TECH CONTROLERS EU-L-4X WiFi Wireless Wireless Controller Manual

Ƙayyadaddun bayanai
- Samfura: EU-L-4X WiFi
- Module na Intanet: Gina-ciki
- Website: www.tech-controllers.com.
- Tushen wutan lantarki: Lantarki
- Nasihar Adaftar Ruwa: ZP-01 (an sayar daban)

Umarnin Amfani da samfur

Tsaro
- Kafin shigarwa ko aiki tare da EU-L-4X WiFi mai kula, tabbatar da cewa ka cire haɗin wutar lantarki don guje wa girgiza wutar lantarki. Ana ba da shawarar samun mutumin da ya cancanta ya rike shigarwa don hana kowane lalacewa ga mai sarrafawa.

Bayanin Tsarin
- Mai sarrafawa yana fasalta ginanniyar tsarin Intanet wanda ke ba da damar sarrafa tsarin nesa ta hanyar website ko aikace-aikacen module. Ana samun sabuntawa akan na'urori masu jituwa akai-akai akan na ƙera website.

Shigar da Mai Gudanarwa
- Tabbatar cewa an katse wutar lantarki kafin shigarwa don hana girgiza wutar lantarki.
- Yi amfani da zanen da aka bayar don haɗawa da sadarwa tare da wasu kayan aiki.
- Idan ana haɗa famfo, bi buƙatun masana'antun famfo kuma la'akari da amfani da shawarar adaftar famfo na ZP-01 don aminci.

Farko Farko
- Daidaita lokacin yanzu ta amfani da web module don ingantaccen tsarin aiki. Tabbatar cewa an haɗa duk na'urorin da kyau kuma an yi rajista don amfani.

Babban Bayanin allo
- Babban allon mai sarrafawa ya haɗa da maɓalli don kewayawa da gyare-gyaren siga. Bi umarnin kan allo don bincika menus, daidaita saituna, da canzawa tsakanin yankuna.

Sampda Screens - ZONES
- Koma zuwa bayanan da aka nuna akan allon don cikakkun bayanai akan ranar mako, zafin waje, yanayin famfo, da wuraren dumama/ sanyaya.

FAQs

Tambaya: Zan iya shigar da EU-L-4X WiFi mai kula da kaina?
- A: Ana ba da shawarar samun mutumin da ya cancanta ya rike shigarwa saboda hadarin girgiza wutar lantarki idan ba a yi daidai ba.

Tambaya: Shin ina buƙatar siyan adaftar famfo na ZP-01 daban?
- A: Ee, ana ba da shawarar yin amfani da adaftar famfo na ZP-01 don tabbatar da haɗin kai mai aminci tsakanin mai sarrafawa da famfo.

TSIRA

Kafin aiki da na'urar, da fatan za a karanta waɗannan umarni a hankali. Rashin kiyaye umarnin na iya haifar da rauni na sirri da lalata na'urar. Da fatan za a adana wannan littafin don tunani na gaba. Don guje wa kurakurai da hatsarori da ba dole ba, tabbatar da cewa duk mutanen da ke aiki da na'urar sun fahimci aikin na'urar sosai da ayyukanta na aminci. Don Allah kar a jefar da littafin kuma da fatan za a tabbatar ya kasance tare da na'urar lokacin da aka canja wurin ta. Dangane da batun amincin rayuwar ɗan adam, lafiya, da dukiyoyi, da fatan za a kiyaye matakan kiyayewa da aka jera a cikin littafin aiki - saboda masana'anta ba za su ɗauki alhakin duk wani lahani da sakaci ya haifar ba.

GARGADI

Kayan aikin lantarki na rayuwa. Kafin aiwatar da duk wani aiki da ke da alaƙa da wutar lantarki (haɗin igiyoyi, shigar da na'urar, da sauransu), tabbatar cewa na'urar ba ta haɗa da manyan hanyoyin sadarwa ba!

Shigarwa ya kamata a gudanar da wani mutum rike da dacewa lantarki cancantar!
Kafin fara mai sarrafawa, ya kamata a auna juriya na ƙasa na injin lantarki da juriya na keɓaɓɓen wayoyi na lantarki.

Ba a yi nufin na'urar don amfani da yara ba!

HANKALI

Fitowar yanayi na iya lalata mai sarrafawa, don haka yayin tsawa, kashe shi ta hanyar cire filogi na mains.
Ba za a iya amfani da mai sarrafawa sabanin manufar da aka nufa ba.

Kafin da lokacin lokacin dumama, duba yanayin fasaha na igiyoyi, kuma duba shigar da mai sarrafawa da share duk ƙura da sauran ƙasa.

Ana iya samun canje-canjen da aka gabatar a cikin samfuran da aka jera a cikin jagorar yanzu bayan bita na ƙarshe na 02.02.2024. Mai sana'anta yana da haƙƙin gabatar da canje-canje a ƙira ko sabani daga ingantattun launuka. Misalai na iya ƙunsar kayan aikin zaɓi. Fasahar bugawa na iya haifar da bambance-bambance a cikin launukan da aka gabatar. Kula da yanayin yanayi yana da mahimmanci a gare mu. Sanin cewa muna kera na'urorin lantarki yana da alaƙa da alhakinmu na zubar da kayan lantarki da na'urorin da aka yi amfani da su ta hanyar da ba ta da lafiya ga muhalli. Don haka, kamfanin ya nema kuma ya karɓi lambar rajista wanda Babban Sufeto na Kare Muhalli na Poland ya bayar. Alamar kwandon keken hannu akan samfurin yana nuna cewa ba dole ba ne a zubar da samfurin tare da sharar gari. Ta hanyar ware sharar gida don sake amfani da su, muna taimakawa kare muhalli. Ya rage nauyin mai amfani don mika kayan da aka yi amfani da su zuwa wurin da aka keɓe don sake sarrafa sharar kayan lantarki da lantarki.

BAYANI AKAN tsarin

An tsara mai kula da WiFi na EU-L-4X don sarrafa na'urar dumama kuma yana tallafawa yankuna 8 ( radiators 4 da 4 bene dumama). Hakanan yana goyan bayan sadarwar RS-485 (TECH SBUS) mara waya da waya. Saboda ƙarin tsarin EU-ML-4X, WiFi yana ba da damar fadada shigarwa ta ƙarin yankuna 4 na bene. Babban aikinsa shine kula da yanayin zafin da aka saita a kowane yanki. EU-L-4X WiFi na'ura ce wacce, tare da duk na'urori na gefe (na'urori masu auna firikwensin daki, masu kula da daki, firikwensin bene, firikwensin waje, firikwensin taga, masu kunna wutar lantarki), suna samar da tsarin gaba ɗaya.

Saboda faffadan software ɗin sa, EU-L-4X WiFi mai sarrafa na iya:

goyan baya har zuwa 8 sadaukar da wayoyi EU-R-12b, EU-R-12s, EU-F-12b, EU-RX masu kula da
goyan bayan na'urori masu auna firikwensin EU-C-4p har zuwa 7 (yankuna: 1-4)

tallafawa har zuwa 8 da yawa daban-daban masu kula da mara waya, misali EU-R-8X, EU-R-8b, EU-R-8b Plus, EU-R-8s Plus, EU-F-8z da firikwensin: EU-C-8r, EU-C-mini, EU-CL-mini
goyi bayan EU-C-8f bene na'urori masu auna zafin jiki
goyi bayan firikwensin waje na EU-C-8zr da sarrafa yanayi
goyan bayan firikwensin taga EU-C-2n mara waya (har zuwa inji mai kwakwalwa 6 a kowane yanki)
ba da damar sarrafa STT-868, STT-869 ko EU-GX mara igiyar waya (pcs 6 kowane yanki)
ba da damar aiki na thermoelectric actuators
ba da izinin aiki na bawul ɗin haɗawa - bayan haɗa EU-i-1, EU-i-1m bawul module
sarrafa na'urar dumama ko sanyaya yin amfani da voltage-free lamba
ba da damar fitarwa 230V ɗaya zuwa famfo
ba da damar saita jadawalin aiki ɗaya don kowane yanki
ba da damar sabunta software ta hanyar tashar USB

Ana ba da sabuntawar jerin na'urori don faɗaɗa tsarin akan ci gaba akan mu website www.tech-controllers.com. Mai sarrafawa yana da ginanniyar tsarin Intanet, wanda ke ba mai amfani damar sarrafa tsarin nesa da nesa ta hanyar https://emodul.eu website ko ta hanyar aikace-aikacen emodul.

SANAR DA MAI GIRMA

Ya kamata a shigar da mai kula da EU-L-4X WiFi ta mutumin da ya cancanta kawai!

GARGADI

Haɗarin rauni ko mutuwa sakamakon girgiza wutar lantarki akan haɗin kai. Kafin aiki a kan mai sarrafawa, cire haɗin wutar lantarki kuma ka kiyaye shi daga kunnawa na bazata!
Wayoyin da ba daidai ba na iya lalata mai sarrafawa.
Hoton hoto mai bayanin yadda ake haɗawa da sadarwa tare da sauran kayan aiki:

Shigar da capacitor electrolytic

Don rage yawan abubuwan da ake karantawa na zafin zafin jiki daga firikwensin yankin, yakamata a shigar da ƙaramin ƙarfin ƙarfin lantarki na 220uF/25V, wanda aka haɗa a layi daya da kebul na firikwensin.
Lokacin shigar da capacitor, koyaushe kula da polarity ta musamman.
Ƙasar abubuwan da aka yiwa alama da farar tsiri ana kiyaye ta zuwa dama ta mai haɗin firikwensin, kamar yadda aka gani daga gaban mai sarrafawa kuma aka nuna a cikin hotunan da aka makala.
Tashar ta biyu ta capacitor tana haɗe zuwa tasha na mai haɗin hagu. Mun gano cewa wannan maganin yana kawar da duk wani ɓarna mai yuwuwa.
Duk da haka, yana da mahimmanci a lura cewa ƙa'idar asali ita ce shigar da wayoyi daidai don kauce wa tsangwama.
Bai kamata a kora wayoyi kusa da tushen filin lantarki ba. Idan irin wannan yanayin ya kasance, dole ne a saka tace a cikin nau'i na capacitor a cikin tsarin.

