synapse EMB-S2-A Controller

Mai Kula da EMB-S2-A

• Ƙimar lodi: 12 zuwa 24VDC, +/- 10%, 700mW max
• Yanayin Aiki: -40 zuwa + 80 C / Yanayin aiki: 10 zuwa 90%, ba mai haɗawa ba

GARGADI DA HANKALI:

• DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA GWADA WUTA TA KASHE KAFIN SAKA!
• ABUBUWAN DA YA KAMATA ANA BUKATA DON GUJEWA TSAYE TSAYE WANDA ZAI IYA CUTAR DA MASU MANA A LOKACIN SHIGA.

GARGADI DA HANKALI:

• DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA GWADA WUTA TA KASHE KAFIN SAKA!
• ABUBUWAN DA YA KAMATA ANA BUKATA DON GUJEWA TSAYE TSAYE WANDA ZAI IYA CUTAR DA MASU MANA A LOKACIN SHIGA.

BAYANI

• Matsakaicin Load Control: 30mA Source/Sink
• Adadin Rediyo: 2.4GHz (IEEE 802.15.4)
• Ƙarfin fitarwa na RF: + 19 dBM
• Yanayin Aiki: -40 zuwa +80 C
• Humidity Mai Aiki: 10 zuwa 90%, wanda ba a haɗa shi ba
• Max D4i Direbobi: Iyakance zuwa iyakar 6 D4i LED Drivers, kowane D4i LED Direbobi>4 zai buƙaci naƙasasshen wutar lantarki.
• Girman Waya: 20 AWG, 7" Wayoyi, 600V
• Girma: 3.05"L x 2.21"W x .47"H (77.6 x 56.1 x 11.8 mm)

HANKALI
EMB-S2-A dole ne a shigar da masu kula da su daidai da lambobi da buƙatun lantarki na ƙasa, jiha, da na gida.

HANYOYIN TSIRA

A ƙasa akwai wasu shawarwari don samun nasarar dimming ta amfani da EMB-S2-A. Ana yin la'akari da wayoyi masu sarrafa dimming azaman DIM+ da DALI-/COM. Sigina masu raguwa suna da madaidaicin voltagda 10V DC.

• Kar a yi ƙasa da waya ta DALI-/COM zuwa ƙasan chassis; wannan sigina ce ta dawowa kuma yana da mahimmanci don dimming daidai.
• Hanyar dimming wayoyi daga layin AC idan zai yiwu.
• Matsakaicin 4 DALI-2/D4i LED Direbobi a kowane mai sarrafawa don ƙirar DALI-2/D4i.
• Matsakaicin 0f 8 DIM zuwa KASHE Direbobin LED don DIM zuwa KASHI.
• Kar a hau zuwa heatsink ko zuwa direban LED.
• Lokacin shigar da EMB-S2-A cikin yadi, ana buƙatar la'akari da matsayin eriya na waje da tsangwama don samar da mafi kyawun ƙarfin siginar mara waya. Kafin hawansa na dindindin, tabbatar da cewa eriya ta nuna sama ko ƙasa kai tsaye kuma ba ta da kowane ƙarfe a cikin inci 12 na eriya (Hoto na 1).

KAYAN BUKATA

• Hardware mai hawa: (2) # 4 da M3 screws shawarar
• Antenna KitDon samun zaɓuɓɓukan eriya da fatan za a koma zuwa sabbin takaddun mu da ke kan mu website. www.synapsewireless.com/documentation

UMARNIN SHIGA

GARGADI: DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA TABBATAR DA WUTA YA KASHE KAFIN WAYA!

