website:
https://www.hikmicrotech.com/en/industrial-products/uvc-client/ 2. Connect the device to your PC via the included USB cable, and select USB Cast Screen
in the prompt on the device as the USB mode. Exporting files via USB connection is not allowed when you are casting the screen. 3. Open UVC Alarm Client on your PC
012
Eco&Eco-V User Manual
Maintenance
CHAPTER 7 MAINTENANCE
Set Time and Date
In the live view interface, press information.
and go to Display Settings > Time and Date to set the
Set Language
Go to More Settings > Language to select a required language.
Save Operation logs
The device can collect its operation logs and save in the storage only for troubleshooting. You can turn on/off this function in Settings > More Settings > Save Logs. You can connect the camera to PC using the supplied USB cable, and select USB Drive as the USB mode on camera to export the operation logs in the root directory of the camera, if necessary.
Format Storage
1. In the live view interface, press
and go to More Settings > Format Storage.
2. Press
and select OK to start formatting storage.
NOTE Format storage before first use.
View Device Information
Go to More Settings > About to view the detailed information of the camera, such as firmware version, serial number, etc.
Upgrade
Before You Start: Download the upgrade file from the official website first.
013
Eco&Eco-V User Manual
Maintenance
1. Connect the device to your PC via the included USB cable, and select USB Drive as the USB mode in the prompt on the device.
2. Copy the upgrade file and replace it to the root directory of the device.
3. Disconnect the device from your PC.
4. Reboot the device and then it will upgrade automatically. The upgrading process will be displayed in the main interface.
NOTE After the upgrading, the device automatically reboot. You can view the current version
in More Settings > About.
Restore Device
In the live view interface, press
and go to More Settings > Restore Device to initialize
the device and restore default settings.
014
Eco&Eco-V User Manual
FAQ
CHAPTER 8 FAQ
Frequently Asked Questions (FAQ)
Scan the following QR code to get device common FAQ.
015
Eco&Eco-V User Manual
Legal Information
LEGAL INFORMATION
© Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the HIKMICRO website (http://www.hikmicrotech.com). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks
and other HIKMICRO’s trademarks and logos are the
properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
016
Eco&Eco-V User Manual
Legal Information
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
017
Eco&Eco-V User Manual
Legal Information
REGULATORY INFORMATION
These clauses apply only to the products bearing the corresponding mark or information.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Directive 2014/30/EU (EMCD) and Directive 2011/65/EU (RoHS).
Note: The products with the input voltage of within 50 to 1000 VAC or 75 to 1500 VDC comply with Directive 2014/35/EU (LVD), and the rest products comply with Directive 2001/95/EC (GPSD). Please check the specific power supply information for reference.
For the device without a supplied power adapter, use the power adapter provided by a qualified manufacturer. Refer to the product specification for detailed power requirements.
For the device without a supplied battery, use the battery provided by a qualified manufacturer. Refer to the product specification for detailed battery requirements.
Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003 (B) standards requirements.
Conformité Industrie Canada ICES-003
Cet appareil répond aux exigences des normes CAN ICES-003 (B)/NMB-003 (B).
018
Eco&Eco-V User Manual
Legal Information
KC
B
:
(B )
,
.
INFORMATIONEN FÜR PRIVATE HAUSHALTE
1. Getrennte Erfassung von Altgeräten:
Elektro- und Elektronikgeräte, die zu Abfall geworden sind, werden als Altgeräte bezeichnet. Besitzer von Altgeräten haben diese einer vom unsortierten Siedlungsabfall getrennten Erfassung zuzuführen. Altgeräte gehören insbesondere nicht in den Hausmüll, sondern in spezielle Sammel- und Rückgabesysteme.
2. Batterien und Akkus sowie Lampen:
Besitzer von Altgeräten haben Altbatterien und Altakkumulatoren, die nicht vom Altgerät umschlossen sind, die zerstörungsfrei aus dem Altgerät entnommen werden können, im Regelfall vor der Abgabe an einer Erfassungsstelle vom Altgerät zu trennen. Dies gilt nicht, soweit Altgeräte einer Vorbereitung zur Wiederverwendung unter Beteiligung eines öffentlich-rechtlichen Entsorgungsträgers zugeführt werden.
3. Möglichkeiten der Rückgabe von Altgeräten:
Besitzer von Altgeräten aus privaten Haushalten können diese bei den Sammelstellen der öffentlich-rechtlichen Entsorgungsträger oder bei den von Herstellern oder Vertreibern im Sinne des ElektroG eingerichteten Rücknahmestellen unentgeltlich abgeben. Rücknahmepflichtig sind Geschäfte mit einer Verkaufsfläche von mindestens 400 m² für Elektro- und Elektronikgeräte sowie diejenigen Lebensmittelgeschäfte mit einer Gesamtverkaufsfläche von mindestens 800 m², die mehrmals pro Jahr oder dauerhaft Elektro- und Elektronikgeräte anbieten und auf dem Markt bereitstellen. Dies gilt auch bei Vertrieb unter Verwendung von Fernkommunikationsmitteln, wenn die Lager- und Versandflächen für Elektro- und Elektronikgeräte mindestens 400 m² betragen oder die gesamten Lager- und Versandflächen mindestens 800 m² betragen. Vertreiber haben die Rücknahme grundsätzlich durch geeignete Rückgabemöglichkeiten in zumutbarer Entfernung zum jeweiligen Endnutzer zu gewährleisten. Die Möglichkeit der unentgeltlichen Rückgabe eines Altgerätes besteht bei rücknahmepflichtigen Vertreibern unter anderem dann, wenn ein neues gleichartiges Gerät, das im Wesentlichen die gleichen Funktionen erfüllt, an einen Endnutzer abgegeben wird.
4. Datenschutz-Hinweis:
Altgeräte enthalten häufig sensible personenbezogene Daten. Dies gilt insbesondere für Geräte der Informations- und Telekommunikationstechnik wie Computer und Smartphones. Bitte beachten Sie in Ihrem eigenen Interesse, dass für die Löschung der Daten auf den zu entsorgenden Altgeräten jeder Endnutzer selbst verantwortlich ist.
5. Bedeutung des Symbols ,,durchgestrichene Mülltonne”:
Das auf Elektro- und Elektronikgeräten regelmäßig abgebildete Symbol einer durchgestrichenen Mülltonne weist darauf hin, dass das jeweilige Gerät am Ende seiner Lebensdauer getrennt vom unsortierten Siedlungsabfall zu erfassen ist.
019
HIKMICRO Thermography hikmicro_thermography
Support@hikmicrotech.com HIKMICRO
HIKMICRO Thermography https://www.hikmicrotech.com/
UD36698B
Documents / Resources
 |
HIKMICRO UD36698B Handheld Thermal Camera [pdf] User Manual UD36698B, UD36698B Handheld Thermal Camera, Handheld Thermal Camera, Thermal Camera, Camera |