GARGADI

Idan mai yin famfo yana buƙatar babban canji na waje, fis ɗin samar da wutar lantarki ko ƙarin sauran na'urar da aka zaɓa don karkatattun igiyoyin ruwa ana ba da shawarar kada su haɗa famfo kai tsaye zuwa abubuwan sarrafa famfo.

Don guje wa lalacewa ga na'urar, dole ne a yi amfani da ƙarin da'irar aminci tsakanin mai sarrafawa da famfo. Mai sana'anta yana ba da shawarar adaftar famfo na ZP-01, wanda dole ne a siya daban.

Haɗin kai tsakanin mai sarrafawa da masu kula da ɗakin

Lokacin haɗa masu kula da ɗakin zuwa mai sarrafawa, ana sanya mai sarrafawa na ƙarshe a cikin matsayi na ƙarshe ta hanyar sauya mai tsalle zuwa matsayin ON.

FARKO NA FARKO

Domin mai sarrafawa ya yi aiki daidai, dole ne a bi matakai masu zuwa don farawa na farko:

Mataki 1: Haɗa masu haɗin haɗin haɗin WiFi na EU-L-4X tare da duk na'urorin da ya kamata a sarrafa Don haɗa wayoyi, cire murfin mai sarrafawa sannan ka haɗa haɗin waya - wannan ya kamata a yi kamar yadda aka bayyana akan masu haɗawa da zane-zane a cikin jagorar.
Mataki na 2. Canja wutar lantarki da duba aikin na'urorin da aka haɗa Bayan haɗa dukkan na'urori, kunna wutar lantarki na mai sarrafawa. Yin amfani da aikin yanayin Manual (Menu → Menu → Fitter's Menu → Yanayin Manual), duba aikin ɗayan na'urori. Amfani da kuma maɓallai, zaɓi na'urar kuma danna maɓallin MENU - na'urar da za'a bincika yakamata ta kunna. Duba duk na'urorin da aka haɗa ta wannan hanya.
Mataki na 3. Saita lokaci da kwanan wata Don saita kwanan wata da lokaci na yanzu, zaɓi Menu → Saitunan sarrafawa → Saitunan lokaci.
- HANKALI Amfani da web module, za a iya daidaita lokacin yanzu daga cibiyar sadarwa ta atomatik.
Mataki na 4. Haɓaka na'urori masu auna zafin jiki, masu kula da ɗaki Domin EU-L-4X WiFi mai kula da yankin da aka ba shi, dole ne ya karɓi bayani game da zafin jiki na yanzu. Hanya mafi sauƙi ita ce a yi amfani da firikwensin zafin jiki mai waya ko mara waya (misali EU-C-7p, EU-C-mini, EU-CL-mini, EU-C-8r). Koyaya, idan mai aiki yana son samun damar canza ƙimar zafin jiki da aka saita kai tsaye daga yankin, mai aiki zai iya amfani da masu kula da ɗaki na gabaɗaya, misali EU-R-8b, EU-R-8z, EU-R-8b Plus ko masu kula da kwazo. : EU-R-12b, EU-R-12s da sauransu Don haɗa firikwensin tare da mai sarrafawa, zaɓi kan mai sarrafawa: Menu → Menu na Fitter → Yankuna → Yanki… mai sarrafawa.
Mataki na 5. Haɓaka sauran na'urorin haɗin gwiwar EU-L-4X WiFi mai sarrafa kuma na iya aiki tare da na'urori masu zuwa:
- EU-i-1, EU-i-1m hadawa bawul kayayyaki
- ƙarin lambobin sadarwa, misali EU-MW-1 (pcs 6 kowane mai sarrafawa)
- Bayan kunna na'ura mai kwakwalwa ta Intanet, masu amfani suna da zaɓi don sarrafa shigarwa ta Intanet ta hanyar Intanet module.EU aikace-aikace. Da fatan za a koma zuwa littafin jagorar tsarin don cikakkun bayanai.
- HANKALI Idan masu amfani suna son yin amfani da na'urorin da ke sama a cikin tsarin su, dole ne a haɗa su da/ko su yi rajista.

BAYANIN BAYANIN ALAMOMIN

Ana gudanar da sarrafawa ta amfani da maɓallan da ke kusa da nuni.

Nuni mai sarrafawa.
button - ana amfani da shi don bincika ayyukan menu ko ƙara ƙimar sigogin da aka gyara. Wannan maballin kuma yana canza sigogin aiki tsakanin yankuna.
button - ana amfani da shi don bincika ayyukan menu ko rage ƙimar sigogin da aka gyara. Wannan maballin kuma yana canza sigogin aiki tsakanin yankuna.
Maɓallin MENU - ya shiga menu na mai sarrafawa, ya tabbatar da saituna.

Maɓallin FITA - yana fita menu na mai sarrafawa ko soke saitunan ko kunna allon view (zone, zone).

Sample allo - ZONES

Ranar mako na yanzu
Zazzabi na waje
Pump ON
Mai yuwuwar lambar sadarwa mara amfani
Lokaci na yanzu
Ayyukan wucewa mai aiki a yankin - duba sashe na VI. 4.14. Ruwan zafi
Bayani game da yanayin aiki/jadawalin aiki a yankin da ake bi
Ƙarfin sigina da matsayin baturi na bayanin firikwensin ɗakin

Saita zafin jiki a cikin yankin da aka bayar
Yanayin zafin ƙasa na yanzu
Zazzabi na yanzu a cikin yankin da aka bayar
Bayanin yanki. Lambobin da ake gani na nufin akwai na'urar firikwensin ɗaki mai haɗe wanda ke ba da bayani game da zafin jiki na yanzu a yankin. Idan yankin a halin yanzu yana dumama ko sanyaya, ya danganta da yanayin, lambar tana walƙiya. Idan ƙararrawa ta faru a yankin da aka bayar, za a nuna alamar motsi maimakon lambobi. Zuwa view sigogin aiki na yanzu na takamaiman yanki, haskaka lambar ta ta amfani da maɓalli.

Sampda Allon - ZONE

Zazzabi na waje
Halin baturi
Lokaci na yanzu
Yanayin aiki na yanzu na yankin da aka nuna
Yanayin zafin da aka saita na yankin da aka bayar
Zazzabi na yanzu na yankin da aka bayar
Yanayin zafin ƙasa na yanzu
Matsakaicin zafin ƙasa
Bayani akan adadin na'urori masu auna firikwensin taga mai rijista a yankin
Bayani game da adadin masu yin rajista a yankin

Alamar yankin da aka nuna a halin yanzu
Matsayin zafi na yanzu a cikin yankin da aka bayar
Sunan yanki

AYYUKAN MULKI

YANAYIN AIKI
- Wannan aikin yana ba da damar kunna yanayin aiki da aka zaɓa.
  - Yanayin al'ada - yanayin zafin da aka saita ya dogara da jadawalin da aka saita
  - Yanayin hutu - saitin zafin jiki ya dogara da saitunan wannan yanayin
    - Menu → Menu na Fitter → Yankuna → Yanki… → Saituna → Saitunan Zazzabi > Yanayin Holiday
  - Yanayin tattalin arziki - saitin zafin jiki ya dogara da saitunan wannan yanayin
    - Menu → Menu na Fitter → Yankuna → Yanki… → Saituna → Saitunan Zazzabi > Yanayin Tattalin Arziki
  - Yanayin ta'aziyya - saitin zafin jiki ya dogara da saitunan wannan yanayin
    - Menu → Menu na Fitter → Yankuna → Yanki… → Saituna → Saitunan zafin jiki> Yanayin ta'aziyya
  - HANKALI
    - Canza yanayin zuwa hutu, tattalin arziki ko jin daɗi ya shafi duk yankuna. A irin waɗannan hanyoyin, masu amfani za su iya canza yanayin yanayin da aka zaɓa kawai don wani yanki na musamman.
    - A cikin yanayin aiki ban da na al'ada, masu amfani ba za su iya canza yanayin zafin da aka saita a matakin mai sarrafa ɗaki ba.

YANKI
- ON
  - Don nuna yankin yana aiki akan allon, yi rijistar firikwensin ciki (duba: Menu na Fitter).
  - Ayyukan yana ba ku damar kashe yankin kuma ku ɓoye sigogi daga babban allo.
- Saita zafin jiki
  - Saitin zafin jiki a cikin yankin yana haifar da saitunan takamaiman yanayin aiki a yankin, watau jadawalin mako-mako. Koyaya, yana yiwuwa a ketare jadawalin kuma saita keɓantaccen zafin jiki da tsawon lokacin zafi.
  - Bayan wannan lokacin, saita zafin jiki a yankin zai dogara da yanayin da aka saita a baya. A kan ci gaba, saitin ƙimar zafin jiki da lokacin har zuwa ƙarshen ingancinsa ana nuna su akan babban allo.
  - HANKALI Idan an saita tsawon takamaiman yanayin zafin saiti zuwa CON, wannan zafin jiki zai yi aiki na wani lokaci mara iyaka (zazzabi na dindindin).
- Yanayin aiki
  - Masu amfani iya view kuma canza saitunan yanayin aiki don yankin.
    - Jadawalin Gida - don tsara saitunan da suka shafi yanki ɗaya kawai
    - Jadawalin Duniya 1-5 - don tsara saitunan da suka shafi duk yankuna, inda suke aiki
    - Yawan zafin jiki na yau da kullun (CON) - don saita saiti daban-daban na ƙimar zafin jiki waɗanda za su yi aiki a cikin yankin da aka bayar har abada, ba tare da la'akari da lokacin rana ba
    - Iyakar lokaci - don saita keɓan yanayin zafi wanda zai kasance mai aiki kawai na takamaiman lokaci. Bayan wannan lokacin, zafin jiki zai haifar da yanayin da aka yi amfani da shi a baya (jadawali ko akai-akai ba tare da iyakacin lokaci ba).