HAUWA

1. Sanya mai sarrafawa a wurin da ake so kuma a kiyaye shi ta amfani da sukurori masu girman girman #4 ko M3 ta amfani da ramukan hawa da ke gefen baya na EMB-S2-A.
   HANKALI DA ANTENNA
2. Tabbatar cewa an kashe wutar. Lokacin sarrafa kebul na eriya, mai fasaha dole ne ya zama ƙasa tare da madaidaiciyar madaurin ƙasa.
3. Cire murfin kura jan roba, mai wanki, da goro daga mahaɗin eriya.
4. Ƙayyade mafi kyawun wuri don matsayi na eriya na waje kuma ƙirƙirar buɗaɗɗe don hawa eriya da babban kan (Duba Hoto 2 don aunawa).
5. Ciyar da babban kan ta hanyar buɗewa a cikin kayan aiki. (Lura: Matsakaicin kauri na bangon gyarawa shine 6mm ko 0.25 inci. Wannan yana ba da damar isashen zaren a waje na kayan aiki don haɗin eriya mai kyau.)
6. Sanya mai wanki da goro a kan mai haɗin eriya kuma amintacce don daidaitawa.
7. Dunƙule a kan eriya hannun m. Matse juzu'i 1/4 tare da nau'i-nau'i na hancin allura. Kar a ƙara ƙarfi sosai ko fil ɗin RF a cikin babban kan zai tsage, haifar da rashin ingancin hanyar haɗin RF.
   WIRING THE EMB-S2-A MULKI
   Lura: Sai dai in an fayyace, haɗin kai zuwa daidaitaccen direban Dim to Off LED da direban LED DALI 2 iri ɗaya ne.
8. Haɗa fitowar 12-24VDC Aux daga direban LED zuwa (POWER = BROWN waya na EMB-S2-A.
9. Haɗa waya (DALI-/COMMON = Pink/WHITE STRIPE) na EMB-S2-A zuwa COMMON/DALI- ko COMMON/DIM- dangane da direban LED da kake da shi.
   HANYAR SANSORA
   • Lura: Matakai 10-14 sune don ƙara na'urori masu auna firikwensin zuwa mai sarrafa EMB-S2-A; idan ba ku haɗa na'urori masu auna sigina ku tsallake wannan sashin. Akwai abubuwan shigar da firikwensin guda biyu akan EMB-S2-A wanda aka ƙera don nau'in firikwensin ƙananan ƙarfi (24V DC).
   • Ana amfani da waya (SENSOR A = YELLOW) don haɗa firikwensin A.
   • Ana amfani da waya (SENSOR B = ORANGE) don haɗa firikwensin B.
10. Haɗa wayar wutar firikwensin zuwa AUX a kan direban LED (direban LED yana ba da firikwensin).
11. Haɗa firikwensin DALI-/COMMON zuwa COMMON/DALI- ko na kowa/DIM- dangane da direban LED da kake da shi.
12. Haɗa firikwensin CTRL/Control waya zuwa waya (SENSOR A = YELLOW) ko waya (SENSOR B = ORANGE) na mai sarrafa EMB-S2-A.
13. Idan kana amfani da firikwensin fiye da ɗaya to kwafin shigarwa kamar yadda aka bayyana a sama.
14. Dole ne a saita na'urori masu auna firikwensin a cikin software kafin su yi aiki a cikin tsarin SimplySnap. (Dubi Figures 3 DA 4)
    HAƊA DA'IYYAR DIMMING
    Lura: Matakai 15-17 sune don haɗawa har zuwa Madaidaicin Dim zuwa Kashe direban LED; idan kana amfani da direban LED DALI 2 tsallake zuwa matakai 18-20.
15. Haɗa waya (DIM+ = PURPLE) daga EMB-S2-A zuwa waya ta DIM+ akan direban LED.
16. Haɗa waya (DALI-/COMMON = Pink/WHITE STRIPE) daga EMB-S2-A zuwa wayar DIM akan direban LED.
17. Wayoyi marasa amfani (DALI+ = PURPLE/WHITE STRIPE) wayoyi. (Dubi Hoto na 3)
    Lura: Matakai 18-20 sune don haɗawa zuwa direban LED DALI 2.
18. Haɗa EMB-S2-A (DALI-/COMMON = Pink/WHITE STRIPE) zuwa COMMON/DALI- waya akan direban LED.
19. Haɗa wayar (DALI+ = PURPLE/WHITE STRIPE) daga EMB-S2-A zuwa direban LED DALI+.
20. Sanya waya mara amfani (DIM+ = PURPLE). (Duba Hoto na 4)

KARFAFA KYAUTA DA MAI MULKI

Bayan haɗa Mai Gudanarwa zuwa Direban LED da kowane na'urori masu auna firikwensin, tabbatar da rufe duk wayoyi marasa amfani. Kunna wutar lantarki zuwa kayan aiki. Hasken ya kamata ya kunna.

LATSA

Lura: Lokacin da aka kunna mai sarrafawa waɗannan launuka suna nuna halin yanzu.

