Henrac Tech 8 zones Smart WiFi Irrigation Controller
Wiring diagram
Note
- To connect the power supply to the controller, connect the:
- Red/brown wire to the red wire of the controller.
- Black/blue wire to the black wire of the controller.
- To count the sent to and tele on the one it is enda Viet the Rema
- All smart irrigation controller comes with a spare 0.25 fuse.
- Most solenoid valves do not have a polarity when installing them, however, refer to the manufacturers.
- To connect your valves to an 8 & 12 zone controller, remove the top relay boards.
Before connecting your device to the app, power it on & see if there is a red LED flashing from the smart relay board, if there is a flashing LED, press & hold the reset button on the relay board for 5 seconds. If you have an 8 zone, you have to press the two relay boards to reset the button together. The same goes with the 12 zones, press all three reset buttons of the relay board together.
Step 1
Once you’ve confirmed a flashing red light, go onto the Smart Lifeor Tuya Smart app & tap on the ‘+’ icon to add your device.
Step 2
Step 3
Once you’ve tapped on the add device, the Smart irrigation controller should automatically be picked up as ‘433-3’. Tapontheblue add button. For the 8 zones, you should pick up 2 ‘433-3’, &for the 12 zones, you should pick up three ‘433-3’.
Step 4
When you’ve tapped the blue add button, it will ask you to enter your WiFi network to which the device will be connected. You can skip steps 5 – 8 if you are successful.
Step 5
If your mobile device does not support Bluetooth, scroll down to the smart devices Tuya offers. Go to the electrical section &findSwitch (WiFi).
Step 6
Confirm that the indicator light is rapidly blinking & proceed following page which will pair the device to your Smart Home.
Step 7
The device will pair with your application, the device will be added within 2 minutes, If failed, check your WiFi details & confirm is flashing rapidly.
Step 8
When the smart device pops up in pairing mode, tap on add, &confirm the WiFi network to which the device will be connected. To learn how to rename the device & switches [click here].
Step 9
Once your device has been added, it is time to test it. On your phone, go into your device & tap on any of the relay switches, Once you have tapped on the switches, you should see one of the relay switches red lights turned on. After that go ahead & press the switch button on the relay board, you should see on your phone that the relay switch is turned off.
Warranty
WARRANTY POLICY for REPLACEMENTS
Should any product ‘fail’ within the first 3 months of purchase the product may be returned to us for either a repair or replacement. From your nearest PostNet branch country requests the standard ‘PostNet to PostNet’ service. For more details regarding our return policy [click here].
IMPORTANT! Warranty void if
- Goods are not in original packaging & are complete with all original components.
- Goods show signs of damage due to abusive usage.
- Goods show signs of physical alteration.
- Goods show signs of physical damage.
- Goods show signs of tampering.
- Signs of power spike damage.
- Signs of water damage (besides waterproof products).
Documents / Resources
 |
Henrac Tech 8 zones Smart WiFi Irrigation Controller [pdf] User Manual 8 zones Smart WiFi Irrigation Controller, 8 zones, Smart WiFi Irrigation Controller, WiFi Irrigation Controller, Irrigation Controller, Controller |