Jadawalin gyarawa

Menu → Yankuna → Yanki… → Yanayin Aiki → Jadawalin… → Gyara

Kwanakin da saitunan da ke sama ke aiki
An saita yanayin zafi a waje da tazarar lokaci
Saita yanayin zafi don tazarar lokaci
Tsakanin lokaci

Don saita jadawalin:

Yi amfani da kibiyoyi don zaɓar ɓangaren mako wanda jadawalin da aka tsara zai yi aiki (bangaren 1 na mako ko kashi na 2 na mako).
Yi amfani da maɓallin MENU don zuwa saitin saitunan zafin jiki wanda zai yi aiki a waje da tazarar lokaci - saita shi tare da kibau, tabbatar da amfani da maɓallin MENU.
Yi amfani da maɓallin MENU don zuwa saitunan tazarar lokaci da saita zafin jiki wanda zai shafi takamaiman tazarar lokaci, saita shi ta amfani da kibau, tabbatar da maɓallin MENU.

Ci gaba zuwa gyare-gyaren kwanakin da aka sanya zuwa kashi na 1 ko na biyu na mako (an nuna kwanakin aiki da fari). Ana tabbatar da saitunan tare da maɓallin MENU, kiban suna kewaya tsakanin kowace rana Bayan saita jadawalin duk kwanakin mako, danna maɓallin FITA kuma zaɓi Zaɓin Tabbatarwa tare da maɓallin MENU.
- HANKALI Masu amfani za su iya saita tazarar lokaci daban-daban guda uku a cikin jadawalin da aka bayar (tare da daidaiton mintuna 15).

SAIRIN SARAUTA

Saitunan lokaci - Za a iya sauke lokaci da kwanan wata ta atomatik daga cibiyar sadarwar idan an haɗa tsarin Intanet kuma yanayin atomatik ya kunna. Hakanan yana yiwuwa ga masu amfani su saita lokaci da kwanan wata da hannu idan yanayin atomatik baya aiki daidai.

Saitunan allo - Wannan aikin yana bawa masu amfani damar tsara nuni.
Sauti da maballin - An zaɓi wannan zaɓi don kunna / kashe sautin da zai raka latsa maɓallan.

Farashin FITTER

Menu na fitter shine mafi hadaddun menu na mai sarrafawa kuma yana bawa masu amfani damar samun dama ga zaɓin ayyuka da yawa waɗanda ke ba da damar iyakar amfani da damar mai sarrafawa.

YANKI

Don kunna yanki akan nunin mai sarrafawa, yi rijista/ kunna firikwensin ciki sannan kunna yankin.

SENSOR

Masu amfani za su iya yin rajista / kunna kowane nau'in firikwensin: Wayar NTC, RS ko mara waya.
Hysteresis - yana ƙara juriya ga zafin jiki na ɗaki a cikin kewayon 0.1 ÷ 5 ° C, wanda aka kunna ƙarin dumama / sanyaya.

Exampda:
Yanayin zafin jiki na dakin da aka saita shine 23 ° C
Hysteresis shine 1 ° C
Na'urar firikwensin dakin zai fara nuna zafi a dakin bayan zafin jiki ya ragu zuwa 22 ° C.
Daidaitawa - Ana yin gyare-gyaren firikwensin ɗaki yayin haɗuwa ko bayan tsawon lokacin amfani da firikwensin idan zafin dakin da aka nuna ya saba da na ainihi. Yanayin daidaitawa: daga -10 ° C zuwa + 10 ° C, tare da mataki na 0.1 ° C.

SATA ZAFIN

An bayyana aikin a cikin Menu → Yanki yanki.

YANAYIN AIKI

An bayyana aikin a cikin Menu → Yanki yanki.

TSARIN FITARWA

Wannan zaɓin yana sarrafa abubuwan da ake fitarwa: famfo mai dumama ƙasa, mai yuwuwar lamba mara amfani da abubuwan firikwensin 1-4 (NTC don sarrafa zafin jiki a cikin yanki ko firikwensin bene don sarrafa zafin ƙasa). Fitowar firikwensin 1-4 an sanya shi zuwa yankuna 1-4, bi da bi.
Nau'in firikwensin da aka zaɓa a nan zai bayyana ta tsohuwa a cikin zaɓi: Menu → Menu na Fitter → Yankuna → Yankuna… → Fitar daki → Zaɓin Sensor (don firikwensin zafin jiki) da Menu → Menu na Fitter → Yankuna → Yankuna… → Zaɓin firikwensin (don firikwensin ƙasa).

Ana amfani da abubuwan firikwensin biyu don yin rajistar yankin ta waya.
Hakanan aikin yana ba da damar kashe famfo da lambar sadarwa a wani yanki da aka bayar. Irin wannan yanki, duk da buƙatar dumama, ba zai shiga cikin sarrafawa ba lokacin da aka kashe.

STINGS

Kula da yanayi - zaɓi don kunna / kashe ikon sarrafa yanayi.

HANKALI Ayyukan sarrafa yanayi kawai idan a cikin Menu → Menu → Fitter's menu → firikwensin waje, an duba zaɓin sarrafa yanayi.
Dumama - wannan aikin yana ba da damar / yana kashe aikin dumama, kuma yana ba da damar zaɓin jadawalin da zai kasance mai inganci don yankin yayin dumama, da kuma zaɓar keɓaɓɓen zafin jiki na dindindin.
Sanyi - wannan aikin yana ba da damar / yana kashe aikin sanyaya kuma yana ba da damar zaɓin jadawalin da zai kasance mai inganci a yankin yayin sanyaya, da kuma zaɓin keɓantaccen zafin jiki.

Saitunan zafin jiki - Ana amfani da wannan aikin don saita yanayin zafi don yanayin aiki guda uku (Yanayin Hutu, Yanayin Tattalin Arziki, da Yanayin Ta'aziyya).
Mafi kyawun farawa- Mafi kyawun farawa shine tsarin sarrafa dumama mai hankali. Yana aiki ta hanyar ci gaba da saka idanu akan tsarin dumama kuma yana amfani da wannan bayanin don kunna dumama ta atomatik kafin lokacin da ake buƙata don isa yanayin yanayin da aka saita. Wannan tsarin baya buƙatar wani hannu a ɓangaren mai amfani kuma yana amsa daidai ga duk wani canje-canjen da ke shafar ingantaccen tsarin dumama. Idan, don example, akwai canje-canjen da aka yi don shigarwa kuma gidan ya yi zafi da sauri, tsarin farawa mafi kyau zai gano canji a canjin zafin jiki na gaba wanda aka tsara sakamakon jadawalin, kuma a cikin sake zagayowar zai jinkirta kunna dumama har sai lokacin ƙarshe, rage lokacin da ake buƙata don isa yanayin zafin da aka saita.
A- lokacin da aka tsara na canza yanayin tattalin arziki zuwa yanayi mai dadi
- Kunna wannan aikin zai tabbatar da cewa lokacin da aka tsara canjin yanayin zafin da aka saita sakamakon jadawalin ya faru, yanayin zafin da ke cikin ɗakin zai kasance kusa da ƙimar da ake so.
- HANKALI Mafi kyawun aikin farawa yana aiki ne kawai a yanayin dumama.

ACTUATORS

Saituna
- SIGMA - aikin yana ba da damar sarrafawa mara kyau na mai kunna wutar lantarki. Lokacin kunna wannan aikin, masu amfani zasu iya saita mafi ƙanƙanta da matsakaicin buɗewa na bawul - wannan yana nufin cewa matakin buɗewa da rufewa na bawul ɗin ba zai taɓa wuce waɗannan ƙimar ba. Bugu da ƙari, masu amfani za su iya daidaita ma'aunin Range, wanda ke ƙayyade a wane zafin dakin da bawul ɗin zai fara rufewa da buɗewa.
- HANKALI Ayyukan Sigma yana samuwa kawai don STT-868 ko STT-869 masu kunnawa.

Exampda:

Yanayin saiti na yanki: 23 C
Mafi ƙarancin buɗewa: 30%
Matsakaicin buɗewa: 90%
Kewaye: 5 C
Ciwon ciki: 2 C
Tare da saitunan da ke sama, mai kunnawa zai fara rufewa da zarar yanayin zafi a yankin ya kai 18 ° C (zazzabi da aka saita ya rage ƙimar kewayon). Mafi ƙarancin buɗewa zai faru lokacin da zafin yanki ya kai wurin da aka saita.

Da zarar an kai wurin da aka saita, zazzabi a yankin zai fara raguwa. Lokacin da ya kai 21 ° C (saitin zafin jiki ya rage darajar hysteresis), mai kunnawa zai fara buɗewa - ya kai matsakaicin buɗewa lokacin da zafin jiki a yankin ya kai 18 ° C.
- Kariya - Lokacin da aka zaɓi wannan aikin, mai sarrafawa yana duba zafin jiki. Idan saitin zafin jiki ya wuce adadin digiri a cikin ma'aunin Range, to duk masu kunnawa a cikin yankin da aka bayar za a rufe su (0%). Wannan aikin yana aiki ne kawai tare da kunna aikin SIGMA.
- Yanayin Gaggawa - Ayyukan yana ba masu amfani damar saita masu kunnawa don buɗewa lokacin da ƙararrawa ta faru a cikin yankin da aka ba (rashin hasashe, kuskuren sadarwa).
- Masu aiki 1-6 - zaɓi yana bawa masu amfani damar yin rijistar mai kunnawa mara waya. Don yin wannan, zaɓi Rajista kuma danna maɓallin sadarwa a taƙaice akan mai kunnawa. Bayan nasarar yin rajista, ƙarin aikin Bayani yana bayyana, inda masu amfani zasu iya view sigogin actuator, misali matsayin baturi, kewayon, da sauransu. Lokacin zabar wannan zaɓi, yana yiwuwa kuma a share ɗaya ko duk masu kunnawa a lokaci guda.

SENSORS TA GINI

Saituna

ON - aikin yana ba da damar kunna na'urori masu auna firikwensin taga a cikin yankin da aka bayar (ana buƙatar rajistar firikwensin taga).
Lokacin jinkiri - Wannan aikin yana bawa masu amfani damar saita lokacin jinkiri. Bayan lokacin jinkirin da aka saita, babban mai kula yana amsa buɗe taga kuma yana toshe dumama ko sanyaya a cikin yankin.

