Rochester Sensors 6318 Jr Wireless Dial Remote Read BLE Output Sensors

Nā Kūlana Huahana

• Product Name: 6318 Jr Wireless Dial
• Compatibility: ASME Tanks and DOT Cylinders
• Wireless Connection: Bluetooth Low Energy (BLE)
• Ke ola pākaukau: 10 makahiki
• Safety Requirements: Class 1 Div 1 for IECEx/ATEX/UKEX/CSA
• Compatible Gauges: Rochester Sensors standard 1.5 gauges

63 18 Jr Wireless Dial
Remote-read BLE output sensors for use with existing ASME Tanks and DOT Cylinders

• The 6318 Jr Wireless Dial provides a wireless connection between a gauge and the corresponding telemetry system. The self-contained dial reads from the gauge in the tank and broadcasts via a Bluetooth Low Energy (BLE) output to a telemetry system. The display of the dial is activated by tapping the sensor housing.
• The dial is designed to support a 10-year battery life. The 6318 Jr Wireless Dial can be replaced at the end of the service interval.
• The wireless operation simplifies installation and eliminates any issues with cable connection and subsequent damage during operation. The device conforms to similar intrinsic safety requirements as the 9700 Series Modules: Class 1 Div 1 for IECEx/ATEX/UKEX/CSA.
• The 6318 Jr Wireless Dial is compatible with Rochester Sensors standard 1.5” gauges including medium-duty spiral gauge. It is available in both a snap-on and screw-on versions to replace existing direct read and R3D junior dials.

Palapala noi

• The 6318 Jr Wireless Dial acquires level readings from a tank on 15 minute intervals. The sensor broadcasts via BLE every 2.2 seconds. This transmission occurs automatically and does not require pairing. The local LCD can be activated by tapping the housing. This will cause the device to take a reading and display the result for 10 seconds before turning the display off. A built-in delay before re-activating the display conserves power by ignoring false tapping inputs.

General Information and Features

• Nylon housing offers excellent mechanical properties and chemical resistance
• No exposed sensing elements, all components are located on the PCB inside the housing
• Ingress Protection: IP67 / IP69K rated
• Additional EMI/RFI Specifications TBD.
• Hiki ke hoʻonui i ka firmware ma luna o ka lewa

Nā Pōmaikaʻi Nui

• No exposed cables
• Ka manawa hoʻokomo wikiwiki
• Easy to read digital display shows tank volume in 1% increments
• ʻO ka hale paʻa paʻa
• Hoʻopau paʻa ʻia
• Field replaceable at end of lifetime

E. & O.E. ©Rochester Sensors.
Since the suitability of these products depends upon a wide range of factors not in our control, Rochester Sensors expects and understands that you conduct the testing and evaluation necessary to determine that these products are suitable for your application. While every effort is made to ensure the above details are correct at the time of printing, Rochester Sensors reserves the right to make mat erial changes, and or technical changes without notification.

LCD Status Indicators
The 6318 sensor is equipped with a 2-digit 7-segment LCD display. The LCD will show status codes to indicate different conditions. Some status codes are considered errors while some are considered warnings and will affect the level value system wide. Refer to each code for an expected behavior. Refer to Appendix A for all system errors and warnings.

• bL: Battery low. Battery is estimated to be within 1-2 years of expected end of life. The measured level will alternate on the LCD with this code.
• bC: Battery critical. Battery is estimated to be < 1 year of expected end of life. The measured level will alternate on the LCD with this code.
• Er: Device error. Device is not functioning correctly and electronics should be replaced. The level will be set to 0% and alternate with this code.
• Lo: Low or Low-Low Warning. Tank level is below expected operating range.
• Hi: High or High-High Warning. Tank level is above expected operating range.

