na'ura mai ba da hanya tsakanin hanyoyin sadarwa Push-Button Switc

KARSHEVIEW

The Push-Button SwitchPod (sPODM) jerin ƙananan voltage tashoshin bangon waya tare da daidaitattun firikwensin zama na Sensor Switch da fakitin wutar lantarki don aiwatar da kewayon aikace-aikacen sauyawa guda ɗaya da mataki-biyu. Waɗannan na'urori masu sauyawa suna ba da ingantacciyar hanya mai inganci da tsada ta tura ikon sarrafa hasken wutar lantarki biyu waɗanda suka dace da makamashi da lambobin gini ba tare da samun na'urori na musamman ko fakitin wuta ba.

SIFFOFI

• Yana ba da damar daidaitaccen firikwensin zama da za a yi amfani da shi don Manual Kan Aiki
• Madadin Amfani azaman Sauke Canjawa don Aikace-aikacen-Automa
• Salon Ado Gang Guda ɗaya w/ ko dai 1 ko 2 Kunnawa/Kashe
• Maɓallin danna-Laushe
• Mai shirye-shirye w/o Cire Farantin Canjawa
• Manual Dual Na zaɓi Kan Aiki
• Aiki Multi-Hey Na zaɓi
• Ikon Dimming 0-10 VDC na zaɓi
• Komawa ta atomatik zuwa matakin saiti na ƙarshe - akan na'urori masu lalacewa, yana komawa zuwa matakin ƙarshe na dim kafin a kashe

Garanti

Garanti mai iyaka na shekaru biyar.
Wannan shine kawai garanti da aka bayar kuma babu wasu bayanai a cikin wannan ƙayyadaddun bayanai
takardar ƙirƙira kowane garanti na kowane nau'i.
Duk sauran bayanan garanti da fayyace an soke su.
Cikakken sharuɗɗan garanti da ke: www.acuitybrands.com/support/warranty/terms-and-conditions
Lura: Ayyukan gaske na iya bambanta sakamakon yanayin mai amfani da aikace-aikace.
Ƙayyadaddun ƙayyadaddun bayanai suna canzawa ba tare da sanarwa ba

BAYANIN BAYANI

Bayanan Bayani na SPODM										Exampda: Bayanan Bayani na SPODM 347
Jerin		Dimming*		# of Sauyawa/Tsoffin on Oper.		Multi-Hanya*		Launi		Zazzabi / Danshi
Bayanan Bayani na SPODM Switchpod		[blank] Babu D Aikin Dimming		[blank] 1 Kunnawa ta atomatik SA 2P 1 Kunnawa/ Manual 2 Sauyawa (Pole 1 Manual / Pole 2 Auto) 2P 2 SA 2 Canjawa (Dukkan Sandunan Manual)		[blank] Babu 3X Multi-Way (misali hanya 3)		WH Fari IV GY AL Ivory Grey Almond mai haske BK Baki		[blank] Daidaitawa LT Low Temp

SIFFOFIN JIN KAI

(LURA: 18 AWG waya bada shawarar ga duk wayoyi)

MAGANIN MATAKI BIYU (MANUAL ON / AUTO ON) MAFITA w/ SENSOR: 1 GANG

MANHAJAR KAN W/ DIMMING & SENSOR OCCUPANCY

Lura: Idan firikwensin kuma yana da ƙarancin fitarwa (misali, CM 9 ADC), haɗa firikwensin VIO waya zuwa SPODM da ballast/driver VIO waya. Mafi ƙarancin matakin fitarwa koyaushe yana ɗaukar fifiko. Idan ba a yi amfani da firikwensin ba, haɗa farar waya ta SPODM zuwa jajayen wayoyi.

