ARDUINO ABX00027 Nano 33 IoT Mea Hoʻohana Manual
wehewehe
ʻO Nano 33 IoT kahi ʻāpana liʻiliʻi liʻiliʻi i loaʻa kahi kaʻina Cortex M0+ SAMD21, kahi module WiFi + BT e pili ana i ka ESP32, kahi chip crypto hiki ke mālama paʻa i nā palapala hōʻoia a me nā kī pre-share a me kahi axis IMU. Hiki ke kau ʻia ka module ma ke ʻano he ʻāpana DIP (ke kau ʻana i nā poʻo pine), a i ʻole ma ke ʻano he SMT, e kūʻai pololei ʻia ma o nā pads castellated.
Nā wahi i kuhi ʻia:
Mea hana, hoʻonui, nā hiʻohiʻona noiʻi IoT kumu
Nā hiʻohiʻona
SAMD21G18A
- Mea hana
- 256KB Flash
- 32KB Flash
- Mana Hoʻohou (POR) a me Brown Out Detection (BOD)
- Pilipili
- 12 kanal DMA
- ʻōnaehana hanana hanana 12
- 5x 16 bit Timer/Counter
- 3x 24 bit timer/counter me nā hana lōʻihi 32 bit RTC
- Manawa ilio kiai
- CRC-32 mīkini hana hoʻoheheʻe
- ʻO ka Host/Pūnaewele USB wikiwiki piha me nā helu hope 8
- 6x SERCOM (USART, I2C, SPI, LIN)
- ʻElua kanal I2S
- 12 bit 350ksps ADC (a hiki i ka 16 bit me ka oversampling) 10 bit 350ksps DAC
- Mea Hoʻoponopono Kūwaho (a hiki i 16 laina)
Nina W102
- Module
- Dual Core Tensilica LX6 CPU a hiki i ka 240MHz
- 448 KB ROM, 520KB SRAM, 2MB Flash
- WiFi
- IEEE 802.11b a hiki i 11Mbit IEEE 802.11g a hiki i 54MBit IEEE 802.
- 11n a hiki i 72MBit 2.4 GHz, 13 mau ala 16dBm mana puka
- 19 dBm EIRP
- -96 dBm ʻike
- Bluetooth BR/EDR
- Max 7 peripherals
- 2.4 GHz, 79 awāwa
- A hiki i 3 Mbit/s
- 8 dBm mana puka ma 2/3 Mbit/s 11 dBm EIRP ma 2/3 Mbit/s
- -88 dBm ʻike
- Bluetooth Haʻahaʻa Energy
- Bluetooth 4.2 ʻelua ʻano 2.4GHz 40 kaha
- 6 dBm mana puka
- 9 dBm EIRP
- -88 dBm ʻike
- A hiki i 1 Mbit/
- MPM3610 (DC-DC)
- Hoʻoponopono i ka hoʻokomo voltage mai ka 21V me ka liʻiliʻi loa o 65% efficiency @ ka liʻiliʻi loa ʻoi aku ma mua o 85%
- fficience @12V
- ATECC608A (Crypto Chip)
- Cryptographic co-processor me ka paʻa paʻa paʻa paʻa kī waiho mālama mālama ʻia a hiki i 16 mau kī, palapala hōʻoia a ʻikepili paha.
- ECDH: FIPS SP800-56A Elliptic Curve Diffie-Hellman
- NIST maʻamau P256 elliptic curve kākoʻo
- SHA-256 & HMAC hash me ka hoʻopaʻa/hoʻihoʻi ʻana i ka pōʻaiapili o waho
- AES-128 encrypt/decrypt, hoʻonui ʻia ka māla galois no GCM
- LSM6DSL (6 axis IMU)
- Ma nā manawa a pau 3D accelerometer a me 3D
- gyroscope Smart FIFO a hiki i 4 KByte
- ± 2/±4/±8/±16 g paona piha
- ± 125/±250/±500/±1000/±2000 dps paona piha
Ka Papa
E like me nā papa kumu kumu Nano a pau, ʻaʻohe o Nano 33 IoT i ka pahu pākaukau akā hiki ke hoʻohana ʻia ma o USB a i ʻole nā poʻo.
