Haier-LOGO

Haier HTW7720 Series Built in Refrigerator

Haier-HTW7720-Series-Built-in-Refrigerator-PRODUCT

Specifications

  • Model: HTW7720ENMP
  • Language Options: GB, DE, FR, IT, ES, NL, HU, PL, CZ, PT, EL, HR, ET, LT, LV
  • Features: My Zone Schublade, Humidity Schublade, Hintere Lampe, Flaschenablage, Einlegeboden aus Glas, Wassertank (HFW7720EWMP), Wasserspender (HFW7720EWMP)

Product Usage Instructions

  • Safety Information:
    • Before using the refrigerator for the first time, ensure it is properly unpacked and placed by at least two people. Make sure the machine is grounded and always handle the power cord carefully. Avoid using mechanical devices for defrosting and follow manufacturer’s recommendations for maintenance and cleaning.
  • Installation:
    • Ensure the refrigerator is placed on a stable and level surface. Do not store materials that may corrode or interfere with temperature accuracy. Check that the power outlet matches the refrigerator plug and do not modify the electrical components.
  • Operation:
    • Allow up to 12 hours for the refrigerator to reach the desired temperature after initial setup. Use the sensor buttons for adjusting settings and consider activating the standby mode when not in use to save energy.
  • Maintenance:
    • Clean the refrigerator regularly with a soft cloth and mild detergent. Avoid using water directly on the appliance and never use sharp objects for defrosting.

FAQs

  • Q: How long does it take for the refrigerator to reach the desired temperature?
    • A: It may take up to 12 hours for the refrigerator to reach the set temperature after initial setup.
  • Q: Can I use mechanical devices for defrosting?
    • A: No, it is recommended to only use methods approved by the manufacturer for defrosting to avoid damaging the appliance.

“`

Safety information

Before switching on the appliance for the first time read the following safety hints!:

WARNING!
Before first use
 Make sure there is no transport damage.
 Remove all packaging and keep out of children’s reach.
 Wait at least two hours before installing the appliance in order to ensure the refrigerant circuit is fully efficient.
 Handle the appliance always with at least two persons because it is heavy.

Installation
 The appliance should be placed in a well-ventilated place. Ensure a space of at least 10 cm above and 10 cm around the appliance.
 Never place the appliance in a damp area or location where it might be splashed with water. Clean and dry water splashes and stains with a soft clean cloth.
 Do not install the appliance in direct sunlight or in the near of heat sources(e.g. stoves, heaters).
 Install and level the appliance in an area suitable for its size and use.
 Keep ventilation openings in the appliance or in the in-built structure clear of obstruction.
 Make sure that the electrical information on the rating plate agrees with the power supply. If it does not, contact an electrician,
 The appliance is operated by a 220-240 VAC/50 Hz power supply. Abnormal voltage fluctuation may cause the appliance to fail to start, or damage to the temperature control or compressor, or there may be an abnormal noise when operating. In such case, an automatic regulator shall be mounted.
 Use a separate earthed socket for the power supply which is easy accessible. The appliance must be earthed.
 Only for UK: The appliance’s power cable is fitted with 3-cord (grounding) plug that fits a standard 3-cord (grounded) socket. Never cut off or dismount the third pin (grounding). After the appliance is installed, the plug should be accessible.
 Do not use multi-plug adapters and extension cables.
 Ensure that the power cable is not trapped by the refrigerator. Do not step on the power cable.
 Do not damage the refrigerant circuit.

WARNING!

Daily use
 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved,
 Keep away children under 3 years of age from the appliance unless they are constantly supervised.
 Children shall not play with the appliance.
 If cool gas or other inflammable gas is leaking in the vicinity of the appliance, turn off the valve of the leaking gas, open the doors and windows and do not unplug a plug in the power cable of the refrigerator or any other appliance.
 Notice that the appliance is set for operation at a specific ambient range between 10 and 43°C. The appliance may not work properly if it is left for a long period at a temperature above or below the indicated range.
 Do not place unstable articles (heavy objects, containers filled with water) on top of the refrigerator, to ovoid personal injury caused by falling or electric shock caused by contact with water.
 Do not pull on the door shelves. The door may be pulled slant, th bottle rack, may be pulled away, or the appliance may topple
 Open and close the doors only with the handles. The gap between the doors and between the doors and the cabinet is very narrow. Do not extend your hands in these areas to avoid pinching your fingers.
Open or close the refrigerator doors only when there are no children standing within the range of door movement.
 Do not store or use inflammable, explosive or corrosive materials in the appliance or in the vicinity.
 Do not store medicines, bacteria or chemical agents in the appliance.
This appliance is a household appliance. It is not recommended to store materials that require strict temperatures.
 Never store liquids in bottles or cans (besides high percentage spirits) especially carbonated beverages in the freezer, as these will burst during freezing.
 Check the condition of food if a warming in the freezer has taken place.