Exampda: An saita lokacin jinkiri zuwa mintuna 10. Da zarar an buɗe taga, firikwensin ya aika bayanai zuwa ga babban mai kula game da buɗe taga. Na'urar firikwensin yana tabbatar da halin yanzu na taga lokaci zuwa lokaci. Idan bayan lokacin jinkiri (minti 10) taga yana buɗewa, babban mai kula zai rufe masu kunna bawul kuma ya kashe zafi mai zafi na yankin.

HANKALI Idan an saita lokacin jinkiri zuwa 0, to za a watsa siginar zuwa mai kunnawa don rufewa nan take.

Mara waya - zaɓi don yin rijistar firikwensin taga (pcs 1-6 a kowane yanki). Don yin wannan, zaɓi Rijista kuma a taƙaice danna maɓallin sadarwa akan firikwensin. Bayan nasarar yin rajista, ƙarin aikin Bayani yana bayyana, inda masu amfani zasu iya view sigogin firikwensin, misali matsayin baturi, kewayo, da sauransu. Hakanan yana yiwuwa a share firikwensin da aka bayar ko duka a lokaci guda.

RUWAN BANA

Sensor na bene

Zaɓin Sensor - Ana amfani da wannan aikin don kunna (waya) ko rajista (mara waya) firikwensin bene. A cikin yanayin firikwensin mara waya, rajista yana faruwa ta bugu da žari danna maɓallin sadarwa akan firikwensin.
Hysteresis - yana ƙara juriya ga zafin jiki na ɗakin a cikin kewayon 0.1 ÷ 5 ° C, wanda aka kunna ƙarin dumama / sanyaya.

Exampda:

Matsakaicin zafin ƙasa shine 45 ° C
Hysteresis shine 2 ° C
Mai sarrafawa zai kashe lambar sadarwa bayan an wuce 45°C a firikwensin ƙasa. Idan zafin jiki ya fara faɗuwa, za a sake kunna lambar sadarwa bayan yanayin zafi a ƙasan firikwensin ya faɗi zuwa 43⁰C (sai dai in an kai ga saita yanayin zafin ɗakin).

Daidaitawa - Ana yin gyare-gyaren firikwensin bene yayin taro ko bayan tsawon lokacin amfani da firikwensin, idan yanayin zafin bene da aka nuna ya bambanta daga ainihin. Daidaita jeri daga -10°C zuwa +10°C, tare da mataki na 0.1°C.
HANKALI Ba a amfani da firikwensin bene yayin yanayin sanyaya.

Yanayin aiki

KASHE - Zaɓin wannan zaɓi yana hana yanayin dumama ƙasa, watau Kariyar bene ko Yanayin Ta'aziyya ba sa aiki

Kariyar bene - Ana amfani da wannan aikin don kiyaye zafin ƙasa a ƙasa da matsakaicin matsakaicin zafin jiki don kare tsarin daga zafi mai zafi. Lokacin da zafin jiki ya tashi zuwa matsakaicin matsakaicin zafin jiki, za a kashe sake dumama yankin.
Yanayin ta'aziyya - Ana amfani da wannan aikin don kula da yanayin zafin ƙasa mai daɗi, watau mai sarrafawa zai saka idanu akan zafin jiki na yanzu. Lokacin da zafin jiki ya tashi zuwa matsakaicin matsakaicin zafin jiki, za a kashe dumama yankin don kare tsarin daga zafi mai zafi. Lokacin da zafin ƙasa ya faɗi ƙasa da ƙaramin zafin da aka saita, za a sake kunna yankin sake zafi.

Min. zafin jiki

Ana amfani da aikin don saita ƙananan zafin jiki don kare ƙasa daga sanyi. Lokacin da zafin ƙasa ya faɗi ƙasa da ƙaramin zafin da aka saita, za a sake kunna yankin sake zafi. Wannan aikin yana samuwa ne kawai akan zaɓar Yanayin Ta'aziyya.

Max. zafin jiki

Matsakaicin zafin jiki na ƙasa shine madaidaicin zafin ƙasa wanda ke sama wanda mai sarrafawa zai kashe dumama ba tare da la'akari da yanayin zafin ɗakin na yanzu ba. Wannan aikin yana kare shigarwa daga zafi fiye da kima.

KARIN LABARI

Ayyukan yana ba masu amfani damar shigar da ƙarin lambobi. Da farko, wajibi ne don yin rajistar irin wannan lambar sadarwa (1-6 inji mai kwakwalwa). Don yin wannan, zaɓi zaɓin Rijista kuma a taƙaice danna maɓallin sadarwa akan na'urar, misali EU-MW-1.
Bayan yin rijista da kunna na'urar, ayyuka masu zuwa zasu bayyana:

Bayani - yana ba da bayani game da matsayi, yanayin aiki da kewayon tuntuɓar (annuna akan allon mai sarrafawa)

ON - yana ba da damar / yana hana aikin lamba
Yanayin aiki - yana ba da damar kunna zaɓin yanayin aiki na lamba
Yanayin lokaci - yana ba da damar saita lokacin aiki na lamba don takamaiman lokaci Masu amfani za su iya canza matsayin lamba ta zaɓi/ɓata zaɓin Active sannan saita Tsawon wannan yanayin.
Yanayin dindindin - yana ba da damar saita lamba don yin aiki na dindindin; yana yiwuwa a canza matsayin lamba ta zaɓi/ɓaɓar zaɓi mai aiki.

Relays - lambar sadarwa tana aiki bisa ga shiyyoyin da aka sanya ta
Dehumidification - idan Maɗaukakin Humidity ya wuce a cikin yanki, wannan zaɓin yana ba da damar farawa na dehumidifier na iska.
Saitunan jadawali - yana bawa masu amfani damar saita jadawalin aikin tuntuɓar daban (ko da kuwa matsayin yankunan masu sarrafawa).

HANKALI Aikin Dehumidification yana aiki ne kawai a cikin yanayin aikin sanyaya.
Share - amfani da su don share zaɓaɓɓen lamba

MIXING BAYANI

Mai kula da EU-L-4X WiFi na iya aiki da ƙarin bawul ta amfani da ƙirar bawul (misali EU-i-1m). Wannan bawul ɗin yana da sadarwar RS, amma ya zama dole don aiwatar da tsarin rajista, wanda zai buƙaci masu amfani su faɗi lambar ƙirar da ke bayan gidanta, ko a allon bayanan software). Bayan daidaitaccen rajista, ana iya saita sigogi ɗaya na bawul ɗin taimako.

Bayani - damar viewing da yanayin sigogi na bawul.
Yi rijista - Bayan shigar da lambar a bayan bawul ko a cikin Menu → Bayanin software, masu amfani zasu iya yin rijistar bawul tare da babban mai sarrafawa.
Yanayin manual - masu amfani za su iya dakatar da aikin bawul da hannu, buɗe / rufe bawul, da kunna famfo da kashewa don sarrafa daidaitaccen aikin na'urorin.
Siga – yana nuna lambar sigar software ta bawul. Wannan bayanin yana da mahimmanci lokacin tuntuɓar sabis ɗin.
Cire Valve - ana amfani da shi don share bayanan gaba ɗaya game da bawul ɗin da aka zaɓa da aikinsa daga tsarin. Ana amfani da aikin, don misaliample, lokacin cire bawul ko maye gurbin module (to ya zama dole don sake yin rajistar sabon tsarin).
ON - yana ba da damar / hana aikin bawul na ɗan lokaci
Saitin zafin wuta - don kafa bawul saita zafin jiki
Yanayin bazara - canzawa zuwa yanayin bazara yana rufe bawul don guje wa dumama gidan da ba dole ba. Idan zafin wutar lantarki ya yi yawa (ana buƙatar kariyar tukunyar jirgi), za a buɗe bawul ɗin a yanayin gaggawa. Wannan yanayin baya aiki a Yanayin Kariya na Komawa.
Daidaitawa - Ana iya amfani da wannan aikin don daidaita bawul ɗin da aka gina a ciki, misali bayan dogon amfani. Lokacin daidaitawa, an saita bawul ɗin zuwa wuri mai aminci, watau don CH bawul da Komawa nau'ikan kariyar - don cikakken buɗe wuri, kuma don bawul ɗin bene da nau'ikan sanyaya - zuwa wurin rufewa.
bugun jini guda daya - Wannan shine matsakaicin matsakaicin bugun jini guda ɗaya (buɗewa ko rufewa) wanda bawul ɗin zai iya yi yayin yanayin zafi ɗayaampling. Idan zafin jiki yana kusa da wurin da aka saita, ana ƙididdige wannan bugun jini bisa ma'aunin daidaituwar daidaito. A nan, ƙarami guda bugun jini, mafi daidaitaccen yanayin da aka saita za a iya kaiwa, amma saitin zafin jiki ya kai tsawon lokaci.
Mafi ƙarancin buɗewa - Ma'auni wanda ke ƙayyade mafi ƙanƙanta matakin buɗaɗɗen bawul a cikin kashi. Wannan siga yana bawa masu amfani damar barin bawul ɗin ɗan buɗewa don kula da ƙaramar kwarara.
- HANKALI Idan an saita ƙaramin buɗe bawul ɗin zuwa 0% (cikakken rufewa), famfo ba zai yi aiki ba lokacin da bawul ɗin ke rufe.
Lokacin buɗewa - Siga wanda ke ƙayyade lokacin da yake ɗaukar bawul actuator don buɗe bawul daga 0% zuwa 100%. Ya kamata a zaɓi wannan lokacin don dacewa da na mai kunna bawul (kamar yadda aka nuna akan farantin sunansa).
Dakatawar auna - Wannan siga yana ƙayyade mitar aunawa (sarrafawa) zafin ruwa a ƙasa na bawul ɗin shigarwa na CH. Idan firikwensin ya nuna canjin zafin jiki (bangare daga wurin da aka saita), to, bawul ɗin solenoid zai buɗe ko rufe ta ƙimar da aka saita don komawa zuwa zafin da aka saita.
Valve Hysteresis - Ana amfani da wannan zaɓin don saita yanayin yanayin zafin bawul. Wannan shine bambanci tsakanin zafin jiki da aka saita da zafin da bawul ɗin zai fara rufewa ko buɗewa.

