1 परिचय
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. सुरक्षा जानकारी
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- स्थापना के दौरान हमेशा उचित सुरक्षा उपकरण, जैसे कि सुरक्षा चश्मे, पहनें।
- Use only the tools specified in the installation guide.
- छोटे भागों को बच्चों से दूर रखें।
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. पैकेज सामग्री
स्थापना शुरू करने से पहले सत्यापित करें कि सभी घटक मौजूद हैं:
- बाहरी हैंडलसेट असेंबली
- Interior Accent Lever Assembly
- कुंडी तंत्र
- स्ट्राइक प्लेट
- माउंटिंग स्क्रू और फास्टनर
- स्थापना टेम्पलेट (यदि शामिल है)
- कुंजियाँ (यदि लागू हो)
4. सेटअप और इंस्टालेशन
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 दरवाजे की तैयारी
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 स्ट्राइक प्लेट स्थापित करना
- स्ट्राइक प्लेट को दरवाजे के फ्रेम पर लगे लैच बोल्ट के साथ संरेखित करें।
- Mark and chisel out the necessary area for a flush fit, if required.
- स्ट्राइक प्लेट को दिए गए स्क्रू से सुरक्षित करें।
5. संचालन निर्देश
To operate your Schlage Addison Handleset:
- बंद करना: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- खोलने के लिये: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- को खोलने के लिए: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. रखरखाव
Proper maintenance ensures the longevity and smooth operation of your handleset.
- सफाई: हैंडलसेट को नियमित रूप से मुलायम कपड़े से साफ करेंamp कपड़े पर रगड़ें। घर्षणकारी क्लीनर, सॉल्वैंट्स या कठोर रसायनों के इस्तेमाल से बचें, क्योंकि ये फिनिश को नुकसान पहुँचा सकते हैं।
- स्नेहन: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- कसना: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7। समस्या निवारण
| संकट | संभावित कारण | समाधान |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| चाबी आसानी से नहीं घूमती | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| Door does not latch properly | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | Mounting screws are loose | सभी दिखाई देने वाले माउंटिंग स्क्रू को कस दें। |
8. विनिर्देश
- मॉडल संख्या: 163604
- ब्रांड: Schlage
- सामग्री: धातु
- रंग: साटन निकल धातु
- खत्म करना: साटन
- शैली: आधुनिक
- उत्पाद आयाम: 16.51 x 20.32 x 52.07 सेमी (6.5 x 8 x 20.5 इंच)
- आइटम का वजन: 2.04 किलोग्राम (4.5 पाउंड)
- हैंडल प्रकार: उत्तोलक
- विशेष विशेषता: Easy to Install, Patented adjustable bottom thru-bolt
- निर्माता: Allegion Canada Inc
- उद्गम देश: मेक्सिको
9. वारंटी और समर्थन
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webसाइट पर जाएं या अपने उत्पाद के साथ शामिल वारंटी कार्ड देखें।
अधिक सहायता के लिए कृपया देखें श्लेज स्टोर.
