FASAHA MASU MULKI EU-WiFi 8s Mai Kula da Dakin Intanet

Bayanin samfur

Ƙayyadaddun bayanai

• Sunan samfur: EU-WiFi 8s
• Mai jituwa tare da masu kunna wutar lantarki STT-868/STT-869 (Sigar software 2.1.8 da kuma daga baya)
• Sarrafa har zuwa 6 actuators kowane yanki
• Yana goyan bayan yankunan dumama 8
• An sanye shi da ƙarin lamba don kunnawa/kashe ƙarin na'ura

Umarnin Amfani da samfur

Tsaro
Tabbatar cewa mai sarrafa yana hawa da kyau kuma yana da tsabta idan ƙura ko datti. Koyaushe kashe wutar lantarki kafin aiki akan mai sarrafawa don hana girgiza wutar lantarki.

Bayanin na'ura
Mai kula da EU-WiFi 8s na'urar mara waya ce ta kan layi wacce aka ƙera don sarrafa masu kunna wutar lantarki don kiyaye yawan zafin jiki a cikin ɗakuna. Yana tallafawa har zuwa 6 actuators kowane yanki kuma yana da ƙarin fasali kamar kunnawa / kashe ƙarin na'ura kamar tukunyar gas.

Shigarwa
ƙwararren mutum ya kamata ya shigar da mai sarrafawa. Bi zane-zanen wayoyi da aka bayar a cikin littafin, haɗa wayoyi a daidai tsari, kuma tabbatar da cewa an haɗa kebul na wutar lantarki zuwa tashar USB Micro.

Farko Fara-Up

1. Saita haɗin Intanet
2. Sanya firikwensin waje (na zaɓi)
3. Sanya na'urori masu auna firikwensin daki da masu sarrafawa
4. Saita masu sarrafa thermostatic mara waya ta STT-868/STT-869
5. Sanya firikwensin taga (na zaɓi)

Yadda ake Sanya Sensor na Waje
Don saita firikwensin waje, yi rijista a cikin EU-WiFi 8s mai sarrafa ta zaɓi shi a cikin Babban menu> Firikwensin waje> Rajista. Danna maɓallin sadarwa akan firikwensin waje sau ɗaya a taƙaice don kunna rajista.

Yadda Ake Daidaita Sensors na Zazzabi da Masu Gudanar da Daki
Bi umarnin da aka bayar a cikin jagorar don saita firikwensin zafin jiki da masu kula da ɗaki don ingantaccen aiki na mai sarrafawa.

TSIRA

Kafin amfani da na'urar a karon farko mai amfani yakamata ya karanta waɗannan ƙa'idodi a hankali. Rashin bin ƙa'idodin da aka haɗa a cikin wannan jagorar na iya haifar da rauni na mutum ko lalacewar mai sarrafawa. Ya kamata a adana littafin littafin mai amfani a wuri mai aminci don ƙarin tunani. Don kauce wa hatsarori da kurakurai, ya kamata a tabbatar da cewa kowane mutumin da ke amfani da na'urar ya fahimci ka'idar aiki da kuma ayyukan tsaro na mai sarrafawa. Idan za a sanya na'urar a wani wuri na daban, tabbatar cewa an adana littafin jagorar mai amfani tare da na'urar ta yadda kowane mai amfani ya sami damar samun mahimman bayanai game da na'urar. Mai sana'anta baya karɓar alhakin duk wani rauni ko lalacewa sakamakon sakaci; don haka, masu amfani dole ne su ɗauki matakan tsaro da suka dace da aka jera a cikin wannan littafin don kare rayukansu da dukiyoyinsu.

GARGADI

• Na'urar lantarki mai rai! Tabbatar cewa an cire haɗin mai sarrafawa daga na'urorin sadarwa kafin yin duk wani aiki da ya shafi wutar lantarki (toshe igiyoyi, shigar da na'urar da dai sauransu).
• ƙwararren ma'aikacin lantarki ne ya sanya na'urar.
• Bai kamata yara su sarrafa mai sarrafa ba.
• Ana iya lalata na'urar idan walƙiya ta faɗo. Tabbatar cewa filogi ya katse daga wutar lantarki yayin hadari.
• Duk wani amfani banda fayyace ta masana'anta haramun ne.
• Kafin da lokacin lokacin dumama, yakamata a bincika mai sarrafawa don yanayin igiyoyinsa. Hakanan ya kamata mai amfani ya bincika idan mai sarrafawa yana da kyau kuma ya tsaftace shi idan ƙura ko datti.

Canje-canje a cikin hajar da aka kwatanta a cikin jagorar ƙila an gabatar da ita bayan kammala ta a ranar 11.08. 2022. Mai ƙira yana riƙe da haƙƙin gabatar da canje-canje ga tsari ko launuka. Misalan na iya haɗawa da ƙarin kayan aiki. Fasahar bugawa na iya haifar da bambance-bambance a cikin launukan da aka nuna.

Mun himmatu wajen kare muhalli. Kera na'urorin lantarki yana ɗora alhakin samar da amintaccen zubar da kayan aikin lantarki da aka yi amfani da su. Don haka, an shigar da mu cikin rajistar da Hukumar Inspection for Environmental Protection ta ajiye. Alamar kwandon da aka ketare akan samfur na nufin cewa ƙila ba za a zubar da samfurin a kwantena na sharar gida ba. Sake amfani da sharar gida yana taimakawa wajen kare muhalli. Wajibi ne mai amfani ya canja wurin kayan aikin da aka yi amfani da su zuwa wurin tarawa inda za a sake yin amfani da duk kayan lantarki da na lantarki.

BAYANIN NA'URA

EU-WiFi 8s mai sarrafawa shine na'urar mara waya ta kan layi don sarrafa masu kunna wutar lantarki STT-868/STT-869 ( sigar software 2.1.8 kuma daga baya) (har zuwa 6 actuators kowane yanki). Babban aikinsa shine kula da yawan zafin jiki a cikin ɗakuna tare da yin amfani da masu kunnawa don yankuna 8 na dumama. An sanye da mai sarrafawa tare da ƙarin lamba don kunnawa / kashe ƙarin na'ura (misali tukunyar gas).