Exampda:

Yanayin zafin saiti na Valve: 50°C
Ciwon ciki: 2°C
Tasha Valve: 50°C
Buɗewar Valve: 48°C
Rufe Valve: 52°C

Lokacin da aka saita zafin jiki shine 50 ° C kuma hysteresis ya kasance 2 ° C, bawul ɗin zai tsaya a wuri ɗaya lokacin da zafin jiki ya kai 50 ° C, lokacin da zafin jiki ya faɗi zuwa 48 ° C zai fara buɗewa kuma idan ya kai 52 °. C bawul ɗin zai fara rufewa don rage yawan zafin jiki.

Nau'in Valve - yana bawa masu amfani damar zaɓar nau'ikan bawul masu zuwa:
CH bawul - don sarrafa zafin jiki a cikin da'irar CH ta amfani da firikwensin bawul. Dole ne a sanya firikwensin bawul a ƙasa na bawul ɗin haɗawa akan bututun wadata.
Bawul ɗin bene - don sarrafa zafin jiki ta amfani da saitunan kewaye dumama karkashin bene. Nau'in bene yana kare tsarin bene daga matsanancin zafi. Idan an saita nau'in bawul ɗin azaman CH kuma an haɗa shi da tsarin ƙasa, yana iya haifar da lalacewar tsarin ƙasa.
Komawa kariya - don sarrafa zafin jiki a dawowar shigarwa ta hanyar amfani da firikwensin dawowa. Komawa kawai da na'urori masu auna wutar lantarki suna aiki a cikin irin wannan nau'in bawul, kuma ba a haɗa firikwensin bawul zuwa mai sarrafawa. A cikin wannan tsari, bawul ɗin yana kare dawowar tukunyar jirgi daga zafin sanyi a matsayin fifiko, kuma idan an zaɓi aikin kariya na Boiler, yana kuma kare tukunyar jirgi daga zazzaɓi. Idan an rufe bawul (0% a buɗe), ruwan yana gudana ne kawai a cikin gajeriyar kewayawa, yayin da cikakken buɗewar bawul (100%) yana nufin cewa an rufe gajeriyar kewayawa kuma ruwan yana gudana ta cikin dukkan tsarin dumama na tsakiya.
- HANKALI Idan Kariyar Boiler ta kashe, zafin jiki na CH ba zai shafi buɗe bawul ɗin ba. A cikin matsanancin yanayi, tukunyar jirgi na iya yin zafi sosai, don haka ana ba da shawarar saita saitunan kariyar tukunyar jirgi. Don irin wannan nau'in bawul, koma zuwa Allon Kariyar Komawa.
Sanyi - don sarrafa yawan zafin jiki na tsarin sanyaya (bawul yana buɗewa lokacin da zafin jiki ya kasance ƙasa da zafin jiki na firikwensin bawul). Kariyar tukunyar jirgi da Kariyar Komawa ba sa aiki lokacin da aka zaɓi wannan nau'in bawul. Wannan nau'in bawul ɗin yana aiki duk da yanayin bazara mai aiki, yayin da famfo ke aiki ta hanyar zaɓin rufewa. Wannan nau'in bawul yana da keɓantaccen yanayin dumama azaman aikin firikwensin yanayi.
Yana buɗewa a cikin CH calibration - Lokacin da aka kunna wannan aikin, bawul ɗin zai fara daidaitawa daga lokacin buɗewa. Wannan aikin yana samuwa ne kawai lokacin da aka saita nau'in bawul azaman CH Valve.
dumama bene - bazara - Ana kunna wannan aikin bayan zaɓi nau'in bawul azaman Valve na bene. Lokacin da aka kunna wannan aikin, bawul ɗin bene zai yi aiki a Yanayin bazara.
Kula da yanayi - Don aikin yanayi ya yi aiki daidai, ba za a iya sanya firikwensin waje a wurin da ba ya fuskantar tasirin yanayi. Ana kunna aikin firikwensin yanayi a cikin menu mai sarrafawa bayan shigarwa da haɗa firikwensin.

HANKALI

Babu wannan saitin a cikin Yanayin Sanyaya da Komawa Kariya.
Tsarin dumama - wannan shine madaidaicin bisa ga abin da aka ƙayyade yanayin zafin mai sarrafawa bisa ga zafin jiki na waje. Domin bawul ɗin ya yi aiki da kyau, an saita zafin da aka saita (ƙasa da bawul) don yanayin zafi na waje guda huɗu: -20°C, -10°C, 0°C da 10°C. Akwai keɓantaccen yanayin dumama don yanayin sanyaya, kuma an saita wannan don matsakaicin yanayin zafi na waje na 10°C, 20°C, 30°C, 40°C.

Mai kula da daki

Nau'in mai sarrafawa
- Sarrafa ba tare da mai sarrafa ɗakin ba - Ya kamata a zaɓi wannan zaɓi idan mai kula da ɗakin zai shafi aikin bawul ɗin.
- Ragewar mai sarrafa RS- Ana duba wannan zaɓin idan mai kula da daki zai sarrafa bawul ɗin sanye da sadarwar RS. Lokacin da aka zaɓi wannan aikin, mai sarrafawa zai yi aiki bisa ga tsarin Room reg. temp. ƙananan siga.
- Matsakaicin RS mai daidaitawa - Lokacin da aka zaɓi wannan mai sarrafawa, tukunyar jirgi na yanzu da zafin bawul na iya zama viewed. Tare da wannan aikin da aka duba, mai sarrafawa zai yi aiki bisa ga Bambancin Zazzabi da Matsalolin Canjin Zazzabi.
- Daidaitaccen ɗakin daki - An zaɓi wannan zaɓin idan mai kula da jihohi biyu ne zai sarrafa bawul (ba a sanye da sadarwar RS ba). Lokacin da aka zaɓi wannan aikin, mai sarrafawa zai yi aiki bisa ga tsarin Room reg. temp. ƙananan siga.
- Tsarin dakin temp. kasa - A cikin wannan saitin, ƙimar da bawul ɗin zai rage zafin da aka saita da zarar an kai ga zafin da aka saita a cikin mai sarrafa ɗaki (dumin ɗaki).
- HANKALI Wannan siga ya shafi daidaitaccen mai sarrafa ɗaki da rage ayyuka na RS.
- Bambancin zafin daki - Wannan saitin yana ƙayyade canjin naúrar a cikin zafin jiki na yanzu (zuwa 0.1 ° C mafi kusa) inda wani takamaiman canji a cikin saiti na bawul ɗin zai faru.
- Canjin yanayin zafin da aka riga aka saita- Wannan saitin yana ƙayyade adadin digiri nawa zafin bawul ɗin zai ƙaru ko raguwa tare da canjin raka'a a cikin zafin ɗakin (duba: Bambancin zafin ɗakin). Wannan aikin yana aiki ne kawai tare da mai sarrafa ɗakin RS kuma yana da alaƙa kusa da ma'aunin bambancin zafin ɗakin.
Exampda:
- Bambancin zafin ɗaki: 0.5°C
- Canjin yanayin zafin bawul: 1°C
- Saitin zafin wuta: 40°C
- Mai sarrafa ɗaki saita yanayin zafi: 23°C Idan zafin dakin ya tashi zuwa 23.5°C (ta 0.5°C sama da yanayin dakin da aka saita), bawul ɗin yana rufewa zuwa saiti na 39°C (ta 1°C).
- HANKALI Ma'aunin ya shafi aikin daidaitaccen mai sarrafa RS.
- Ayyukan mai sarrafa ɗaki - A cikin wannan aikin, dole ne a saita ko bawul ɗin zai rufe (Rufewa) ko kuma zafin jiki zai ragu (Rage yawan zafin jiki) da zarar ya zafi.
- Matsakaicin daidaituwa - Ana amfani da ƙayyadaddun ƙididdiga don ƙayyade bugun bugun bawul: mafi kusa da yanayin da aka saita, ƙarami bugun jini. Idan wannan ƙididdiga yana da girma, bawul ɗin zai kai ga buɗe irin wannan da sauri, amma zai zama ƙasa da madaidaici. Kashi na kashitage na buɗe raka'a ana ƙididdige su ta amfani da dabara mai zuwa: (saitin zafin jiki - yanayin firikwensin.) x (madaidaicin daidaituwa/10)
- Matsakaicin zafin ƙasa - Wannan aikin yana ƙayyade matsakaicin zafin jiki wanda firikwensin bawul zai iya kaiwa (idan an zaɓi bawul ɗin bene). Lokacin da wannan darajar ta kai, bawul ɗin yana rufewa, yana kashe famfo kuma gargadi game da zafi na ƙasa yana bayyana akan babban allon mai sarrafawa.
  - HANKALI Ana iya gani kawai idan nau'in bawul ɗin an saita zuwa bawul ɗin bene.
- Hanyar buɗewa - Idan, bayan haɗa bawul zuwa mai sarrafawa, ya bayyana cewa ya kamata a haɗa shi a cikin kishiyar shugabanci, ba lallai ba ne don canza layin samarwa, amma yana yiwuwa a canza hanyar buɗewa ta bawul ɗin ta zaɓin shugabanci da aka zaɓa: Dama ko Hagu.
- Zaɓin Sensor - Wannan zaɓin ya shafi firikwensin dawowa da firikwensin waje kuma yana bawa masu amfani damar tantance ko ƙarin aikin bawul ɗin yakamata yayi la'akari da na'urori masu auna firikwensin bawul ko na'urori masu auna firikwensin babban mai sarrafawa. (A cikin Yanayin Bayi kawai).
- Zaɓin firikwensin CH - Wannan zaɓi ya shafi firikwensin CH kuma yana bawa masu amfani damar tantance ko aikin bawul ɗin ya kamata yayi la'akari da na'urar firikwensin bawul ko Babban firikwensin mai sarrafawa. (Sai a cikin bawa ode).
- Kariyar tukunyar jirgi - Kariya daga matsanancin zafin jiki na CH an yi niyya don hana haɓakar haɗarin zafin jiki na tukunyar jirgi. Masu amfani za su iya saita matsakaicin madaidaicin zafin tukunyar jirgi. A cikin yanayin hawan zafin jiki mai haɗari, bawul ɗin zai fara buɗewa don kwantar da tukunyar jirgi. Masu amfani kuma za su iya saita matsakaicin halattaccen zafin jiki na CH, bayan haka bawul ɗin zai buɗe (Lura: ƙwararren mutum ne kawai ya saita shi).
  - HANKALI Aikin baya aiki don nau'ikan bawul ɗin sanyaya da bene.
- Komawa kariya - Wannan aikin yana ba da kariya ta tukunyar jirgi daga ruwan sanyi da ke dawowa daga babban da'irar - wanda zai iya haifar da ƙarancin zafin jiki na tukunyar jirgi. Kariyar dawowa tana aiki ta yadda lokacin da zafin jiki ya yi ƙasa sosai, bawul ɗin yana rufewa har sai lokacin da aka gajarta na tukunyar jirgi ya kai zafin da ake buƙata.
  - HANKALI Aikin baya bayyana don sanyaya nau'in bawul.
Bawul famfo
- Hanyoyin aikin famfo - aikin yana bawa masu amfani damar zaɓar yanayin aikin famfo:
- Koyaushe-ON - famfo yana gudana a kowane lokaci ba tare da la'akari da yanayin zafi ba
- A KASHE Koyaushe - ana kashe famfo na dindindin kuma mai sarrafawa kawai yana sarrafa aikin bawul ɗin
- Sama da bakin kofa - famfo yana kunna sama da saitin canjin yanayin. Idan ana so a kunna famfo sama da bakin kofa, dole ne a saita zazzabi mai sauyawa na bakin kofa. Ana la'akari da ƙimar daga firikwensin CH.
- Pumps suna kunna zafi.- Wannan zaɓin ya shafi aikin famfo sama da bakin kofa. Fam ɗin bawul ɗin zai kunna lokacin da firikwensin tukunyar jirgi ya kai zafin canjin famfo.
- Pump anti-stop- Lokacin da aka kunna, famfon ɗin bawul zai yi aiki sau ɗaya kowane kwanaki 10 na mintuna 2. Wannan yana hana ruwa lalata shigarwa a wajen lokacin dumama.
- Rufe ƙasa da iyakar zafin jiki - Lokacin da aka kunna wannan aikin (duba zaɓi na ON), bawul ɗin zai kasance a rufe har sai firikwensin tukunyar jirgi ya kai zafin canjin famfo.
  - HANKALI Idan ƙarin ƙirar bawul ɗin ƙirar i-1 ne, ana iya saita ayyukan famfo da rufe ƙasa da ƙasa kai tsaye daga ƙaramin menu na wannan rukunin.
- Mai sarrafa dakin famfo Valve- Zaɓin wanda mai sarrafa ɗakin zai kashe famfo da zarar ya yi zafi.
- famfo kawai- Lokacin da aka kunna, mai sarrafawa yana sarrafa famfo kawai, kuma ba a sarrafa bawul ɗin.
- Gyaran firikwensin waje - Ana amfani da wannan aikin don daidaita firikwensin waje, ana yin shi yayin shigarwa ko bayan dogon amfani da firikwensin idan yanayin zafin waje da aka nuna ya bambanta daga ainihin. Masu amfani za su iya ƙayyadadden ƙimar gyaran da za a yi amfani da su ( kewayon daidaitawa: -10 zuwa +10°C).
- Rufe Valve - Siga wanda aka saita halayen bawul a yanayin CH bayan an kashe shi. 'Kaddamar da' wannan zaɓi yana rufe bawul, yayin da' kashewa' yana buɗewa.
- Kulawar Mako-mako-Valve - Ayyukan mako-mako yana bawa masu amfani damar tsara ɓacin rai na saita zafin jiki a kan takamaiman kwanakin mako a takamaiman lokuta. Matsalolin zafin jiki da aka saita suna cikin kewayon +/-10°C. Don kunna sarrafawa na mako-mako, zaɓi kuma duba Yanayin 1 ko Yanayin 2. Ana iya samun cikakkun saitunan waɗannan hanyoyin a cikin sassan menu na ƙasa: Saita Yanayin 1 da Saita Yanayin 2.
  - HANKALI Don daidaitaccen aiki na wannan aikin, dole ne a saita kwanan wata da lokaci na yanzu.
MODE 1 - a cikin wannan yanayin, yana yiwuwa a shirya karkatattun yanayin zafin jiki na kowace rana ta mako daban. Don yin wannan:
- Zaɓi zaɓi: Saita Yanayin 1
- Zaɓi ranar mako wanda ake son canjin saitunan zafin jiki.
- Yi amfani da maɓallai don zaɓar lokacin da ake son canjin zafin jiki kuma tabbatar da zaɓin ta latsa maɓallin MENU.
- Zaɓuɓɓukan kuma suna bayyana a ƙasa, zaɓi CHANJI ta danna maɓallin MENU idan aka yi alama da fari.
- Rage ko ƙara yawan zafin jiki ta ƙimar da aka zaɓa kuma tabbatar.
- Idan ana so a yi amfani da irin wannan canjin a sa'o'i maƙwabta, danna maɓallin MENU akan saitin da aka zaɓa, sannan bayan zaɓin ya bayyana a ƙasan allon, zaɓi COPY kuma kwafi saitin zuwa sa'a mai zuwa ko baya ta amfani da maballin. Tabbatar da saitunan ta latsa MENU.
Exampda:

