DUNIYA NA sakawa
Littafin mai amfani
MAGANAR JARIDAR CULUMANSaukewa: CS-308

MUHIMMI!

Da fatan za a karanta wannan littafin a hankali kafin fara aiki da wannan rukunin a karon farko.
Haƙƙin haƙƙin da aka keɓe ga SEIKAKU. Za a iya canza duk fasalulluka da abun ciki ba tare da kafin lokaci Duk wani hoto, fassarar, ko sake buga wani ɓangare na kasidarsa ba tare da rubutaccen izini ba haramun ne. Haƙƙin mallaka © 2009 SEIKAKU GROUP

ALAMOMIN DA AKE NUFI DA TSIRA

Ana amfani da alamar don nuna cewa wasu tashoshi masu haɗari suna shiga cikin wannan na'urar, koda a ƙarƙashin yanayin aiki na yau da kullun.
Ana amfani da alamar a cikin takaddun sabis don nuna cewa takamaiman ɓangaren za a maye gurbinsa kawai ta ɓangaren da aka ƙayyade a waccan Takardun don dalilai na aminci.
Tashar ƙasa mai kariya.
Madadin halin yanzu / voltage.
Tasha mai haɗari mai haɗari .
A: Yana nuna na'urar da ke kunnawa.
KASHE: Yana nuna na'urar da ke kashewa, saboda amfani da maɓalli ɗaya, tabbatar da cire wutar AC don hana duk wani girgizar wutar lantarki kafin ci gaba da sabis ɗin ku.
GARGADI: Yana bayyana matakan kiyayewa waɗanda yakamata a kiyaye su don hana haɗarin rauni ko mutuwa ga mai amfani.
Kada a sanya zubar da wannan samfur a cikin sharar gari kuma ya zama tarin daban.
HANKALI: Yana bayyana matakan kiyayewa waɗanda yakamata a kiyaye su don hana haɗarin na'urar.
GARGADI

• Tushen wutan lantarki
  Tabbatar da tushen voltage yayi daidai da voltage na wutar lantarki kafin kunna na'urar.
  Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
• Haɗin Waje
  Wutar lantarki ta waje da aka haɗa zuwa tashoshi masu haɗari masu haɗari suna buƙatar shigarwa ta mutumin da aka umarce, ko amfani da shirye-shiryen jagora ko igiyoyi.
• Kar a Cire kowane Murfi
  Wataƙila akwai wasu wuraren da babban voltaga ciki, don rage haɗarin girgiza wutar lantarki, kar a cire kowane murfin idan an haɗa wutar lantarki. ƙwararrun ma'aikata ne kawai za su cire murfin. Babu sassa masu amfani a ciki.
• Fuse
  Don hana gobara, tabbatar da amfani da fuses tare da ƙayyadadden ƙayyadaddun ƙayyadaddun ƙayyadaddun wuta (na yanzu, voltage, irin). Kada a yi amfani da wani fiusi daban ko gajeriyar da'ira mariƙin fiusi.
  Kafin maye gurbin fuse, kashe na'urar kuma cire haɗin tushen wutar lantarki.
• Tushen Kariya
  Tabbatar cewa an haɗa ƙasa mai kariya don hana duk wani girgiza wutar lantarki kafin kunna na'urar. Kada a taɓa yanke waya ta ƙasa mai kariya ta ciki ko ta waje ko cire haɗin wayar ta tashar ƙasa mai kariya.
• Yanayin Aiki
  Kada a fallasa wannan na'urar ga ɗigowa ko fantsama kuma kada a sanya wani abu mai cike da ruwa, kamar vases, akan wannan na'urar.

