HALMAR MEDEA Coffee Table
Assembly Steps
Step 1
Attach parts K, D, and E to the base A using the connectors provided. Ensure all parts are securely fastened.
Step 2
Connect part F to the assembly from Step 1. Use parts H and J to secure the connection.
Step 3
Attach part G to the structure. Use parts I and J to ensure stability.
Step 4
Complete the assembly by securing all parts. The final dimensions should be 90 cm in length and 50 cm in height.
COMPONENT
Specifications
| Part | Description | Quantity |
|---|---|---|
| A | Base | 1 |
| B | Support | 2 |
| C | Rod, ø8×420 mm | 4 |
| D | Connector, ø38×260 mm | 1 |
| E | Connector, ø38×185 mm | 3 |
| F | Connector, ø38×205 mm | 1 |
| G | Connector, ø38×130 mm | 3 |
| H | Connector, ø38×68 mm | 2 |
| I | Connector, ø38 mm | 4 |
| J | Connector, M8 | 16 |
Contact Information
HALMAR Sp. z o.o.
ul. Centralnego Okręgu Przemysłowego 2, 37-450 Stalowa Wola, POLSKA / POLAND
Tel: +48 15 843 28 10
Fax: +48 15 842 19 57
Email: office@halmar.com.pl
FAQ
What tools are needed for assembly?
Basic tools such as a screwdriver and wrench are recommended for assembly.
How long does assembly take?
Assembly typically takes about 30-45 minutes.
Are all parts included in the package?
Yes, all parts listed in the specifications are included.
What should I do if a part is missing?
Contact HALMAR customer service using the contact information provided.
Documents / Resources
 | MEDEA Coffee Table |
References
- User Manualmanual.tools
Published: September 29, 2025
Updated: September 30, 2025