Lokaci Zazzabi - Saita Sarrafa mako-mako

Litinin

GABATARWA
400-700 ku +5°C

700-1400 ku -10 ° C

1700-2200 ku +7°C
- A wannan yanayin, idan yanayin zafin da aka saita akan bawul ɗin ya kasance 50 ° C, a ranar Litinin, daga 400 zuwa 700 hours, zafin da aka saita akan bawul zai ƙaru da 5 ° C, ko zuwa 55 ° C, yayin da a cikin sa'o'i daga 700 zuwa 1400, zai ragu da 10 ° C, don haka zai zama 40 ° C, kuma tsakanin 1700 da 2200 zai karu zuwa 57 ° C.
MODE 2 - a cikin wannan yanayin, yana yiwuwa a tsara sauye-sauyen zafin jiki daki-daki don duk kwanakin aiki (Litinin - Jumma'a) da kuma na karshen mako (Asabar - Lahadi). Don yin wannan:
- Zaɓi zaɓi: Saita Yanayin 2
- Zaɓi ɓangaren mako wanda ake son canji a saitunan zafin jiki
- Tsarin gaba ɗaya daidai yake da na Mode 1

Exampda:

	Lokaci	Zazzabi - Saita Sarrafa mako-mako
Litinin - Juma'a
GABATARWA	400-700 ku	+5°C
	700-1400 ku	-10 ° C
	1700-2200 ku	+7°C
Asabar – Lahadi
GABATARWA	600-900 ku	+5°C
GABATARWA	1700-2200 ku	+7°C

A wannan yanayin, idan yanayin zafin da aka saita akan bawul ɗin ya kasance 50 ° C Litinin zuwa Juma'a, daga 400 zuwa 700 - zazzabi akan bawul ɗin zai ƙaru da 5 ° C, ko zuwa 55 ° C, kuma a cikin sa'o'i daga 700 zuwa 1400 - zai ragu da 10 ° C, don haka zai zama 40 ° C, yayin da tsakanin 1700 da 2200 - zai ƙaru zuwa 57 ° C. A karshen mako, daga 600 zuwa 900 hours - zafin jiki a kan bawul zai tashi da 5 ° C, wato zuwa 55 ° C, kuma tsakanin 1700 da 2200 - zai tashi zuwa 57 ° C.
Saitunan masana'anta - Wannan siga yana haifar da komawa zuwa saitunan bawul ɗin da aka bayar da mai ƙira ya adana. Maido da saitunan masana'anta yana canza nau'in bawul zuwa bawul ɗin CH.

INTERNET MODULE

Tsarin Intanet na'ura ce da ke ba da damar sarrafa ramut na shigarwa. Masu amfani za su iya sarrafa aikin na'urori daban-daban kuma su canza wasu sigogi ta hanyar emodul.eu. aikace-aikace. Na'urar tana da ginanniyar tsarin Intanet. Bayan kunna tsarin Intanet kuma zaɓi zaɓi na DHCP, mai sarrafawa zai dawo ta atomatik ta hanyar sadarwar gida sigogin adireshin IP, mashin IP, adireshin Ƙofar, da adireshin DNS.

Saitunan cibiyar sadarwa da ake buƙata
Domin tsarin Intanet ya yi aiki daidai, ana buƙatar haɗa na'urar zuwa cibiyar sadarwa tare da uwar garken DHCP da tashar tashar jiragen ruwa ta 2000. Da zarar an haɗa tsarin Intanet da kyau zuwa cibiyar sadarwar, je zuwa menu na saitunan module (a cikin mai sarrafa mai sarrafawa). ). Idan cibiyar sadarwar ba ta da uwar garken DHCP, dole ne a saita tsarin Intanet ta mai gudanarwa ta shigar da sigogi masu dacewa (DHCP, Adireshin IP, Adireshin Ƙofar, Mashin Subnet, Adireshin DNS).

Jeka menu na saituna na tsarin Intanet.
Zaɓi zaɓin "ON".
Sannan duba idan an duba zaɓin "DHCP".
Shigar da "Zabin WIFI"
Sannan zaɓi cibiyar sadarwar WIFI kuma shigar da kalmar wucewa.
Jira na ɗan lokaci (kimanin minti 1) kuma duba idan an sanya adireshin IP ɗin. Je zuwa shafin "IP Address" kuma duba idan darajar ta bambanta da 0.0.0.0/ -.-.-.- .
- a. Idan har yanzu darajar tana nuna 0.0.0.0 / -.-.-.-.- , duba saitunan cibiyar sadarwa ko haɗin Ethernet tsakanin tsarin Intanet da na'urar.
Bayan sanya adireshin IP daidai, yi rijistar tsarin don samar da lambar da ake buƙata don sanya shi zuwa asusun aikace-aikacen.