Ayyuka masu sarrafawa:

• Sarrafa har zuwa yankuna 8 tare da amfani da:
  • ginanniyar firikwensin zafin jiki
  • firikwensin waya
  • yuwuwar haɗa 8 ƙarin na'urori masu auna firikwensin C-8r, C-mini ko masu kula da daki R-8b, R-8z ko R-8bw (sigar software 2. 1. 19 da kuma daga baya)
• NO/NC relay fitarwa (misali don sarrafa na'urar dumama wanda aka kunna lokacin da zafin ɗakin ya yi ƙasa da ƙasa)
• Yiwuwar haɗawa har zuwa 6 masu kunna wutar lantarki mara waya ta STT-868 ko STT-869 a kowane yanki (sigar software 2.1.8 da kuma daga baya)
• Sabunta software ta hanyar USB
• Kowane yanki na iya sanya yanayin aiki na mutum ɗaya (zazzabi na yau da kullun, ƙayyadaddun lokaci ko jadawalin aiki 6)
• Mai jituwa tare da firikwensin waje mara waya ta C-8zr
• Mai jituwa tare da na'urori masu auna firikwensin taga C-2n (har zuwa na'urori 6 a kowane yanki)

Kayan aikin sarrafawa: 

• Wutar lantarki 5V
• Fitar firikwensin C-7p

Ana iya sarrafa tsarin dumama ta hanyar a web aikace-aikace a www.emodul.eu. Ana iya sauke aikace-aikacen eModul daga kantin sayar da Google Play.

KA'IDAR AIKI

Mai kula da EU-WiFi 8s yana yanke shawarar idan yankin da aka bayar yana buƙatar mai zafi bisa ƙimar yanayin zafin da aka aiko ta wurin firikwensin ɗakin (C-8r, C-mini ko C-7p) ko mai sarrafa ɗakin (R-8b, R-8z, R-8bw (sigar software 2. 1. 19 da kuma daga baya)), da kuma aikin mutum ɗaya na yankin. Idan dumama ya zama dole, EU-WiFi 8s mai kula yana kunna voltage-free lamba, wanda za a iya amfani da misali domin sarrafa dumama na'urar, da kuma bude actuators rajista a cikin wani yanki da aka ba. Ana watsa siginar daga kowane yanki zuwa mai kula da EU-WiFi 8s ta hanyar masu sarrafa ɗaki ko na'urori masu auna ɗaki. Suna sadarwa tare da mai sarrafawa ta siginar rediyo. Kowace yanki ana iya sanya masu kunna bawul mara waya ta STT-868/STT-869 (sigar 2.1.8 da kuma daga baya), waɗanda ke buƙatar rajista.

YADDA AKE SHIGA CONTROLER

ƙwararren mutum ya kamata ya shigar da mai sarrafawa.

GARGADI
Hadarin girgizar wutar lantarki mai mutuwa daga taɓa haɗin kai. Kafin aiki akan mai sarrafawa kashe wutar lantarki kuma hana shi kunnawa da gangan.

Cire murfin mai sarrafawa kuma haɗa wayoyi suna bin zane-zanen da ke ƙasa da alamun haɗin haɗin. A kiyaye oda mai zuwa:

• kebul na samar da wutar lantarki zuwa tashar USB Micro
• ƙarin na'urar

GARGADI
Idan mai yin famfo yana buƙatar babban canji na waje, fis ɗin samar da wutar lantarki ko ƙarin sauran na'urar da aka zaɓa don karkatattun igiyoyin ruwa ana ba da shawarar kada su haɗa famfo kai tsaye zuwa abubuwan sarrafa famfo.
Don guje wa lalacewa ga na'urar, dole ne a yi amfani da ƙarin da'irar aminci tsakanin mai sarrafawa da famfo. Mai sana'anta yana ba da shawarar adaftar famfo na ZP-01, wanda dole ne a siya daban.

Jadawalin tsari na wayoyi da sadarwa tsakanin na'urorin tsarin dumama:

• Yankin S1 - ginanniyar firikwensin zafin jiki (mai sarrafa har zuwa 6 x STT-868, STT-869 tare da sigar software 2.1.8 kuma daga baya) ko mara waya
• Yankin S2 - firikwensin zafin jiki mai waya (mai sarrafa har zuwa 6 x STT-868, STT-869 tare da sigar software 2.1.8 kuma daga baya) ko S mara waya
• Yankin 3-S8 - firikwensin zafin jiki mara waya (mai sarrafa har zuwa 6 x STT-868, STT-869 tare da sigar software 2.1.8 da kuma daga baya).

FARKON FARKO

Domin mai sarrafa ya yi aiki da kyau, bi waɗannan matakan yayin farawa da farko:

1. Saita haɗin Intanet
2. Sanya firikwensin waje (na zaɓi)
3. Sanya na'urori masu auna firikwensin dakin, masu kula da daki
4. Saita masu kunna wutar lantarki mara waya ta STT-868/STT-869 (tare da sigar mai sarrafawa 2.1.8 kuma daga baya)
5. Sanya firikwensin taga (na zaɓi)

YADDA AKE SABATAR DA HANYAR INTERNET

EU-WiFi 8s yana da ginanniyar tsarin Intanet, wanda ke ba mai amfani damar sarrafa tsarin dumama ta Intanet. Da farko, haɗa zuwa Intanet ta zaɓi cibiyar sadarwar WiFi ta ku a Menu > Zaɓin hanyar sadarwar WiFi. Irin waɗannan sigogi kamar Adireshin IP, Mashin IP, Adireshin Ƙofar ƙila za a iya saita su da hannu ko yana yiwuwa a kunna zaɓi na DHCP (wanda aka kunna ta tsohuwa).

Na gaba, je zuwa www.emodul.eu kuma ƙirƙirar asusunku. Bayan zabar a cikin menu mai sarrafawa, tsarin yana haifar da lamba wanda dole ne a shigar da shi shafin emodul.eu website (modul rajista).

YADDA AKE SANTA EXTERNAL SENSOR

Wajibi ne don yin rajistar firikwensin waje ta zaɓi a cikin EU-WiFi 8s mai sarrafawa (Babban menu> Firikwensin waje> Rajista) da latsa maɓallin sadarwa akan firikwensin waje (danna maɓallin a taƙaice sau ɗaya).

Tsarin rajista yana kunna firikwensin waje ta atomatik. Da zarar an yi rajista, ana iya kashe firikwensin a kowane lokaci ta zaɓi .

