Micronics CaluX Tri Mode Mechanical Keyboard

CaluX
Tri-mode Mechanical Keyboard Specification
Product name: Three-mode single white light mechanical keyboard
Model: CaluX

Attached product picture (For reference only)

Product features

1-1. Double color keycaps, stylish and easy to clean
1-2. Professional mechanical backlit bluetooth three-mode office keyboard, which can be freely switched and used in different devices, completely solving the trouble of multiple computers and multiple sets of equipment; welding shafts or plug-in shafts can be selected at will
1-3. RGB light backlight , the product supports 20 different backlight modes and is easy to switch, which strengthens the deep application of each mode, and freely adjusts the brightness and frequency
1-4. Full keys conflict free

Mechanical Electrical Characteristics

Basic specificat ions	IC solution	YC31 21 -R , tri-mode mechanical keyboard
	Working voltage	Li-battery 3.7V, 4200mA/H
	Working current	isomp MAX
	Battery life	361-1
	Interface	USB+2.4G +Bluetooth Tri-mode
	USB+TYPE-C cable	Charging cable OD:3.8*1800mm, nickel-plated black braided wire
	Key number	108
	Multimedia key	No
	Dimension	430 * 123.5* 25.5±1mm			W eig ht	1350±30g
	Color	Black
	Working way	Matrix scan
	Language & process	Double color keycaps, laser engraving
	LOGO	Customized	LOGO process	Laser engraving/UV/silkprint

Parametric properties	Key force	1.5KG
	Starting force	50±10g
	Keycap spacing	19.00mm.+0.05nun
	Operating load	60±5gf
Parametric properties	Operating stroke	4.0±0.5mm
	Conduction stroke	2.2±0.6mm
	Trigger trip	I .8±0.5mm
	Maximum force stroke ( I20g)	3.8±0.2mm
	Lifetime	In DC 5V 0.ImA Test more than 50 million times at a rate of 4 times per second under the working conditions
	Touch	Knock anywhere on the button at a rate of 4 times per second. and feel no bad hand feeling
Environm ental parameters	Operating temperature	0 to + 55 °C
	Working humidity	40%-80%
	Storage temperature	-20°C to + 60°C
	Storage humidity	593% (40°C)

Main parts and materials

Upper cover	Black	ABS
Lower cover	Black	ABS
Middle board	Cream	PC
Keycaps	Black	Double color
Tripod (double layer)	Black	ABS
Switch	Cyan

Connection

4.1

4-2、2.4G receiver connection
4-3、Bluetooth 3.0, 5.0 connectivity

Character abrasion test

Testing frequency: 1000 times
Testing speed: 72 times / min
Eraser type (1107#)
Journey: 12 mm
Ambient temperature: 25℃
Humidity: 65%

Function description

6-1. Indicator light: 6-2. Lighting Arrangement (primary key area white light)
6-3. FN key combination function
Definition of electrical function of monochromatic light scheme
Press the FN+ combination to switch, 20 kinds of backlight cycle sequence：always bright mode–To guide the country-breathing mode–One press Light goes out– Follow the wave and go with the flow-Flowing light-Flowing coloredlight-DrippingRipples-StipplingEye-catching-Abouttohappen-steppingonthesnow-ButtonRipple -flowers bloom rich-RunningHorse-Rotating storm-VariableRunningHorse–starry spot-Constant stream-Oblique transformation-Light wave(Default always bright)      6-4. Description of the switch at the bottom of the keyboard 6-4-1、When the system switch is turned to MAC, it is the Apple system, and when it is turned to WIN, it is the Microsoft system.
6-4-2. When the mode switch is turned to USB, turn off the lithium battery, and insert the cable for charging and USB mode. When dialing to BT, it is Bluetooth mode, and when dialing to 2.4G, it is 2.4G mode.
6-5. Instructions for charging and low voltage indication
When charging, Red Light often bright, full red light off, when the voltage is less than 3.3 v, red light flashing
6-6. Mode instructions
6-6-1. Wired mode: no indicator light, when the switch is turned to USB, it is wired mode
6-6-2. 2.4G mode: The white indicator of the 1 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-6-3. Bluetooth mode 1: the white indicator of the 2 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-6-4. Bluetooth mode 2: The white indicator of the 3 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-6-5. Bluetooth mode 3: The white indicator of the 4 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-7. 2.4G pairing
2.4G pairing
After the keyboard is powered on, press the FN+1 combination key for 3S to enter the pairing mode, the Q key white indicator flashes quickly, insert the receiver, exit the pairing code after successful pairing, the Q key white indicator returns to normal backlight mode, and the paired device cannot be found After 20s, exit the pairing mode and the white indicator of the Q key will enter the waiting pairing mode. When there is no code matching, it will enter sleep mode after 7 seconds.
6-8. Bluetooth pairing
Press and hold the FN+2/3/4 key combination for 3S, the keyboard enters the code matching state, the white light of the corresponding device key flashes quickly, and the Bluetooth device starts to be connected. After connecting the device, the indicator light returns to normal backlight mode. If not connectedd, the backlight will be off after 7 seconds and the keyboard goes to sleep.
6-9. Reconnection instructions
6-9.1 The indicator light flashes slowly during the 2.4G reconnection process. After connecting, the indicator light will return to normal backlight. Press the button during the reconnection process to extend the reconnection time. Within 2 minutes from releasing the button, the reconnection fails and the backlight turns off, the keyboard will go to sleep, if the pairing is successful, it will enter the pairing mode again. After the pairing fails, the keyboard will go to sleep but will keep the last successful pairing data.
6-9-2. The indicator light flashes slowly during the Bluetooth reconnection process. After connecting, the indicator light is normally backlit. Pressing the button during the reconnection process can extend the reconnection time. Within 2 minutes after releasing the button, the reconnection fails, the backlight goes out, and the keyboard turned off. Go to sleep, if the pairing is successful and enter the pairing mode again, after the pairing fails, the keyboard will go to sleep but the last successful pairing data will be retained

System Compatibility

7-1. Interface: Compliant with USB standard V1.1；Support USB1.0/1.1 ; Compatible with USB 2.0/3.0
7-2. Operating system: WINDOWS XP/7/8/10/MAC V10.X
7-3. This solution can be certified (FCC, CE, ROHS and other safety certification)

FCC Instructions

FCC Compliance Statement(Part 15.19 (3))
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Information
This device complies with Part 15 of the FCC Results. Operation is subject to the following two conditions:

1. This Device may not cause harmful interface, and
2. This Device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures ;
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.

WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
CAUTION : Exposure to Radio Frequency Radiation.( Cases not subject to SAR measurement) To comply with FCC’s RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
FIG. 1：

FIG. 2: Receiver
Rated voltage: 5V
Interface: USB
Receiving distance: 8m
Weight: 2g
Dimension: 18.6×13.5×6±0.01mm

WORLD CLASS TECHNOLOGY
WORLD CLASS QUALITY, WORLD CLASS COST.

Documents / Resources

Hanmi Micronics CaluX Tri Mode Mechanical Keyboard [pdf] User Manual CaluX Tri Mode Mechanical Keyboard, CaluX, Tri Mode Mechanical Keyboard, Mode Mechanical Keyboard, Mechanical Keyboard, Keyboard

References

• User Manual