HOOLAHA:
Kākoʻo ʻo Arduino Nano 33 IoT i 3.3VI/Os a ʻaʻole ʻae ʻo 5V no laila e ʻoluʻolu e ʻoluʻolu ʻaʻole ʻoe e hoʻopili pololei i nā hōʻailona 5V i kēia papa a i ʻole e pōʻino. Eia kekahi, e kū'ē i nā papa Arduino Nano e kākoʻo ana i ka hana 5V, ʻaʻole hāʻawi ka 5V pin i ka vol.tagakā ua pili ʻia, ma o ka lele, i ka mana hoʻokomo USB.
Noi Examples
Weather Station: Ke hoʻohana nei i ka Arduino Nano 33 IoT me kahi mea ʻike a me kahi hōʻike OLED, hiki iā mākou ke hana i kahi keʻena liʻiliʻi liʻiliʻi e kamaʻilio pololei ana i ka mahana, ka haʻahaʻa a me nā mea ʻē aʻe i kāu kelepona.
Nānā maikaʻi o ka ea: He hopena koʻikoʻi paha ka maikaʻi o ka ea i kou olakino. Ma ka hōʻuluʻulu ʻana i ka Nano 33 IoT, me kahi sensor a me ka nānā ʻana hiki iā ʻoe ke hōʻoia i ka mālama ʻana i ka maikaʻi o ka ea i loko o nā wahi o loko. Ma ka hoʻopili ʻana i ka hui ʻenehana i kahi noi IoT/API, e loaʻa iā ʻoe nā waiwai manawa maoli.
ʻO ka pahu hau: ʻO kahi papahana wikiwiki a leʻaleʻa ka hana ʻana i kahi pahu lewa liʻiliʻi. Hoʻohui i kāu Nano 33 IoT a hoʻouka i kāu kiʻi mai ka Create Web Lunahooponopono a hoʻomaka i ka hana ʻana i nā beats me kāu pāhana leo āu e koho ai.
Heluhelu
Manaʻo ʻia nā kūlana hana
| hōʻailona | wehewehe | Min | Max |
| Nā palena wela conservative no ka papa holoʻokoʻa: | -40 °C (40 °F) | 85°C (185 °F) |
Ka mana Hoʻohana
| hōʻailona | wehewehe | Min | ʻAno | Max | Unite |
| VINMax | Kaha hoʻokomo kiʻekiʻetage mai VIN pad | -0.3 | – | 21 | V |
| VUSBMax | Kaha hoʻokomo kiʻekiʻetage mai ka mea hoʻopili USB | -0.3 | – | 21 | V |
| PMax | Hoʻohana mana kiʻekiʻe | – | – | TBC | mW |
Hana ma lunaview
Papa Topology
| Ref. | wehewehe | Ref. | wehewehe |
| U1 | ATSAMD21G18A mea hooponopono | U3 | LSM6DSOXTR IMU Sensor |
| U2 | NINA-W102-00B WiFi/BLE Module | U4 | ATECC608A-MAHDA-T Crypto Chip |
| J1 | Hoʻohui Micro USB | PB1 | IT-1185-160G-GTR Puhi pihi |
| Ref. | wehewehe | Ref. | wehewehe |
| SJ1 | Ua wehe ʻia ke alahaka kūʻai (VUSB) | SJ4 | Ua pani ʻia ke alahaka kūʻai (+3V3) |
| TP | Nā helu hoʻāʻo | xx | Lorem Ipsum |
Mea hana
ʻO ka Kaʻina Hana Nui he Cortex M0+ e holo ana a hiki i 48MHz. Hoʻopili ʻia ka hapa nui o kāna mau pine i nā poʻomanaʻo o waho, akā mālama ʻia kekahi no ke kamaʻilio kūloko me ka module uila a me nā peripheral I2C kūloko ma luna o ka papa (IMU a me Crypto).
HOOLAHA:
E kū'ē i nā papa Arduino Nano ʻē aʻe, loaʻa nā pine A4 a me A5 i kahi huki i loko a paʻamau e hoʻohana ʻia ma ke ʻano he I2C Bus no laila ʻaʻole ʻōlelo ʻia ka hoʻohana ʻana e like me nā hoʻokomo analog.