Inten ded u se

2.1 Intended use
This ap pliance is in tend ed for cooling and freezin g food. It has been designed exclu sively for use in dry-int erio r house-holds. It is not in tend ed for commercial or ind ustrial use.
Changes or modif icat ions to the device are not allowed . Unint end ed use may cause hazard s and loss of warr ant y claim s.

2.2 Accessories
Check the accessories and literature in accordance wit h this list (Fig .:2.2):

Haier-HTW7720-Series-Built-in-Refrigerator-FIG- (1)

* HTW7720ENMP /HTW7720ENMB/HTW7720ENPT

Product description

Notice: Differences
Due to technical changes and different models, some of the illustrations in this manual may differ from your model.
Picture of appliance (Fig. 3)

model: HFW7720EWMP /HFW7720ENMB

Haier-HTW7720-Series-Built-in-Refrigerator-FIG- (2)

1 Door rack
2 O.K.-temperature indicator (optional)
3 Humidity Zone drawer
4 My Zone drawer
5 Upper freezer storage drawer
6 Lower freezer storage drawer
7 Adjustable feet
8 Door beam
9 My Zone drawer glass cover
10 Humidity drawer glass cover
11 Back lamp
12 Bottle rack
13 Glass shelf
14 Rating plate
15 Water tank (HFW7720EWMP)
16 Water dispenser (HFW7720EWMP)

model: HTW7720ENMP /HTW7720ENMB/HTW7720ENPT/HTW7720DNMP

Haier-HTW7720-Series-Built-in-Refrigerator-FIG- (3)1 Door rack
2 OK-temperature ind icator (option al )
3 Upp er freezer storage drawe r
4 Lower freezer storage drawe r
5 Adju stable fee t
6 My Zone drawer
7 My Zone drawer gl ass cov er
8 Humid ity Zone drawe r
9 Humid ity drawer gl ass cov er
10 Bottl e rack
11 Glass shel f
12 Rating plate
13 Back l amp

Control panel

Control panel (Fig. 4)

Haier-HTW7720-Series-Built-in-Refrigerator-FIG- (4)

Keys:
A Fridge temperature setting
B Freezer temperature setting
C My Zone setting
D Auto Set mode and Wifi function on/off
E Super Cool function and Holiday function on/off
F Super Freeze function on/off
G Panel lock/unlock
Indicators:
a Temperature fridge compartment
b Temperature freezer compartment
c My Zone function
d1 Wifi function
d2 Holiday function
d3 Auto Set mode
e Super-Cool function
f Super-Freeze function
g Panel lock

Use

5.1 Before first use
 Remove all packaging materials, keep them out of children’s reach and dispose them in an environmentally friendly manner.
 Clean the inside and outside of the appliance with water and a mild detergent before putting any food in it.
 After the appliance has been levelled and cleaned, wait for at least 2 hours before connecting it to the power supply. See Section INSTALLATION.
 Precool the compartments at high settings before loading with food. The function Super-Freeze helps to cool down the freezer com partment quickly.
 The refrigerator temperature and freezer temperature are automatically set to 5° C and -18° C respectively. These are the recommended settings. If desired, you can change these temperatures manually. Please see MANUAL ADJUSTING MODE.

5.2 Sensor keys
The buttons on the control panel are sensor keys, which already respond when lightly touched with the finger.

5.3 Switch on /off the appliance
The appliance is in operation as soon as it is connected to the power supply. When the appliance is powered on for the first time, the actual refrigerator and freezer temperatures (“a” and “b”) are displayed. The display will flash. If the doors are closed it will switch off after 30 seconds. Maybe the panel lock is active.

Notice: Presettings
The appliance is preset to the recommended temperature of 5°C (refrigerator) and 18°C (freezer). Under normal ambient condition you need not to set a temperature.
The presetting function for the My Zone drawer is Fruit&Veg.
When the appliance is switched on after disconnection from the main power supply, It may take up to 12 hours for the correct temperatures to be reached.

Empty the appliance before switching off. To switch off the appliance, pull the power cord out off the power socket.

5.4 Standby-mode
The display screen turns off automatically 30 seconds after pressing a key. The display will be automatically locked. It lights up automatically by touching any key or opening the door/drawer.

Lock/unlock panel
Notice: Panel lock
The control panel is automatically blocked against activation if 30 seconds no key is touched. For any settings the control panel must be unlocked
 Touch key “G” for 3 seconds to block all panel elements against activation (Fig. 5.5). The related indicator “d” is now displayed.
 For unlocking touch again the key.

Haier-HTW7720-Series-Built-in-Refrigerator-FIG- (5)5.6 Door opening alarm
When one of the refrigerator doors is opened for more than 1 minute, the door opening alarm will sound. The alarm can be silenced by closing the door. If the door is left open for more than 7 minutes, the light inside the refrigerator and control panel illumination will automatically switch off.
5.7 Select the working mode
You may need to select one of the following two ways to set the appliance:

5.7.1 Auto Set mode
If you do not have any special requirements, we recommend that you use Auto Set mode In the mode, the appliance can automatically adjust the temperature setting according to the ambient temperature and temperature change in the appliance. This function is totally hand free.