HANYAR HANYA

Wannan aikin yana ba masu amfani damar sarrafa aikin na'urori ɗaya. Masu amfani za su iya canzawa da hannu akan kowane ɗayan na'urorin: famfo, mai yuwuwar lambar sadarwa da masu kunna bawul guda ɗaya. Ana ba da shawarar yin amfani da yanayin hannu don bincika daidai aikin da ya haɗa na'urorin a farkon farawa.

SENSOR NA WAJE
HANKALI

Ana samun wannan aikin ne kawai lokacin da aka yi rajistar firikwensin waje na EU-C-8zr a cikin EU-L-4X WiFi mai sarrafa.
Rijista firikwensin waje yana ba masu amfani damar kunna sarrafa yanayi.
- Zaɓin Sensor - don zaɓar firikwensin EU-C-8zr mara waya wanda ke buƙatar rajista.
- Daidaitawa - Ana yin gyare-gyaren a lokacin shigarwa ko bayan dogon amfani da firikwensin idan zafin da aka auna ta firikwensin ya bambanta daga ainihin zafin jiki. Matsakaicin daidaitawa shine daga -10 ° C zuwa + 10 ° C tare da mataki na 0.1 ° C.
A cikin yanayin firikwensin mara waya mai rijista, sigogin da suka biyo baya suna da alaƙa da kewayo da matakin baturi.

RUWAN DUFA
Ayyuka don hana masu kunnawa kunnawa a ƙayyadaddun tazarar lokaci.

Saitunan kwanan wata
- Kashe dumama - Don saita ranar da za a kashe dumama
- Kunna dumama - Don saita kwanan wata daga abin da za a kunna dumama
- Kula da yanayi - Lokacin da aka haɗa firikwensin waje, babban allon zai nuna zafin waje, yayin da menu mai sarrafawa zai nuna matsakaicin zafin jiki na waje.
Ayyukan da ke dogara da zafin jiki na waje yana ba da damar ƙayyade ma'aunin zafin jiki, wanda zai yi aiki bisa ga ma'aunin zafin jiki. Idan matsakaicin zafin jiki ya wuce ƙayyadadden madaidaicin zafin jiki, mai sarrafawa zai kashe dumama yankin da aikin sarrafa yanayi ke aiki.
- ON - don amfani da sarrafa yanayin, dole ne a kunna firikwensin da aka zaɓa
- Matsakaicin lokaci - masu amfani sun saita lokacin akan abin da za'a ƙididdige ma'aunin zafin jiki na waje. Kewayon saitin yana daga 6 zuwa 24 hours.
- Matsakaicin zafin jiki - wannan aiki ne na kariya daga dumama yankin da aka bayar. Yankin da aka kunna sarrafa yanayin za a toshe shi daga zazzaɓi idan ma'aunin zafin rana na waje ya wuce yanayin zafin da aka saita. Domin misaliampHar ila yau, lokacin da yanayin zafi ya tashi a lokacin bazara, mai sarrafawa zai toshe dumama ɗakin da ba dole ba.
- Matsakaicin zafin jiki na waje - ƙididdige ƙimar zafin jiki dangane da Matsakaicin lokacin

LAMBAR KYAU-KYAUTA

Mai kula da WiFi na EU-L-4X zai kunna lambar sadarwar da ba ta da kyauta (bayan kirga lokacin jinkiri) lokacin da kowane yanki bai kai ga yanayin da aka saita ba (dumi - lokacin da yankin ke da zafi, sanyaya - lokacin da zazzabi a cikin zone yayi yawa). Mai sarrafawa yana kashe lambar sadarwa da zarar an kai saitin zafin jiki.

Jinkirin aiki - aikin yana bawa masu amfani damar saita lokacin jinkiri na kunnawa mai yuwuwar lambar sadarwa mara amfani bayan yanayin zafi ya faɗi ƙasa da yanayin da aka saita a kowane yanki.

PUMP

Mai kula da EU-L-4X WiFi yana sarrafa aikin famfo - yana kunna famfo (bayan ƙidaya lokacin jinkiri) lokacin da kowane yanki ya yi zafi kuma lokacin da aka kunna zaɓin famfo na bene a cikin yankin. Lokacin da duk yankuna suka yi zafi (aka saita yanayin zafin jiki), mai sarrafawa yana kashe famfo.

Jinkirin aiki - aikin yana bawa masu amfani damar saita lokacin jinkiri na kunna famfo bayan yanayin zafi ya faɗi ƙasa da yanayin da aka saita a kowane yanki. Ana amfani da wannan jinkirin kunnawa don ƙyale mai kunna bawul ya buɗe.

DUMI-DUMINSU - SANYI

Aikin yana bawa masu amfani damar zaɓar yanayin aiki:

Dumama – duk yankuna suna zafi
Sanyi – duk yankuna suna sanyaya
Na atomatik - Mai sarrafawa yana canza yanayin tsakanin dumama da sanyaya dangane da shigarwar jihohi biyu

KAYAN TSAYA TSAYA

Wannan aikin yana tilasta aikin famfo da bawuloli (duba zaɓi na farko), wanda ke hana ƙaddamar da sikelin a cikin tsawon lokacin rashin aiki na famfo da bawuloli, misali a waje da lokacin dumama. Idan an kunna wannan aikin, famfo da bawuloli za su kunna don saita lokaci kuma tare da takamaiman tazara (misali kowane kwanaki 10 na mintuna 5.)

MAFI TSINCI

Idan yanayin zafi na yanzu ya fi girma da matsakaicin zafi da aka saita, za a cire haɗin sanyaya na yankin.
HANKALI Aikin yana aiki ne kawai a yanayin sanyaya, in dai an yi rajistar firikwensin da ke da ma'aunin zafi a yankin.

HARSHE

Ayyukan yana ba masu amfani damar canza sigar harshe mai sarrafawa.

BATSA KONA

Wannan tsari ne da aka keɓe don shigarwa mai aiki tare da famfo mai zafi kuma yana ba da damar yin amfani da mafi kyawun damarsa.
- Yanayin adana makamashi - Zaɓin wannan zaɓi zai fara yanayin kuma ƙarin zaɓuɓɓuka za su bayyana
- Mafi ƙarancin lokacin hutu - ma'aunin da ke iyakance adadin maɓalli na kwampreso, wanda ke ba da damar tsawaita rayuwar kwampreso. Ba tare da la'akari da buƙatar sake yin zafi da yankin da aka ba ba, compressor zai fara ne kawai bayan lokacin da aka ƙidaya daga ƙarshen aikin da ya gabata ya wuce.
- Ketare - wani zaɓi da ake buƙata idan babu buffer da famfo mai zafi tare da ƙarfin zafi mai dacewa. Ya dogara da jeri-jere na buɗe yankuna na gaba kowane ƙayyadadden lokaci.
- famfon kasa – kunna / kashe famfo bene
- Lokacin zagayowar - lokacin da za a buɗe yankin da aka zaɓa don shi

SIFFOFIN FARKO

Ayyukan yana ba masu amfani damar komawa zuwa saitunan menu na fitter da mai ƙira ya adana.

MENU na HIDIMAR

Menu na sabis na mai sarrafawa yana samuwa ga mutane masu izini kawai kuma ana kiyaye shi ta lambar mallakar mallakar Tech Sterowniki.

SIFFOFIN FARKO

Ayyukan yana ba masu amfani damar komawa zuwa saitunan tsoho na mai sarrafawa kamar yadda mai ƙira ya bayyana.

SHARHIN SOFTWARE

Lokacin da aka kunna wannan zaɓi, tambarin masana'anta zai bayyana akan nuni, tare da lambar sigar software mai sarrafawa. Ana buƙatar sake fasalin software lokacin tuntuɓar sabis na Tech Sterowniki.

LISHIN ARArrawa

Ƙararrawa	Dalili mai yiwuwa	Yadda za a gyara shi
Sensor ya lalace ( firikwensin ɗaki, firikwensin bene)	Sensor ya gajarta ko ya lalace	– Duba haɗin kai tare da firikwensin - Maye gurbin firikwensin tare da sabo ko tuntuɓi ma'aikatan sabis idan ya cancanta.
Babu sadarwa tare da firikwensin / mai sarrafa mara waya	– Babu iyaka – Babu baturi – Baturi mai ƙarfi	- Sanya firikwensin / mai kula da shi a wani wuri daban – Saka batura a cikin firikwensin/mai sarrafa Ƙararrawar tana kashe ta atomatik lokacin da aka kafa sadarwa.
Babu sadarwa tare da module / iko panel / mara waya lamba	Babu kewayo	- Sanya na'urar a wani wuri daban ko amfani da mai maimaitawa don tsawaita kewayon. Ƙararrawar tana kashe ta atomatik lokacin da aka kafa sadarwa.
Sabunta software	Sigar sadarwar tsarin a cikin na'urorin biyu ba su dace ba	Sabunta software zuwa sabon sigar.