Hiki ke kamaʻilio me NINA W102 ma o ke awa serial a me kahi pahi SPI ma o nā pine aʻe.
| SAMD21 Pin | SAMD21 Acronym | NINA Pin | NINA Acronym | wehewehe |
| 13 | PA08 | 19 | RESET_N | Hoʻoponopono hou |
| 39 | PA27 | 27 | GPIO0 | Noi Manao |
| 41 | PA28 | 7 | GPIO33 | E hoʻomaikaʻi |
| 23 | PA14 | 28 | GPIO5 | SPI CS |
| 21 | GPIO19 | UART RTS | ||
| 24 | PA15 | 29 | GPIO18 | SPI CLK |
| 20 | GPIO22 | UART CTS | ||
| 22 | PA13 | 1 | GPIO21 | SPI MISO |
| 21 | PA12 | 36 | GPIO12 | SPI MOSI |
| 31 | PA22 | 23 | GPIO3 | Mea hana TX Nina RX |
| 32 | PA23 | 22 | GPIO1 | Kaʻina hana RX Nina TX |
WiFi/BT Kākoʻo Module
Hoʻokumu ʻia ʻo Nina W102 ma ESP32 a hāʻawi ʻia me kahi pūʻulu polokalamu i hōʻoia mua ʻia mai Arduino. Loaʻa ka code kumu no ka firmware [9].
HOOLAHA:
ʻO ka hoʻonohonoho hou ʻana i ka polokalamu kelepona ʻole me ka mea maʻamau e hōʻole i ka hoʻokō ʻana i nā kūlana lekiō e like me ka hōʻoia ʻana e Arduino, no laila ʻaʻole ʻoluʻolu ʻia ke ʻole ke hoʻohana ʻia ka noi ma nā hale hana pilikino mamao loa mai nā lako uila a me nā kānaka. ʻO ka hoʻohana ʻana i nā ʻoihana maʻamau ma nā modula lekiō ke kuleana o ka mea hoʻohana.
Hoʻopili ʻia kekahi o nā pine o ka module i nā poʻo o waho a hiki ke alakaʻi pololei ʻia e ESP32 i hāʻawi ʻia nā pine pili o SAMD21 i ʻōlelo ʻia ʻekolu. Aia ma lalo ka papa inoa o ia mau hōʻailona:
| SAMD21 Pin | SAMD21 Acronym | NINA Pin | NINA Acronym | wehewehe |
| 48 | PB03 | 8 | GPIO21 | A7 |
| 14 | PA09 | 5 | GPIO32 | A6 |
| 8 | PB09 | 31 | GPIO14 | A5/SCL |
| 7 | PB08 | 35 | GPIO13 | A4/SDA |
Crypto
ʻO ka puʻupuʻu crypto ma nā papa Arduino IoT ka mea e hoʻokaʻawale ai me nā papa ʻē aʻe i paʻa ʻole i ka mālama ʻana i kahi ala palekana e mālama ai i nā mea huna (e like me nā palapala hōʻoia) a me ka wikiwiki i nā protocol palekana ʻoiai ʻaʻole e hōʻike i nā mea huna ma ka kikokikona maʻalahi.
Loaʻa ka code kumu no ka Arduino Library e kākoʻo ana i ka Crypto [10]
IMU
ʻO Arduino Nano 33 IoT he 6 axis IMU i hoʻokomo ʻia e hiki ke hoʻohana ʻia no ke ana ʻana i ka papa kuhikuhi (ma ka nānā ʻana i ka gravity acceleration vector orientation) a i ʻole e ana i nā haʻalulu, vibration, acceleration and rotation speed.
Loaʻa ka code kumu no ka Arduino Library e kākoʻo ana i ka IMU [11]
Laau Mana
Laau mana
Hana Papa
Hoʻomaka - IDE
Inā makemake ʻoe e hoʻolālā i kāu Arduino 33 IoT i ka wā ma waho, pono ʻoe e hoʻokomo i ka Arduino Desktop IDE [1] No ka hoʻopili ʻana i ka Arduino 33 IoT i kāu kamepiula, pono ʻoe i kahi kaula USB Micro-B. Hāʻawi kēia i ka mana i ka papa, e like me ka mea i hōʻike ʻia e ka LED.