NOTE

• Na'urar firikwensin waje baya shiga cikin tsarin sarrafawa.
• Kashe firikwensin a cikin menu na firikwensin waje yana katse sadarwar kawai (ba a ƙara nuna zafin jiki na waje akan allon mai sarrafa waje). Ba ya kashe firikwensin waje kanta - yana ci gaba da aiki har sai baturin ya kwanta.

YADDA AKE GABATAR DA SANSORAWAR AZUMI DA MATSALAR DAKI

Don ba da damar EU-WiFi 8s don sarrafa yankin da aka bayar, ya zama dole a samar masa da ƙimar zafin jiki na yanzu. Hanya mafi sauƙi ita ce amfani da C-8r ko C-mini zafin firikwensin. Idan mai amfani yana so ya sami damar canza ƙimar zafin jiki da aka riga aka saita kai tsaye daga yankin, yana da kyau a yi amfani da R-8b, R-8z ko R-8bw mai kula da ɗakin (software version 2.1.19 da kuma daga baya). Ko da irin nau'in firikwensin zafin jiki / mai kula da ɗakin da aka zaɓa, dole ne a yi rajista a wani yanki na musamman a cikin menu na EU-WiFi 8s mai sarrafawa.

Domin yin rijistar firikwensin / mai kula da daki, je zuwa menu na yanki na yanki da aka bayar kuma zaɓi Rijista (Zone / Rajista). Bayan haka, danna maɓallin sadarwa wanda za'a iya samuwa a bayan zaɓin firikwensin zafin jiki / mai kula da daki (a cikin yanayin C-8r, C-mini, R-8b, R-8z da R-8bw (sigar software 2.1.19 da kuma daga baya), danna maɓallin sau ɗaya a takaice). Idan an kammala aikin cikin nasara, nunin mai sarrafa EU-WiFi 8s yana nuna saƙon da ya dace. In ba haka ba, dole ne a sake gudanar da tsarin.

NOTE
Ana iya sanya firikwensin daki ɗaya kawai ga kowane yanki.

• Yanki 1 shine yankin da aka shigar da EU-WiFi 8s - aikinsa ya dogara ne akan karatun daga na'urar firikwensin ciki.
• Yanki 2 yana amfani da karatu daga firikwensin zafin jiki mai waya da aka haɗa zuwa EU-WiFi 8s mai sarrafa. Mai amfani na iya canza nau'in firikwensin zuwa mara waya a cikin waɗannan yankuna a cikin yankin MENU (MENU -> Yankuna -> Yanki 1 -> Nau'in firikwensin).

Dole ne a kiyaye waɗannan dokoki masu zuwa: 

• Ana iya yin rijistar firikwensin zafin jiki ɗaya a kowane yanki.
• Da zarar an yi rajista, firikwensin ba zai iya zama mara rijista ba, amma kawai a kashe ta zaɓin KASHE a cikin menu na yanki na yankin da aka bayar.
• Idan mai amfani yayi ƙoƙarin sanya firikwensin zuwa yankin da aka riga aka sanya sauran firikwensin, firikwensin farko ya zama mara rijista kuma ana maye gurbinsa da ɗayan.
• Idan mai amfani ya yi ƙoƙarin sanya firikwensin da aka riga aka sanya shi zuwa wani yanki na daban, firikwensin ba shi da rijista daga yankin farko kuma ya yi rajista a ɗayan.

Yana yiwuwa a saita ƙimar zafin jiki da aka saita na kowane mutum da jadawalin mako-mako don kowane firikwensin ɗakin da aka ba shi yankin da aka ba. Za a iya daidaita yanayin zafin yankin da aka riga aka saita a cikin menu mai sarrafawa (Babban menu / Yankuna). Saitunan jadawalin mako-mako da ƙimar da aka riga aka saita za a iya daidaita su ta hanyar www.emodul.eu

YADDA AKE GABATAR DA WIRELESS THERMOSTATIC ACTUATORS STT-868/STT-869 (SOFTWARE VERSION2.1.8 DA BAYA)

Mataki na gaba ya ƙunshi yin rijistar mai kunnawa da aka ba a yankin.

NOTE
Matsakaicin masu kunnawa guda 6 ana iya yin rijista a kowace shiyya.

Tsarin yin rajista:

1. Sanya thermostatic actuator akan radiator kuma jira har sai ya daidaita.
2. Je zuwa menu na EU-WiFi 8s, zaɓi lambar yanki inda za a yi rajistar mai kunnawa kuma zaɓi Masu kunnawa/Rijista.
3. Danna maɓallin rajista akan mai kunnawa a cikin daƙiƙa 120 daga zaɓar zaɓin Rijista. Bayan wannan lokacin EU-WiFi 8s suna ɗaukar ƙoƙarin yin rajista a matsayin wanda bai yi nasara ba.
4. Idan an kammala aikin rajista cikin nasara, nuni yana nuna saƙon da ya dace. Idan akwai kurakurai, nuni yana nuna saƙon da ya dace. Akwai yuwuwar musabbabin kurakurai guda 2 a cikin tsarin rajista:
   • yunƙurin yin rajista fiye da 6 actuators
   • babu sigina daga mai kunna bawul a cikin tsawon daƙiƙa 120

YADDA AKE TSAYA HANYAR GINI
Domin yin rijistar firikwensin taga, zaɓi 'Rijista' (Babban menu -> ) kuma danna maɓallin sadarwa a taƙaice akan firikwensin taga. Saki maɓallin kuma duba hasken sarrafawa:

• sarrafa hasken walƙiya sau biyu - ingantaccen sadarwa kafa
• sarrafa hasken wuta yana ci gaba da haskakawa - babu sadarwa tare da babban mai sarrafawa

Sadarwar WIRless

Mai kula da EU-WiFi 8s na iya sadarwa ta waya tare da wasu na'urori:

