Harmony HTT-5 True Wireless Stereo User Manual

HTT-5 True Wireless Stereo

Product Specifications

  • Model: HTT-5
  • Product Type: True Wireless Stereo Earbuds
  • Charging Port: Type-C
  • Features: Touch Control, Ambient Noise Cancellation Mic

Product Usage Instructions

Power On/Off

Power on:

  1. Auto: Open the charging case and take out the earbuds to power
    on.
  2. Manually: Press and hold the MFB (Touch Panel) for 3
    seconds.

Power off:

  1. Auto: Place both earbuds in the charging case and close the
    lid.
  2. Manually: Press and hold the MFB for 5 seconds.

Pairing

  1. Open the charging case and take out the earbuds; they will pair
    automatically.
  2. Activate Bluetooth on your device, search for pairing name
    “HTT-5” and click on it.

Reset

  1. Delete all “HTT-5” Bluetooth records on your phone and turn off
    Bluetooth.
  2. Put earbuds into the charging case, then take them out to
    pairing mode; tap L & R MFB 5 times simultaneously to clear all
    pairings.

Touch Operation

Left Earbud:

  • Play/Pause: Tap the MFB once
  • Answer the call: Tap the MFB once
  • Previous Track: Double tap the left MFB
  • End Call/Reject Call: Double tap the MFB
  • Volume Control: Triple tap the left MFB
  • Voice Assistant: Press and hold the MFB for 1.5 seconds

Right Earbud:

  • Play/Pause: Tap the MFB once
  • Answer the call: Tap the MFB once
  • Next Track: Double tap the right MFB

Frequently Asked Questions (FAQ)

Q: How do I know if my earbuds are low on battery?

A: When the battery power is low, there will be a voice reminder
every minute and a red light will flash twice until the battery
runs out.

Q: What should I do if only one earbud works or they fail to
pair?

A: Follow these steps to reset the earphones:

  1. Delete all “HTT-5” Bluetooth records on your phone and turn off
    Bluetooth.
  2. Put earbuds into the charging case, then take them out to
    pairing mode; tap L & R MFB 5 times simultaneously to clear all
    pairings.

“`

NN
HTT-5
USER MANUAL
True Wireless St ereo

Charging Case × 1PC

Earbuds × 1 Pair

Type- C Charging Cable × 1PC

HTT-5
USER MANUAL
True Wireless St ereo
User Manual × 1 PC 1

Product Overview

Charging Pin

Touch Control Diagram
The touch area (MFB Touch Panel) is located in the upper part of earbuds handle.
(MFB) Touch Panel

Power ON/ OFF
Power on
Auto: Open the charging case and take out the earbuds to power on
Manually: Press and hold the MFB for 3s.

LED Indicator
Touch Area (MFB) Mic

Type-C Port
Ambient Noise Cancellation Mic

Wearing Earbuds
Note: The left earbud marked with L is worn in the left ear, and the right earbud marked with R is worn in the right ear.

Open cover and take out the earbuds to power on

Touch to turn on

Power off

Auto: Place both Earbud in your charging case, Close the lid.

Manually: Press and hold the MFB for 5s.

Charging Pin 2

3

Put earbuds in to power off

Touch to turn off

4

Pairing

1. Open the charging case, and take out the earbuds,earbud will pair automatically, One of the earbuds flashes blue and red, the another earbud light goes out. 2. Activate Bluetooth on the device, turn on Bluetooth, search for pairing name ” HTT-5 ” and click on it.

16:48

SIM

Settings

Bluetooth

Bluetooth

Now discoverable as”MEYGOO iPhone”. MY DEVICES

HTT-5

Bluetooth Lost
1. Turn off mobile phone’s Bluetooth, earbuds will enter the pairing mode and can pair with other devices. 2. If the connection range is exceeded, the earbuds will enter the back connection mode. No connection within 5 minutes, the earbuds will turn off
Notes For Signal Transmission

Tips: Next use, Open the charging case, earbuds auto connect phone.
Single Mode
When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.