Hoʻomaka - Arduino Web Lunahooponopono
ʻO nā papa Arduino āpau, me kēia, hana ma waho o ka pahu ma ka Arduino Web Lunahooponopono [2], ma ka hookomo wale ana i ka plugin maalahi.
ʻO Arduino Web Hoʻokipa ʻia ka Lunahooponopono ma ka pūnaewele, no laila e hoʻomau mau ʻia me nā hiʻohiʻona hou loa a me ke kākoʻo no nā papa āpau. E hahai i [3] e hoʻomaka i ka hoʻopaʻa inoa ma ka polokalamu kele pūnaewele a hoʻouka i kāu mau kiʻi kiʻi ma kāu papa.
E hoʻomaka - Arduino IoT Cloud
Kākoʻo ʻia nā huahana Arduino IoT āpau ma Arduino IoT Cloud e hiki ai iā ʻoe ke hoʻopaʻa inoa, ka pakuhi a me ka nānā ʻana i ka ʻikepili sensor, hoʻoulu i nā hanana, a hoʻomaʻamaʻa i kou home a ʻoihana paha.
Sample Nā kiʻi kiʻi
SampHiki ke loaʻa nā kiʻi kiʻi no ka Arduino 33 IoT ma ka "Examples" ma ka Arduino IDE a i ʻole ma ka
ʻO ka ʻāpana "Paʻi palapala" o ka Arduino Pro webkahua [4]
Nā kumuwaiwai pūnaewele
I kēia manawa ua hele ʻoe i nā kumu o ka mea hiki iā ʻoe ke hana me ka papa hiki iā ʻoe ke ʻimi i nā mea hiki ʻole ke hāʻawi ʻia ma ka nānā ʻana i nā papahana hoihoi ma ProjectHub [5], ka Arduino Library Reference [6] a me ka hale kūʻai pūnaewele [7] kahi āu hiki iā ia ke hoʻokō i kāu papa me nā mea ʻike, nā mea hana a me nā mea hou aku
Hoola Papa
Loaʻa i nā papa Arduino āpau kahi bootloader i kūkulu ʻia e hiki ai ke hoʻolohi i ka papa ma o USB. Inā hoʻopaʻa ʻia kahi kiʻi kiʻi i ke kaʻina hana a ʻaʻole hiki ke kiʻi hou ʻia ka papa ma o USB hiki ke komo i ke ʻano bootloader ma ke kaomi pālua ʻana i ke pihi hoʻihoʻi ma hope pono o ka mana.
Nā Pinout Hoʻohui
USB
| Pin | Hana | ʻAno | wehewehe |
| 1 | VUSB | Ka mana | Hookomo Mana Mana. Inā hoʻohana ʻia ka papa ma o VUSB mai ke poʻo he Output kēia
(1) |
| 2 | D- | ʻokoʻa | ʻIkepili ʻokoʻa USB - |
| 3 | D+ | ʻokoʻa | ʻIkepili ʻokoʻa USB + |
| 4 | ID | Analog | Koho i ka Host / Device hana |
| 5 | GND | Ka mana | Ka Papa Pā |
Hiki i ka papa ke kākoʻo i ka mode host USB inā wale nō e hoʻohana ʻia ma ka pine VUSB a inā pōkole ka lele kokoke i ka pine VUSB.
Nā poʻomanaʻo
Hōʻike ka papa i ʻelua mau mea hoʻohui pin 15 i hiki ke hui pū ʻia me nā poʻo pine a i ʻole ke kūʻai ʻia ma o nā vias castellated.
