HARLEY-DAVIDSON-logo

HARLEY-DAVIDSON HDL-17110 Retro Radio

HARLEY-DAVIDSON-HDL-17110-Retro-Radio-product

Button Function

  1. Tuning
  2. Function Band Selector
  3. Volume Control
  4. LED indicator
  5. Antenna
  6. AC SocketHARLEY-DAVIDSON-HDL-17110-Retro-Radio-fig-1

Operation

  • POWER CORD OPERATION
    Connect the AC power cord to AC power input. Connect power cord to on outlet
  • BATTERY OPERATION
    Remove AC power cord and remove the battery compartment cover. Install two UM-1, R20 or D Cell batteries into the battery compartment, strictly follow the polarity markings illustrated in the compartment.
  • ON/OFF
    Switch on the power switch before operation and turn off when not in use.
  • RADIO OPERATION
    • Set the bond switch to the position of your desired frequency. (AM/FM)
    • Turn the knob to tune into your desired radio station and adjust the volume control to the desired level.
    • Note: When listening to an AM broadcast, rotate or change the location of the radio to obtain the best reception.
    • When listening to an FM broadcast, it’s important to adjust the length of the antenna for a stronger signal.
  • BLUETOOTH FUNCTION
    Turn the function switch to the Bluetooth position to play music. Bluetooth Device Name: RIDEFREE

SPECIFICATIONS

  • Frequency Range:
    • EU – AM, 530-1600 KHz FM, 88-108 MHz
    • USA – AM, 520-1710 KHz FM, 88-108 MHz
  • Power:
    • EU – AC, 220V / S0Hz DC, 3V / LR20 1.2W
    • USA – AC, 110V -60Hz DC, 3V = ( 1.5V’2 LR20 )
  • Speaker: 40 HM/3W

WARRANTY

Free replacement of any port that fails within 90 days from date of purchase, excluding shipping costs. Void
if damaged by misuse, accidents, alterations, failure to follow instructions, fire, flood, and acts of God.
If you have any questions or comments, contact us at: BrandedProducts.com

©2025 H-D or its Affiliates. Ace Product Management Group, Inc., Milwaukee, WI, U.S.A.

FCC

FCC Warning Statement:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Frequently Asked Questions (FAQ):

  • Q: What should I do if I experience interference with radio or television reception?
    A: Follow the provided measures in the user manual to correct any interference issues. If problems persist, consult a professional for further assistance.
  • Q: Is there any restriction on the usage of the device in terms of RF exposure?
    A: The device can be used in portable exposure conditions without any restrictions as it complies with general RF exposure requirements.

Documents / Resources

HARLEY-DAVIDSON HDL-17110 Retro Radio [pdf] User Manual
2BP3F-HDL-17110, 2BP3FHDL17110, HDL-17110 Retro Radio, HDL-17110, Retro Radio, Radio

References

Leave a comment

Your email address will not be published. Required fields are marked *