B39 Bluetooth Headset User Manual

B39 Bluetooth Headset

B39-Bluetooth-Headset-fig-1

Troubleshooting

  • Pairing doesn’t succeed: Pairing mode is maintained for 5 minutes. The manual notes that if pairing and connection are unsuccessful beyond 2 minutes, the headset automatically switches to stand-by mode.
  • Re-pairing not needed: After pairing is completed, the headset and the handset remember each other, without needing to pair again.

Product Parameters

B39-Bluetooth-Headset-fig-2

Pairing and Connection

  1. Keep the distance between the mobile phone and the headset within 1 m; the closer, the better.
  2. Press and hold the key B39-Bluetooth-Headset-fig-3 for about 5 seconds, and then release it when the red and blue lamps alternately blink. At this time, the headset has entered the pairing mode.
  3. Enable the Bluetooth function of the mobile phone, search for the Bluetooth device, and select “B39” for pairing and connection.
    After connection is successful, the blue indicating lamp of the headset slowly blinks.

Notes:

  • The pairing mode will be maintained for 5 minutes. If pairing and connection are unsuccessful beyond 2 minutes, the headset will automatically switch to the stand-by mode.
  • After pairing is completed, the headset and the handset will remember each other, without pairing.

Overview

B39-Bluetooth-Headset-fig-4

Documents / Resources

PDF thumbnailB39 Bluetooth Headset
User Manual · Headset, B39, Bluetooth headset

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.