HID Global iClass Credentials Smart Card
Contents
hide
iCLASS Memory Size and Allocation (Select one option)
- O – 2k Bits (256 Bytes) with 2 Application Areas
- 3 – 32k Bits (4K Bytes) Application areas 16k/2+16k/1
- 4 – 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS Programming (Select one option)
- HP – Programmed with Security Identity Object (SI0)
and standard iCLASS Access Control Application (Recommended)1 - P – Programmed with standard iCLASS Access Control Application
- C – Unprogrammed, for use with iCLASS SE Encoder
Front Packaging (Select one option)
- G – Plain White with Gloss Finish
- C – Custom Artwork with Gloss Finish – Specify Custom Artwork Number2
Back Packaging (Select one option)
- G – Plain White with Gloss Finish3
- C – Custom Artwork with Gloss Finish – Specify Custom Artwork Number2
- 1 – Plain White with Gloss Finish with Magnetic Stripe3
- 3 – Custom Artwork with Gloss Finish with Magnetic Stripe – Specify Custom Artwork Number2
Card Numbering4 (Select one option)
- M – Sequential Matching Encoded/Printed ( lnkjetted)8
- N – No Printed Card Numbering
- S – Sequential Encoded/Sequential Non-Matching Printed ( lnkjetted)7
- R – Random Encoded/Non-Matching Sequential Printed ( lnkjetted)7
- A – Sequential Matching Encoded/Printed ( Laser Engraved)
- B – Sequential Encoded/Sequential Non-M,atching Printed (Laser Engraved)
- C – Random Encoded/Non-Matching Sequential Printed (Laser Engraved)
Slot Punch5 (Select one option)
- N – No slot punch, This card can be slotted vertically, Printed Vertical Slot Indicators
- B – No Slot Punch, This card can be slotted horizontally, Printed Horizontal Slot lndicators7
- V – Vertical Slot Punch
- H – Horizontal Slot Punch6
Dimension
Y – iCLASS Program1ming
12345 = Card ID Nu1mber
YYYYYYYY-YY = Sales Order Number
Option – Custom Artwork2
- (Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 2000HPGGN
|
Final Part Number |
– |
(Options #) |
iCLASS Card Programming Information
|
Format Number |
Field Name(s) e.g. Facility Code | Value |
QTY |
|
HID Elite ICE # |
| Encoded Start Number | Encoded Stop Number |
| Printed Start Number | Printed Stop Number |
- Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example: 2000PGGNN
- For new artwork files. contact Customer Service for custom artwork number, lead-t imes, and cost.
- Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details. - The Printed card number is placed in the bottom right-hand corner on the back of the card.
- Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
- The ability to add a horizontal slot punch requires a different iCLASS antenna, design. Users can expect a read range reduction of approximately 20% if they order option H for the Slot Punch.
- Please note that cards shipped within the Americas are always laser-engraved. lnkjetted option is not available for these cards.
•The composite construction is recommended for all cards with over-laminate applied. Consult with t he printer manufacturer prior to ordering.
Documents / Resources
 |
HID Global iClass Credentials Smart Card [pdf] Instructions iClass Credentials Smart Card, Smart Card, iClass Credentials, Card, Credentials, iClass |