1. Unlock the panel by touching key “G” if it is locked (Fig. 5.5)
2. Touch key “D” (Fig 5.7.1.1)
3. Indicator ”d3″ illuminates and the function is activated (Fig. 5.7.1-2)
By repeating the above steps or selecting an other function this function can be switched off again.

5.7.2 Manual adjusting mode
If you want to manually adjust the temperature of the appliance in order to store a particular food, you can set the temperature via a temperature adjusting key:

Notice: Conflict with other functions
The temperature cannot be adjusted, if any other function (Super- Cool, Super- Freeze, Holiday or Auto Set) is activated or the display is locked. The corresponding indicator will flash accompanying with a buzzer

Energy saving tips

Energy saving tips
 Make sure the appliance is properly ventilated (see INSTALLATION).
 Do not install the appliance in direct sunlight or in the near of heat sources (e.g. stoves, heaters).
 Avoid unnecessarily low temperature in the appliance. The energy consumption increases the lower the temperature in the appliance is set.
 Functions like SUPER-FREEZE or SUPER-COOL consume more energy.
 Allow warm food to cool down before placing it in the appliance.
 Open the appliance door as little and as brie ly as possible.
 Do not over ill the appliance to avoid obstructing the air low.
 Avoid air within the food packaging.
 Keep door seals clean so that the door always closes correctly.
 Defreeze frozen food in the fridge storage compartment.
 The most energy-saving configuration requires drawer, food box and shelves to be positioned in the appliance on factory-fresh condition, and food to be placed without blocking the air outlet of the duct.

Replacing the LED-lamps
Replaceable (LED only) light source by a professional
This product contains a light source of energy efficiency class G.

Equipment

Notice: Differences depending on model
Due to different models, your product may not have all of the following features. Please refer to chapter PRODUCT DESCRIPTION.

7.1 Lateral air-flow
The refrigerator is equipped with a Lateral air-flow system, with which cool air flows are located on every shelf level (Fig. 7.1). This helps to maintain a uniform temperature to ensure that your food is kept fresher for longer.

7.2 Adjustable shelves
The height of the shelves can be adjusted to fit your storage needs.
1. To relocate a shelf, remove it first by uplifting its hind edge (1) and pulling it out (2) (Fig. 7.2).
2. To reinstall it, put it on the lugs on both sides and push it to the most rearward position until the rear of the shelf is fixed inside the slots in the sides
Notice: Shelves
Ensure that all ends of a shelf are level.

7.3 Removable door racks
The door racks can be removed for cleaning:
Place hands on each side of the rack, lift it upwards (1) and pull it out (2) (Fig. 7 3).
In order to insert the door rack, the above steps are carried out in reverse order.

7.4 My Zone drawer
For use and setting of the My Zone compartment (Fig. 7.4) please check section USE (My Zone drawer).

Troubleshooting

Many occuring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE.

WARNING!
 Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
 Electrical equipment should be serviced only by qualified electrical experts, because improper repairs can cause considerable consequential damages.
 A damaged supply should only be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Installation

WARNING!
 The appliance is heavy. Always handle with at least two persons.
 Keep all packaging materials out of children’s reach and dispose them in an
environmentally friendly manner.
 Take the appliance out of the packaging
 Remove all packaging materials.
10.1 Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can influence
the temperature inside the appliance and its energy consumption. Do not install the
appliance near other heat-emitting appliances (ovens, refrigerators) without isolation.
10.2 Door reversibility
(Only model HTW7720ENMP/HTW7720ENMB)
Before the appliance is permanently installed, check the correct position of the door
hinge. If necessary see section the DOOR REVERSIBILITY
10.3 Space requirement
Required space when door is opened (Fig. 10.4)

10.4 Ventilaton cross-section
To achieve sufficient ventilation of the appliance for safety reasons, the information of the required ventilation cross sections must be observed (Fig 10.5)
For a free standing appliance: this refrigerating appliance is not intended to be used as a built-in appliance.

10.5 Aligning the appliance
The appliance should be placed on a flat and solid surface.

1. Tilt the appliance slightly backwards (Fig. 10.5).
2. Set the feet to the desired level.
3. The stability can be checked by alternately bumping on the diagonals. The slightly swaying should be the same in both directions. Otherwise the frame can warp; possible leaking door seals are the result. A low tendency to the rear facilitates the closing of the door.

10.6 Fine tuning of the doors
If the doors are not in one level, this mismatch can be remedied by following.

10.6.1 Using adjustable foot
Rotate the adjustable foot according to the direction of arrow i(Fig. 10.6 -1) to turn up or down the foot.

Documents / Resources

Haier HTW7720 Series Built in Refrigerator [pdf] User Guide
ENPT, DNMP, ENMB, HTW7720 Series Built in Refrigerator, HTW7720 Series, Built in Refrigerator, Refrigerator

References

Leave a comment

Your email address will not be published. Required fields are marked *