MANHAJAR HANYA 3 AKAN MAFITA w/ SENSOR

Bayanan kula 1: SPODM (SA) 3X D raka'a yakamata a yi amfani da su a aikace-aikace masu yawa tare da SPODM (SA) 3X raka'a (marasa dimming) kamar yadda ba a sadarwa matakan dimming tsakanin na'urori.
Bayanan kula 2: Don saitin hanyoyi masu yawa fiye da raka'a biyu, haɗa ƙarin naúrar(s) iri ɗaya
kamar kasa dama SPODM SA 3X naúrar a cikin zanen sama.
Bayanan kula 3: Idan ba a yi amfani da firikwensin ba, haɗa farar waya ta SPODM zuwa jajayen wayoyi.

UMARNIN SHIRYA

(Don Allah a karanta duk matakai 7 kafin shirye-shirye)

1. Shigar da yanayin shirye-shirye ta latsa & riƙe mafi yawan maɓalli har sai LED yayi walƙiya da sauri. Maɓallin saki.
2. Shigar da Ayyukan Kan Yanayin ta latsa maɓalli sau biyu.
3. Saitin Yanayin Kan na yanzu za a ciyar da shi cikin jerin filasha na LED kamar yadda aka nuna a teburin da ke ƙasa (misali, filasha ɗaya don Kunnawa atomatik). Don canza saitin, ci gaba zuwa mataki na 4 kafin jerin ya maimaita sau 10.
4. A kowane lokaci yayin da maɓalli ke walƙiya saitin Yanayin Kan na yanzu, katse shi ta latsa adadin sau don sabon saitin Yanayin da ake so kamar yadda aka nuna a teburin da ke ƙasa (misali, danna sau biyu don Kunnawa Manual). Canjawa zai fara walƙiya baya sabon saiti a matsayin tabbaci.
5. Na gaba, yayin da maɓalli ke walƙiya baya sabon saiti, katse shi ta latsawa da riƙe maɓallin har sai LED yayi walƙiya da sauri. Maɓallin saki.
6. A matsayin tabbaci na ƙarshe da kunna sabon saitin, danna maɓallin sau biyu.
7. LED zai haskaka sau biyu yana nuna yarda da sabon saiti. Idan ba a ga walƙiya biyu ba, maimaita tsari na matakai 7.

Lura: Don fita yanayin shirye-shirye ba tare da yin ajiya ba, jira jerin kiftawa baya don maimaita sau 10 sannan komawa mataki na 1.

Aiki Lamba	Aiki Suna	Saituna (duba odar oda don rashin kuskure)
		Saita Lamba	Sanda 1	Sanda 2 (Na'urorin 2P kawai)
2	Akan Yanayin	1	Kunnawa ta atomatik	Manual Akan
		2	Manual Akan	Kunnawa ta atomatik
		3 (na'urorin 2P kawai)	Manual Akan	Manual Akan
		4 (na'urorin 2P kawai)	Kunnawa ta atomatik	Kunnawa ta atomatik

BAYANI

Lantarki

• Ƙimar shigarwa 12-24VAC/VDC, 5mA
• Ƙididdiga masu fitarwa sun ragu <20mA

Makanikai

• Girma 2.74"H x 1.68"W x 1.63"D (70mm x 43mm x 41mm) - baya haɗa da madaurin ƙasa
• Hawan Akwatin Ƙungiya Guda ko Ƙananan Voltage Ring
• Nau'in Haɗi Low Voltage Jagoranci

Muhalli 

• Garanti Yanayin Aiki -22°F zuwa 185°F (-30°C zuwa 85°C)
• Dangantakar Dangantaka Har zuwa 90%, Mara Ƙarfafawa
• Matsayi / Ma'auni RoHS

Gabaɗaya

• Matsayi / Ma'auni CEC Take 20

Acuity Brands | Ɗayan Lithonia Way Conyers, GA 30012
Waya: 800.535.2465 www.acuitybrands.com/sensorswitch
© 2014-2022 Acuity Brands Lighting, Inc.
An kiyaye duk haƙƙoƙi. Rana 03/08/22

Takardu / Albarkatu

Sensorswitch Push-Button SwitchPod [pdf] Jagoran Jagora Tura-Button SwitchPod, Tura-Button, SwitchPod

Magana

• Manual mai amfani