| Pin | Hana | ʻAno | wehewehe |
| 1 | D13 | Kikohoʻe | GPIO |
| 2 | +3V3 | Lanakila | Hoʻopuka ʻia ka mana i loko i nā mea waho |
| 3 | AREF | Analog | Analog Reference; hiki ke hoʻohana ʻia e like me GPIO |
| 4 | A0/DAC0 | Analog | ADC i loko/DAC i waho; hiki ke hoʻohana ʻia e like me GPIO |
| 5 | A1 | Analog | ADC ma; hiki ke hoʻohana ʻia e like me GPIO |
| 6 | A2 | Analog | ADC ma; hiki ke hoʻohana ʻia e like me GPIO |
| 7 | A3 | Analog | ADC ma; hiki ke hoʻohana ʻia e like me GPIO |
| 8 | A4/SDA | Analog | ADC ma; I2C SDA; Hiki ke hoʻohana ʻia e like me GPIO (1) |
| 9 | A5/SCL | Analog | ADC ma; I2C SCL; Hiki ke hoʻohana ʻia e like me GPIO (1) |
| 10 | A6 | Analog | ADC ma; hiki ke hoʻohana ʻia e like me GPIO |
| 11 | A7 | Analog | ADC ma; hiki ke hoʻohana ʻia e like me GPIO |
| 12 | VUSB | Ka mana komo/waho | ʻO ka maʻamau NC; hiki ke hoʻopili ʻia i ka pine VUSB o ka mea hoʻohui USB ma ka pōkole ʻana i kahi jumper |
| 13 | RST | Digital In | Hoʻokomo hoʻihoʻi haʻahaʻa haʻahaʻa (ke kope o ka pine 18) |
| 14 | GND | Ka mana | Ka Papa Pā |
| 15 | VIN | Mana In | Hoʻokomo mana Vin |
| 16 | TX | Kikohoʻe | USART TX; hiki ke hoʻohana ʻia e like me GPIO |
| 17 | RX | Kikohoʻe | USART RX; hiki ke hoʻohana ʻia e like me GPIO |
| 18 | RST | Kikohoʻe | Hoʻokomo hoʻihoʻi haʻahaʻa haʻahaʻa (ke kope o ka pine 13) |
| 19 | GND | Ka mana | Ka Papa Pā |
| 20 | D2 | Kikohoʻe | GPIO |
| 21 | D3/PWM | Kikohoʻe | GPIO; hiki ke hoʻohana ʻia e like me PWM |
| 22 | D4 | Kikohoʻe | GPIO |
| 23 | D5/PWM | Kikohoʻe | GPIO; hiki ke hoʻohana ʻia e like me PWM |
| 24 | D6/PWM | Kikohoʻe | GPIO, hiki ke hoʻohana ʻia e like me PWM |
| 25 | D7 | Kikohoʻe | GPIO |
| 26 | D8 | Kikohoʻe | GPIO |
| Pin | Hana | ʻAno | wehewehe |
| 27 | D9/PWM | Kikohoʻe | GPIO; hiki ke hoʻohana ʻia e like me PWM |
| 28 | D10/PWM | Kikohoʻe | GPIO; hiki ke hoʻohana ʻia e like me PWM |
| 29 | D11/MOSI | Kikohoʻe | SPI MOSI; hiki ke hoʻohana ʻia e like me GPIO |
| 30 | D12/MISO | Kikohoʻe | SPI MISO; hiki ke hoʻohana ʻia e like me GPIO |
Debug
Ma ka ʻaoʻao lalo o ka papa, ma lalo o ka module kamaʻilio, hoʻonohonoho ʻia nā hōʻailona debug e like me 3 × 2 mau papa hoʻāʻo me 100 mil pitch. Hōʻike ʻia ka Pin 1 ma ke Kiʻi 3 - Nā kūlana hoʻohui
| Pin | Hana | ʻAno | wehewehe |
| 1 | +3V3 | Lanakila | E hoʻohana ʻia ka mana i hana ʻia e like me voltage kuhikuhi |
| 2 | SWD | Kikohoʻe | SAMD11 Hoʻokahi Uea Debug ʻIkepili |
| 3 | SWCLK | Digital In | SAMD11 Hoʻokahi Uea Debug Uaki |
| 4 | UPDI | Kikohoʻe | ATMega4809 mea hoʻonui hou |
| 5 | GND | Ka mana | Ka Papa Pā |
| 6 | RST | Digital In | Hoʻokomo haʻahaʻa hana hou |
ʻIke Mechanical
Papa Hoike a me na Puwa Kauwa
Hoʻohui ʻia nā ana papa ma waena o ka metric a me ka imperial. Hoʻohana ʻia nā ana Imperial no ka mālama ʻana i 100 mil pitch grid ma waena o nā lālani pine e hiki ai iā lākou ke hoʻokomo i kahi papa palaoa a ʻo ka lōʻihi o ka papa he Metric.
