HDWR Global AC400HF RFID Access Control Reader
Specifications
- Product Name: RFID Access Control Reader
- Model: SecureEntry-AC400HF
- Power Input: DC12V
- Color: Red, Black, Green, White, Yellow, Brown
- Output Formats: WG26, WG34
- Backlight Settings: Normally on, Normally off, On for 15 seconds
Product Usage Instructions
Set Contents:
The package should include the RFID Access Control Reader, necessary cables for connection, and a user manual.
Features
- Secure access control reader for RFID cards
- Connection ports for power input, data0, data1, beep, and LED
- Customizable output formats and backlight settings
Connection Diagram
| Lp. | Designation | Colour | Function |
|---|---|---|---|
| 1 | 12V | Red | DC12V Input |
| 2 | GND | Black | Power Supply GND |
| 3 | D0 | Green | Port D0 WG Port |
| 4 | D1 | White | Port D1 WG |
| 5 | BEEP | Yellow | Beep |
| 6 | LED | Brown | Light signal |
Output Format and Backlight Setting for the Keyboard:
- Entering setting mode: In standby mode, press and hold the # button for 5 seconds while the green LED is flashing.
- Enter the code to get the corresponding command (826 and 803 as the factory value):
826 (WG26 output format) / 834 (WG34 output format) – 801 (Backlight normally on) / 802 (Backlight normally off) / 803 (Backlight on for 15 seconds) - It will automatically exit the setting mode with a long beep if the data has been entered correctly. It will remain in the setting mode waiting for data to be re-entered with a short, triple-beep beep if incorrect data has been entered.
Note: Press the * button to exit the setting mode at any time.
Setting the Output Format for the Reader:
To set the output format for the reader, follow the steps provided in the “Output Format and Backlight Setting for the Keyboard” section above.
Specifications
- Warranty: 1 year
- Reading Distance: 5-10cm
- Device Type: Access control reader for RFID cards
- Verification Type: RFID Card, Password
- Operating frequency: 13,56 MHz
- Type of cards read: Mifare
- Response Speed: Less than 0.2 seconds
- Communication Distance: 100 m
- Data transfer: real-time
- Light signal: built-in LED (bi-color LED)
- Beep: Built-in speaker (buzzer)
- Audio-visual indication: when the registered card is placed against the reader, the red LED flashes green and a beep sounds
- Keyboard and keys: touch keyboard
- Resistance: protection against water ingress
- Voltage: DC 9V – 16V, standard 12DC
- Operating Current: 100mA
- Interface: Wiegand 26 output
- Operating Temperature: -20º C – 70º C
- Operating Humidity: 10%-90%
- Product dimensions: 12.3 x 8.4 x 2.3 cm
- Package dimensions: 18.5 x 13.9 x 5.5 cm
- Product weight: 200 g
- Product weight with packaging: 400 g
Set contents
- Access Control Reader with Wires
- Manual
Features
- The reader offers access by reading an RFID card with a frequency of 13,56 mHz or by means of an individual password.
- Made of durable materials and waterproof housing, the device can be mounted outdoors.
- The device is perfect for a wide variety of environments, such as companies, institutions, as well as private homes, making it a versatile solution for a wide range of users.
- The reader is equipped with a two-color LED and an audible signal that informs users about the authorization status, making it easier for users to understand the current access status.
- Thanks to the Wiegand 26 Output interface, the reader can be connected to external devices to form an access control system.
Connection diagram
|
Lp. |
Designation |
Colour |
Function |
Connection description |
|
1 |
12V |
red |
DC12V Input |
Connecting a 12V Host Intercom or
Power Supply |
|
2 |
GND |
black |
GND Power Supply |
GND connection of the intercom host or power
supply |
|
3 |
D0 |
Green |
Port D0 WG |
Connecting Data0 to the
controller |
| 4 | D1 | White | Port D1 WG | Connecting Data1
to the controller |
|
5 |
BEEP |
Yellow |
Beep |
Beep when connected to
GND |
|
6 |
LED |
brown |
Light signal |
Green light when connecting to
GND |
Output format and backlight setting for the keyboard
- Step 1. Entering setting mode (in standby mode, press and hold the # button for 5 seconds while the green LED is flashing)
- Step 2. Enter the code to get the corresponding command (826 and 803 as the factory value)
826 (WG26 output format) / 834 (WG34 output format)801(Backlight normally on) / 802(Backlight normally off) / 803(Backlight on for 15 seconds) - Step 3. It will automatically exit the setting mode with a long beep if the data has been entered correctly. It will remain in the setting mode, waiting for data to be re-entered with a short, triple-beep beep if incorrect data has been entered.
Note: Press the * button to exit the setting mode at any time.
Setting the output format for the reader
FAQs
- Q: How do I reset the reader to factory settings?
A: To reset the reader to factory settings, press and hold the * button for 10 seconds while powering on the device. - Q: Can I use this reader with different types of RFID cards?
A: Yes, this reader is compatible with most standard RFID cards operating at the supported frequency.
Documents / Resources
 |
HDWR Global AC400HF RFID Access Control Reader [pdf] User Manual AC400HF RFID Access Control Reader, AC400HF, RFID Access Control Reader, Access Control Reader, Control Reader |