Broadcast Protocol

PACKET TYPE 0x0101 – PRIMARY TELEMETRIC PACKET 2.2sec INTERVAL

Bytes	Payload Contents
0	Hae 0	BLE Protocol Specified
1	Hae 1	BLE Protocol Specified
2	Hae 2	BLE Protocol Specified
3	Ka lōʻihi	0x14
4	Type Flag (FF)	ʻIkepili kikoʻī o ka mea hana
5	MM – company id from bluetooth.com	0x0C (Company ID from Bluetooth.org)
6	MM – company id from bluetooth.com	0x7F (Company ID from Bluetooth.org)
7	Byte 1 RS device name	R
8	Byte 2 RS device name	O
9	Byte 3 RS device name	S
10	Byte 4 RS device name	0x63
11	Byte 5 RS device name	0x18
12	0x01 (identification of content type)	LSB
13	0x01 (identification of content type)	MSB
14	Kūlana	See status table
15	RAW DATA TYPE	0x00 = %
16	RAW DATA LSB1
17	RAW DATA MSB1
18	Mālama ʻia
19	Battery LSB	% Remaining = (MSB|LSB)/(0xFFFF)
20	Battery MSB
21	Mālama ʻia
22	Mālama ʻia
23	Manao	Valid range: 0x0A – 0x0F

Nānā 1. Possible ranges are 3% to 97% in 0.1% per bit increments

Palapala hōʻoia huahana
Rochester Sensors 6318 Jr Ble Dial is certified as intrinsically safe for class 1, Division 1, Groups C & D hazardous locations. Products are marked and approved by ETL, ATEX, UKCA, and CE.

Hazardous Locations Safety Standards

IEC 60079-0: 2017	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau *Note: For IECEx Certification
EN 60079-0: 2011 + C1: 2012	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" *Note: For IECEx Certification
EN 60079-0: 2018	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau *Note: For ATEX Certification
EN 60079-0: 2012	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" *Note: For ATEX Certification
UL 60079-11, 6th Ed., Hoʻopuka ʻia 03/26/2019	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau *Note: For USA listing Certification
UL 60079-11, 6th Ed., Hoʻohou 03/28/2014	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" *Note: For USA listing Certification
CSA C22.2 No. 60079-0: 2011	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau *Note: For Canada listing Certification
CSA C22.2 No. 6009-11: 2011	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" *Note: For Canada listing Certification

Loiloi Kaiapuni

ʻĀpana	Kūlana	Min	Maʻamau	Max	Unite
Ka Mahana Hana Kaulana	Kaulana Mahana	-40	–	80	°C
Module Accuracy		–	<1%	–	pae
UV withstand	600 hrs, UVA-340 @.76W/m2, 70°C	–
Haʻalulu	Mil STD-810: 5 Hz, 12.7mm AmpLitude, 1G, 45 minutes

Anana

 

ʻIke Kauoha
Contact your local sales representative for samples, availability, and pricing information.

Part Options:

Māhele Helu	Hoʻohālike
6318-01001	BLE Magnetic Dial, Vertical Tank, Bluetooth, Screw-on
6318-01002	BLE Magnetic Dial, Horizontal Tank, Bluetooth, Screw-on
6318-01003	BLE Magnetic Dial, Fractional, Bluetooth, Screw-on
6318-02001	BLE Magnetic Dial, Vertical Tank, Bluetooth, Snap-On
6318-02002	BLE Magnetic Dial, Horizontal Tank, Bluetooth, Snap-on
6318-02003	BLE Magnetic Dial, Fractional, Bluetooth, Snap-on
8318-02011	BLE Magnetic Dial, Spiral Gauge, Bluetooth, Snap-on

Hoʻokomo
See Document DS-02041

E like me 47 CFR §15.21
ʻO ka manual a ka mea hoʻohana a i ʻole ka palapala aʻo no ka radiator i manaʻo ʻole ʻia e makaʻala i ka mea hoʻohana e hoʻololi a hoʻololi ʻole ʻia e ka ʻaoʻao kuleana no ka hoʻokō e hiki ke hoʻopau i ka mana o ka mea hoʻohana e hana i nā mea hana. I nā hihia i hāʻawi ʻia ka manual ma kahi ʻano ʻē aʻe ma waho o ka pepa, e like me ka disk computer a i ʻole ma ka Pūnaewele, hiki ke hoʻokomo ʻia ka ʻike i koi ʻia e kēia ʻāpana i loko o ka manual ma kēlā ʻano ʻano ʻē aʻe, inā hiki ke manaʻo ʻia ka mea hoʻohana. i hiki ke komo i ka ʻike ma ia ʻano.