BAYANIN BAYANIN ALAMOMIN

1. Nunawa
2. fita – a cikin babban allo view ana amfani da shi don buɗe allo view menu na zaɓi. A cikin menu na mai sarrafawa ana amfani da shi don soke saitunan kuma fita daga menu na ƙasa.
3. PLUS – a cikin babban allo view ana amfani dashi view matsayin shiyyar gaba. A cikin menu mai sarrafawa ana amfani dashi don view mai sarrafawa yana aiki kuma yana ƙara ƙimar yayin gyara sigogi.
4. RAUNA – a cikin babban allo view ana amfani dashi view matsayin shiyyar da ta gabata. A cikin menu mai sarrafawa ana amfani dashi don view mai sarrafawa yana aiki kuma yana rage ƙimar yayin gyara sigogi.
5. MENU – ana amfani dashi don shigar da menu mai sarrafawa kuma tabbatar da sabbin saitunan

BAYANIN BAYANIN ALAMOMIN - YANKI

1. Ƙarfin siginar WiFi
2. Ƙarin gunkin na'ura - yana nunawa lokacin da na'urar ke kunne.
3. Zazzabi na waje
4. Lokaci na yanzu
5. Bayanin yanki:
   Lambobin da aka nuna suna wakiltar firikwensin ɗakin yana aika karatun zafin jiki na yanzu daga yankin da aka bayar. Idan akwai ƙararrawa a yankin da aka bayar, allon yana nuna saƙon da ya dace. Idan lambar tana walƙiya, yankin da ya dace yana buƙatar dumama.
   Domin yi view sigogin aiki na yanzu na yankin da aka bayar, haskaka lambar ta ta amfani da maɓallan PLUS ko MINUS.
   Idan alamar taga ta nuna maimakon lambobi, yana nufin cewa taga a yankin yana buɗe kuma an kashe dumama.
6. Nau'in jaddawalin mako-mako na yanzu ko Lokacin da ya rage kafin canji na gaba na saita zafin yanki da hannu
7. Matsayin baturi a cikin firikwensin ɗakin C8-r ko C-mini ko a cikin mai sarrafa ɗaki (R-8b, R-8bw) a cikin yankin da aka ba (lamba mai haske a mashigin bayanin yanki - duba: bayanin no 5).
8. Ƙarfin siginar firikwensin ɗakin C8-r ko C-mini ko mai kula da ɗakin R-8b, R-8z, R-8bw (sigar software 2.1.19 da kuma daga baya) a cikin yankin da aka ba (lamba mai haske a cikin mashaya bayanin yanki - duba: bayanin no 5).
9. Yanayin zafin yankin da aka riga aka saita (lamba mai haske a mashigin bayanin yankin - duba: bayanin no 5).
10. Yanayin zafin yanki na yanzu (lamba mai haske a cikin sandar bayanin yankin - duba: bayanin no 5).
11. Alamar da ke nuna dumama aiki a cikin yankin da aka bayar (lamba mai haske a mashigin bayanin yankin - duba: bayanin no 5).

BAYANIN KYAUTA KYAUTA - WIFI

1. Ranar mako
2. Kwanan wata
3. Lokaci na yanzu
4. Ƙarfin sigina
5. Sunan cibiyar sadarwar WiFi

BAYANIN BAYANIN ALAMOMIN - SHINE 1

1. Ƙarfin siginar WiFi
2. Lokaci na yanzu
3. Kwanan wata
4. Yanayin zafin yankin da aka riga aka saita
5. Lokaci ya rage kafin canji na gaba na zafin da aka saita
6. Ƙarin gunkin na'ura - yana nunawa lokacin da na'urar ke kunne.
7. Yanayin dakin na yanzu

AYYUKAN MULKI

KASHE TSARI - MENU MAI SARKI

YANKI
Wannan ƙaramin menu yana bawa mai amfani damar saita sigogin aiki don wasu yankuna.

1. RAJIBI
   Ana samun aikin yin rajista don yankuna 3-8 da yankuna 1-2 idan an zaɓi nau'in firikwensin mara waya.
   Da zarar an kunna firikwensin ɗakin kuma an yi rajista a cikin wani yanki da aka bayar, mai kula da EU-WiFi 8s yana amfani da karatunsa. Za a iya kashe firikwensin ta hanyar yanke zaɓin ON.
2. ON
   Da zarar an kunna firikwensin ɗakin kuma an yi rajista a cikin wani yanki da aka bayar, mai kula da EU-WiFi 8s yana amfani da karatunsa. Za a iya kashe firikwensin ta hanyar yanke zaɓin ON.
3. TYPE NA SENSOR
   Ana samun wannan zaɓi don yanki na 1 da 2. Mai amfani yana zaɓar nau'in firikwensin tsakanin firikwensin ciki (ginin ciki ko firikwensin waya) da firikwensin mara waya.
4. KAFIN SATA ZAFIN
   Yanayin zafin yankin da aka saita ya dogara da saitunan jadawalin mako-mako. Koyaya, wannan aikin yana bawa mai amfani damar canza wannan ƙimar daban - ya zama dole don kashe jadawalin. Mai amfani zai iya saita yawan zafin jiki akai-akai ko na wani ƙayyadadden lokaci.
5. HYSTERESIS
   Ana amfani da wannan aikin don ayyana juriyar yanayin zafin da aka riga aka saita don hana jujjuyawar da ba'a so idan akwai ƙananan canjin zafin jiki (a cikin kewayon 0,1 ÷ 10⁰C) tare da daidaiton 0,1°C.
   Example: idan zafin da aka riga aka saita shine 23⁰C kuma hysteresis shine 0,5⁰C, ana ɗaukar zafin yankin yayi ƙasa sosai lokacin da ya faɗi zuwa 22,5⁰C.
6. RADDEWA
   Ana yin gyare-gyaren firikwensin ɗaki yayin hawa ko bayan an yi amfani da shi na dogon lokaci, idan yanayin yankin da aka nuna ya bambanta da ainihin zafin jiki. Kewayon daidaitawa shine daga -10⁰C zuwa +10⁰C tare da daidaiton 0,1⁰C.
7. ACTUATORS
   Ana amfani da wannan ƙaramin menu don daidaita aikin masu sarrafa thermostatic STT-868 ko STT-869 (Sigar mai sarrafawa 2.1.8 da kuma daga baya). A cikin kowane yanki yana yiwuwa a yi rajista har zuwa 6 actuators STT-868 ko STT-869 (mai sarrafawa 2.1.8 da kuma daga baya). An bayyana tsarin rajista dalla-dalla a cikin sashin farawa na farko. Domin cire duk masu kunna wuta daga yankin da aka bayar, zaɓi aikin cire actuator.
   Daga sigar software na actuator 1.1.0 a kunne, ana iya ganowa, saka idanu ko cire masu kunnawa guda ɗaya. Domin yin hakan, danna maɓallin da ke kan actuator kuma riƙe shi na kusan daƙiƙa 2 har sai nunin EU-WiFi 8s ya nuna kwamitin bayanai.

