Kwamitin VESA na gaskiya - Nuni Guda
Saurin-Fara Jagora

Shafin samfur (MONPROTECT)

Na baya View

Bangaren		Aiki
1	Ramin Gudanar da Cable	Hanya ta Ƙarfi kuma Igiyoyin bidiyo domin  Nunawa ta hanyar wannan budewa a cikin m Kwamitin VESA
2	VESA Dutsen Ruwa	Saka 4 na girman da ya dace Sukurori ta hanyar Masu wanki, da Tsarin VESA, da m Kwamitin VESA, girman da adadin da ya dace 5 mm da/ko 20mm sarari, kuma cikin Nunawa
3	Tabbataccen VESA Panel	Share takardar acrylic Nauyin - 8.3 lb. (3.76 kg) Uku hawa hawa Mafi ƙarancin tsawo (daga Yin hawa Surface zuwa tsakiyar Dutsen VESA) - 9.7 inch (245 mm)

Abubuwan bukatu

Don sabbin buƙatun, don Allah ziyarci: www.startech.com/MONPROTECT

• Tsabta, Flat, da Stable Surface don Shigarwa
• Nuna tare da 75 x 75 mm ko 100 x 100 mm Spased VESA Mount Holes
• Kula da Dutsen tare da Matsayin Dutsen VESA Guda ɗaya
  Tuntuɓi Jagorar Mai Amfani don Dutsen Kulawa ko tuntuɓi mai ƙera Dutsen Kulawa don sanin idan Dutsen Kulawa zai iya tallafawa nauyin haɗuwar Kwamitin VESA na gaskiya da Nuni.
•  Phillips Head Sukudireba
• Mutane Biyu don Shigarwa da Gyara
• (Na zaɓi - don tsaftacewa) Zane na Microfiber

Shigarwa

Gargadi: Shigar da Kwamitin VESA Mai Bayyanawa aiki ne na mutum biyu. Kada a yi ƙoƙarin kammala shigarwa tare da mutum ɗaya.
Ƙarin nauyin Kwamitin VESA Mai Bayyanawa na iya ɗaukar nauyin Kulawa
Dutsen yayin shigarwa da/ko amfani. Kada ku wuce ƙarfin nauyi na Dutsen Kulawa.
(Don Nuni Tuni An Haɗe zuwa Dutsen) Cire Nuni

• Cire Nuni daga Dutsen Kulawa.
  Lura: Koma zuwa Jagorar Mai Amfani da Mai ƙera Mai ƙera Mai saka idanu don matakai kan yadda ake cire Nuni daga Dutsen VESA.

Haɗa madaidaicin VESA Panel

Don saukar da daban Nunawa zane-zane, HANKALI ya zo da saiti huɗu na Sukurori cewa daban -daban tsawo da diameters:

• M4 x 35mm Dunƙule x 4
• M5 x 35mm Dunƙule x 4
• M4 x 16mm Dunƙule x 4
• M5 x 16mm Dunƙule x 4

Don zaɓar Sukurori wanda ya dace da Nunawa, kammala wadannan:

• Ayyade ko Nuni na VESA Mount Holes suna ruwa ko a ciki. Za a buƙaci faranti na ciki
• Ƙarfi da/ko Tashoshin Bidiyo located ja ruwa a baya na Nunawa zai buƙaci amfani da 20 mm sarari.
• Ƙayyade tsawon da ya dace Dunƙule da ake buƙata ta ƙara zurfin Ramukan hawa a kan Nunawa, tsawon adadin da ya dace na Sararin samaniya, da kauri daga cikin Tabbataccen VESA Panel.
• Ƙayyade diamita mai dacewa na Dunƙule da ake buƙata ta hanyar gano diamita na Ramukan hawa a kan Wannan bayanin ana iya yiwa shi lakabi a bayan na Nunawa. Ko kuma, ana iya samun sa a ciki Manual mai amfani domin Nunawa.
  Lura: Guda huɗu na Sukurori (an haɗa) ƙila bazai dace da kowane yanayin shigarwa ba. Ƙari Sukurori (wanda aka sayar daban) na iya buƙatar samo asali don shigarwa na musamman.

