Halliday RP100 Ring User Manual

Halliday-logo

Halliday RP100 Ring

Halliday-RP100-Ring-product

Specifications

  • Model: Halliday RP100
  • Size: 55*55mm (Ring), 330*55mm (Halliday Glasses)
  • Bluetooth: Bluetooth Low Energy (Bluetooth LE) 5.1 transceiver

Intended Use

The Halliday Ring is designed to provide a discreet and hands-free experience controlling the Halliday Glasses. It must be used together with the Halliday Glasses for the intended purpose. Please refer to the user manual for Halliday Glasses for more information.

Disclaimer

Depending on the software release of your phone and the glasses or specific carrier services, there may be certain differences between the descriptions within the user manual and the phone’s actual operation.
HALLIDAY HOLDINGS PTE. LTD. and GYGES LABS PTE. LTD. shall not be legally responsible for such differences.

Safety Information

To reduce the risk of personal injury, discomfort, or property damage, please read the following safety information carefully before using the Halliday Ring.

General Safety Precautions 

  • This Halliday Ring is designed for use with the Halliday Glasses only. Avoid using it with other devices to prevent malfunction.
  • Keep the ring dry, and avoid exposing it to excessive moisture or high temperatures.
  • Keep the ring away from strong magnetic fields to prevent potential interference with functionality.
  • Only use the provided charging cable and adapter to charge the ring.
  • Ensure the charging port is dry and clean before connecting the charger.
  • Do not charge the ring in high-temperature environments or while it is exposed to water.

Health and Comfort 

  • Avoid wearing the ring too tightly to prevent discomfort or restriction of blood flow.
  • Do not wear the ring while engaging in vigorous physical activities that could cause injury or damage to the ring.
  • If the ring causes skin irritation, remove it immediately and consult a healthcare professional.

Handling and Care 

  • For optimal performance, avoid overcharging the ring. Disconnect it once fully charged.
  • Charge the ring in accordance with the recommended cycle to prolong battery life.
  • Clean the ring using a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Periodically check for damage, such as cracks or loose parts, and discontinue use if any issues are found.

Environmental and Disposal Guidelines 

  • Dispose of the ring responsibly in accordance with local electronic waste disposal regulations.
  • Do not dispose of the Halliday Ring in regular household waste.

Warranty Policy

The warranty for Halliday products is valid for one year from the date of receiving your product(s) and two years for countries in the EU or EFTA. Please be aware that the warranty duration complies with the consumer laws applicable in the country where the product is purchased.
For more information, please visit hallidayglobal.com or contact support@hallidayglobal.com.

Bluetooth Specifications

A Bluetooth Low Energy (Bluetooth LE) 5.1 transceiver integrates the Controller and Host layers

  • Supported data rates: 1 Mbps, 2 Mbps, and Long Range (500 kbps, 125 kbps)
  • Frequency Range: 2402 – 2480MHz
  • Max transmitting output power: 0.35 dBm
  • 96 dBm sensitivity (in 1 Mbps mode)
  • 93 dBm sensitivity (in 2 Mbps mode)
  • 99 dBm sensitivity (in Long Range 500 kbps mode)
  • 102 dBm sensitivity (in Long Range 125 kbps mode)
  • TX current: 5.6 mA @ 0 dBm, 1 Mbps
  • RX current: 4.8 mA @ 1 Mbps

General Information

Website Address: https://hallidayglobal.com
Place of Business: 8 KAKI BUKIT AVENUE 4, #08-32, PREMIER @ KAKI BUKIT, SINGAPORE 415875
On our website, you will find our support center, FAQ (Frequently Asked Questions), tech specs, etc. Manufacturer: Shenzhen Arcension Co., Ltd.
Adult supervision is strongly suggested for use by children under the age of 14.

Regulatory information

Hereby, HALLIDAY HOLDINGS PTE. LTD. declares that the product type Halliday Glasses is in compliance with RED Directive 2014/53/EU.
For the warning information of the frequency restriction, please refer to the package or manual section.

FCC Statement

FCC ID:2BN47-HALLIDAYRP108
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

 IC Statement

IC: 33662-RINGS

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

FAQ

  • Q: What is the warranty duration for Halliday products?
    A: The warranty is valid for one year from the date of receiving the product(s) and two years for countries in the EU or EFTA.
  • Q: Is adult supervision required for children using the product?
    A: Yes, adult supervision is strongly suggested for children under the age of 14.

Documents / Resources

PDF thumbnailRP100 Ring
User Manual · RP100, RP100 Ring, Ring

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.