Nā Kūlana Hoʻohui
ʻO ka view Aia ma lalo mai luna akā e hōʻike ana i nā pad connector Debug aia ma ka ʻaoʻao lalo. ʻO nā pine i kaha ʻia he pine 1 no kēlā me kēia mea hoʻohui.
luna view:
Malalo view:
Nā palapala hōʻoia
Hōʻike o ka Kulike CE DoC (EU)
Ke haʻi aku nei mākou ma lalo o kā mākou kuleana hoʻokahi e pili ana nā huahana i luna me nā koi koʻikoʻi o ka EU Directives a no laila ua kūpono i ka neʻe manuahi i loko o nā mākeke e pili ana i ka European Union (EU) a me ka European Economic Area (EEA).
Hōʻike i ka hoʻokō ʻana i ka EU RoHS & REACH 211 01/19/2021
Hoʻopili nā papa Arduino i ka RoHS 2 Directive 2011/65/EU o ka European Parliament a me RoHS 3 Directive 2015/863/EU o ka Council of 4 June 2015 ma ka palena o ka hoʻohana ʻana i kekahi mau mea pōʻino i nā lako uila a me nā lako uila.
| mea waiwai | palena palena kiʻekiʻe (ppm) |
| Kēpau (Pb) | 1000 |
| Kāmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Hoʻokuʻu ʻia: ʻAʻole koi ʻia nā hoʻokuʻu.
Ua hoʻokō piha nā Papa Arduino i nā koi pili o ka European Union Regulation (EC) 1907/2006 e pili ana i ke kākau inoa, loiloi, ʻae a me ka hoʻopaʻa ʻana i nā mea kemika (REACH). ʻAʻole mākou e haʻi aku i kekahi o nā SVHC (https://echa.europa.eu/web/guest/candidate-list-table), ka papa inoa o nā moho o nā mea e hopohopo nui loa no ka ʻae i hoʻokuʻu ʻia e ECHA i kēia manawa, aia i nā huahana āpau (a me ka pūʻolo pū kekahi) i ka nui o ka helu ʻana i ka helu like a i ʻole ma luna o 0.1%. I ka maikaʻi o ko mākou ʻike, ke haʻi aku nei mākou ʻaʻole i loaʻa i kā mākou huahana kekahi o nā mea i helu ʻia ma ka "Papa Manaʻo" (Annex XIV o nā lula REACH) a me Substances of Very High Concern (SVHC) i nā helu nui e like me ka mea i kuhikuhi ʻia. e ka Annex XVII o ka papa inoa moho i paʻi ʻia e ECHA (European Chemical Agency) 1907 /2006/EC.
Hōʻike Kūkākūkā Minerala
Ma ke ʻano he mea hoʻolako honua o nā ʻāpana uila a me ka uila, ʻike ʻo Arduino i kā mākou kuleana e pili ana i nā kānāwai a me nā hoʻoponopono e pili ana i nā Conflict Minerals, ʻo ia hoʻi ka Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. nā mineral e like me Tin, Tantalum, Tungsten, a i ʻole gula. Aia nā mineral conflict i loko o kā mākou huahana ma ke ʻano o ka solder, a i ʻole ma ke ʻano he ʻāpana i nā mea hao. Ma ke ʻano he ʻāpana o kā mākou mākau kūpono kūpono ua hoʻopili ʻo Arduino i nā mea hoʻolako ʻāpana i loko o kā mākou kaulahao lako e hōʻoia i ko lākou hoʻomau ʻana i nā lula. Ma muli o ka ʻike i loaʻa a hiki i kēia manawa ke haʻi aku nei mākou aia kā mākou huahana i nā Conflict Minerals i loaʻa mai nā wahi hakakā ʻole.