1. Cire Filayen Filayen Blue daga Tabbataccen VESA Panel.
2. Cire Dutsen VESA daga Kula da Dutsen. Idan da Dutsen VESA ba ya fita daga Kula da Dutsen, cire Kula Dutsen daga Yin hawa
   Lura: Koma zuwa ga Kula da Jagorar Mai Amfani da Dutsen Mai ƙera don matakai kan yadda ake cire fayil ɗin Dutsen VESA or Kula da Dutsen.
3. Matsayin Nunawa, gefen allo ƙasa, kan a Tsabta, Flat, da Barga Surface.
   Tukwici: Shigarwa yakamata ya kasance kusa da wanda aka nufa Matsayin hawa. Wannan yana rage nisan Mutane Biyu dole ne tafiya tare da Tabbataccen VESA Panel Majalisa.
4. Ƙayyade idan Nunawa fasali 75 x 75 mm or 100 x 100 mm Space VESA Dutsen Ruwa.
5. (ZABI) Sanya lambar da ake buƙata Masu sarari sama da hudu Nuna VESA Ramukan hawa a bayan (Figure 1)
   Lura: Tabbatar da daidai Nuna ramukan hawa na VESA ana amfani da su.
6. Ƙayyade tsayin hawa da ake so Tabbataccen VESA Panel (ƙananan, tsakiya, babba) kuma yi bayanin daidai VESA Dutsen Ruwa.
7. Dagawa Tabbataccen VESA Panel a kan Tabbatar da saman saman m Kwamitin VESA yana fuskantar fuska iri ɗaya kamar saman saman Nunawa. Kasa da Tabbataccen VESA Panel yayin tabbatar da wanda aka zaba VESA Dutsen Ruwa daidaita tare da (na zaɓi) Masu sarari or Nuna ramukan hawa na VESA a bayan ta Nunawa.
8. Hanya ta Ƙarfi kuma Igiyoyin bidiyo domin Nunawa ta hanyar Gudanar da Kebul Ramin da kuma haɗa su zuwa Nunawa.
9. Zama daya Mai wanki akan ɗaya daga cikin Maimaitawar da ta dace don jimlar huɗu Dunƙule.
10. Saka Sukurori (da Wanki) ta hanyar Dutsen VESA, da Gaskiya VESA Panel, da (na zaɓi) Sararin samaniya, kuma cikin Nuna ramukan hawa na VESA.
11. Yi amfani da a Phillips Head Sukudireba don tsanantawa Dunƙule.
    Gargadi! Kada a ƙara matsawa Dunƙule. Idan an gamu da juriya, a daina matsewa. Rashin yin hakan na iya haifar da lalacewar Tabbataccen VESA Panel ko kuma Nunawa.
12. Haɗa da Ƙarfi kuma Igiyoyin bidiyo domin Nunawa zuwa ga Tushen wutar lantarki kuma Tushen Bidiyo.

Sanya Taron Majalisar VESA mai gaskiya

1. Hannun hannu ɗaya a ƙarƙashin Taron Majalisar VESA mai gaskiya don riko riko akan Amfani da dayan hannun riko da Tabbataccen VESA Panel.
   Tukwici: Yakamata a kammala wannan matakin ba tare da safofin hannu ba. The Tabbataccen VESA Panel Majalisa iya sauƙaƙe fita daga hannun safofin hannu.
2. Dagawa Taron Majalisar VESA mai gaskiya zuwa ga Matsayin hawa.
3. Sake maƙallin Dutsen VESA zuwa ga Kula da Dutsen.
4. Shafe duk wani Alamun yatsa a kan Taron Majalisar VESA mai gaskiya da a Microfiber Zane.