Don rage haɗarin gobara ko girgizar lantarki, kar a bijirar da wannan na'urar ga ruwan sama ko danshi.
Kada ku yi amfani da wannan na'urar kusa da ruwa. Shigar daidai da umarnin masana'anta-r. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da na'urori masu auna firikwensin) waɗanda ke samar da zafi. Kar a toshe kowane buɗewar samun iska. Babu tsirara tushen harshen harshen wuta, kamar fitilu masu haske, da yakamata a sanya su akan na'urar.
MUHIMMAN UMURNIN TSIRA
* Karanta waɗannan umarnin.
«Bi duk umarnin.
* Rike waɗannan umarnin.
«Ku ji dukan gargaɗi.
Yi amfani da haɗe-haɗe-haɗe-haɗe-haɗe-haɗe-haɗe-haɗe/na'urorin haɗi kawai waɗanda masana'anta suka ƙayyade.
* Igiyar Wutar Lantarki da Toshe
Kar a kayar da manufar aminci na filogi mai nau'in polarized ko ƙasa. Filogi na polarized yana da ruwan wukake guda biyu tare da fiɗa ɗaya fiye da ɗayan. Nau'in filogi na ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin mabuɗin da aka daina amfani da shi. Kare igiyar wutar lantarki daga tafiya a kai ko a danne su musamman a matosai, madaidaitan ma'auni, da wurin da suke fitowa daga na'urar.
Tsaftacewa
Lokacin da na'urar ke buƙatar tsaftacewa, zaku iya busa ƙura daga na'urar tare da . ablower ko mai tsabta tare da rag da sauransu.
Kada a yi amfani da abubuwan kaushi kamar benzol, barasa, ko wasu ruwaye masu ƙarfi da ƙarfi da ƙarfi don tsaftace kayan aikin. Tsaftace kawai da bushe bushe.
Hidima
Koma duk hidima ga ƙwararrun ma'aikata. Don rage haɗarin girgiza wutar lantarki, kar a yi kowane sabis banda wanda ke ƙunshe a cikin umarnin aiki sai dai idan kun cancanci yin hakan.
Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar wutar lantarki ko toshe ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta fallasa ruwan sama ko danshi, ba ya aiki yadda ya kamata. ko kuma an jefar da shi.
Ana amfani da filogi na mains azaman na'urar cire haɗin, na'urar cire haɗin zata kasance cikin sauƙin aiki.
Da fatan za a karanta umarnin daki-daki kafin amfani, kuma bi abubuwan da ke ciki don yin shigarwa mafi dacewa. Bayan kun yi shigarwar da ta dace, da fatan za a kiyaye wannan umarni da kyau don abubuwan da kuke so a kowane lokaci.
Idan kuna son yin kowane canje-canje don shigarwa game da wannan samfurin, da fatan za a tabbatar idan ƙayyadaddun bayanai daidai ne ko a'a. In ba haka ba, shigarwar da ba daidai ba zai yiwu ya dawo da lalacewa ta dindindin ga wannan samfurin, saboda haka, da fatan za a yi amfani da shi tare da taka tsantsan.
Tsanaki:

1. Babu shakka kada a yi shigarwa wanda ya wuce ƙayyadaddun samfuran wannan saboda zai haifar da tasiri ga rayuwa da iya aiki dangane da wannan samfurin.
2. Ka nisanta daga wurin da ke jika da ruwan sama kai tsaye idan an girka a waje.
3. Kar a tsaftace bayyanar lasifikar shafi tare da kaushi na halitta ko kayan wanka na giya.
4. Kada ka gyara ko wargaza samfurin da kanka idan akwai wani lalacewa ko sabon yanayi, da fatan za a tuntuɓi mai kula da sabis nan da nan.

GABATARWA

C5-308 ƙwararriyar lasifi ce ta tsararrun lasifikar da SHOW ta haɓaka. Tare da raga na 1.0mm da 0.8mm grille, yana iya kare naúrar da kyau daga lalacewa ta waje kuma ya hana ƙura a cikin lasifikar. An yi majalisar ministoci ta plywood tare da nauyi mai sauƙi da ingantaccen tsari. Ana fesa fentin yashi mai kyau don yin laushi. taba. 8 guda 3 * na'urar ƙaho mai cikakken kewayon tare da mazugi na takarda na layi, zanen da ke kewaye da shi na iya cimma babban hankali. Tsarin yana amfani da masu canza wuta don canza wuta, yadda ya kamata ya kare raka'a. Don hana manyan siginar shigar da wutar lantarki raka'a lalacewa, ana iya amfani da su a layi daya don guje wa lalacewa ga PA amplifier tare da low impedance. Kulle madaidaicin screws zuwa kafaffen farantin cikin majalisar. Farantin gyarawa tare da kauri na mm 3 na baƙin ƙarfe na iya yin tasiri mai tasiri na lalata ƙarfin ja da shinge.

