HDWR Global HD29A Code Reader USB Stand included
Product Information
Supported Codes:
numbers, EAN 128, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 128, Code 128 Full ASCII, Codabar, Interleaved 2 of 5 (ITF), Discrete 2 of 5, Code 93, MSI, Code 11, RSS Variants, Chinese 2 of 5, MSI/PlesseyUK/PlesseyUCC/EAN 128 chinese codeIATAGS1 DataBarRSS
Product Usage Instructions
Features:
- Set contents
- Master codes
- Restore to factory settings
- Battery level
Barcode Scan Settings:
- Auto mode
- Manual mode
- Continuous mode
Standby Settings:
- Sleep after 2 seconds
- Sleep after 5 seconds (Default)
- Sleep after 10 seconds
- Sleep after 20 seconds
Beep Settings:
- High signal volume
- Average signal volume
- Low signal volume Sound muted
Adding ID as Prefix:
- Enabled
- Disabled
Setting End Characters:
- CR
- LF
- CR+LF
Prefix Setting:
- No end sign
- Displaying the prefix
- Displaying the prefix Disabled
Suffix Setting:
- Display the suffix
- Display the suffix Disabled
Case Settings:
- Suffix setting
- Letter Swapping Off (Default)
- Uppercase letters
- Lowercase
FAQs
Q: How do I change the barcode scan mode?
A: To change the barcode scan mode, navigate to the Barcode Scan Settings menu and select the desired mode (Auto, Manual, Continuous).
Q: How can I adjust the standby settings?
A: You can adjust the standby settings by selecting the appropriate sleep duration in the Standby Settings menu.
Q: What is the default beep setting?
A: The default beep setting is Sound muted. You can adjust the beep volume in the Beep Settings menu.
Specifications
- Warranty: 2 years
- Material: ABS + PC
- Light Source: 650nm Laser
- Scanning method: manual (on the button) / automatically (after bringing the code closer)
- Scan confirmation: LED and beep
- Scan speed: 200 scans per second
- Maximum resolution: 0.127 mm
- Current consumption: 85 mA
- Interface: USB
- Cable length: 200 cm
- Ingress protection: IP54
- Device dimensions: 16.5 x 6.5 x 9 cm
- Stand dimensions: 12 x 15 x 24 cm
- Package dimensions: 22 x 13 x 9 cm
- Device weight: 400 g
- Weight with packaging: 500 g
- Operating temperature: 0 to 45°C
- Storage temperature: -40 to 60°C
- Operating Humidity: 5 to 90%
- Storage Humidity: 5 to 90%
- Readable 1D codes: UPC/EAN, UPC/EAN with additional numbers, EAN 128, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 128, Code 128 Full ASCII, Codabar, Interleaved 2 of 5 (ITF), Discrete 2 of 5, Code 93, MSI, Code 11, RSS Variants, Chinese 2 of 5, MSI/Plessey, UK/Plessey, UCC/EAN 128, Chinese code, IATAGS1 DataBar（RSS).
Features
- Scan speed: 200 scans per second
- Scan confirmation: LED and beep
- Available interfaces: USB
- Ingress protection: IP54 rated
Set contents
- Reader
- USB cable
Master codes
Settings
Barcode Scan Settings
Standby settings
Beep settings:
Adding ID as Prefix:
Setting End Characters:
Prefix setting:
Suffix setting:
Case settings:
Numerical Codes
HDWR Global
hdwrglobal.com.
Documents / Resources
 |
HDWR Global HD29A Code Reader USB Stand included [pdf] User Manual HD29A, HD29A Code Reader, HD29A, Code Reader, Reader, HD29A Code Reader USB Stand included, HD29A, Code Reader USB Stand included, Reader USB Stand included, USB Stand included, Stand included, included |