Haxiot HXC900 Device Developer Kit Quick Setup Guide
Unpack Haxiot Device Developer Kit
Package includes
1 x Haxiot HXC Dev Shield w/ ST Nucleo
1 x USB Micro cable
1 x u.FL FPC antenna
1 x Quick start guide
Setup & Connect
The HXC Dev shield should be pre-installed on the ST Nucleo board with u.FL antenna
Connect the included USB micro cable from the Nucleo to a USB port or battery
IMPORTANT: The Gateway must be provisioned & activated before the Device Developer kit is activated
Enable Haxiot Cloud Service
- Ensure you have activated your Haxiot X-ON cloud account at https://signup.haxiot.com with the included activation code
- Ensure the Gateway is on & connected
Provisioning Device
Load scan.haxiot.com on your smartphone using the assigned Haxiot X-ON username and password.
Select the SCAN button to provision and test the HXC Dev shield using the QR code label on the device. Select “LoRaWAN Dev Kit App” in the drop-down.
The LED turns Purple when connected.
For a detailed user manual, please download the HXG3000 user manual from the Haxiot support site: support.haxiot.com, or contact
Caution: The Haxiot HXG3000 Indoor Gateway is a radio transmitting device. This device is for indoor use only.
Regulatory Notices:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
© All rights reserved. Haxiot Inc. Website: www.haxiot.com Support: support@haxiot.com
Address: 2500 Dallas Parkway #535, Plano TX 75093, USA
Documents / Resources
 |
haxiot HXC900 Device Developer Kit [pdf] User Guide HXC900, Device Developer Kit |