Saitunan - DAGA VESION 2.1.34
Ƙarƙashin menu na Saituna yana bawa mai amfani damar daidaita aikin masu kunna wuta. Yana yiwuwa a ayyana matsakaicin matsakaici da ƙaramar buɗewar actuator - waɗannan matakan buɗewa da rufewa ba za a taɓa wuce su ba.

Rage - siga wanda ke ƙayyade zafin ɗakin da bawul ɗin zai fara buɗewa da rufewa.
Ayyukan SIGMA yana ba da damar sarrafa santsi na bawul ɗin thermostatic. Da zarar an kunna aikin, mai amfani kuma na iya ayyana ƙarami da matsakaicin matakin rufe bawul.

Exampda:

• Yanayin zafin yankin da aka riga aka saita: 23 C
• Mafi ƙarancin buɗewa: 30%
• Matsakaicin buɗewa: 90%
• Kewaye: 5 C
• Ciwon ciki: 2 C

A cikin sama exampHar ila yau, bawul ɗin thermostatic yana fara rufewa a zazzabi na 18˚C (ƙimar da aka riga aka saita ta rage Range: 23-5). Ana isa mafi ƙarancin buɗewa lokacin da zafin yankin ya kai ƙimar da aka riga aka saita.
Bayan kai ƙimar da aka riga aka saita, zafin jiki yana farawa faɗuwa. A zafin jiki na 21˚C (ƙimar da aka riga aka saita a cire hysteresis: 23-2) bawul ɗin yana fara buɗewa. Matsakaicin buɗewa yana kaiwa a zazzabi na 18˚C.

• Kariya - Idan zafin da aka riga aka saita ya wuce adadin digiri da aka ƙayyade a cikin siga, duk masu kunnawa a cikin yankin da aka bayar za a rufe su (0%). Wannan aikin yana aiki ne kawai lokacin da aikin SIGMA ya kunna.
• Yanayin gaggawa - Wannan yana ba da damar sauya buɗewar mai kunnawa da hannu idan an kunna ƙararrawa a cikin yankin (misali ta gazawar firikwensin ko kuskuren sadarwa mai sarrafa ɗaki). Idan mai sarrafa bai yi aiki daidai ba, saita buɗe mai kunnawa zai yiwu ta hanyar babban mai sarrafa ko aikace-aikacen wayar hannu (Internet).

Idan mai sarrafa ya yi aiki daidai, wannan yanayin ba zai shafi aikin masu kunnawa ba, saboda shi ne mai sarrafawa ke saita buɗewar su bisa yanayin zafin jiki. Idan akwai asarar wutar lantarki a cikin mai sarrafawa, za a canza masu kunnawa zuwa matsayin da suka dace, kamar yadda aka saita a cikin manyan sigogi.

SENSORS TA GINI

• Rijista – Domin yin rijistar firikwensin, zaɓi 'Registration' kuma danna maɓallin sadarwa da sauri akan firikwensin taga. Saki maɓallin kuma duba hasken sarrafawa:
  • Hasken sarrafawa yana walƙiya sau biyu - ingantaccen sadarwa kafa
  • Hasken sarrafawa yana ci gaba da haskakawa - babu sadarwa tare da babban mai sarrafawa
• Sensor cirewa - Ana amfani da wannan aikin don cire na'urori masu auna firikwensin a cikin yankin da aka ba
• Bayani - wannan zaɓi yana samuwa ne kawai lokacin da aka yi rajistar firikwensin. Yana bawa mai amfani damar view duk na'urori masu auna firikwensin kuma duba iyakarsu da matakin baturi.
• Saituna - Ana amfani da wannan aikin don saita lokacin jinkiri. Lokacin da lokacin jinkirin da aka saita ya ƙare, babban mai sarrafawa yana aika bayanin zuwa ga masu kunnawa yana tilasta su rufe. Tsawon saita lokaci shine mintuna 0-30.

Exampda: An saita lokacin jinkiri a minti 10. Lokacin da aka buɗe taga, firikwensin yana aika bayanin zuwa babban mai sarrafawa. Idan firikwensin ya aika wani bayani cewa taga yana buɗe bayan mintuna 10, babban mai sarrafa zai tilasta masu kunnawa su rufe su kashe dumama a yankin da aka bayar.

NOTE
Idan an saita lokacin jinkiri a minti 0, za a aika saƙon da ke tilasta masu kunnawa rufewa nan take.

SENSOR NA WAJE
Yana yiwuwa a haɗa firikwensin zafin jiki na waje zuwa mai sarrafawa. Na'urar tana bawa mai amfani damar saka idanu akan zafin jiki na yanzu akan babban allo da kuma ta aikace-aikacen emodul.eu. Na'urar firikwensin waje baya shiga cikin tsarin sarrafawa.
Da zarar an shigar da firikwensin waje, dole ne a yi rajista a cikin EU-WiFi 8s mai kula - an bayyana tsarin rajista dalla-dalla a cikin sashin farawa na farko.

VOLTAGE-KYAUTA LAMBAR

1. YANKI
   Wannan menu yana bawa mai amfani damar zaɓar yankin wanda zai tasiri aikin ginannen voltage-free lamba. Idan ba a zaɓi yankin da aka bayar ba, mai sarrafawa da voltagBa a kunna lambar sadarwar kyauta ba idan yanayin zafi a wannan yanki ya yi ƙasa da ƙasa.
2. JINKIRIN FARUWA
   Mai sarrafawa yana kunna ƙarin lamba bayan lokacin jinkiri idan yanayin zafi a kowane yanki yana ƙasa da ƙimar da aka riga aka saita. Mai sarrafawa yana kashe lambar sadarwa bayan an kai ga zafin da aka saita.
3. KARIN TUNTUBE
   Wannan aikin yana bawa mai amfani damar yin rijistar tsarin MW-1 (voltage-free lamba) da MW-1-230V (voltage contact).
   Domin yin rijistar module, bi waɗannan matakan:
   1. danna maɓallin rajista a kan tsarin
   2. zaɓi 'Rijista' a cikin EU-WiFi 8s mai kula

FI TTER'S MAZAN U

INTERNET MODULE

Saitunan cibiyar sadarwa da ake buƙata
Domin tsarin Intanet ya yi aiki da kyau, dole ne a haɗa tsarin zuwa cibiyar sadarwa tare da uwar garken DHCP da tashar tashar jiragen ruwa ta 2000.
Bayan haɗa tsarin Intanet zuwa cibiyar sadarwar, je zuwa menu na saitunan tsarin (a cikin babban mai sarrafa).

