Harmony HTT-11 True Wireless Stereo Earbuds User Manual

HTT-11 True Wireless Stereo Earbuds

Product Information

Specifications

  • Model: HTT-11
  • Power: 1.5s
  • Channels: 7
  • Frequency: 1.5s

Product Usage Instructions

Installation

  1. Place the device in an open area with good reception.
  2. Connect the device to a power source using the provided
    cable.
  3. Turn on the device using the power button.

Operation

  1. Use the control panel to select the desired channel.
  2. Adjust the frequency as needed for clear reception.
  3. Follow the user manual for advanced settings and features.

Maintenance

Regularly clean the device with a soft, dry cloth to prevent
dust build-up. Avoid using harsh chemicals or solvents.

FAQ

Q: What should I do if I experience interference?

A: If you experience interference, try the following steps:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and
    receiver.
  • Connect the equipment into an outlet on a different circuit
    from the receiver.
  • Consult the dealer or a radio/TV technician for
    assistance.

Q: Is it safe to make modifications to the device?

A: No, changes or modifications not approved by the responsible
party may void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. It must not
cause harmful interference and must accept any received
interference.

FCC ID: 2BONF-HTT-11

“`

HTT-11 HHTTTT-11

HTT-11
HTT-11
HTT-11

1.5s

1.5s

7

1.5s

8

1.5s

9

3 HTT-11
HTT-11

HTT-11

HTT-11

10

11

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2BONF-HTT-11

12

13

Documents / Resources

Harmony HTT-11 True Wireless Stereo Earbuds [pdf] User Manual
2BONF-HTT-11, 2BONFHTT11, HTT-11 True Wireless Stereo Earbuds, HTT-11, True Wireless Stereo Earbuds, Wireless Stereo Earbuds, Stereo Earbuds, Earbuds

References

Leave a comment

Your email address will not be published. Required fields are marked *