• Ja = Babu hanyar sadarwa da aka samo (Bace Sadarwa)
• Green Blinking = An samo hanyar sadarwa, Ba a saita Mai Sarrafa ba (har yanzu ba a ƙara na'urar zuwa SimplySnap ba)
• Green = An samo hanyar sadarwa, An saita Mai sarrafawa (Aiki na yau da kullun)

Koma zuwa littafin Mai amfani na SimplySnap don bayani kan samar da EMB-S2-A.

Hoto na 3 – DIM zuwa KASHE zanen Waya

Hoto 4 - DALI-2 Tsarin Waya

GARGADI: 

• Idan ana amfani da mai sarrafa Synapse guda d don fitar da shigar DIM+ na direbobi masu yawa na LED, to, dole ne a haɗa duk layin DIM daga duk direbobi kai tsaye tare don samar da dawowa/ƙasa na gama gari ga mai sarrafawa.
• Synapse ba zai ba da garanti ba ko kuma ya zama abin dogaro ga ƙira tare da kowace hanyar lantarki ta layukan ma'aikata g DIM daga direbobi da yawa.

BAYANIN HUKUNCI DA TABBAS

Bayanin Bayyanar RF: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo da jikinka. Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.

Takaddun shaida na Masana'antu Kanada (IC): Wannan na'urar dijital ba ta wuce iyakokin Class B don hayaniya ta rediyo daga na'urar dijital da aka tsara a cikin Dokokin tsoma bakin Rediyo na Sashen Sadarwa na Kanada. Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicable aux appareils numeriques de la class B prescrites dans da Reglement su da brouillage radioelectrique edicte par le ministere des Communications du Canada.

Takaddun shaida na FCC da bayanan tsari (Amurka kawai)

FCC Sashi na 15 Class B: Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Waɗannan na'urori na iya haifar da tsangwama mai cutarwa, kuma (2) Dole ne waɗannan na'urori su karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki mai cutarwa.

RADIO YAWAN KATSINA (RFI) (FCC 15.105): An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar dashi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan: (1) Sake daidaitawa. ko kuma sake mayar da eriyar karɓa; (2) Ƙara rarrabuwa tsakanin kayan aiki da mai karɓa; (3) Haɗa kayan aiki zuwa wata maɓalli a kan wani da'ira daban-daban da wanda aka haɗa mai karɓa zuwa gare shi; (4) Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Bayanin Daidaitawa (FCC 96-208 & 95-19): Synapse Wireless, Inc. ya bayyana cewa sunan samfurin "EMB-S2-A" wanda wannan sanarwar ke da alaƙa da ita, ya cika buƙatun da Hukumar Sadarwa ta Tarayya ta kayyade kamar yadda dalla-dalla a cikin cikakkun bayanai masu zuwa:

• Sashe na 15, Ƙarshen B, don kayan aikin Class B
• FCC 96-208 kamar yadda ya shafi kwamfutoci masu zaman kansu na Class B da kayan aiki
• An gwada wannan samfurin a dakin gwaje-gwaje na waje wanda aka tabbatar da shi bisa ga ka'idodin FCC kuma an same shi ya dace da FCC, Sashe na 15, Iyakokin fitarwa. Ana kunna takaddun file kuma ana samun su daga Synapse Wireless, Inc.

Idan FCC ID na module ɗin da ke cikin wannan shingen samfur ba a iya gani lokacin shigar da shi a cikin wata na'ura, to dole ne wajen na'urar da aka shigar da wannan samfurin a ciki dole ne ya nuna alamar da ke magana da FCC ID ɗin da ke kewaye. Canje-canje (FCC 15.21): Canje-canje ko gyare-gyare ga wannan kayan aikin da Synapse Wireless, Inc. ya amince da shi kai tsaye, na iya ɓata ikon mai amfani don sarrafa wannan kayan aikin.

TAMBAYOYI

• Samfura Saukewa: EMB-S2-A
• Ya ƙunshi ID na FCC: U9O-SM520
• Ya ƙunshi IC: 7084A-SM520
• UL File A'a: E346690

DALI-2 Ingantacciyar Mai Kula da Aikace-aikacen

Tuntuɓi Synapse don Tallafawa- 877-982-7888

Samar da haƙƙin mallaka - alamar kama-da-wane a https://www.synapsewireless.com/about/patents

Takardu / Albarkatu

synapse EMB-S2-A Controller [pdf] Jagoran Shigarwa EMB-S2-A Mai Kula, EMB-S2-A, Mai Sarrafa

Magana

• Manual mai amfani