Idan cibiyar sadarwar ba ta da uwar garken DHCP, sai an saita tsarin Intanet ta mai gudanarwa ta shigar da sigogi masu dacewa (DHCP, adireshin IP, adireshin Ƙofar, Mashin Subnet, adireshin DNS).

1. Jeka menu na saitunan tsarin Intanet.
2. Zaɓi "ON".
3. Bincika idan an zaɓi zaɓin "DHCP".
4. Je zuwa "Zaɓin hanyar sadarwar WIFI"
5. Zaɓi hanyar sadarwar WIFI ɗin ku kuma shigar da kalmar wucewa.
   1. Jira na ɗan lokaci (kimanin min 1) kuma duba idan an sanya adireshin IP. Je zuwa shafin "IP address" kuma duba idan darajar ta bambanta da 0.0.0.0 / -.-.-.-.
      • Idan darajar har yanzu 0.0.0.0 / -.-.-.-.- , duba saitunan cibiyar sadarwa ko haɗin Ethernet tsakanin tsarin Intanet da na'urar.
   2. Bayan an sanya adireshin IP, fara rajistar tsarin don samar da lamba wanda dole ne a sanya shi zuwa asusun da ke cikin aikace-aikacen.
      • ZABEN WIFI NETWORK
        Wannan ƙaramin menu yana ba da jerin samammun cibiyoyin sadarwa. Zaɓi cibiyar sadarwar kuma tabbatar ta latsa MENU. Idan cibiyar sadarwa tana da tsaro, dole ne a shigar da kalmar wucewa. Yi amfani da + da – don zaɓar kowane harafi na kalmar sirri kuma danna EXIT don kammala aikin.
      • GIRMAN NETWORK
        A al'ada, ana saita hanyar sadarwar ta atomatik. Mai amfani kuma na iya gudanar da shi da hannu ta amfani da sigogi masu zuwa na wannan menu na ƙasa: DHCP, Adireshin IP, Mashin Subnet, Adireshin Ƙofa, Adireshin DNS da adireshin MAC.
      • RAJIBI
        Zaɓi Rijista don samar da lambar da ake buƙata don yin rijistar EU-WiFi 8s mai kula a https://emodul.eu – duba: Farko farawa.
      • TSARI
        Ana amfani da wannan aikin don canza saitunan kulle iyaye. Bayan kunna aikin 'Lock Time', allon zai kulle bayan lokacin da aka saita a cikin ma'aunin 'Lock Time'. Mai amfani zai iya saita lambar PIN wanda za'a nema kafin shigar da menu na mai sarrafawa.
        NOTE
        Tsohuwar lambar PIN ita ce 0000.
   3. SAIRIN LOKACI
      Mai sarrafa yana zazzage lokaci da kwanan wata daga cibiyar sadarwa. Mai amfani kuma na iya saita lokaci da kwanan wata da hannu.
   4. SCREEN SEttings
      Ma'aunin da ke akwai a cikin wannan ƙaramin menu yana ba mai amfani damar tsara babban allo view. Yana yiwuwa a zaɓi sigogin da za a nuna: WiFi (allon yana nuna sunan cibiyar sadarwa da ƙarfin sigina) ko Yankuna (allon yana nuna ƙimar halin yanzu da ƙimar da aka riga aka saita a wasu yankuna).
      Mai amfani kuma na iya daidaita bambancin nuni da kuma hasken allo. Aikin barrancen allo yana bawa mai amfani damar daidaita hasken allo mara kyau. Lokacin ɓarkewar allo yana bayyana lokacin da ba shi da aiki bayan abin da allon ya tafi babu komai.
   5. HARSHE
      Ana amfani da wannan aikin don zaɓar nau'in harshe na menu mai sarrafawa.
   6. MENU na HIDIMAR
      Ya kamata a daidaita sigogin da ke cikin menu na sabis ta ƙwararrun masu dacewa kawai kuma ana samun damar shiga wannan menu tare da lamba.
   7. SIFFOFIN FARKO
      Ana amfani da wannan aikin don mayar da saitunan masana'anta na sigogi a cikin babban menu (ban da menu na sabis).
      NOTE
      Bayan zaɓar wannan aikin zai zama dole don saita haɗin Intanet. Idan an kunna wannan aikin, ana cire duk na'urori masu rijista daga ƙwaƙwalwar na'urar.

SHARHIN SOFTWARE
Ana amfani da wannan aikin don view sigar software mai sarrafawa.

YADDA AKE SAMUN TSARI NA DUFA ONLINE

Mu website www.emodul.eu yana ba da kayan aiki da yawa don sarrafa tsarin dumama ku. Domin daukar cikakken advantage na fasaha, ƙirƙirar asusun ku:

Yin rijistar sabon asusu a www.emodul.eu

Da zarar an shiga, je zuwa Saituna shafin kuma zaɓi Rijista module. Na gaba, shigar da lambar da mai sarrafa ya samar (don samar da lambar, zaɓi Rijista a cikin menu na EU-WiFi 8s mai sarrafawa). Za a iya sanya wa tsarin suna suna (a cikin filin da aka lakafta bayanin Module).

TAB GIDA

Shafin gida yana nuna babban allo tare da fale-falen fale-falen da ke nuna halin yanzu na takamaiman na'urorin tsarin dumama. Matsa kan tayal don daidaita sigogin aiki:

NOTE
Saƙon 'Babu sadarwa' yana nufin cewa sadarwa tare da firikwensin zafin jiki a wani yanki da aka bayar ya katse. Mafi yawan sanadi shine baturi mai kwance wanda ke buƙatar maye gurbin.

