Dahua Dome Network Camera

Package Contents

• Dome Network Camera ×1
• Mounting Accessories ×1
• Optional Accessories ×1

Installation Steps

Step 1: Prepare the Camera and Mount

Refer to the diagrams for detailed steps on preparing the camera and mounting hardware. Ensure all components are present.

1.1 Mounting Plate Installation:

• Attach the mounting plate using the provided screws.
• Torque specification: 0.8 N·m.

1.2 Camera Body Attachment:

• Connect the camera body to the mounting plate.

Step 2: Cable Connections (A, B, C)

Follow the diagrams for correct cable connections:

2.A: Network and Power Connection

• Connect the network cable (Ethernet).
• Connect the power cable.

2.B: Waterproof Cable Connection

• Ensure waterproof connections for outdoor installations.
• Connect the cables as shown in the diagrams.

2.C: Cable Management

• Secure and manage cables to protect them from the elements.
• Use the provided cable ties and connectors.

Step 3: Camera Configuration and Adjustment

3.1 Initial Setup:

• Connect the camera to a network and power source.
• Access the camera's interface via a computer.
• Follow on-screen prompts for initial configuration.

3.2 Focus and Zoom Adjustment:

• Use the PH1 screwdriver to adjust the lens focus.
• Torque specification: 0.5 N·m.
• Adjust zoom as needed.

3.3 Angle Adjustment:

• Adjust the camera's viewing angle.
• Tighten the adjustment screws securely.
• Torque specification: 0.8 N·m.

Step 4: Final Installation

4.1 Securing the Camera:

• Ensure the camera is firmly attached to the mounting surface.
• Use the T15 tool for final tightening.
• Torque specification: 0.8 N·m.

4.2 Disposal of Packaging:

• Dispose of all packaging materials responsibly.