akasa A-ITX51-A1B Slim Fanless Case User Manual
User Manual
Product Code:
A-ITX51-A1B / A-ITX51-M1B & A-ITX52-A1B / A-ITX52-M1B
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-controlled workstation is not available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled with care. Keep away fromchildren
Internal Cable Connectors
Connect the case internal cable connectors to the corresponding motherboard headers.
NOTE : If the connectors are not apparent on the board consult your motherboard manual. Connecting the panel to the wrong headers may result in motherboard damage.
Front Panel Layout
for A-ITX51
for A-ITX52
Rear Panel
INSTALLATION WARNING
Ensure the installation follows the illustrated instructions for screw removal and tightening to prevent mis-alignment of the panels. unfasten screws: tighten screws:
Do not remove the screws indicated in the illustration
Installation VESA Mounting Instructions
Read More About This Manual & Download PDF:
Documents / Resources
 |
akasa A-ITX51-A1B Slim Fanless Case [pdf] User Manual A-ITX51-A1B Slim Fanless Case, Slim Fanless Case, A-ITX51-A1B Fanless Case, Fanless Case, Case, A-ITX51-A1B, A-ITX51-M1B |
