A-ITX49-A1B Euler TX Plus Enclosure
User ManualUser Manual
Product Code: A-ITX49-A1B / A-ITX49-A1B
A-ITX26-A1BV2 / A-ITX26-M1BV2

A-ITX49-A1B Euler TX Plus Enclosure

CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-controlled workstation is not available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled with care. Keep away from children.

Contents

1. HDD protective film
2. 2.5” HDD / SSD mounting bracket
3. 2.5” HDD / SSD screws
4. HDD mounting bracket screws
5. power cable
6. SATA cable
7. thermal compound
8. screws for motherboard
9. washer
10. VESA mounting screws
11. case feet kit

Front Panel Layout

Internal Layout

A CPU cooler
B Front panel PCB
C M/B Mounting standoffs
D Mounting holes for 2.5″ HDD/SSD bracket

Internal Cable Connectors

Connect the case internal cable connectors to the corresponding motherboard headers.
NOTE : If the connectors are not apparent on the board consult your motherboard manual.
Connecting the panel to the wrong headers may result in motherboard damage.

Installation

VESA Mounting Instructions

Case Feet Installation

Documents / Resources

akasa A-ITX49-A1B Euler TX Plus Enclosure [pdf] User Manual A-ITX49-A1B Euler TX Plus Enclosure, Euler TX Plus Enclosure, A-ITX49-A1B Plus Enclosure, Plus Enclosure, Enclosure, A-ITX49-A1B, A-ITX26-A1BV2, A-ITX49-A1B

References

• User Manual