Haozee Tuya Zigbee Plug User Guide

POWER PLUG
USER GUIDE
ZIGBEE

Specifications

Input Voltage: AC 85-250V 50/60Hz
Maximum Current: 16A
Overload Protection: 16A
Standby Power Consumption: 0.5W
Wireless Distance: 50M
Communication Protocol: Zigbee 3.0
Network Protocol: IEEE 802.15.4 MAC/PHY
Operating Temperature: 0°C~50°C (32~122°F)
Operating Moisture: 0%~85%RH (Non-con-densing)
Product Size: 59mm X 59mm X 56mm

LED State

Product Configuration

Installation

1. Plug the smart socket into a power outlet.
2. Add the smart socket to the app.
3. Turn on the switch. (The socket can connect to small appliances such as lights, fans, etc.)

Get Started

1. Download APP
Android: Download the “Smart Life” app from Google Play.
IOS: Download the “Smart Life” app from the App Store.

http://smartapp.tuya.com/smartlife
2. Register and Login
Run APP, register and log in the account (new users need to register, and existing accounts can enter email and password to log in)

3. Add Device
(1) Add Tuya ZigBee Gateway
Add Tuya ZigBee controller first and operate with the controller user manual. (Please notice the wired and wireless version controller)(2) Add Sub-devices
Before adding a device, ensure it is in pairing mode. To enter pairing mode, press and hold the reset button for 6 seconds until the device indicator light flashes.

Main functions

Working status and record settings
1. APP main interface

2. Device Functions
(1) Timer function

1. Countdown on/off
   
2. Timed On/Off
3. Looping timing
4. Random timing
5. Jog switch

(2) Electricity metering

3. Set up

1. Switch Log
2. Clear battery data
3. Power-on state
4. Indicator light mode
5. Child lock
   Can be deactivated locally by powering on the device or by pressing the button 4 times consecutively)

Other functions

1. Shared devices
   
2. Product linkage
   E.g., linkage with human infrared sensor; when the PIR detects movement, the socket switch is turned on.
3. Restore Default
   After clicking “Uninstall and Clear Data, adding the device again will clear the data and restore the default settings.

FAQ

1. Why does the socket automatically turn off the power after an appliance is plugged in?
A: This is because the plugged-in appliance exceeds the rated current (16A) of the socket, triggering the overload protection function.
The socket will automatically cut off the power to prevent damage.
2. What happens when a socket experiences undervoltage or overvoltage?
A: When undervoltage (voltage below 85V) or overvoltage (voltage above 260V) is detected, the socket will immediately and automatically cut off the power.

Smart Home Device contains WiFi smart device, Z-Wave device and ZigBee device, give you more choices to create a new smart life.
Wide application on the living room, kitchen, bedroom, bathroom, garage, garden, yard or basement of your home, office, ware house, chain store…
Make life smarter and more convenient.