Nā ʻōlelo aʻoaʻo RF Exposure:
Hoʻopili kēia mea hana i nā palena hōʻike radiation FCC i hoʻonohonoho ʻia no kahi kaiapuni ʻole. Pono nā mea hoʻohana hope e hahai i nā ʻōlelo kuhikuhi kikoʻī no ka hoʻokō ʻana i ka hoʻolaha RF. Pono kēia transmitter ma kahi o 20 cm mai ka mea hoʻohana a ʻaʻole pono e hui pū ʻia a i ʻole e hana pū me kekahi antenna a i ʻole transmitter.
Hiki ke loli ka ʻike ma kēia alakaʻi me ka ʻole o ka hoʻolaha. ʻAʻohe kuleana o ka mea hana no nā hewa i ʻike ʻia ma kēia alakaʻi.

FCC Interference statement (Part 15.19)(a)(3)
Hoʻopili kēia mea hana i ka ʻāpana 15 o nā Rula FCC. Aia ka hana i nā kūlana ʻelua:

1. ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino, a
2. Pono kēia hāmeʻa e ʻae i nā hoʻopaʻapaʻa i loaʻa, me ka hoʻopili ʻana i hiki ke hana ʻole ʻia.

ʻŌlelo Hoʻopilikia FCC — MĀhele 15.105 (B)

Nānā:
Ua hoʻāʻo ʻia kēia mea hana a ua ʻike ʻia e hoʻokō i nā palena no kahi hāmeʻa kikohoʻe Papa B, e like me ka ʻāpana 15 o nā Rula FCC. Hoʻolālā ʻia kēia mau palena no ka hāʻawi ʻana i ka pale kūpono mai ka hoʻopilikia ʻino ʻana i kahi hoʻonohonoho hale. Hoʻohana, hoʻohana a hiki ke hoʻomālamalama i ka ikehu alapine lekiō a inā ʻaʻole i hoʻokomo ʻia a hoʻohana ʻia e like me nā kuhikuhi, hiki ke hoʻopilikia i nā kamaʻilio lekiō. Eia nō naʻe, ʻaʻohe mea e hōʻoiaʻiʻo ʻaʻole hiki ke keakea i kahi hoʻonohonoho. Inā hoʻopilikia kēia mea hana i ka lekiō a i ʻole ke kīwī, hiki ke hoʻoholo ʻia ma ka hoʻopau ʻana i nā mea hana, paipai ʻia ka mea hoʻohana e hoʻāʻo e hoʻoponopono i ka hoʻopili ʻana ma o hoʻokahi a ʻoi aku paha o kēia mau ana:

• Hoʻonohonoho hou a hoʻoneʻe paha i ka antenna e loaʻa ana.
• E hoʻonui i ka kaʻawale ma waena o nā mea hana a me ka mea hoʻokipa.
• E hoʻohui i nā mea hana i kahi puka ma kahi kaapuni ʻokoʻa mai ka mea i hoʻopili ʻia ai ka mea hoʻokipa.
• Consult the dealer or an experienced radio/TV technician for help. ISED Canada compliance statement

ʻO ka ʻōlelo hoʻokō ʻo ISED Canada
Mālama kēia hāmeʻa me ka ISED Kanada laikini laulā RSS s. Kūpono ka hana i kēia mau ʻano ʻelua: (1) ʻaʻole hiki i kēia hāmeʻa ke hoʻopilikia, a (2) pono i kēia hāmeʻa e ʻae i kekahi mea i hoʻopilikia ʻia, e komo pū ana me ka hoʻowalewale e hana i ka hana i makemake ʻole ʻia o ka hāmeʻa.