Taɓa kan tayal ɗin da ke daidai da yankin da aka bayar don gyara yanayin zafin da aka riga aka saita:

Ƙimar babba ita ce zafin yanki na yanzu yayin da ƙimar ƙasa ita ce zafin da aka saita. Yanayin zafin yankin da aka saita ya dogara ta tsohuwa akan saitunan jadawalin mako-mako. Yanayin zafin jiki na dindindin yana bawa mai amfani damar ayyana keɓantaccen ƙimar zafin jiki da aka saita wanda zai yi amfani da shi a yankin ba tare da la'akari da lokaci ba.
Zaɓin zafin jiki na dindindin yana yiwuwa a saita iyakokin lokaci.

Wannan yanayin yana bawa mai amfani damar saita ƙimar zafin jiki wanda zai yi amfani da shi kawai a cikin ƙayyadadden lokaci. Lokacin da lokacin ya ƙare, sake saita zafin jiki da aka riga aka saita ya dogara da saitunan jaddawalin mako-mako da ya gabata (jiddawa ko yawan zazzabi ba tare da iyakance lokaci ba.

Matsa gunkin Jadawalin don buɗe allon zaɓin jadawalin:

Akwai nau'ikan jadawalin mako-mako guda biyu a cikin EU-WiFi 8s mai sarrafa:

1. Jadawalin gida
   Jadawalin mako-mako ne da aka keɓe zuwa wani yanki na musamman. Da zarar mai kula da EU-WiFi 8s ya gano firikwensin ɗakin, ana sanya jadawalin ta atomatik zuwa yankin. Mai amfani zai iya gyara shi.
2. Jadawalin Duniya (Jadawalin 1..5)
   Ana iya sanya jadawalin duniya zuwa kowane yanki na yanki. Canje-canjen da aka gabatar a cikin jadawalin duniya sun shafi duk yankuna da aka kunna jadawalin duniya.

Bayan zabar jadawali danna Ok kuma ci gaba don gyara saitunan jadawalin mako-mako:

Gyara yana bawa mai amfani damar ayyana shirye-shirye guda biyu kuma ya zaɓi ranakun da shirye-shiryen zasu fara aiki (misali daga Litinin zuwa Juma'a da kuma karshen mako). Mafarin farawa don kowane shiri shine ƙimar zafin jiki da aka saita. Ga kowane shiri mai amfani na iya ayyana har zuwa lokuta 3 lokacin da zafin jiki zai bambanta da ƙimar da aka riga aka saita. Dole ne lokutan lokaci su zo tare. A wajen waɗannan lokutan lokutan zafin da aka riga aka saita zai yi amfani. Daidaiton ma'anar lokacin shine minti 15.

ZONES TAB

Mai amfani na iya tsara shafin gida view ta canza sunan yanki da gumaka masu dacewa. Don yin hakan, je zuwa shafin Yankuna.

KIdiddiga TAB
Shafin Statistics yana bawa mai amfani damar view Jadawalin zafin jiki na lokuta daban-daban misali 24h, sati daya ko wata. Hakanan yana yiwuwa view ƙididdiga na watannin baya:

SETTING TAB
Shafin Saituna yana bawa mai amfani damar yin rijistar sabon tsarin kuma ya canza adireshin imel ko kalmar wucewa:

SOFTWARE GASKIYA

NOTE
Za a gudanar da sabunta software ta ƙwararren mai dacewa kawai. Bayan an sabunta software ɗin, ba zai yiwu a dawo da saitunan da suka gabata ba.

Domin shigar da sabuwar software, dole ne a cire mai sarrafawa daga wutar lantarki. Bayan haka, saka filasha tare da sabuwar software a cikin tashar USB. Kunna mai sarrafawa. Bayan an gama sabunta software, mai sarrafawa zai sake farawa ta atomatik.

NOTE
Kar a kashe mai sarrafawa yayin sabunta software.

DATA FASAHA

Ƙayyadaddun bayanai	Daraja
Ƙarar voltage	5V DC
Yanayin aiki	5-50 ° C
Matsakaicin amfani da wutar lantarki	2W
Ci gaba mai yuwuwar rashin kyauta. ba . fita. kaya	230V AC / 0,5A (AC1) * 24V DC / 0,5A (DC1) **
Yawanci	868MHz
Watsawa	IEEE 802.11 b/g/n

• AC1 category: Load-lokaci ɗaya, mai juriya ko ɗan ƙara ƙarfin AC.
• Nau'in lodi na DC1: kai tsaye halin yanzu, resistive ko dan kadan inductive kaya.

TSARI DA ARARAWA

Na'urar tana tallafawa abubuwa masu zuwa a cikin yanki:

Ƙararrawa	Dalili mai yiwuwa	Yadda za a gyara shi
Ƙararrawar firikwensin da aka lalace (a cikin yanayin lalacewar firikwensin ciki)	Na'urar firikwensin ciki a cikin mai sarrafawa ya lalace.	Kira ma'aikatan sabis.
Babu sadarwa tare da firikwensin/mai sarrafa mara waya	– Babu iyaka – Babu batura – Batura masu lebur ne	– Sanya firikwensin/mai sarrafa a wani wuri daban – Saka batura zuwa firikwensin/mai sarrafa ƙararrawa tana kashe ta atomatik lokacin da aka kafa sadarwa.
STT-868 mai kunnawa ƙararrawa
Ƙararrawa mai kunnawa - ERROR #0 - ƙananan baturi	Baturin actuator lebur ne.	Sauya batura
Ƙararrawa mai kunnawa - KUSKURE #1 - yiwuwar lalacewa na inji ko sassan lantarki	Wasu sassa sun lalace	Kira ma'aikatan sabis
Ƙararrawa mai kunnawa - ERROR#2 - matsakaicin matsakaicin bugun jini ya wuce	- Babu fistan da ke sarrafa bawul – Yawan bugun jini (motsi) na bawul – An yi kuskure an saka mai kunnawa akan radiyo - Bawul ɗin da bai dace ba akan radiator	– Shigar da fistan mai sarrafa mai kunnawa – Duba bugun bawul – Shigar da actuator daidai – Maye gurbin bawul akan radiator
	– Bawul ya makale	- Duba aikin bawul – Maye gurbin bawul akan radiator – Duba bugun bawul
Ƙararrawa mai kunnawa - ERROR#3 - ƙananan motsin piston	- Bawul ɗin da bai dace ba akan radiator
	– Dan kadan bugun jini (motsi) na bawul
Ƙararrawa mai kunnawa - ERROR #4 - babu dawowar sadarwa (zuwa mai kunnawa)	– Daga cikin iyaka – Babu batura	– Mai kunnawa yayi nisa da mai sarrafawa - Saka batura a cikin mai kunnawa Bayan an sake kafa sadarwa, ana kashe ƙararrawa ta atomatik.
STT-869 masu kunnawa ƙararrawa
Kuskure #1 - Kuskuren daidaitawa 1 - Matsar da dunƙule zuwa wurin hawa ya ɗauki lokaci mai yawa	– Ƙarfin firikwensin sauyawa ya lalace	– sake calibrate actuator ta hanyar riƙe maɓallin sadarwa har sai haske na uku na kore – Kira ma'aikatan sabis
		– Bincika idan an shigar da mai sarrafawa yadda ya kamata
Kuskure #2 - Kuskuren daidaitawa 2 - An fitar da dunƙule mafi girma. Babu juriya yayin ja daga	– Ba a dunƙule na’urar kunnawa zuwa bawul ko kuma ba a murɗa shi gaba ɗaya ba - bugun bugun bawul ya yi girma sosai ko kuma girman bawul ɗin ba na al'ada ba ne – An lalace firikwensin halin yanzu na actuator	– Sauya batura – sake calibrate actuator ta hanyar riƙe maɓallin sadarwa har sai haske na uku na kore
		– Kira ma'aikatan sabis