16:48 Settings Bluetooth

SIM Bluetooth

Now discoverable as”MEYGOO iPhone”. MY DEVICES

HTT-5

Distance (as illustrate)

16:48 Settings Bluetooth

SIM Bluetooth

Now discoverable as”MEYGOO iPhone” . MY DEVICES

HTT-5

10m signal works normal 10m signal will be interrupted

5

6

Reset
If your earbuds accidentally only get one earbud to work, or fail to pair, please reset the earphone. 1. Delete all ” HTT-5 ” Bluetooth records on the phone, and turn off Bluetooth 2. Put earbuds into charging case, and then take out to pairing modes, tap L & R
MFB 5 times simultaneously, hear “DU” prompt voice to clear all pairing. 3. Put earbuds into charging case.

16:48 Settings Bluetooth

SIM Bluetooth

Now discoverable as”MEYGOO iPhone”. MY DEVICES

HTT-5

Remove HTT-5 records

Tap L&R 5 times simultaneously

Put earbuds into charging case

9

Touch Operation

Lef t Earbud

1 x Play / Pause Tap the MFB once

1 x Answer the call Tap the MFB once

2 x Previous Track Double tap the left MFB

2 x End Call /Reject call Double tap the MFB

3 x Volume Triple tap the left MFB

4 x Game mode Four tap the MFB

1.5s Voice assistant

Press and hold the MFB for 1.5s

10

Touch Operation Right Earbud

Earbuds low battery alarm
When the battery power is low, every 1 minute voice reminder “Lower battery” and Red light double flashing, until the battery power is run out and turn off.

Lower battery

Lower battery

1 x Play / Pause Tap the MFB once

1 x Answer the call Tap the MFB once

2 x Next Track Double tap the right MFB

2 x End Call /Reject call Double tap the MFB

3 x Volume + Triple tap the right MFB

4 x Game mode Four tap the MFB

1.5s Voice assistant

Press and hold the MFB for 1.5s

11

Charge your earbuds
Place your earbuds the charging case and close the lid, earbuds automatically complete charge.
12

Product Parameter

Earbud(each)
Model Name: Bluetooth Version: Speaker: Bluetooth Range: Technology: Frequency Range: Weight : Size: Charging Time: Battery Capacity: Play Music Time: Input :

HTT-5 V5.4 10mm 10m/ 33f t(with out obstacles) HSP/ HFP/ A2DP/ AVRCP 20Hz~20KHz 4.5g 38*24*19mm 0.5H 40mAh 6H DC 5V 0.08A

Charging Case
Weight : Size: Charging Time: Battery Capacity: Input :

33g 65*53*29mm 2H 500mAh DC 5V 0.3A

Earbuds Warning

1. Please do not place the product in an environment where the temperature is too low(above 45¥or below 0¥).
2. Do not dismantle or repair the earbuds under any circumstances, if necessary, please send the product to the seller for repair.
3. Do not throw and drop the earbuds to avoid damage. 4. The earbuds and the BT devices will be disconnented if the distance between
them is more than 10 meters. 5. Keep the device and accessories away from children and pets. 6. Do not put the earbuds into the washing machine.
Battery Warning
1. The battery in the product may cause fire disaster or risk of chemical burning if mishandled.
2. Please charge with a rated voltage charger. 3. The discard of battery should obey local law, if possible please recycle it. Do not
dispose it as household garbage, because it may cause a explosion. 4. Users are not allowed to take out or replace battery in the product unless there
is a stipulation on user manual. It is very hazardous to do this, may cause a damage to prodct.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2BONF-HTT-5

13

14

15

Documents / Resources

Harmony HTT-5 True Wireless Stereo [pdf] User Manual
2BONF-HTT-5, 2BONFHTT5, HTT-5 True Wireless Stereo, HTT-5, True Wireless Stereo, Wireless Stereo, Stereo

References

Leave a comment

Your email address will not be published. Required fields are marked *