Mix UART mara waya zuwa Module UART
Manual mai amfani 

directory

Siffar Module da girma …………………………………………………. 11
Halayen Module………………………………………………………………………………………………………………
Pin definition …………………………………………………………………………………………………………. 2 22
Yadda ake amfani…………………………………………………………………………………………………………………………………………………………………………………………………………

RF LINK-Mix Wireless UART-to-UART babban rukunin mara waya ne mai sauƙin amfani wanda ke ba masu amfani damar saita na'urorin UART da sauri don watsa nesa. Ba kwa buƙatar saita igiyoyi masu tsayi da yawa kamar yadda babban suite UART ke yi, kawai kuna buƙatar haɗa UART ROOT board na RFLINL-Mix zuwa babban allo (Arduino, Raspberry Pi, kowane HOST), da UART. allon na'urar RF LINK-Haɗa zuwa na'urorin UART, sannan tsarin mara waya yana shirye don tafiya.

Siffar Module da girma

Tsarin RF LINK-Mix UART-to-UART ya ƙunshi yanki na ƙarshen Tushen UART (gefen hagu). Har zuwa na'urar UART guda hudu tana ƙare (a gefen dama na hoton da ke ƙasa, mai lamba 0 zuwa 3 Ko da yake bayyanar nau'ikan biyu iri ɗaya ne, kowane nau'in ana iya gano shi ta alamar a baya.

Kamar yadda aka nuna a cikin hoton da ke ƙasa, adadi na hagu shine ɓangaren ɓangaren, sauran kuma gefen lakabin
Adireshin rukunin wannan rukunin RF LINK-UARTROOT modules shine 0002, ƙimar baud 9600.
Na'urorin UART kamar Na'ura 0, Na'ura 1, Na'ura 2, Na'ura 3, Adireshin Rukuni shine 0002.

Halayen module

1. Ƙa'idar aikitage: 3.3 ~ 5.5V
2.  Mitar RF: 2400MHz ~ 2480MHz.
3. Amfanin wutar lantarki: 24mA@ +5dBm a yanayin TX da 23mA a yanayin RX.
4. Ikon watsawa: +5dBm
5. Nisan watsawa: kimanin 80 zuwa 100m a cikin sararin samaniya
6. Baud Rate (TUSHEN UART): 9,600bp ko 19,200bps
7. Girma: 25mm x 15mm x 2mm (LxWxH)
8. Yana goyan bayan canja wurin 1-zuwa-1 ko 1-zuwa-yawan (har zuwa huɗu), kuma ana amfani dashi a yanayin umarni lokacin da aka yi amfani da 1-zuwa-multiple Command yana zaɓar wace na'urar da za a watsa da ita.

Ma'anar fil

Tushen UART	Na'urar UART
GND Kasa +5V 5V girmatage shigar TX yayi daidai da RX na Mai watsa shiri UART RX yayi daidai da TX na Mai watsa shiri UART CEB Wannan CEB ya kamata ya haɗa zuwa ƙasa (GND), sannan tsarin zai ba da ƙarfi kuma ana iya amfani dashi azaman aikin sarrafa wutar lantarki. The OUT Fitar fitarwa na Port IO (A kunne/Kashe fitarwa) IN Fitin shigar da tashar tashar IO (A kunne/Kashe karɓa). CMD_Mode Tushen don fil ɗin farawa yanayin umarni, ƙananan aiki	GND Kasa +5V 5V girmatage shigar TX yayi daidai da RX na na'urar UART RX yayi daidai da TX na na'urar UART CEB Wannan CEB ya kamata ya haɗa zuwa ƙasa (GND), sannan tsarin zai zama mai kunnawa kuma ana iya amfani dashi azaman aikin sarrafa wutar lantarki. The OUT Fitar fitarwa na Port IO (A kunne/Kashe fitarwa) IN Fitin shigar da tashar tashar IO (A kunne/Kashe karɓa).

Yadda ake amfani

Kuna iya amfani da wannan tsarin RF LINK-Mix UART-to-UART don sarrafa nau'ikan na'urorin UART da yawa da kuma mara waya ta hanyar UART ta zahiri.

RF LINK-Haɗa amfani da UART-zuwa-UART misaliamples za a iya sauke daga hukuma website.

Takardu / Albarkatu

RFLINK RFLINK-Haɗa UART mara waya zuwa Module UART [pdf] Manual mai amfani RFLINK-Mix, UART mara waya zuwa Module UART, RFLINK-Haɗa UART mara waya zuwa Module UART

Magana

• Manual mai amfani