Aiki

Tsaftace Kwamitin VESA na gaskiya

• Shafe mai tsabta tare da Microfiber Zane.

Lura: Kada ku yi amfani Masu tsabtace Ammoniya don tsaftacewa Tabbataccen VESA Panel.

Kalaman Gargadi
Tabbatar kun tattara wannan samfurin gwargwadon umarnin.
Kada ku wuce ƙarfin nauyi na Dutsen Kulawa da aka yi amfani da shi tare da wannan samfur.
An yi nufin wannan samfurin don amfanin cikin gida kawai kuma kada a yi amfani da shi a waje.
Wannan samfurin baya tace hasken UV kuma yana iya amplify hasken rana. Yi taka tsantsan lokacin amfani da wannan samfurin kusa da asalin hasken halitta.
Kada kayi amfani da masu tsabtace ammoniya don tsabtace wannan samfur.

Amfani da Alamomin Kasuwanci, Alamomin Kasuwanci, da sauran Sunaye da Alamun Kariya
Wannan jagorar na iya yin nuni ga alamun kasuwanci, alamun kasuwanci mai rijista, da sauran sunaye masu kariya da/ko alamun kamfanonin ɓangare na uku waɗanda ba su da alaƙa ta kowace hanya zuwa StarTech.com. Inda suke faruwa waɗannan nassoshi don dalilai ne kawai kuma ba sa wakiltar amincewa da samfur ko sabis ta StarTech.com, ko amincewa da samfur (s) wanda wannan littafin ya shafi kamfanin na uku da ake tambaya. Ta haka StarTech.com ta yarda cewa duk alamun kasuwanci, alamun kasuwanci masu rijista, alamun sabis, da sauran sunaye masu kariya da/ko alamomin da ke ƙunshe cikin wannan littafin da takaddun da ke da alaƙa mallakin masu mallakarsu ne.
PHILLIPS® alamar kasuwanci ce mai rijista ta Kamfanin Phillips Screw Company a Amurka da wasu ƙasashe.

Bayanin Garanti
An goyi bayan wannan samfurin ta garantin shekaru goma.
Don ƙarin bayani kan sharuɗɗan garanti da sharuɗɗan samfur, da fatan za a duba www.startech.com/karanti.

Iyakance Alhaki
Babu wani hali da alhakin StarTech.com Ltd. da StarTech.com USA LLP (ko jami'an su, daraktoci, ma'aikata ko wakilai) ga kowane diyya (ko kai tsaye ko kaikaice, na musamman, ladabtarwa, na al'ada, sakamako, ko in ba haka ba). asarar riba, asarar kasuwanci, ko kowace asarar kuɗi, da ta taso daga amfani da samfur ko kuma ta haɗe da ainihin farashin da aka biya don samfurin.
Wasu jihohi ba sa ba da izinin keɓancewa ko iyakance lalacewa ta faruwa ko kuma ta haifar da lalacewa. Idan irin waɗannan dokokin sun yi aiki, iyakoki ko keɓantawa da ke cikin wannan bayanin bazai shafi ku ba.

StarTech.com Ltd. girma
45 Masu Yin sana'a
London, Ontario
Farashin N5V5E9
Kanada

StarTech.com LLP
4490 Kudu Hamilton
Hanya
Groveport, Ohio, Amurika
43125
Amurka

StarTech.com Ltd. girma
Raka'a B, Pinnacle 15
Gowerton Rd,
Brackmills
Arewaampton
Saukewa: NN4 7BW
Ƙasar Ingila

Takardu / Albarkatu

StarTech ARMPIVOTHD Fassarar VESA Panel - Nuni Guda [pdf] Jagorar mai amfani ARMPIVOTHD, Kwamitin VESA Mai Bayyanawa - Nuni Guda, Kwamitin VESA Mai Bayyanawa

Magana

• Manual mai amfani