Katin Shigar da Fasaha na KW-11m
Bayanin samfur
- Katin shigar da KW-11m na'ura ce da aka ƙera don hawa kan dogo na DIN.
- Yana sauƙaƙe musayar bayanai tsakanin firikwensin, na'urorin haɗi, da na'urar Sinum Central ta hanyar sadarwar waya.
Umarnin Amfani da samfur
- Samar da wutar lantarki: Yana nuna halin wuta.
- Sadarwa 1-4: Yana nuna matsayin sadarwa tare da na'urorin da aka haɗa.
- Matsayin shigarwar jihohi biyu: Yana nuna matsayin abubuwan shigar jihohi biyu.
- Kunna Yanayin Ganewa a Saituna> Na'urori> Na'urorin SBUS> +> Yanayin Ganewa shafin.
- Riƙe maɓallin rajista akan na'urar don 3-4 seconds.
- Na'urar da aka haskaka zata bayyana akan allon.
Gabatarwa
- Katin shigar da KW-11m na'ura ce da ke yin musayar bayanai tsakanin na'urori da na'urorin da ke da alaƙa da katin da na'urar Sinum Central.
- An ƙera shi don hawa akan dogo na DIN. Ana yin sadarwa tare da na'urar tsakiya ta Sinum ta waya.
Bayanin hasken wuta
Tushen wutan lantarki
Sadarwa- 1-4 Matsayin shigarwar jihohi biyu
Bayanin masu haɗawa
- Maɓallin rajista
- Mai haɗa sadarwar SBUS
- Mai haɗa abubuwan shigar da jihohi biyu (+24V)
- Mai haɗa firikwensin NTC (1-4)
- 0-10V i 1-Wire abubuwan shigar da kayan haɗi
Yadda ake yin rijistar na'urar a cikin tsarin sinum
- Ya kamata a haɗa na'urar zuwa na'urar tsakiya ta Sinum ta amfani da SBUS connector 2, sannan a shigar da adireshin Sinum Central na'urar a cikin mai binciken kuma shiga cikin na'urar.
- A cikin babban kwamiti, danna Saituna> Na'urori> Na'urorin SBUS> +> Ƙara na'ura.
- Sannan, a taƙaice danna maɓallin rajista 1 akan na'urar.
- Bayan an kammala aikin rajistar yadda ya kamata, akan allon za a buɗe taga don ayyana aikin kowane shigarwar jihohi biyu (maɓalli ko shigarwar jihohi biyu).
- Bugu da ƙari, a ƙarshen rajista, mai amfani zai iya sanya wa na'urar suna kuma ya sanya ta zuwa wani ɗaki.
Yadda ake gane na'urar a cikin tsarin Sinum
- Don gano na'urar a cikin Sinum Central, kunna Yanayin Identification a cikin Saituna> Na'urori> Na'urorin SBUS> +> Yanayin Identification shafin kuma riƙe maɓallin rajista akan na'urar na tsawon daƙiƙa 3-4.
- Za a haskaka na'urar da aka yi amfani da ita akan allon.
Bayanan fasaha
- Tushen wutan lantarki: 24V DC ± 10%
- Max. amfani da wutar lantarki: 1,5W
- Yanayin aiki: 5°C ÷ 50°C
- NTC Sensor Juriya na thermal: -30°C ÷ 50°C
Bayanan kula
- Masu kula da TECH ba su da alhakin duk wani lahani da aka samu sakamakon rashin amfani da tsarin.
- Mai sana'anta yana da haƙƙin haɓaka na'urori, sabunta software da takaddun bayanai masu alaƙa.
- An ba da zane-zane don dalilai na hoto kawai kuma suna iya bambanta kaɗan da ainihin kamanni.
- Jadawalin suna aiki azaman examples.
- Ana sabunta duk canje-canje akan ci gaba akan masana'anta website.
- Kafin amfani da na'urar a karon farko, karanta waɗannan ƙa'idodi a hankali.
- Rashin yin biyayya ga waɗannan umarnin na iya haifar da rauni na mutum ko lalacewar mai sarrafawa.
- ƙwararren mutum ne ya sanya na'urar.
- Ba a nufin yara su sarrafa shi ba.
- Na'urar lantarki ce mai rai.
- Tabbatar cewa an cire haɗin na'urar daga na'ura mai ba da hanya tsakanin hanyoyin sadarwa kafin yin duk wani aiki da ya shafi wutar lantarki (toshe igiyoyi, shigar da na'urar, da sauransu).
- Na'urar ba ta da tsayayyar ruwa.
Maiyuwa ba za a zubar da samfurin zuwa kwantenan sharar gida ba. Wajibi ne mai amfani ya canja wurin kayan aikin da aka yi amfani da su zuwa wurin tarawa inda za a sake yin amfani da duk kayan lantarki da na lantarki.
Sanarwa ta EU na daidaituwa
Tech Sterowniki II Sp. zo ,ul. Biała Droga 34, Wieprz (34-122) Ta haka, muna bayyana ƙarƙashin alhakin mu kawai cewa KW-11m ya dace da umarni:
- 2014/35/EU
- 2014/30/EU
- 2009/125/WE
- 2017/2102/EU
Don kimanta yarda, an yi amfani da ma'auni masu jituwa:
- PN-EN IEC 60730-2-9:2019-06
- PN-EN 60730-1: 2016-10
- EN IEC 63000: 2018 RoHS
Laraba, 01.06.2023
TUNTUBE
- Cikakkun rubutun na sanarwar EU da kuma jagorar mai amfani suna samuwa bayan bincika lambar QR ko a www.tech-controllers.com/manuals
- Anyi a Poland
- lambar waya: +48 33 875 93 80 www.tech-controllers.com
- support.sinum@techsterowniki.pl
FAQ
- Ta yaya zan zubar da samfurin?
- Kada a zubar da samfurin a cikin kwantena sharar gida. Da fatan za a canja wurin kayan aikin da aka yi amfani da su zuwa wurin tattarawa don sake yin amfani da kayan lantarki da na lantarki.
Takardu / Albarkatu
 |
Katin Shigar da Fasaha na KW-11m [pdf] Jagoran Jagora Katin shigarwar KW-11m, KW-11m, Katin shigarwa, Kati |