Kuskure #3 - Kuskuren daidaitawa 3 - Ba a fitar da dunƙule sosai ba - dunƙule ya gamu da juriya da wuri	- Ƙwararren bawul ɗin ya yi ƙanƙara ko kuma girman bawul ɗin ba na al'ada ba ne - Firikwensin yanzu ya lalace - Ƙananan matakin baturi	– Sauya batura – Kira ma'aikatan sabis
Kuskure #4 - Babu martani	– An kashe babban mai sarrafa - Mara kyau kewayon ko babu kewayo a cikin babban mai sarrafa – Modulin rediyo a cikin mai kunnawa ya lalace	– Bincika idan babban mai sarrafa yana kunne – Rage nisa daga mai sarrafa – Kira ma'aikatan sabis
Kuskure #5 - Ƙananan matakin baturi	Baturin lebur ne	Sauya batura
Kuskure #6 - An kulle Encoder	Mai rikodin ya lalace	– sake calibrate actuator ta hanyar riƙe maɓallin sadarwa har sai haske na uku na kore – Kira ma'aikatan sabis
Kuskure #7 - Zuwa babban voltage	– Rashin daidaituwa na dunƙule, zaren da sauransu na iya haifar da juriya mai yawa – Yawan juriya na kaya ko injina – Firikwensin na yanzu ya lalace
Kuskure #8 - Iyakance kuskuren firikwensin firikwensin	Ƙayyadadden firikwensin sauyawa ya lalace

Sanarwar EU na dacewa
Ta haka, muna ayyana ƙarƙashin alhakinmu kaɗai cewa EU-WiFi 8s wanda TECH STEROWNIKI II Sp. z oo, wanda ke da hedkwata a Wieprz Biała Droga 31, 34-122 Wieprz, ya bi umarnin 2014/53/EU na Majalisar Turai da na Majalisar 16 Afrilu 2014 kan daidaita dokokin Membobin ƙasa da suka shafi samar da kayan aiki da kayan aikin rediyo / EC. (EU OJ L 1999 na 5, p.153), Directive 22.05.2014/62/EC na 2009 Oktoba 125 kafa tsarin don saitin ecodesign bukatun don makamashi da suka shafi kayayyakin (EU OJ L 21 kamar yadda aka gyara) da kuma ENTUREMINRY FASAHA na 2009 Yuni 2009.285.10 gyara ƙa'idar game da mahimman buƙatun dangane da ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki, aiwatar da tanadi na Umarni (EU) 24/2019 na Majalisar Tarayyar Turai da na Majalisar 2017 Nuwamba 2102 na 15 Nuwamba 2017 gyara kan umarnin amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki (OJ L 2011, 65, shafi 305). Don kimanta yarda, an yi amfani da ma'auni masu jituwa:

• PN-EN IEC 60730-2-9: 2019-06 art. 3.1a Amintaccen amfani
• PN-EN IEC 62368-1: 2020-11 art. 3.1 a Amintaccen amfani
• PN-EN 62479: 2011 art. 3.1 a Amintaccen amfani
• TS EN 301 489-1 V2.2.3 (2019-11) art.3.1b Daidaitawa na lantarki
• TS EN 301 489-3 V2.1.1 (2019-03) art.3.1 b Daidaitawar lantarki
• TS EN 301 489-17 V3.2.4 (2020-09) art.3.1b Daidaitawa na lantarki
• ETSI EN 300 328 V2.2.2 (2019-07) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
• ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
• ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
• EN IEC 63000: 2018 RoHS

Babban hedkwatar:
ul. Biata Droga 31, 34-122 Wieprz

Sabis:
ul. Skotnica 120, 32-652 Bulowice
waya: +48 33 875 93 80
e-mail: serwis@techsterowniki.pl
www.tech-controller

FAQ

Tambaya: Zan iya haɗa famfo kai tsaye zuwa abubuwan sarrafa famfo?
A: Ba a ba da shawarar haɗa famfo kai tsaye zuwa abubuwan sarrafa famfo ba. Yi amfani da ƙarin da'irar aminci kamar adaftar famfo ZP-01 wanda masana'anta suka ba da shawarar.

Tambaya: Menene zan yi idan akwai canje-canje a cikin kayan da aka kwatanta a cikin littafin?
A: Idan akwai canje-canjen da aka gabatar bayan kwanan watan kammala littafin, koma zuwa jagororin masana'anta don kowane sabuntawa ko gyare-gyare.

Takardu / Albarkatu

FASAHA MASU MULKI EU-WiFi 8s Mai Kula da Dakin Intanet [pdf] Manual mai amfani STT-868, STT-869, EU-WiFi 8s Mai Kula da Dakin Intanet, EU-WiFi 8s, Mai Kula da Dakin Intanet, Mai sarrafa ɗaki, Mai tsarawa

Magana

• Manual mai amfani