ZERO ROBOTICS Hover 2
KARSHEVIEW
- Don ƙarin bayani, da fatan za a sauke littafin mai amfani daga hukuma website.
- Wannan jagorar tana iya canzawa ba tare da sanarwa ta gaba ba. Da fatan za a ziyarci jami'in webshafin don ƙarin cikakkun bayanai.
- Ana samun bayanin takaddun shaida akan Gida > Saituna > Shafin bayanin yarda
- ID na CMIIT: 2019AP7432 FCC ID: 2AIDWZR-100A
- Dangane da canje-canjen buƙatun kasuwa ko shirin samarwa, Shenzhen Zero Zero Infinity Technology Co., Ltd. na iya canza ƙayyadaddun samfuran da bayyanar. Da fatan za a tuntuɓe mu idan kuna da wasu tambayoyi.
Cajin Matukin Dabino
- Toshe kebul na caji cikin tashar USB-C.
- Yana ɗaukar kimanin awa 2.5 don cika caji.
Haɗa Hover 2
- Latsa ka riƙe maɓallin wuta na tsawon daƙiƙa 2 don kunnaPalmPilot. Sa'an nan, zaɓi kuma haɗa zuwa Hover 2 hotspot tare da Direction Control Stick (danna ƙasa don zaɓar).
- Idan ba a sami Hover 2 hotspot ba, danna ka riƙe maɓallin kunna Wi-Fi / RC akan drone don 4s, kuma sake gwada haɗawa bayan jin ƙarar.
Takeoff Hover 2
- Matsa Wutar Kula da Altitude sama na daƙiƙa 2 don tashiwa.
Saukowa Hover 2
- Tura Motar Kula da Altitude zuwa ƙasa har sai Hover 2 ya sauka a ƙasa, riƙe na tsawon daƙiƙa 2 don tsayar da farfesa.
Sarrafa Hover 2
Dokokin FCC FCC
Wannan kayan aikin ya dace da sashi na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
- dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.
An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Bayanin Bayyanar RF (SAR) SAR
Wannan na'urar ta cika ka'idojin gwamnati don fallasa igiyoyin rediyo. An ƙera wannan na'urar don kada ta ƙetare iyakokin fitarwa don ɗaukan ƙarfin mitar rediyo (RF). Ma'aunin bayyanarwa don na'urar mara waya tana ɗaukar naúrar ma'aunin da aka sani da Specific Absorption Rate, ko SAR. Don aikin sawa na jiki, an gwada wannan na'urar kuma ta cika ka'idojin fiddawa na FCC RF don amfani tare da na'urar da ba ta ƙunshe da ƙarfe ba kuma a sanya aƙalla 1.0 cm daga jiki.
Bayanan Bayani na FCC
Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Takardu / Albarkatu
 |
ZERO ROBOTICS Hover 2 [pdf] Manual mai amfani ROBOTICS Hover 2, ROBOTICS, Hover 2 |