ʻŌlelo Hōʻike RF:
Hōʻike Hōʻike Radiation: Hoʻopili kēia mea hana me ka IC RSS-102 nā palena hoʻolaha radiation i hoʻonohonoho ʻia no kahi kaiapuni ʻole. Pono e hoʻokomo a hoʻohana ʻia kēia mea hana me ka liʻiliʻi o 20 cm ma waena o ka radiator a me kou kino.

Pākuʻi A

6318 BLE Dial Magnetic Sensor
DS-02041

The 6318 BLE Dial Magnetic sensor provides a wireless reading of a Rochester Mechanical Sensor installed in a tank. The unit replaces the normal dial and optional R3D electronics module with a new BLE Dial that broadcasts tank volume over Bluetooth. An integrated LCD display shows tank volume in % full.

The unit is battery operated and fully sealed. It replaces an existing dial, either screw-on or snap-on and contains no serviceable parts inside.

The Sensor is suitable for field applications including high pressure washing systems.

General Information & Features

• Temp Range Static: -40⁰C to +80⁰C / -40⁰F to +176⁰F
• Ingress Protection: IP67 / IP69K Rated
• System Accuracy: +/- 2%
• Hōʻike LCD
• Bluetooth data broadcast every 2.2 seconds
• Operational Life Span: Up to 10 Years
• Operational Range: Over 50FT
• See SD-587 for entity parameters.

Na Ke Kumu Hoʻouka Sensor

These instructions are made to assist tradesmen and others generally familiar with liquid storage tank equipment. Most consumers are not qualified to perform the installation described herein. If you have any question concerning installation or operation of this product, contact Rochester Sensors LLC or one of our authorized distributors for assistance.

1. Remove the existing dial and any connected electronics module. Dispose of according to location standards for metal and electronic disposal.
2. Remove the BLE Dial from the shipping container.
3. Before installing the new BLE dial, clean the head of any foreign debris or liquids.
4. For snap-on dials, position the BLE Dial’s alignment key over the slot on the gauge head. Gently press into place until all four latching tabs snap onto the existing gauge head.
5. For screw-on dials, align the round and rectangular ends of the new BLE Dial housing with the existing sensor. Install the screws, tighten to 2 in-lb with hand tools only.
6. Verify the LCD is reading the appropriate level.
7. The installer may optionally verify the BLE dial is broadcasting over Bluetooth. Refer to the Manufacturer’s instructions on parsing BLE broadcast packets.
8. Mea lako is intended for fixed and grounded installation only.

OLELO HOOLAHA

Tank may contain high pressure and flammable gas.
These units are not meant to be repaired or serviced. Doing so will void the intrinsically safe rating of the device.
The product is a sealed unit and is never meant to be opened or modified in any way. Doing so will invalidate all certifications and safety listings.

Nā Kūlana Palekana

OLELO HOOLAHA – POTENTIAL ELECTROSTATIC CHARGING HAZARD Caution must be used when handling or cleaning products so there is no static charge buildup. Do not wipe off the 6318 BLE Dial with dry cloth. Use only water damp cloth and allow to air dry for cleaning device. Do not use or install in high charge areas. See IEC60079-32-1 for further information.