STT-868 mai kunnawa ƙararrawa
KUSKURE #0	Flat baturi a cikin actuator	Sauya batura
KUSKURE #1	Wasu inji ko lantarki sassan sun lalace	Tuntuɓi ma'aikatan sabis
KUSKURE #2	- Babu fistan da ke sarrafa bawul – Yawan bugun jini (motsi) na bawul – An yi kuskure an saka mai kunnawa akan radiyo - Bawul ɗin da bai dace ba akan radiyo	– Shigar da fistan mai sarrafa mai kunnawa – Duba bugun bawul – Shigar da actuator daidai – Maye gurbin bawul akan radiator
KUSKURE #3	– Bawul ya makale - Bawul ɗin da bai dace ba akan radiator – Yawan bugun jini (motsi) na bawul	- Duba aikin bawul – Maye gurbin bawul akan radiator – Duba bugun bawul
KUSKURE #4	– Babu iyaka – Babu batura	– Bincika nisa tsakanin mai kunnawa da mai sarrafawa – Saka batura a cikin mai kunnawa Bayan an sake kafa sadarwa, ana kashe ƙararrawa ta atomatik.
STT-869 mai kunnawa ƙararrawa
KUSKURE #1 - Kuskuren daidaitawa 1 - Matsar da dunƙule zuwa matsayi mai hawa	– Ƙarfin firikwensin sauyawa ya lalace	– sake calibrate actuator ta hanyar riƙe maɓallin sadarwa har sai haske na uku na kore – Kira ma'aikatan sabis
KUSKURE #2 - Kuskuren daidaitawa 2 - An fitar da dunƙule mafi yawa. Babu juriya yayin ja daga	– Ba a dunƙule na’urar kunnawa zuwa bawul ko kuma ba a murɗa shi gaba ɗaya ba - bugun bugun bawul ya yi girma sosai ko kuma girman bawul ɗin ba na al'ada ba ne – Aiki na yanzu firikwensin ne lalace	– Bincika idan an shigar da mai sarrafawa yadda ya kamata – Sauya batura – sake calibrate actuator ta hanyar riƙe maɓallin sadarwa har sai haske na uku na kore – Kira ma'aikatan sabis
KUSKURE #3 - Kuskuren daidaitawa 3 - Ba a fitar da dunƙule sosai ba – dunƙule ya gamu da juriya da wuri	- Ƙwararren bawul ɗin ya yi ƙanƙara ko kuma girman bawul ɗin ba na al'ada ba ne – Aiki na yanzu firikwensin ne lalace – Ƙananan matakin baturi	– Sauya batura – Kira ma'aikatan sabis
KUSKURE #4 - Babu martani	– An kashe babban mai sarrafa - Rashin ƙarancin kewayon ko babu kewayo don haɗawa tare da mai sarrafa – Radio module a cikin actuator ne lalace	– Bincika idan babban mai sarrafa yana kunne – Rage nisa daga mai sarrafa – Kira ma'aikatan sabis
KUSKURE #5 - Ƙananan matakin baturi	Baturin lebur ne	– Sauya batura
KUSKURE #6 - An kulle Encoder	Mai rikodin ya lalace	– sake calibrate actuator ta hanyar riƙe maɓallin sadarwa har sai haske na uku na kore – Kira ma'aikatan sabis
KUSKURE #7 - Zuwa babban voltage	– Rashin daidaituwa na dunƙule, zaren da sauransu na iya haifar da juriya mai yawa – Too high juriya na kaya ko mota

	– Firikwensin na yanzu ya lalace
KUSKURE #8 - Iyakance kuskuren firikwensin firikwensin	Ƙayyadadden firikwensin sauyawa ya lalace
EU-GX actuator ƙararrawa
KUSKURE #1 - Kuskuren daidaitawa 1	Juyawar Bolt zuwa matsayi na hawa ya ɗauki tsayi da yawa.	Kulle/lalacewar fistan actuator. Duba taron kuma sake daidaitawa mai kunnawa.
KUSKURE #2 - Kuskuren daidaitawa 2	Bolt ya tsawaita sosai saboda bai gamu da wani juriya ba yayin tsawaitawa.	– Ba a dunƙule mai kunnawa da kyau akan bawul ɗin – Ba a cika matse mai kunnawa akan bawul ɗin ba – Motsi na actuator ya wuce kima, ko bawul ɗin da ba daidai ba ci karo – gazawar ma'aunin injin ya faru Duba taron kuma sake daidaitawa mai kunnawa.
KUSKURE #3 - Kuskuren daidaitawa 3	Tsawon Bolt gajarta sosai. Kullin ya gamu da juriya da wuri yayin aikin daidaitawa.	– motsi bawul ya yi ƙanƙanta sosai, ko bawul ɗin da ba daidai ba ci karo – gazawar auna mashin mota – Ma’aunin lodin mota bai yi daidai ba saboda ƙarancin cajin baturi Duba taron kuma sake daidaitawa mai kunnawa.
KUSKURE #4 - Kuskuren sadarwa na mai kunnawa.	A cikin mintuna x na ƙarshe, mai kunnawa bai karɓi fakitin bayanai ta hanyar sadarwa mara waya ba. Bayan an kunna wannan kuskuren, mai kunnawa zai saita kansa zuwa 50% buɗewa. Kuskuren zai sake saitawa bayan bayanai an karɓi kunshin.	– An kashe babban mai kula – sigina mara kyau ko babu sigina da ta samo asali daga mai sarrafa mai sarrafa – m RC module a cikin actuator
KUSKURE #5 - Baturi ya ragu	Mai kunnawa zai gano maye gurbin baturi bayan juzu'itage ya tashi ya kaddamar da calibration	– baturi ya ƙare
KUSKURE #6	-	-
KUSKURE #7 - An katange mai kunnawa		- yayin da ake canza buɗaɗɗen bawul, an fuskanci nauyin da ya wuce kima Recalibrate da actuator.

KYAUTA SOFTWARE

Don loda sabon software, cire haɗin mai sarrafawa daga hanyar sadarwa, saka kebul na filashin USB mai ɗauke da sabuwar software a cikin tashar USB, sannan haɗa mai sarrafawa zuwa cibiyar sadarwar - yayin riƙe maɓallin EXIT. Riƙe maɓallin EXIT har sai an ji ƙara guda ɗaya yana alamar fara loda sabuwar software. Da zarar an gama aikin, mai sarrafawa zai sake farawa.

HANKALI

Tsarin loda sabbin software zuwa mai sarrafawa na iya aiwatar da shi ta hanyar ƙwararren mai sakawa. Bayan canza software, ba zai yiwu a mayar da saitunan da suka gabata ba.
Kar a kashe mai sarrafawa yayin sabunta software.

DATA FASAHA

Tushen wutan lantarki	230V ± 10% / 50 Hz
Max. amfani da wutar lantarki EU-L-4X WiFi	4W
Max. amfani da wutar lantarki EU-L-4X WiFi + EU-ML-4X WiFi	5W
Yanayin aiki	5 ÷ 50 ° C
Matsakaicin nauyin abubuwan da za a iya samu 1-4	0.3 A
Matsakaicin nauyin famfo	0.5 A
Ci gaba mai yuwuwar rashin kyauta. ba . fita. kaya	230V AC / 0.5A (AC1) * 24V DC / 0.5A (DC1) **
Juriya na thermal na firikwensin NTC	-30 ÷ 50 ° C
Mitar aiki	868MHz
Fuse	6.3 A
Watsawa IEEE 802.11 b/g/n

AC1 category: Load-lokaci ɗaya, mai juriya, ko ɗan inductive AC lodi.
Nau'in lodi na DC1: kai tsaye halin yanzu, resistive, ko dan kadan inductive kaya.

SANARWA DA DALILAI

SANARWA TA EU NA DACEWA

Ta haka, muna ayyana ƙarƙashin alhakinmu kawai cewa EU-L-4X WiFi ta TECH STEROWNIKI II Sp. z oo, wanda ke da hedkwata a Wieprz Biała Droga 31, 34-122 Wieprz, ya bi umarnin 2014/53/EU na Majalisar Turai da na Majalisar 16 Afrilu 2014 kan daidaita dokokin Membobin Kasashe da suka shafi Samar da samuwa a kasuwannin kayan aikin rediyo, Jagoran 2009/125/EC da ke kafa tsari don saitin buƙatun ecodesign don samfuran da ke da alaƙa da makamashi da kuma ka'idojin da Ma'aikatar Kasuwanci da Fasaha ta 24 ga Yuni 2019 tana gyara ƙa'idar. Abubuwan da ake buƙata masu mahimmanci dangane da ƙuntatawa na amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da lantarki, aiwatar da tanadi na Umarni (EU) 2017/2102 na Majalisar Turai da na Majalisar 15 Nuwamba 2017 gyara Umarnin 2011/65/EU kan ƙuntatawa na amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki (OJ L 305, 21.11.2017, shafi 8).

Don kimanta yarda, an yi amfani da ma'auni masu jituwa:

PN-EN IEC 60730-2-9: 2019-06 art. 3.1a Amintaccen amfani
PN-EN IEC 62368-1: 2020-11 art. 3.1 Amintaccen amfani
PN-EN 62479: 2011 art. 3.1 Amintaccen amfani
TS EN 301 489-1 V2.2.3 (2019-11) art.3.1b Daidaitawa na lantarki
TS EN 301 489-3 V2.1.1 (2019-03) art.3.1 b Daidaitawar lantarki
TS EN 301 489-17 V3.2.4 (2020-09) art.3.1b Daidaitawa na lantarki
ETSI EN 300 328 V2.2.2 (2019-07) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Amfani mai inganci da haɗin kai na bakan rediyo
PN EN IEC 63000: 2019-01 RoHS
Laraba, 02.02.2024
hedkwatar tsakiya: ul.Biata. Droga 31. 34-122 Wieprz
Sabis: ul.Skotnica 120. 32-652 Bulowice
Waya: +48 33 875 93 80
e-mail: serwiz@techsterowniki.pl.

Hotuna da zane-zane da ke ƙunshe a cikin takaddar suna yin amfani da dalilai na misali kawai. Mai sana'anta yana da haƙƙin gabatar da canje-canje.

Takardu / Albarkatu

	TECH CONTROLERS EU-L-4X WiFi Mai Kula da Waya mara waya [pdf] Manual mai amfani EU-L-4X WiFi Wireless Wire Controller, EU-L-4X WiFi, Mara waya Mai Kula da Waya, Mai Kula da Waya, Mai Sarrafa
	TECH CONTROLERS EU-L-4X WiFi Mai Kula da Waya mara waya [pdf] Manual mai amfani EU-L-4X WiFi, EU-L-4X WiFi Mai Kula da Waya mara waya, EU-L-4X WiFi, Mai Kula da Waya mara waya, Mai Kula da Waya, Mai sarrafawa

Magana

Manual mai amfani

TECH CONTROLERS EU-L-4X WiFi Mai Kula da Waya mara waya

Bayanin samfur

Umarnin Amfani da samfur

FAQs

TSIRA

BAYANI AKAN tsarin

FARKO NA FARKO

BAYANIN BAYANIN ALAMOMIN

AYYUKAN MULKI

LISHIN ARArrawa

KYAUTA SOFTWARE

DATA FASAHA

SANARWA DA DALILAI

Takardu / Albarkatu

Magana

Bar sharhi

Soke amsa

	Lokaci	Zazzabi - Saita Sarrafa mako-mako
Litinin
GABATARWA	400-700 ku	+5°C
	700-1400 ku	-10 ° C
	1700-2200 ku	+7°C