HealTech Electronics Ltd EW Controller User Manual

HealTech Electronics Ltd EW Controller

Specifications

• Product: EW Controller
• Type: Programmable electric windscreen controller
• Compatibility: BMW R1300GS and R1300RT models
• Wiring: 6-wire wiring harness with high-quality quick connectors
• Device Compatibility: Android 5.0 (Lollipop) or newer
• Supply voltage: +8V to +20V
• Max. supply current at 12V: 150 mA
• Operating temp: -40°C to +80°C (-40°F to +176°F)
• Unit size: 50 x 37 x 17mm (1.96 x 1.45 x 0.66 inches)
• Reverse polarity and transient protection
• Waterproof (IP68)

Product Usage Instructions

App Download Links:
Compatible with Android devices running Android 5.0 (Lollipop) or newer. Download the latest ‘EW Controller’ app from the Google Play Store

Programmable electric windscreen controller

Foreword

• Congratulations on your purchase of an EW Controller module.
• The EW Controller is a programmable electric windscreen controller especially for the BMW R1300GS and R1300RT models. It comes with a 6-wire wiring harness and high-quality quick connectors.
• To make the installation as straightforward as possible, we offer bike-specific Supplementary Manuals. These are accessible through our website and also from the ‘EW Controller’ app.
• For more information on this product, please visit: www.healtech-electronics.com/EWC

Installation

Before starting the installation, please make sure the EWC module is compatible with your vehicle. Check compatibility by using the Product Advisor on our website. If your bike model is not listed yet, please contact us for advice.

Disclaimer:
Do not attempt to install the product if you don’t have basic mechanical skills. HealTech Electronics Ltd. and its distributors shall not be liable for any loss or damage caused by improper installation. If in doubt, please consult with your dealer.

1. Install the ‘EW Controller’ app from HealTech Electronics Ltd. on your phone.
2. Launch the app. Swipe left to reach the Main Menu. Tap the QuickStart menu button. Tap ‘No’ when asked whether you have installed the product.
3. Install the EWC module as per the illustrated installation guide.
4. After successful installation,n run the QuickStart from the app, but this time tap ‘Yes’ on the pop-up, as the EWC module is already installed.
5. Read and follow the app instructions carefully.

Devicocompatibility/application download links

Compatible with Android devices running Android 5.0 (Lollipop) or newer. To download the latest ‘EW Controller’ app, scan the QR code or visit the link below:

https://play.google.com/store/apps/details?id=com.healtech.ewc

Warranty

HealTech Electronics Ltd. guarantees this product against defects in material and workmanship for a period of two (2) years.

The warranty period starts from the date of the original purchase as shown on the invoice.

Regulatory certifications

EW Controller (EWC) User Manual [rev. 001]

www.healtech-electronics.com/EWC

FAQ