FCC akahele
ʻO nā hoʻololi a i ʻole nā hoʻololi i ʻae ʻole ʻia e ka ʻaoʻao kuleana no ka hoʻokō hiki ke hoʻopau i ka mana o ka mea hoʻohana e hana i nā lako. Hoʻopili kēia mea hana i ka ʻāpana 15 o nā Rula FCC. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino
- pono e ʻae kēia hāmeʻa i nā hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hoʻokō i ka hana makemake ʻole.
ʻO FCC RF Radiation Exposure Statement:
- ʻAʻole pono e hoʻopili ʻia kēia Transmitter a i ʻole e hana pū me kekahi antenna a i ʻole transmitter.
- Hoʻopili kēia mea hana i nā palena hōʻike radiation RF i hoʻonohonoho ʻia no kahi kaiapuni ʻole.
- Pono e hoʻokomo a hana ʻia kēia mea hana me ka liʻiliʻi loa he 20cm ma waena o ka radiator a me kou kino.
Loaʻa i nā puke mea hoʻohana no nā mea lekiō i hoʻokuʻu ʻia i ka laikini ka hoʻolaha ma hope a i ʻole ka like ma kahi ʻike ʻia ma ka manual mea hoʻohana a i ʻole ma ka hāmeʻa a i ʻole nā mea ʻelua. Hoʻopili kēia hāmeʻa i ka maʻamau RSS i hoʻokuʻu ʻia i ka laikini ʻo Industry Canada. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia
- pono e ʻae kēia hāmeʻa i kekahi keakea, me ke keakea ʻana e hiki ai ke hoʻohana ʻole ʻia ka mea hana.
IC SAR Waring:
Pono e hoʻokomo a hana ʻia kēia mea hana me ka liʻiliʻi loa he 20 cm ma waena o ka radiator a me kou kino.
Mea nui:
ʻAʻole hiki ke ʻoi aku ka mahana hana o ka EUT ma mua o 85 ℃ a ʻaʻole pono e emi ma lalo o -40 ℃. Ma kēia, haʻi aku ʻo Arduino Srl e pili ana kēia huahana i nā koi koʻikoʻi a me nā ʻōlelo kūpono ʻē aʻe o Directive 2014/53/EU. Ua ʻae ʻia kēia huahana e hoʻohana i nā mokuʻāina lālā o EU.
| Nā pūʻulu alapine | Ka mana puka kiʻekiʻe loa (ERP) |
| 863-870Mhz | -3.22dBm |
ʻIkepili Hui
| inoa hui | Arduino SA. |
| Wahi Hui | Via Ferruccio Pelli 14 6900 Lugano Switzerland |
Palapala Kuhikuhi
| Kuhikuhi | loulou |
| Arduino IDE (Pakukau) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Kapua) | https://create.arduino.cc/editor |
| Ka Hoʻomaka ʻana o Cloud IDE | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino- web-editor-4b3e4a |
| Forum | http://forum.arduino.cc/ |
| SAMD21G18 | http://ww1.microchip.com/downloads/en/devicedoc/40001884a.pdf |
| NINA W102 | https://www.u-blox.com/sites/default/files/NINA-W10_DataSheet_%28UBX- 17065507%29.pdf |
| ECC608 | http://ww1.microchip.com/downloads/en/DeviceDoc/40001977A.pdf |
| MPM3610 | https://www.monolithicpower.com/pub/media/document/MPM3610_r1.01.pdf |
| NINA Firmware | https://github.com/arduino/nina-fw |
| Hale Waihona Puke ECC608 | https://github.com/arduino-libraries/ArduinoECCX08 |
| LSM6DSL Hale Waihona Puke | https://github.com/stm32duino/LSM6DSL |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Ka Waihona Puke | https://www.arduino.cc/reference/en/ |
| Halekuai Arduino | https://store.arduino.cc/ |
Moolelo Hooponopono
| Lā | Hoʻoponopono | Nā hoʻololi |
| 04/15/2021 | 1 | Nā hōʻano hou ʻikepili maʻamau |
Palapala / Punawai
 |
ARDUINO ABX00027 Nano 33 IoT [pdf] Palapala Hoʻohana ABX00027, Nano 33 IoT |