SHIGA

1. Tabbatar cewa baƙar fata masu hawa na iya yin fim don tallafawa samfura kafin shigarwa don guje wa cutar da kayan aiki da ma'aikaci idan akwai faɗuwa.
2. Tabbatar an shigar da madaidaicin madaidaicin kuma shigar da dunƙulewa a cikin wurin da aka gano.
3. Kulle madaidaicin (a haɗe) zuwa bango sosai kuma tabbatar yana tsaye tsakanin sashi da bango.
4. Cire skru 4#M8 akan baya na ginshiƙi kuma gyara shi zuwa raket ta skru (a haɗe). Da fatan za a sanya ginshiƙi madaidaiciya kuma a kulle da ƙarfi.
5. Daidaita ginshiƙi zuwa kusurwar da ta dace tare da madaidaiciyar kusurwa mai daidaitacce 0 ° ~ 30 %/ sararin sama 90° ~ 90°.
6. Da fatan za a fara tabbatar da tsarin da kuka haɗa fitarwa na 100V, 70V. Kuma daidaita canjin band zuwa daidaitaccen matsayi, kuma dole ne a haɗa siginar shigarwa daidai.

BAYANIN PANEL BAYA

FANIN GABA

SAURARA

FALALAR HADA SYSTEM

CH1/CH2 cike da 70V, shigarwar tashoshi biyu:

1. Zaɓi "MONO/DUAL" a "DUAL" matsayi, shigarwar tashoshi biyu;
2. CH1/CH2 fitarwa zaži a "70V" matsayi, dukansu lodi da rated 70V magana;
3. Zaɓi "L/H CUT" a "ON" matsayi, don hana ƙananan kariyar mitar da inganta ingantaccen watsawa. Aiwatar da Tsarin Adireshin Jama'a;

CH1/CH2 cike da 100V, shigar da tashar tashoshi biyu:

1. Zaɓi "MONO/DUAL" a "DUAL" matsayi, shigarwar tashoshi biyu;
2. CH1/CH2 fitarwa zaži a "100V" matsayi, dukansu lodi da rated 100V magana;
3. Zaɓi "L/H CUT" a "ON" matsayi, don hana ƙarancin kariyar mitar da inganta ingantaccen watsawa. Aiwatar da Tsarin Adireshin Jama'a;

BAYANIN FASAHA

Model Passive	CS-308 / CS-308W
Nau'in Tsari	Rukunin Array Speaker
Shigar da Voltage	70V / I 00V
Wutar da za a iya zabar Transformer	7.5W / 15W / 30W / 60W (I OOV / 70V)
Ƙarfin wutar lantarki (80)	120W RMS. Shirin 240W
Tsarin Tsari	70V 6670 / 3330 / 1670 / 830 80
	100V 13330 / 6670 1 3330 / 1670 80
Hankali (I MI I \A)	95dB ku
Max SPL (IM)	II 5.5dB (8ohms kirga)
Amsa Mitar (-6dB)	180Hz-I 8KHz
Mai magana	8 x3 ″ cikakken mai magana, 20mm Muryar Coil
Angle na ɗaukar hoto	220* (Horiz); 30* (Vert)
Haɗa	Phoenix
Ginin Kaya	Plywood cabiner, juriya fenti.0.8mm karfe gasa
Dakatarwa/Hawa	4 x M8 Makina Don Hawa
Girma (H xWx D)	730mm(28.8″) x 98mm(3.9″) x 130mm(5.1″)
Cikakken nauyi	7.5KG/ I 6.5Lbs
Na'urorin haɗi	Injin hexagon dunƙule M8 x 30 4PCS
	Filin jirgin saman Phoenix
	Firam ɗin tallafi

MUHIMMI!
Da fatan za a karanta wannan littafin a hankali kafin fara aiki da wannan rukunin a karon farko.
Haƙƙin haƙƙin da aka keɓe ga SEIKAKU. Za a iya canza duk fasalulluka da abun ciki ba tare da kafin lokaci ba
Duk wani kwafin hoto, fassarar, ko sakewa na sashin kasidarsa ba tare da rubutaccen izini ba haramun ne. Haƙƙin mallaka © 2009 SEIKAKU GROUP

SHOW® alamar kasuwanci ce mai rijista ta SEIKAKU TECHNICAL GROUP LIMITED
Kudin hannun jari SEIKAKU TECHNICAL GROUP LTD
NO.1 LANE 17, SEC.2, HAN SHI WEST ROAD, TAICHUNG 40151, TAIWAN
Lambar waya: 886-4-22313737
Fax: 886-4-22346757
www.show-pa.com
Farashin NF04814-1.1

Takardu / Albarkatu

NUNA CS-308 Column Array Speakers [pdf] Manual mai amfani CS-308 CS-308W

Magana

• Manual mai amfani