Ordinary Locations Safety Standards
Conforms to UL STD 61010-1 Ed. 3	Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements * Nānā: For USA ordinary locations listing certification
Certified to CSA STD C22.2 #61010-1-12 Ed.3	Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements * Nānā: For Canada ordinary locations listing certification
Hazardous Locations Safety Standards
IEC 60079-0: 2017	Explosive atmospheres – Part 0 Equipment – General requirements * Nānā: For IECEx Certification
IEC 60079-11: 2011 + C1: 2012	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" * Nānā: For IECEx Certification
IEC 60079-25: 2010 Ed 2.	Explosive atmospheres – Part 25: Intrinsically safe electrical systems * Nānā: For IECEx Certification
EN 60079-0: 2018	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau * Nānā: For ATEX Certification
EN 60079-11:2012	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" * Nānā: For ATEX Certification
IEC 60079-25: 2010 Ed 2.	Explosive atmospheres – Part 25: Intrinsically safe electrical systems * Nānā: For ATEX Certification
Conforms to UL 60079- 0, 7th Ed.	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau * Nānā: For USA listing certification
Conforms to UL 60079- 11, 6th Ed.	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" * Nānā: For USA listing certification
Certified to CSA C22.2 No. 60079-0: Ed. 4	Nā lewa pahū - Māhele 0: Nā lako - Nā koi maʻamau * Nānā: For Canada listing certification
Certified to CSA C22.2 No. 60079-11: Ed. 2	ʻO nā lewa pahū - Māhele 11: Ka pale ʻana i nā mea hana e ka palekana kūlohelohe "i" * Nānā: For Canada listing certification

Rochester Sensors, LLC BLE Magnetic Sensor does not require any external connections or sources of power. The Sensor device is certified as complete intrinsic safety system (Reference Intrinsic Safety Control Drawings SD-587). Device is intended for use in Class 1, Division 1, Groups C and D, T4 or Zone 0, Group IIB, T4 Hazardous Locations under the certification schemes and ratings noted below:

IECEx (Global Certification): Ex ia IIB T4 Ga     -40°C ≤ TAMB ≤ +80°C     IECEx Cert # IECEx ETL 23.0060X

ATEX (EU Certification): ϲϵ2575             II 1G Ex ia IIB T4 Ga   -40°C ≤ TAMB ≤ +80°C   ATEX Cert # ETL23ATEX0359X

North America (USA & Canada): Class 1 Zone 0 AEx ia IIB T4 Ga Class 1, Division 1, Groups C & D, T4 Ex ia IIB T4 Ga -40°C ≤ TAMB ≤ +80°C   CSA Cert # ETL23CA105206098X

United Kingdom (UK):   UKCA0359            II 1G Ex ia IIB T4 Ga   -40°C ≤ TAMB ≤ +80°C   UKEX Cert # ITS23UKEX0794X

Intrinsic Safety System Level Verification

Hoʻohālike	BLE Magnetic Sensor Entity Nā ʻāpana
Hui Lako	Groups C&D (Group IIB)
Ka pae o ka palekana	Ex ia
Mahana Hoʻokaʻawale	T4
Nā Mahana Kūlohelohe	-40°C a i +80°C
Hoʻohālikelike Kūlana
Voltage	Ui: N/A
ʻO kēia manawa	Ii: N/A
Ka mana	Pi: N/A
Ka mana	Ci: N/A
Inductance	Li: N/A
L/R ratio	N/A
Ka honua	N/A

CE Compliance section:

• Electromagnetic Compatibility
  1. EN 61000-6-2:2005 – Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial environments IEC 61000-6-2:2005
  2. EN 61000-6-4:2007 – Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments IEC 61000-6-4:2006
• Restriction of hazardous substances in electrical and electron equipment

EN 50581:2012 – Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances.

Special Conditions of use:

1. Equipment is intended for fixed and grounded installation only

Nīnau pinepine

• Q: What should I do if I encounter a status code on the LCD display?
  A: Refer to Appendix A in the user manual for all system errors and warnings associated with the status codes displayed on the LCD.
• Q: How do I know if the wireless dial is compatible with my existing gauge?
  A: The 6318 Jr Wireless Dial is compatible with Rochester Sensors standard 1.5 gauges including medium-duty spiral gauge. Ensure compatibility before installation.

Palapala / Punawai

Rochester Sensors 6318 Jr Wireless Dial Remote Read BLE Output Sensors [pdf] Palapala a ka mea nona 6318, 2BCFF-6318, 2BCFF6318, 6318 Jr Wireless Dial Remote Read BLE Output Sensors, 6318 Jr Wireless Dial, Remote Read BLE Output Sensors, Read BLE Output Sensors, BLE Output Sensors, Output Sensors, Sensors

Nā kuhikuhi

• Palapala Hoʻohana